SAFE/LOCK BOX
BARSKA warrants this new safe/lock box to be free of defects in material and/ or
workmanship under normal use for a period of twelve (12) months from the date
product is purchased. This limited warranty is delimited to repair or replacement only.
This warranty does not cover damage caused by improper installation or maintenance.
BARSKA disclaims all liability for incidental or consequential damages resulting from
misuse, abuse, accident (such as dropping), re, ood, service or repairs other than
those performed by BARSKA, acts of nature, or arising out of any breach of this
warranty. Altering the product under any circumstances will automatically void the
warranty.
For service under this limited warranty, please have available the proof of purchase
and the purchase date and location as well as a detailed description of the problem.
This warranty is not transferable and only applies to the original purchaser with a proof
of purchase from BARSKA or from an authorized dealer. This warranty applies only to
products purchased within the United States, excluding Alaska, the Hawaiian Islands and
all U.S. territories in the Caribbean and the Pacic.
BARSKA will examine and go through troubleshooting procedures, product repair
or replacement of defective part(s) or units with new part(s) or provide a new unit, if
necessary, during the warranty period. Reasonable shipping/handling charges may
apply and are based on Barska sole discretion. Purchaser shall be required to prepay
Shipping/handling charges with a check or money order to BARSKA at time product is
returned. The Return Merchandise Authorization Number (RMA#) and shipping/handling
charge MUST be obtained from BARSKA in advance of return. BARSKA shall not be
liable for damages or loss occurring during shipping. Please visit via www.barska.com
or call 909.445.8168 to obtain the RMA#, Shipping/handling amount, and for more
information.
BARSKA reserves the right to modify or discontinue, without prior notice to the
purchaser, any model or style of the product. BARSKA will determine, at its sole
discretion, whether a product will be repaired or replaced. BARSKA reserves the right to
discontinue or change any feature of its products at any time. If an exact replacement
or product is not available, BARSKA reserves the right to provide a part or product that
matches as closely as possible.
LIMITATION OF REMEDIES
BARSKA disclaims any warranties, express or implied, whether of merchantability or
tness for a particular use, except as expressly set forth herein. The sole obligation of
BARSKA under this limited warranty shall be to repair or replace the covered product, in
accordance with the terms set forth herein. BARSKA expressly disclaims any lost prots,
general, special, indirect or consequential damages which may result from breach of
any warranty, or arising out of the use or inability to use any BARSKA product. Any
warranties which are implied and which cannot be disclaimed shall be limited in duration
to a term of one year from the date of original retail purchase.
Some states do not allow the exclusion or limitation of incidental or consequential
damages or limitation on how long an implied warranty lasts, so the above limitations
and exclusions may not apply to you.
BARSKA
855 Towne Center Drive, Pomona, CA 91767
BC767
1 YEAR LIMITED WARRANTY
08/24 ©2024 BARSKA®
©2024 BARSKA®
855 Towne Center Drive | Pomona, CA 91767
08/24
BC792
Biometric Touchscreen
Keypad Safe
2 3
Table Of Contents
Warnings 4
Parts Of The Safe 5
Parts of the Control Panel 5
Parts of the Inside of the Safe Door 5
Getting Started 6
Install Batteries 6
Lock/Unlock Safe 6
Unlock 6
Lock 6
Fingerprint/Password Set Up 7
Add Fingerprint 7
Change Fingerprint 7
Delete Fingerprint 7
Add Password 8
Change Password 8
Delete Password 8
Test Registered Fingerprint/
Password
8
Re-Set To Factory Default Mode 8
Password Anti-Peeping Technology 8
Alarms 9
Fingerprint Error 9
Password Error 9
Safe Unclosed 9
Low Battery 9
Lockout Mode 10
Mounting Instructions 10
Care and Maintenance 11
Warranty 12
4 5
WARNINGS
- In Factory Default mode, the safe CANNOT be opened by any ngerprint. For
security purposes, please promptly register your own ngerprint before starting
to use the safe. The initial Pin Code are 168 or 88888888. Kindly follow the
Fingerprint/Password Set Up to establish your personalized ngerprint/
password.
- Register at least two different ngerprints and test them a few times before
closing the safe door.
- Test with a non-registered ngerprint to ensure successful registration.
- Avoid leaving the door open and unattended, as it could allow unauthorized
individuals to reprogram the safe, gaining full access to its contents.
- Do NOT store combustible materials in this unit.
- In the event of a re, exercise caution when opening the safe. If you are unsure
about opening the safe due to its contents, contact your local re department
for assistance.
- Test the Emergency Keys and store them in a secure place outside of the safe.
- Test and ensure the safe works properly before mounting.
- It is recommended to check/change the battery every 4 to 6 months.
- Mount the safe before use, as it may tip forward if not properly mounted.
- Keep children away from the safe; they should not play with or around it at any
time. Children playing could accidentally get locked inside the safe or
inadvertently pull on the door, causing it to tip over if not properly mounted.
- Failure to follow these warnings could result in serious injury or death
NOTE
- BARSKA is not responsible for any damage or lost contents in the safe due
to moisture.
- BARSKA is not responsible if the safe or its contents gets lost or stolen.
Note: All information, feature, and specication displayed herein are based on the
data available at the time of publishing, thus they are subject to change without
notice. All product pictures displayed herein are for illustration purposes only. The
actual product may vary due to different circumstances
Parts Of The Safe
Parts of the Control Panel
A. Fingerprint Scanner
B. Keypad
C. Key Cover
To remove the key cover, gently press
down on the right side of the key
cover shape with one nger to
separate the magnetic cover from
the safe. With your other hand,
carefully remove the key
cover completely.
Parts of the Inside of the Safe Door
F. Set Button
G. Battery Compartment
H. Bolts
I.
*Actual model may vary
A
C
B
F
G
H
D E
I
LED Light
D. Key Access
E. Type-C Port for External
Power Supply
In the even of a battery
failure, can be accessed
from the power source.
6 7
Getting Started
First-Time User Guide
Step 1: Remove the Emergency Keys from the accessory package.
Step 2: To access the Emergency Key slot, remove the key cover (C).
Step 3: Insert the Emergency Key to key access (D) and turn it COUNTER-
CLOCKWISE to open safe.
The key has a small tip that needs to align with the hole, with the tip
positioned at the top.
NOTE
After completing the operation, please remove the Emergency Key and DO NOT
STORE IT INSIDE the safe.
Install Batteries
a. With the door open, slide off the battery cover (G) located on the side of
the door.
b. Insert 4 AA batteries, ensuring they are aligned with the “+” and “-” signs
as indicated.
c. Align the arrow on the battery cover with the arrow on the compartment, then
slide the battery cover back into place. Replace the battery compartment cover.
NOTE
Only use alkaline batteries; DO NOT use any other type.
DO NOT MIX alkaline and non-alkaline batteries.
DO NOT MIX new and old batteries.
Lock/Unlock Safe
Unlock
The smart safe features an automatic locking mechanism for convenient
unlocking and locking. You can unlock your safe using a registered ngerprint,
password, or backup emergency keys.
For example, to unlock the safe by password:
Enter password 168 then press “E” to conrm and unlock the safe.
Lock
Push the door fully closed and hold it for a few seconds until it automatically
locks.
Fingerprint/Password Set Up
Before utilizing this safe, it’s essential to familiarize yourself with the
following basics:
- Maximum of 9 ngerprints and 9 passwords.
- When setting a password, that it must consist of 3 to 8 digits.
- The touch keypad includes buttons for numbers 0 through 9,
“C” (cancel/end). “E” (conrm), each touch triggers a short beep.
- Prior to performing any operations, awaken the keypad by lightly touching it.
- Incorrect password or ngerprint attempts will result in consecutive beeps and
ashing on the keypad.
- If you re-register a ngerprint or password for an existing User number, it will
override the previous one.
Kindly follow the Fingerprint/Password Set Up to establish your personalized
ngerprint/password.
- Initial Password: 168 or 88888888 press “E” conrm to open the safe
- Initial Fingerprint: The safe CANNOT be opened by any ngerprint.
- The initial passwords, 168 and 88888888, will become inactive once the rst
ngerprint is registered.
Add Fingerprint
a. Short Press inside SET button 1 time, then press 2 on
the keypad;
b. Enter a User Number from 1-9;
c. Press a nger to the scanner 6 times to
register ngerprint.
d. Continue by entering another User number and repeat
Step C to register the next ngerprint;
e. Press C to end programming if you are not registering
multiple users.
Example: Register Fingerprint for User 3
Press Inside SET button and Press 2 on the Keypad, enter 3
and Press ngerprint on scanner 6 times and enter C.
The User 3 Fingerprint is registered.
Change
Fingerprint
a. Short Press inside SET button 1 time, then press 2 on the
keypad;
b. Choose the user number that you want to change;
c. Press a nger to the scanner 6 times to change ngerprint
d. Press C to end this programing
Delete
Fingerprint
a. Short Press inside SET button 1 time, then press 2 on the
keypad;
b. Choose the user number that you want to delete;
c. Press E to conrm this deletion;
d. Press C to end this programming
8 9
Test Registered
Fingerprint
a. Close the safe and Test a registered nger on the scanner
to ensure the safe unlocks, indicating successful
ngerprint registration.
b. Close the safe and Test a non-registered nger on the
scanner to ensure the safe remains locked, indicating
successful ngerprint registration.
Add Password
a. Short Press inside SET button 1 time, then press 3 on the
keypad;
b. Enter a User number from 1-9;
c. Input 3~8 digit password, press E to conrm;
d. Continue by entering another User number and repeat
Step C to register the next password;
e. Press C to end this programming.
Example : Register Password for User 4
Press Inside SET button and Press 3 on the Keypad, enter 4
and 3~8 digit password and enter E.
The User 4 Password is registered.
Change
Password
a. Short Press inside SET button 1 time, then press 3 on the
keypad;
b. Press the User number that you want to change and press
the User number
c. Input 3~8 digit New password, press E to conrm;
d. Press C to end this programing
Delete
Password
a. Short Press inside SET button 1 time, then press 3 on the
keypad;
b. Press the User number that you want to delete;
c. Press E to conrm this deletion;
d. Press C to end this programing.
Test Registered
Password
Close the safe and gently touch the keypad to activate it.
Enter the initial password 168 or 88888888 to ensure the
safe remains locked. Then, entering the registered password
to test if the safe unlock, indicating successful password
registration.
Re-Set To
Factory Default
Mode
Press and Hold the SET button inside for 5 seconds until you
hear beep sounds
Password Anti-Peeping Technology
This installed function protects your password from being seen by others,
ensuring the security. Free entering scrambling codes plus a real password to
confuse onlookers.
For example:
Scrambling code + Real password + scrambling code, Maximum 30 digits length
are allowed.
NOTE
Please use a mix of numbers to avoid easy-to guess sequences like “1234” or
“1111”.Alarm
Alarms
No. Alarm Description
1 Fingerprint Error
Every incorrect ngerprint access will cause the
keypad to ash three times and emit three beeps;
Six consecutive incorrect ngerprint entries will result
in the safe being locked for 1 minute.
Repeating six wrong entries will extend the lockout
to 5 minutes, and further repeats will extend it to 15
minutes.
2 Password Error
Every incorrect password entry will cause the keypad
to ash three times and emit three beeps;
Three consecutive incorrect password entries will
result in the safe being locked for 1 minute.
Repeating three wrong entries will extend the lockout
to 5 minutes, and further repeats will extend it to 15
minutes
3 Safe Unclosed
If the safe remains unclosed for more than 50
seconds, continuous beeps will sound and last 10
seconds.
Please ensure that your safe is closed properly.
4 Low Battery
When the battery is low, touching the keypad will
cause it to ash;
Please replace the batteries promptly.
10 11
Lockout Mode
If the number of incorrect password or ngerprint attempts exceeds the limit, your
safe will be locked. During this period, the keypad and ngerprint scanner will be
disabled.
- Three consecutive incorrect password and Six consecutive incorrect ngerprint
entries will result in the safe being locked for 1 minute.
- Repeating three wrong entries will extend the lockout to 5 minutes
- After shutting down 5 minutes, another three wrong entries will extend it to
15 minutes
Disable LOCKOUT MODE
a. Touching the keypad will display illuminated numbers, such as 1 and 5,
indicating that the lockout mode will automatically disable after a countdown of
15 minutes.
b. Alternatively, you can use the emergency key to open the safe.
c. After opening the safe, press INSIDE SET button once, then press the C key
on the keypad to manually disable the lockout status.
Mounting Instructions
The safe must be mounted to a wall or oor. Be aware of the load bearing.
Failure to do so can result in personal injury and/or damage to property. Use
appropriate tools when performing work and always use eye protection.
Floor Mounting
In order to mount the safe on the oor, please remove the feet at the bottom
rst. Use the hardware provided or consult your local hardware retailers for your
particular surface.
- Use proper drill tools depending on the type of oor.
- Measure the location of the pre-set drill holes, mark their exact position onto
the oor.
- Drill the appropriate size holes for the anchors you are using.
- Carefully press the anchor into the holes at this time.
- Mount the safe by running screws from inside of the safe and securing to
anchors; ensure the safe is mounted securely.
Wall Mounting
- Do not mount the safe without anchoring to the wall.
- Find the studs in the wall, at your desired location. Most studs are 16 inches or
24 inches apart.
- Check the wall for concealed wires or pipes.
- Measure the location of the pre-set drill holes; mark their exact position onto the
wall ensuring that the studs or anything else behind will not interfere.
- Drill the appropriate size holes for the anchors you are using.
- Carefully press the anchor into the holes at this time.
- Mount the safe by running screws from inside of the safe and securing to
anchors; ensure the safe is mounted securely.
Care and Maintenance
- To maximize the security and performance of the safe, keep keypad clean; use
a dry cloth to remove any smudges after each use.
- Keep liquids away from the control panel. Spills on the control panel will cause
damage and possibly electric shock.
- Secure safe in a proper area to prevent from falling and causing damage
or injury.
- Test registered ngerprints and passwords every 6 months.
- DO NOT disassemble the product.
- DO NOT use chemicals or cleaning agents to clean the safe.
