SAFE/LOCK BOX
BARSKA warrants this new safe/lock box to be free of defects in material and/ or
workmanship under normal use for a period of twelve (12) months from the date
product is purchased. This limited warranty is delimited to repair or replacement only.
This warranty does not cover damage caused by improper installation or maintenance.
BARSKA disclaims all liability for incidental or consequential damages resulting from
misuse, abuse, accident (such as dropping), re, ood, service or repairs other than
those performed by BARSKA, acts of nature, or arising out of any breach of this
warranty. Altering the product under any circumstances will automatically void the
warranty.
For service under this limited warranty, please have available the proof of purchase
and the purchase date and location as well as a detailed description of the problem.
This warranty is not transferable and only applies to the original purchaser with a proof
of purchase from BARSKA or from an authorized dealer. This warranty applies only to
products purchased within the United States, excluding Alaska, the Hawaiian Islands
and all U.S. territories in the Caribbean and the Pacic.
BARSKA will examine and go through troubleshooting procedures, product repair
or replacement of defective part(s) or units with new part(s) or provide a new unit, if
necessary, during the warranty period. Reasonable shipping/handling charges may
apply and are based on Barska sole discretion. Purchaser shall be required to prepay
Shipping/handling charges with a check or money order to BARSKA at time product
is returned. The Return Merchandise Authorization Number (RMA#) and shipping/
handling charge MUST be obtained from BARSKA in advance of return. BARSKA
shall not be liable for damages or loss occurring during shipping. Please visit via www.
barska.com or call 909.445.8168 to obtain the RMA#, Shipping/handling amount, and
for more information.
BARSKA reserves the right to modify or discontinue, without prior notice to the
purchaser, any model or style of the product. BARSKA will determine, at its sole
discretion, whether a product will be repaired or replaced. BARSKA reserves the
right to discontinue or change any feature of its products at any time. If an exact
replacement or product is not available, BARSKA reserves the right to provide a part or
product that matches as closely as possible.
LIMITATION OF REMEDIES
BARSKA disclaims any warranties, express or implied, whether of merchantability or
tness for a particular use, except as expressly set forth herein. The sole obligation
of BARSKA under this limited warranty shall be to repair or replace the covered
product, in accordance with the terms set forth herein. BARSKA expressly disclaims
any lost prots, general, special, indirect or consequential damages which may result
from breach of any warranty, or arising out of the use or inability to use any BARSKA
product. Any warranties which are implied and which cannot be disclaimed shall be
limited in duration to a term of one year from the date of original retail purchase.
Some states do not allow the exclusion or limitation of incidental or consequential
damages or limitation on how long an implied warranty lasts, so the above limitations
and exclusions may not apply to you.
BARSKA
855 Towne Center Drive, Pomona, CA 91767
BC767
1 YEAR LIMITED WARRANTY
08/24 ©2024 BARSKA®
©2024 BARSKA®
855 Towne Center Drive | Pomona, CA 91767
08/24
BC806
Biometric Touchscreen
Keypad Safe
2 3
Table Of Contents
Warnings 4
Parts Of The Safe 5
Parts of the Control Panel 5
Parts of the Inside of the Safe Door 5
Getting Started 6
Install Batteries 6
Lock/Unlock Safe 6
Unlock 6
Lock 6
Fingerprint/Password Set Up 7
Add Password 7
Add Fingerprint 7
Delete Password and Fingerprint 7
Alarm 8
Password / Fingerprint Error 8
Vibration Alarm 8
Low Voltage Alarm 8
Dual Code Opening 8
Mounting Instructions 9
Care and Maintenance 9
Warranty 10
4 5
WARNINGS
- In Factory Default mode, the safe CANNOT be opened by any ngerprint. For
security purposes, please promptly register your own ngerprint before starting
to use the safe. The initial Pin Code is 168. Kindly follow the Fingerprint/
Password Set Up to establish your personalized ngerprint/password.
- Register at least two different ngerprints and test them a few times before
closing the safe door.
- Test with a non-registered ngerprint to ensure successful registration.
- Avoid leaving the door open and unattended, as it could allow unauthorized
individuals to reprogram the safe, gaining full access to its contents.
- Do NOT store combustible materials in this unit.
- In the event of a re, exercise caution when opening the safe. If you are unsure
about opening the safe due to its contents, contact your local re department
for assistance.
- Test the Emergency Keys and store them in a secure place outside of the safe.
- Test and ensure the safe works properly before mounting.
- It is recommended to check/change the battery every 4 to 6 months.
- Mount the safe before use, as it may tip forward if not properly mounted.
- Keep children away from the safe; they should not play with or around it at any
time. Children playing could accidentally get locked inside the safe or
inadvertently pull on the door, causing it to tip over if not properly mounted.
- Failure to follow these warnings could result in serious injury or death.
NOTE
- BARSKA is not responsible for any damage or lost contents in the safe due
to moisture.
- BARSKA is not responsible if the safe or its contents gets lost or stolen.
Note: All information, feature, and specication displayed herein are based on the
data available at the time of publishing, thus they are subject to change without
notice. All product pictures displayed herein are for illustration purposes only. The
actual product may vary due to different circumstances
Parts Of The Safe
Parts of the Control Panel
A. Fingerprint scanner
B. Touch keypad
C. Key cover
To remove the key cover, gently
press down on the bottom of the key
cover shape with one nger to
separate the magnetic cover from
the safe. With your other hand,
carefully remove the key
cover completely.
D. Type-C port for external power
supply
In the event of a battery failure, can
be accessed from the power source.
E. Key Access
Parts of the Inside of the Safe Door
G. Battery compartment
F. Set button
H. Bolts
*Actual model may vary
A
C
B
D
E
F
G
H
6 7
Getting Started
First-Time User Guide
Step 1: Remove the Emergency Keys from the
accessory package.
Step 2: To access the Emergency Key slot, remove the Key
Cover (C).
Step 3: Insert the Emergency Key to key access (E) and turn it
CLOCKWISE to open safe.
NOTE
After completing the operation, please remove the key and DO NOT STORE IT
INSIDE the safe.
Install Batteries
a. With the door open, remove the battery cover (G) located on the side of
the door.
b. Insert 4 AA batteries, ensuring they are aligned with the “+” and “-” signs
as indicated.
c. Insert all batteries to battery compartment and securely replace the cover.
NOTE
Only use alkaline batteries; DO NOT use any other type.
DO NOT MIX alkaline and non-alkaline batteries.
DO NOT MIX new and old batteries.
Lock/Unlock Safe
Unlock
The smart safe features an automatic locking mechanism for convenient
unlocking and locking. You can unlock your safe using a registered ngerprint,
password, or backup emergency keys.
For example, to unlock the safe by password:
Enter password 168 then press “E” to conrm and unlock the safe.
Lock
Push the door FULLY CLOSED and hold it for a few seconds until it
automatically locks.
Fingerprint/Password Set Up
Before utilizing this safe, it’s essential to familiarize yourself with the
following basics:
- Maximum of 100 ngerprints and 10 passwords.
- When setting a password, that it must consist of 4 to 11 digits.
- The touch keypad includes buttons for numbers 0 through 9, “ * ” (cancel/end),
and “ # ” (conrm). Each touch triggers a short beep.
- Prior to performing any operations, awaken the keypad by lightly touching it.
- Incorrect password or ngerprint attempts will result in voice warning as ”
ngerprint / password error “
For security purposes, it’s advisable to set new passwords and ngerprints
before starting to use the smart safe.
Kindly follow the Fingerprint/Password Set Up to establish your personalized
ngerprint/password.
- The initial password 168
- Initial Fingerprint: The safe CANNOT be opened by any ngerprint.
- The initial password 168 will become inactive once the rst ngerprint
is registered.
Add Password
a. Short Press inside SET button 1 time, voice reminds
“Please input ngerprint or password”
b. Input your own code with 4 - 11 digits, press “ # “
to conrm
c. Voice reminds “Please enter the password again”, then
repeat the code and press “ # “ to conrm
d. Voice reminds “Password conguration successful”
e. You could choose to continue to set other passwords or
press “ * “ to end the setting process
Add Fingerprint
a. Short Press inside SET button 1 time, voice reminds
“Please input ngerprint or password”
b. Follow the voice alert & input your desired ngerprint
three times
c. Voice reminds “Fingerprint conguration successful”
d. You could choose to continue to set other ngerprints or
press “ * “ to end the setting process
Delete Password
and Fingerprint
Press and Hold the SET button on the inside for 5 seconds,
voice reminds “ initialization successful “, indicating all
registered passwords and ngerprints have been deleted.
The safe will return to Factory default setting.
8 9
Alarm
No. Alarm Description
1
Password /
Fingerprint Error
Voice reminds “Fingerprint error” or
“Password error” after each incorrect
ngerprint / Password access.
Entering the wrong password three times
or an unregistered ngerprint ve times will
trigger a 30-second alarm. Entering a correct
password or registered ngerprint will stop
the alarm.
2 Vibration Alarm
Touch to activate the keypad, press “ * “
to set one time Vibration Alarm (Vibration
Alarm need to be set after each time door
opening).
A strike to the door or a heavy shake to the
safe body will trigger a 30-second vibration
alarm. Entering a correct password or a
registered ngerprint will stop the alarm.
3 Low Voltage Alarm
The system detects the supply voltage,
while battery running low, there will be voice
reminds "please replace the battery".
Please replace the batteries promptly.
Dual Code Opening
Before setting this mode, please register at least 2 passwords or ngerprints.
Activate the keypad, press “1” and the SET button, voice reminds “enter high
security mode successfully”.
In this mode, the safe requires two codes to unlock, which can be a combination
of any registered password and ngerprint.
Repeat to press “1” and the SET button, voice reminds “cancel high security
mode successfully”.
Mounting Instructions
The safe must be mounted to the wall. Be aware of the load bearing. Failure to
do so can result in personal injury and /or damage to property. Use appropriate
tools when performing work and always use eye protection.
Wall Mounting
Do not mount the safe without anchoring to the wall
- Find the studs in the wall, at your desired location. Most studs are 16 inches or
24 inches apart
- Check the wall for concealed wires or pipes
- Measure the location of the pre-set drill holes; mark their exact position onto the
wall ensuring that the studs or anything else behind will not interfere
- Drill the appropriate size holes for the anchors you are using
- Carefully press the anchor into the holes at this time
- Mount the safe by running screws from inside of the safe and securing to
anchors; ensure the safe is mounted securely
Care and Maintenance
- To maximize the security and performance of the safe, keep keypad clean; use
a dry cloth to remove any smudges after each use.
- Test registered ngerprints and passwords every 6 months.
- Keep liquids away from the control panel. Spills on the control panel will cause
damage and possibly electric shock.
- Secure safe in a proper area to prevent from falling and causing damage
or injury.
- DO NOT disassemble the product.
- DO NOT use chemicals or cleaning agents to clean the safe
