TAFT1
User manual
Register your product and get support at:
www.philips.com/support
Turntable
EN 1
Contents
1
Important
Connect Philips Fidelio
FT1 turntable and FA3
speakers
Notice
Safety
2
2
3
Trademarks
3
2
Your turntable
Introduction
What's in the box
4
4
4
Overview of the turntable
5
14
3
Get started
Assemble the turntable
Turn on and off
Connect power
Connect via the RCA audio cable
8
8
Connect the headphone
4
Phono operation
Clear Bluetooth® pairing records
Replace the stylus
Listen to Bluetooth®
music
Connect Bluetooth®
Disconnect Bluetooth®
11
11
11
10
15
15
11
6
14
7
5
8
15
Play from vinyl records
11
12
Remove the dust cover
12
Stop playing vinyl records
11
Auracast™ operation
Auracast™ broadcast
Auracast™ connection
Disconnect Auracast™ broadcast
14
14
Bluetooth-Out operation
(BT-OUT)
Connect to Bluetooth enabled
device
16
Disconnect BT-OUT
16
16
11
Product speci�cations 29
12
Troubleshooting
30
13
Play from disc
User guide
22
27
App download
22Pair the App with your turntable
17
19
Bluetooth® in & out connection
21
Wired connection (via RCA
audio cable)
10
Philips Entertainment
App
Select source
22
17
23
9
Firmware upgrade
27
Remote control
28
Select Auracast™broadcast
23
Select Bluetooth Out (BT OUT)
Select Clock Setting
23
Select CD/MP3 programming
24
Select Playback mode
25
Select Display brightness
25
26
2 EN
1
Important
Safety
Read and understand all instructions before
you use this turntable.
If damage is caused by failure to follow
the instructions, the warranty does not apply.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK).NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO OUALIFIED SERVICE PERSONNEL.
This 'bolt of lightning' indicates uninsulat-
ed material within the device may cause an
electrical shock. For the safety of everyone
in your household, please do not remove
the covering. The 'exclamation mark' calls
attention to features for which you should
read the enclosed literature closely to
prevent operating and maintenance
problems. WARNING: To reduce the risk of
�re or electric shock, the device should not
be exposed to rain or moisture and objects
�led with liquids, such as vases, should not
be placed on the device.
CAUTION: To prevent electric shock, fully
insert the plug. (For regions with polarized
plugs: To prevent electric shock, match
wide blade to wide slot.)
Warning
Never remove the casing of this apparatus.
Never lubricate any part of this apparatus.
Never look into the laser beam inside this
apparatus.
Never place this apparatus on other
electrical equipment.
Keep this apparatus away from direct
sunlight, naked �ames or heat.
Ensure that you always have easy access to
the power cord, plug or adaptor to discon-
nect the apparatus from the power.
Make sure that there is enough
free space around the product
for ventilation.
Only use attachments/accessories
specifed by the manufacturer.
The product shall not exposed to
dripping or splashing.
Do no place any source of danger
on the product (e.g. liquid �lled
objects. lit candles).
Where the MAlNS plug or an
appliance coupler is used as the
disconnect device, the disconnect
device shall remain readily operable.
Please use the product safety in an
environment with temperature
between 0°C and 40°C.
Note
The type plate is located on the
bottom of the product.
This is CLASS II apparatus with double
insulation, and no protective earth
provided.
CLASS I LASER PRODUCT
CLASS I LASER PRODUCT
CAUTION
-
CLASS 2 LASER RADIATION
WHEN OPEN DO NOT STARE
INTO THE BEAM (IEC60825-1/Class 2)
Class 2 Laser radiation when open.
Do not stare into the beam.
(Inside of the product)
(Class type vary by products. Please refer
to the actual product received.)
EN 3
Trademarks
The Auracast™ word mark and logos are
trademarks owned by Bluetooth SIG, Inc.
and any use of such marks by MMD Hong
Kong Holding Limited is under license.
Other trademarks and trs.
The making of unauthorized copies of
copy-protected material, including
computer programs, �les, broadcasts
and sound recordings, may be an
infringement of copyrights and
constitute a criminal offence. This
equipment should not be used for
such purposes.
The Bluetooth word mark and logos
are registered trademarks owned by
Bluetooth SlG, Inc. and any use of such
marks by MMD Hong Kong Holding
Limited is under license.
Notice
Any changes or modi�cations made to this
device that are not expressly approved by
MMD Hong Kong Holding Limited may void
the user’s authority to operate the product.
Hereby, TP Vision Europe B.V. declares that this
product is in compliance with the essential
requirements and other relevant provisions of
RED Directive 2014/53/EU and UK Radio
Equipment Regulations SI 2017 No 1206. You
can �nd the Declaration of Conformity on
www.philips.com/support.
This product complies with the radio
interference requirements of the
European Community.
This product is designed and
manufactured with high-quality
materials and components, which can
be recycled and reused.
This symbol means the product must
not be discarded as household waste
and should be delivered to an
appropriate collection facility for
recycling. Follow local rules and never
dispose of the product with normal
household waste.
Correct disposal of old products helps
prevent negative consequences for
the environment and human health.
This symbol means that the product
contains covered by European
Regulation 2023/1542 which cannot
be disposed of with normal house-
hold waste. Inform yourself about the
the local separate collection system
for electrical and electronic collection
system for electrical and electronic
products. Follow local rules and never
dispose of the product with normal
household waste. Correct disposal of
old products helps prevent negative
consequences for the environment
and human health.
Compliance
TAFT1
Turntable
2 Your turntable
Congratulations on your purchase, and
welcome to Philips! To fully bene�t from
the support that Philips offers, register
your product at www.philips.com/support.
What's in the box
Check and identify the contents of your
package:
EN 4
Introduction
With this turntable, you can
• Play from vinyl records;
•
Listen to music via Bluetooth;
•
Play music from Disc;
•
Enjoy music throught headphone;
•
Support Bluetooth out and Aux out;
•
Support Auracast™ broadcast;
•
Use App to control the unit.
• Main unit
• Dust cover
• Power cords x2
• Counterweight
• Platter (include belt)
• Slipmat
• 45 rpm adaptor
• Hinges x2
Quick start guide
•
•
Safety sheet
Warranty card
•
Note
• Power cord quantity and plug type vary by
regions.
Images, illustrations and drawings shown on
this user manual are for reference only. Actual
product may vary in appearance.
•
Drive belt
Safety
information
X 2
LED function status (see below table).
LED 1 indecator
Source led indicator.
1
LED 2 indecator
Auracast / Bluetooth out led indicator.
2
LED DISPLAY
3
1 2 3
EN 5
Overview of the turntable
Encrypted Auracast™ broadcast
Deactivated encrypted Auracast™
broadcast
Unencrypted Auracast™ broadcast
Deactivated unencrypted Auracast™
broadcast
Blink White (slow)
Solid White
Blink White (fast)
Standby
Power off
Pairing
Connected
Disconnected
Function status
Power
Bluetooth
Phono
Pattern
Solid Red
Off
Blink Blue (fast)
Solid Blue
Blink Blue (slowly)
LED
LED 1
LED 1
LED 1
LED 1
LED 1
LED 2
LED 2
LED 2
LED 2
LED 2
LED 2
LED 2
Pairing
Connected
Disconnected
Solid Amber
Solid Purple
Blink Amber (fast)
Blink Purple (fast)
Auracast™
Bluetooth out
Solid Light brown
Connected
CENTER SPINDLE
PLATTER
The position to place a vinyl record.
Press to power on and go to
last source.
Press and hold to turn on/off clock
display.
The spindle holds the turntable
platter stable and centered.
Fix the tone arm for protection
during non-use.
BUTTON
COUNTERWEIGHT
ANTI-SKATING KNOB
TONE ARM LIFT LEVER
TONE ARM CLIP
Use this rest to hold the tone arm
during non-use.
TONE ARM REST
Switch speed (33-1/3 & 45 RPM).
SPEED ROTARY KNOB
Balance the stylus pressure.
4
7
8
9
10
11
13
14
15
12
6
5
18 19 2016 17
6 EN
Overview of the turntable
12
Drive the stylus to slide above
the record.
TONE ARM
13
4 9
10
11
5
6
7
8
The anti-skating apply inward force
to the tone arm to prevent outward
skiiping across the record due to the
centrifugal force cause by platter
rotation.
Used to control the tone arm to rise
from/fall on a record surface
without endangering the surface of
the record and the stylus.
Press to play/pause.
Press twice to go to next track.
Press and hold to go fast forward.
HEADPHONE JACK
Connect the headphone.
23
AUX OUT JACK
Connect to external speaker
using an RCA cable (not included).
22
GROUND CONNECTOR
24
AC IN~
25
PRE-AMPLIFIER SELECTOR
SWITCH
This switch is used to change the
mode of phono output or line
output.
21
DUST COVER
26
21 22 23 24 25
26
EN 7
Press to enable to BT Out.
The cartridge (AT3600LA) is attached
to the headshell.
HEADSHELL AND CARTRIDGE
14
15
Press and hold to disable to BT Out.
Open/close CD tray.
PAIRING/
16
Press to switch source (Phono/Blue-
tooth/CD).
Press and hold (>3 seconds) for
Bluetooth pairing.
Press and hold (>8 seconds) to clear
Bluetooth
pairing history.
BT OUT
FINGER LIFT
17
18
Press and hold (>3 seconds):
Activate/Deactivate Auracast™
broadcast
Press and hold (>8 seconds):
Deactivate and exit Auracast™
broadcast private mode (if it’s
current selected mode).
19
20
Power input jack.
3
1 Assemble the platter on the unit.
8 EN
Get started
Caution
Use of controls or adjustments or
performance of procedures other than
herein may result in hazardous radiation
exposure or other unsafe operation.
Always follow the instructions in this
chapter in sequence.
Assemble the turntable
The belt is pre-installed under the
platter.
Turn the platter upside down, pull
the belt over the motor pulley.
Release your hand from the belt
once the belt on the motor pulley.
Slowly rotate the platter about ten
times by hand in the direction of
the arrow. Get rid of any twists in
the belt and make sure the belt
rides smoothly.
Place the slip mat on the platter.
Insert the counterweight into the
tone arm in the direction of the
arrow.
Gently parallelly pull the stylus
cover forward to remove.
Unlock the tone arm clip.
X
3
4
5
10x
2
9 EN
Tip
Use the lift lever to raise the tone
arm.
Use the lift lever to lower the tone
arm on the record to begin playing.
Insert the dust cover hinges into the
hinge pockets at two sides of the
dust cover.
Use the �nger lift to align the stylus
over the record.
Turn the counterweight on the back
of tone arm until the tone arm is �at
and balanced.
Move the tone arm back to the tone
arm rest. ONLY turn the number ring
in the direction of the arrow, until the
number ‘0’ is in the top most position.
Hold and rotate both the number
ring and the counterweight in the
direction of the arrow 1 1/2
rotations until the number ‘1’ is in
the top most position.
The number ring and counterweight
move separately from each other. Do
not turn the counterweight in this
step.
6
7
8
9
0
0
0.5
0
1
×
×
√
Note
To remove the dust cover, grasp the two sides of
the dust cover and slowly lift upward to remove
the cover together with its hinges.
EN 10
Insert the hinges completely into
the hinge bases located at the back
of the turntable.
Connect the RCA cable (not included)
to the external speaker.
RED plug - Plug into the
R-channel output.
WHITE plug - Plug into the
L-channel output.
This product has a built-in phono
equalizer feature. You can use the
product even if you do not have a
built-in phono ampli�er. Use the
pre-ampli�er selector switch on the
back of the turntable to set the
output as below.
If the audio device has a PHONO
input jack, set the switch to PHONO.
An audio signal from the MM
cartridge is output from the audio
cable without passing through the
phono preamp from the turntable.
The phono preamp for the audio
device is used.
If the audio device does not have a
PHONO input jack, set the switch to
LINE. The audio signal that passes
through the phono preamp from the
turntable is output from the audio
cable.
Tip
In BT/CD mode, using the
pre-ampli�er selector switch is
not necessary.
With PHONO Without PHONO
Connect via the RCA audio
cable
Turn On and Off
4
Play from vinyl records
1
2
3
Place the unit on a �at and level
surface.
Place the slipmat on the platter
before placing the vinyl record.
Use the speed switch next to tone
arm to adjust the speed (33-1/3,
45 RPM) to match the record.
Phono operation
Note
The turntable switches to standby mode
after 15 minutes inactive.
11 EN
Caution
Risk of product damage! Ensure that the
power supply voltage corresponds to the
voltage printed on the back or the under-
side of the unit.
Risk of electric shock! Before you plug the
adaptor, make sure that the plug is �xed
securely, when you unplug the adaptor,
always pull the plug, never pull the cord.
Before you connect the adaptor, make
sure that you have completed all the
other connections.
Connect power
Connect the power adapter to the
wall outlet.
Press to power on, and go
to last source.
Press the PAIRING/ button to switch
the source.
Phono/Bluetooth /Disc.
The unit switches to standby.
Press the button to switch the unit
on.
Press the button to switch the unit
off.
Connect the headphone
Connect the headphone/ earphone
through the headphone jack on the
back of your turntable.
Stop playing vinyl records
4
1
5
Gently parallelly pull the stylus
cover forward to remove before
playing. Unlock the tone arm clip,
and use the lift lever to raise the
tone arm.
2
3
6
Use the �nger lift to align the
stylus over the record.
8
Use the lift lever to lower the
tone arm on the record to begin
playing.
Replace the stylus
Place your �ngers at the tip of the
stylus and push down to the
direction ’A’.
Removing the stylus from the tone arm:
EN 12
Caution
1
Press PAIRING/ button to Phono
source.
Lower the lift lever, and lock the
tone arm clip to �x it.
Install the stylus cover to protect
the stylus tip.
Use the lift lever to raise the tone
arm, and use the �nger lift to move
the tone arm back on the tone arm
rest.
Do not bend or force the stylus into
the cartridge.
Do not touch the stylus tip to avoid
injury to your hand.
Turn off the unit's power before you
replace the stylus.
Light brown
LED 1 turns solid light.
1
Pull the stylus out toward the
direction ’B’.
Hold the tip of the stylus and insert
the other edge by pressing toward
direction ‘C’, and push the stylus up
toward direction ‘D’ until it locks at
the tip.
Stylus model: AT3600 (not included).
Play from disc
13 EN
5
2
3
Press the PAIRING/ button
to CD source.
2
Press the button to open
the disc compartment.
3
Insert a disc with the label
side up.
4
Press the button to close the
disc compartment to start the
playback.
Press the button on the
product to play/pause the
track.
Press the button twice
on the product to the skip
to next track.
Press and hold button on
the product to go fast forward.
D
[DISC] is displayed.
Remove the dust cover
1
Open the dust cover.
2
Lift up the dust cover from the
hinge base.
Press the PAIRING/ button to
switch to Bluetooth source.
LED 1 blinks blue.
LED 1 blinks blue.
1
2
Select on
your Bluetooth enabled device.
[ Philips Fidelio FT1 ]
3
EN 14
Listen to
Bluetooth® music
Connect Bluetooth®
Disconnect Bluetooth®
Play the audio from your device.
Deactivate Bluetooth on your
device.
Press and hold the PAIRING/
button on the unit for 3 seconds
to enter pairing mode.
Press and hold the PAIRING/
button on the unit for 8 seconds
in disconnect mode.
Note
Compatibility with all Bluetooth devices
is not guaranteed.
Any obstacle between the unit and the
device can reduce the operational
range.
The effective operation range between
this unit and your Bluetooth enabled
device is approximately 10 meters (free
space).
Press the buttons on the
product or your device to
play/pause the track.
Press the button on the
product twice on the product
to skip to next track.
After successful pairing and
connection, the Bluetooth
indicator turns solid blue, and
you will hear the prompt
sound from the unit.
6
Clear Bluetooth® pairing
records
Blue
1
2
EN 15
Auracast™
operation
You can broadcast your music from this
turntable to any other Auracast
™
compatible products.
In Phono/Bluetooth/Disc source,
press and hold the button on
your turntable for 3 seconds or
select Source Control on Philips
Entertainment App ( /Auracast™
broadcast) to enter into Auracast
™
broadcast.
Disconnect Auracast™
broadcast
LED 2 blinks purple or amber.
Press and hold the button on
your turntable for 3 seconds to
exit Auracast broadcast from your
turntable.
7
Auracast
™
broadcast
Press the PAIRING/ button to
switch to Phono/Bluetooth/Disc
source.
On Philips Entertainment App, enter
General Settings, select Public (unen-
crypted broadcast) or Personal
(encrypted broadcast) from Auracast
™
broadcaster.
3
4
You can broadcast to any number
of Auracast
™
enabled products.
Follow the instruction to enable
Auracast
™
connection.
When unencrypted broadcast is
selected, LED 2 turns solid purple
and you will hear the prompt
sound from your turntable.
When encrypted broadcast is
selected, LED 2 turns solid amber
and you will hear the prompt
sound from your turntable.
If Auracast broadcast channel is
encrypted, Auracast recceiver
products are required to enter the
password in order to listen to it.
EN 16
Disconnect BT-OUT
Bluetooth-Out
operation (BT-OUT)
3
4
5
LED 2 turns solid white.
The turntable starts to scan and
pair to the nearest Bluetooth
enabled device or device with
the strongest signal automati-
cally.
Once connected, you will hear
the prompt sound from the
turntable.
Press and hold BT OUT button on the
turntable for 3 seconds.
Note
8
If the pairing fails, press BT OUT
button again to perform the
scanning of Bluetooth enabled
devices.
LED 2 turns from solid white
to blinking white.
Ensure your Bluetooth enabled
device is in pairing mode.
1
2
Connect to Bluetooth
enabled device
In Phono/Disc source, press BT OUT
button to enter Bluetooth out
pairing mode.
LED 1 blinks white.
Press the PAIRING/ button to
switch to Phono/Disc source.
17 EN
9
Connect Philips
Fidelio FT1
turntable and FA3
speakers
This section helps you connect Fidelio FT1
turntable and FA3 speakers.
Connection Go to page
Auracast
™
connection 17
Bluetooth In & out connection 19
Wired connection 21
Fidelio FT1
Fidelio FA3
Fidelio FT1
Fidelio FA3
L - AUX OUT - R
Fidelio FT1
Fidelio FA3
L - AUX IN - R
1
Press the PAIRING/ button to switch to
Phono/Bluetooth/Disc source.
2
In Phono/Bluetooth/Disc source, press and
hold the button on your turntable for 3
seconds or select Source Control on Philips
Entertainment App ( /Auracast
™
broadcast) to enter into Auracast
™
broadcast.
On Philips Entertainment App, enter General
Settings, select Public (unencrypted broadcast)
or Personal (encrypted broadcast) from
Auracast
™
broadcaster.
• When unencrypted broadcast is selected,
LED 2 turns solid purple and you will hear
the prompt sound from your turntable.
Auracast
™
connection
A
FT1
EN 18
• When encrypted broadcast is selected, LED
2 turns solid amber and you will hear the
prompt sound from your turntable.
3
You can broadcast to any number of
Auracast
™
enabled products. Follow the
instruction to enable Auracast
™
connection.
4
If Auracast broadcast channel is encrypted,
Auracast recceiver products are required to
enter the password in order to listen to it.
• Once connected, LED on Auracast
™
enabled products (Fidelio FA3) will turn
solid Cyan.
5
Press the PAIRING/ button to switch
between Phono/Disc/Bluetooth to play
different audio sources.
• Press and hold the button on your
turntable for 3 seconds to exit Auracast
broadcast from your turntable.
LED 2 blinks purple or amber.
Disconnect Auracast
™
broadcast
Fidelio FA3
L
Cyan
R
Cyan
1
On your device that supports Auracast
™
broadcast, follow the instructions to enable
Auracast
™
broadcast.
2
Press BT/ on the remote control or
SOURCE at the back of the primary speaker
to select Auracast
™
receiver mode.
You will hear a prompt sound.
LED blinks cyan.
3
If the speaker is switched on to Auracast
™
receiver mode for the �rst time or the station
list is empty, the speaker will automatically
start scanning, then the unencrypted
broadcast with the strongest signal is
broadcast automatically.
LED turns solid cyan.
4
If you want to receive encrypted broadcasts
on your Auracast
™
broadcast device, follow
the instructions for your Auracast
™
broadcast
device and enter the password for your
Auracast
™
broadcast device.
HDMI ARCUSB AUDIO OPTICAL IN
SOURCE
AC IN~
SECONDARY
PAIRING
COAXIAL TO
SECONDARY
VOLUME
L R
AUX IN
Designed in the Netherlands
PRIMARY
SOURCE
Settings
Broadcast name
Unencrypted Auracast
Start broadcast
Settings
Broadcast name
Password
Encrypted Auracast
****
Start broadcast
FA3
EN 19
1
Press the PAIRING/ button to switch to
Phono/Disc source.
2
In Phono/Disc source, press BT OUT
button to enter Bluetooth out pairing
mode
.
LED 1 blinks white.
3
Ensure your Bluetooth enabled device is in
pairing mode.
4
The turntable starts to scan and pair to the
nearest Bluetooth enabled device or device
with the strongest signal automatically.
5
Once connected, you will hear the prompt
sound from the turntable.
B
FT1
Bluetooth In & out
connection
• Switch to another source on the unit.
• Deactivate Auracast
™
broadcast on your
Auracast
™
broadcast device.
If the disconnection is successful,
LED blinks cyan.
Disconnect Auracast
™
receiver
Note
• When Auracast
™
receiver is connected, press
SOURCE at the back of the primary speaker for 3
seconds to rescan Auracast
™
broadcast channels.
• When Auracast
™
receiver is connected to multiple
Auracast
™
receiver channels, press SECONDARY
PAIRING button at the back of the primary
speaker to switch to the next unencrypted
Auracast
™
broadcast channel.
5
Use the supplied remote control to control
play.
• To increase or decrease the volume, press
VOL+/-.
LED 2 turns solid
white.
20 EN
Note
• If the pairing fails, press BT OUT button again to
perform the scanning of Bluetooth enabled
devices.
Press and hold BT OUT button on the turntable
for 3 seconds.
LED 2 turns from solid white to blinking
white.
Disconnect BT-OUT
1
Press BT/ on the remote control or
SOURCE at the back of the primary speaker
to select Bluetooth mode and enter pairing
mode.
LED blinks blue.
2
If connected successfully:
You will hear a prompt sound.
LED turns solid blue.
3
Play music via your device.
Use the supplied remote control to control
play.
• To increase or decrease the volume, press
VOL+/-.
• To pause/resume playback, press BF.
• To skip to a track, press G/H.
Blue
Blue
HDMI ARCUSB AUDIO OPTICAL IN
SOURCE
AC IN~
SECONDARY
PAIRING
COAXIAL TO
SECONDARY
VOLUME
L R
AUX IN
Designed in the Netherlands
PRIMARY
SOURCE
Blue
FA3
21 EN
1
Connect the RCA cable (not included) to the
external speaker.
RED plug - Plug into the R-channel
output.
WHITE plug - Plug into the L-channel
output.
2
Set the switch to LINE output at the back of
Fidelio FT1 as below.
C
FT1
Wired connection
(via RCA audio cable)
LINE PHONO
1
Connect L-AUX IN-R sockets at the back of
the primary speaker to AUX OUT sockets on
Fidelio FT1 with an RCA cable (not provided).
2
Press AUX on the remote control or SOURCE
at the back of the primary speaker to select
AUX in mode.
LED turns solid pink.
3
Use the supplied remote control to perform
basic controls of the speakers.
• To increase or decrease the volume, press
VOL+/-.
HDMI ARCUSB AUDIO OPTICAL IN
SOURCE
AC IN~
SECONDARY
PAIRING
COAXIAL TO
SECONDARY
VOLUME
L R
AUX IN
Designed in the Netherlands
PRIMARY
L - AUX IN - R
L - AUX OUT - R
HDMI ARCUSB AUDIO OPTICAL IN
SOURCE
AC IN~
SECONDARY
PAIRING
COAXIAL TO
SECONDARY
VOLUME
L R
AUX IN
Designed in the Netherlands
PRIMARY
SOURCE
Note
• Please use RCA cable with a length not
exceeding 3M.
FA3
Pink
22 EN
Philips Enter-
tainment App
App download
Scan the QR code and press “Down-
load”button, or search “Philips Enter-
tainment” in the Apple App Store or
Google Play to download the app.
The Philips Entertainment App puts
you in charge of the music you are
listening to. You can use your smart
device to easily choose the sound style
you want, switch between sources, and
more.
philips.to/entapp
Launch the Philips Entertainment
App on your mobile device.
Make sure your mobile device is
enabled the Bluetooth setting.
If you connect the Philips Enter-
tainment App with your turntable
for the �rst time, you are asked to
pair the App with your turntable.
Press the button on your
turntable to enable the App to
discover and control it.
1
2
3
4
Pair the App with your
turntable
10
23 EN
Press icon on the App to select
Phono/CD/Bluetooth.
Select source
Select CD/MP3
programming
Select [CD/MP3 programming]
to enter CD/MP3 programming
setting.
Select Playback mode
Select [Playback mode] to enter
Playback mode setting.
Press icon on the App to
select Clock Setting.
Select Clock Setting
[24-Hr Time]: Set 12 or
24-hour time mode.
[Sync Clock]：When Sync clock
is enabled, the App will synchro-
nize the mobile clock to the
turntable upon their connection.
[Clock] : Option to swipe and
select the time on the clock
page.
24Hr Time is set by default.
Turn off [Sync Clock] so
that users can customize
the time for their micro
systems.
EN 24
Press icon on the App to to
enter General Settings list.
Select Display brightness
Select Public or Personal
broadcasts.
Select Auracast
TM
broadcast
1
Press icon on the App to
enter General Settings list.
2
EN 25
Enter password when Personal
(encrypted broadcast) is selected.
3
Select Bluetooth Out
(BT Out)
1
Press icon on the App to enter
General Settings list.
Press and hold button from
the turnable to enter Auracast
TM
pairing mode.
4
Enable [Bluetooth Out] and start
to scan.
2
Devices that are paired previously
will be shown in Paired devices and
not paired devices will be shown in
Discovered devices.
3
EN 26
User guide
Remote control
For more information about using this
unit, press icon on the App you
can �nd [User Manual] and [Quick
Start Guide].
Press icon to enter and use your
mobile device via Philips Entertain-
ment App as a remote control to
operate the turntable.
Select the device to connect
Bluetooth Out.
4
EN 27
Firmware Upgrade
To get the best features and support,
update your unit with the latest
�rmware version.
The �rmware for MCU can be
upgraded to the latest version via
Philips Entertainment app.
Please go to Firmware Update and
press Download & Update. If the
upgrade is released, the Download
& Upgrade icon can be pressed to
proceed automatically.
Once this product is connected to
Philips Entertainment app, it can
receive over-the-air �rmware update.
Always upgrade with the latest
�rmware version to improve the
performance of this unit.
EN 28
10
Product
speci�cations
Note
Product information is subject to change
without prior notice.
128 (depending on �le
name length)
CD-DA, CD-R,
CD-RW, MP3-CD (8/12 cm)
99
Disc
Supported MP3 disc format
Support disc type
Max. title number
Max. album number
32 kHz, 44.1 kHz, 48kHz
Supported sampling
frequencies
32~320 (kbps)
variable bit rates
Supported Bit-rates
EN 29
100-240V~ 50/60Hz
5 W
<0.8 W
420x130x370 mm
3.7 Kg
0-40
º
C
V5.4
A2DP, AVRCP
2402-2480 MHz
≤9 dBm
approx.10m
General information
Power supply
Power consumption
ECO power consumption
Dimensions (W x H x D)
Weight (Main unit)
Operating temerature
Bluetooth
®
Bluetooth
®
version
Bluetooth
®
pro�les
Bluetooth
®
frequency band
Maximum transition power
Bluetooth
®
range
20Hz-20KHz
1000 mV
Aux out
Freguency response
Output power
Turntable
33-1/3 RPM, 45 RPM
Turntable speeds
AT3600LA
Stylus model
Supported audio format
SBC, AAC, LC3
Turntable is spinning, but no sound
Check the volume.
Check if the source is switched to the
Phono properly.
Check if the stylus cover is removed
properly.
Check if the tone arm lift lever is
already pushed down to make it fall
on the record.
Bluetooth device cannot be connected
with this unit.
Check if the device does not support
the pro�les required for this unit.
Check if Bluetooth function of the
device is not enabled. Refer to the user
manual of the device to �nd out how to
enable the function.
Check if this unit is not in pairing mode.
Check if this unit is already connected
with another Bluetooth-enabled
device. Disconnect that device and then
try again.
11
Troubleshooting
Warning
Never remove the casing of this device.
To keep the warranty valid, never try to
repair the system yourself. If you
encounter problems when using this
device, check the following points
before requesting service. lf the problem
remains unsolved, go to the Philips web
page (www.philips.com/support). When
you contact Philips, make sure that the
device is nearby and the model number
and serial number are availaple.
Check if power adaptor of the unit is
connected improperly.
Check if there is power at the AC outlet.
No power
No sound
Check the volume.
Check if the source is selected properly.
Check if connecting cable is connected
properly.
Decline in turntable audio performance
Check if the turntable stylus is worn
out. Replace the stylus.
The audio quality is poor after connec-
tion with a Bluetooth-enabled device.
The Bluetooth reception is poor.
Move the device closer to this unit or
remove any obstacle between them.
Record sounds too fast or too slow
Check if the speed is selected
properly to match the vinyl record.
No response from the unit
Disconnect and reconnect the power
adaptor, then turn on the unit again.
As a power-saving feature, the system
switches off automatically 15 minutes
after track play reaches the end and no
control is operated.
EN 30
TAFT1_UM_V1.0
