680MM MODULAR POWER TOOL RACK
MODEL NO: APMS69
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY
WARNING! Ensure Health & Safety, and local authority regulations are adhered to when using this tool rack.
9 Keep the general area clean, uncluttered and ensure there is adequate lighting.
8 DO NOT attempt to wall mount the tool rack on your own.
8 DO NOT use the tool rack for any purpose other than that for which it is designed.
8 DO NOT clean the tool rack with any solvents or abrasives which may damage the coated surface.
8 DO NOT overload the tool rack.
9 Ensure that the tool rack is properly installed before loading it.
2. INTRODUCTION
Tough and durable rack specically designed for the storage of power tools. Five open fronted bays make the power tools easily accessible.
Fully welded with a hammered metal nish. Specically designed to t APMS wall cabinets and storage systems. Suitable for use with APMS53
and APMS65. Minimal assembly required.
3. FITTING
3.1. With the assistance of a second person:oer the tool rack up to the underside of the wall cabinet.
3.2. Secure with four xings through the cabinet into the tool rack.
APMS69 Issue 1 03/03/22
Original Language Version
© Jack Sealey Limited
Refer to
instructions
Wear protective
gloves
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500 01284 703534 sales@sealey.co.uk www.sealey.co.uk
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Remove
plastic
bung before
fitting rack
