Technical Support and E-Warranty Certificate www.vevor.com/support
HEAT PRESS MACHINE
We continue to be committed to provide you tools with competitive price.
"Save Half", "Half Price" or any other similar expressions used by us only represents an
estimate of savings you might benefit from buying certain tools with us compared to the major top
brands and does not necessarily mean to cover all categories of tools offered by us. You are
kindly reminded to verify carefully when you are placing an order with us if you are actually saving
half in comparison with the top major brands.
- 1 -
MODEL:SS1210
NEED HELP? CONTACT US!
Have product questions? Need technical support? Please feel free to contact us:
Technical Support and E-Warranty Certificate www.vevor.com/support
This is the original instruction, please read all manual instructions carefully before
operating. VEVOR reserves a clear interpretation of our user manual. The
appearance of the product shall be subject to the product you received. Please
forgive us that we won't inform you again if there are any technology or software
updates on our product.
HEAT PRESS MACHINE
- 2 -
Symbol
Symbol Description
Warning:
To reduce the risk of injury, the user must read the
instructions manual carefully.
This symbol, placed before a safety comment, indicates a kind
of precaution, warning, or danger. Ignoring this warning may
lead to an accident. To reduce the risk of injury, fire, or
electrocution, please always follow the recommendation shown
below.
CORRECT DISPOSAL:
This product is subject to the provision of European
Directive 2012/ 19/EC. The symbol showing a wheelie
bin crossed through indicates that the product requires
separate refuse collection in the European Union. This
applies to the product and all accessories marked with
this symbol. Products marked as such may not be
discarded with normal domestic waste, but must be
taken to a collection point for recycling electrical and
electronic devices.
WARNING
1.Warnings must be followed carefully to avoid body injury, improper
use may result in electric shock , fire, personal injury and other damage:
1)Keep unplug when moving the machine.
2)Keep unplug when installing accessories.
3)Place on a f at and stable platform and operate under ventilated
conditions.
4)Wear special protective equipment when operating the machine
5)Do not use this machine in a hazardous-location.
6)Do not use when the machine is not working properly.
7)Do not disassemble and repair this machine.
8)Do not use an unsuitable AC Outlet.
9)Do not touch the heating plate when the machine is heating
- 3 -
10)Do not use in a humid environment or contact with water Do not
infiltrate liquid in the machine to prevent fire or electric shock caused by
short circuit.
11)Do not use the power supply that does not meet the rated voltage. The
power supply that does not meet the specified voltage may cause fire or
electric shock.
12)Ensure that the machine is grounded so as not to cause harm to body.
13)Do not touch the rotating rod or bearing part with y ur fingers during
use in case of injuries.
14)If the machine is not in use for a long time, please unplug the power
cord from the socket.
15) Do not use the machine during thunderstorms or lighting to avoid
damage to the machine.
16)Place the machine smoothly on the flame-retardant table and keep
away from fl
am
mable and explosive items.
17)Please stop using it if the machine smokes, emits a peculiar smell , or
becomes noisy and
in other abnormal conditions.
18)This appliance can be used by children aged from 8 years and above
and persons with reduced physical, sensory or mental capabilities or
lack of experience and knowledge
if they have been given supervision or instruction concerning use of the
appliance in a safe way and understand the hazards involved. Children
shall not play with the appliance. Cleaning and user maintenance shall
not be made by children without supervision
19)Type Y attachment: If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons in order to avoid a
hazard.
20)In order to avoid a hazard due to inadvertent resetting of the thermal cutout,
this appliance must not be supplied through an external switching device, such
as a timer, or connected to a circuit that is regularly switched on and off by the
utility.
INTRODUCTION
A heat press machine is using temperature and pressure with a certain amount of time to
- 4 -
transfer designs onto items. The transfer is permanently embedded into the product. Thank
you for choosing t h e Heat Press Machine. Please read this user manual carefully and
keep it for future reference. If you need any assistance, please email us with your Amazon
order number and details.
FCC INFORMATION
CAUTION: Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the
equipment!
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
1) This product may cause harmful interference.
2)This product must accept any interference received, including interference
that may cause undesired operation.
WARNING: Changes or modifications to this product not expressly
approved by the party responsible for compliance could void the user's
authority to operate the product.
Note: This product has been tested and found to comply with the limits for a
Class B digital device pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This product generates, uses and can radiate radio frequency energy, and if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this product does
cause harmful interference to radio or television reception,which can be
determined by turning the product off and on, the user is encouraged to try to
correct the interference by one or more of the following measures.
· Reorient or relocate the receiving antenna.
· Increase the distance between the product and receiver.
· Connect the product to an outlet on a circuit different from that to which the
receiver is connected.
· Consult the dealer or an experienced radio/TV technician for assistance.
- 5 -
▶SPECIFICATION
Model
SS1210
Heat Plate Size
12x10 inch (300×260 mm)
Voltage
120V～ 60Hz
220-240V～ 50Hz
Power
800W
770W
▶Accessories list
- 6 -
▶Glance Features
On/Off button
Power on: After powering on, press the power button briefly to
turn on the machine, and it will automatically heat up.
Shutdown: Short press the power button to shut down.
Automatic shutdown: When there is no operation within 30
minutes, the machine will automatically shut down.
Temperature button
Temperature setting: After turning on, press the temperature
button briefly to enter the temperature setting, and press the+/-
button to set the parameters
Temperature unit conversion: After power on, long press the
temperature button for 3 seconds to enter temperature
conversion, and press the+/- button to select the temperature
unit.
- 7 -
Time setting: After turning on, press the time key briefly to
enter the time setting, and press the+/- key to set parameters.
Set time/temperature values to increase.
Set time/temperature values to decrease
Countdown button
▶Hot stamping parameters
- 8 -
▶Operation guide
Start hot stamping
1. Place the T-shirt to be printed on a
heat-resistant pad.
2. Place the pattern to be printed on the T-shirt
and secure it with heat-resistant tape.
Hot stamping steps
1. Ensure that the machine reaches the set
time temperature.
2. Grab the handle of the machine and move it
horizontally on the T-shirt.
3. Press the countdown button.
4. Use both hands to press the machine and
maintain stable pressure.
5.After the countdown is over, move the
machine away.
Small post:
If the appearance is too light, increase the
transfer time.
If the color is too dark, reduce the transfer
time.
Hot stamping completed
After printing, place the machine on the tray.
Be Careful
1. The tray must be stable.
2. It is prohibited to place flammable materials
around the pallet.
3. The machine will automatically shut down
after 30 minutes without human operation.
- 9 -
Manufacturer: Shanghaimuxinmuyeyouxiangongsi
Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu,
shanghai 200000 CN.
EC REP: E-CrossStu GmbH.
Mainzer Landstr.69, 60329 Frankfurt am Main.
UK REP: YH CONSULTING LIMITED.
C/O YH Consulting Limited Office 147, Centurion House, London Road,
Staines-upon-Thames, Surrey, TW18 4AX
Imported to AUS: SIHAO PTY LTD.
1 ROKEVA STREETEASTWOOD NSW 2122 Australia
Imported to USA: Sanven Technology Ltd.
Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730
