Thank you for your purchase!
Instructions
made easy
Register your
product
Discover more innovative
lighting at
www.enbrightenme.com.
Read instructions or watch
an easy-to-follow video.
Scan code or visit
byjasco.com/84122i.
Receive exclusive deals and
register your product.
Scan code or visit
byjasco.com/deals.
Having problems?
Let us know how we
can help.
Call 1-800-225-0653, M-F.
Like our product?
Leave a review on your
favorite retailer website
or amazon.com.
Galaxy Wave
Globe Light
Congratulations on your Enbrighten Galaxy Wave Globe Light! Transform your space with
the vibrant colors and immersive modes of this tabletop projector with night light. Please
read through all instructions and safety warnings before use — hold onto this manual in
case you need it later.
Model:
84122
NIGHT LIGHT AND PROJECTOR
WARRANTY INFORMATION
FCC
WARNINGS
Supplier Declaration of Conformity | Model #: 84122 | Jasco Products Co., 10 E. Memorial Rd., Oklahoma City, OK 73114,
www.byjasco.com
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may
not cause harmful interference, and (2) this device must accept any interference received, including interference that may
cause undesired operation.
FCC NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to
this equipment. Such modifications could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
IMPORTANT NOTE: To comply with the FCC RF exposure compliance requirements, no change to the antenna or the
device is permitted. Any change to the antenna or the device could result in the device exceeding the RF exposure
requirements and void user’s authority to operate the device.
• THIS PRODUCT IS NOT A TOY AND IS NOT INTENDED FOR USE BY CHILDREN. ADULT SUPERVISION IS REQUIRED
AT ALL TIMES WHEN CHILDREN ARE NEARBY.
• USE INDOORS ONLY. DO NOT EXPOSE THIS PRODUCT TO RAIN, MOISTURE OR WATER UNDER ANY
CIRCUMSTANCES.
• UNDER NO CIRCUMSTANCES SHALL ATTEMPTS BE MADE TO OPEN THE PROTECTIVE HOUSING OR OPERATE
THE DEVICE IF THE PRODUCT HAS BEEN DAMAGED.
• AS WITH ALL BRIGHT LIGHT SOURCES, WHEN YOU OPERATE THIS DEVICE IN UNSUPERVISED GENERAL PUBLIC
AREAS, IT IS RECOMMENDED THAT UP-CLOSE ACCESS TO THE LIGHT BE RESTRICTED OR PREVENTED AND THE
BEAMS BE DIRECTED INTO LOCATIONS WHERE PERSONS ARE NOT EXPECTED.
• IT IS THE OWNER/OPERATOR’S RESPONSIBILITY TO USE THIS DEVICE IN COMPLIANCE WITH LOCAL LAWS.
IMPORTANT — PLEASE READ
Refer to the manual or visit www.byjasco.com for limitations and restrictions on warranties and the product registration information.
This Jasco product has a 1-year limited warranty. Please contact our U.S.-based Consumer Care at 1-800-225-0653 (option 1), M-F
or www.enbrightenme.com/warranty if the unit should prove defective within the warranty period.
A. Projector
B. Night light
C. 5ft. USB-A to USB-C
power cord (USB-A
adapter not included)
D. Power
E. Night light ON/OFF
F. Mode
G. Color
H. Speed
MADE IN THAILAND
Distributed by Jasco Products Company LLC,
10 E. Memorial Rd., Oklahoma City, OK 73114.
©JASCO 2025 | 84122 | 03/12/25 v1
PATENTS/PATENTS PENDING
WWW.BYJASCO.COM/PATENTS
Night light mode contains colors inside the base while projection
mode shines the eects onto the ceiling and wall.
C
B
D
E
A
F
G
H
OPERATION
Insert the USB-C cable into the projector and a USB-A 5V, 2A
minimum port or adapter (not included). Position the light at any
angle using the base or sit the light upright on a flat surface without
the base.
Button Functions
OPERATION OPERATION
Projector Colors
Press and release to cycle through each color.
Order
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Color
Green/Blue/White
Red/Green/Blue
Red/Green/White
Red/Blue/White
Red/Green/Blue/White
Red
Green
Blue
White
Red/Green
Red/Blue
Red/White
Green/Blue
Green/White
Blue/White
Night Light Dimming
Press and hold to cycle through five brightness levels,
then release button once your preferred brightness level
has been reached. The night light will flash once upon
reaching maximum or minimum brightness.
Speed
Press and release to change how fast the lights move:
stop, slow, medium, fast, faster.
Return to Factory Settings
Press and hold for 5 seconds. The night light will flash
three times when reset is complete.
Power
Press and release to turn the projector on or o.
Projector and Night Light OFF
Press and hold for 2-3 seconds to turn o the projector
and night light simultaneously.
Memory Function
When light is turned o and on again, it will return to the
last mode and/or color scheme used.
Night Light ON/OFF
Press and hold for 2-3 seconds to turn night light on or
o. Alternately, once at least 30 seconds have passed
after color selection, the night light can be quickly turned
o with a quick press of the button.
Night Light Color Selection
Press and release within 30 seconds of turning night light
on to cycle through each color.
Order
1
2
3
4
5
6
7
8
9
Color
Color Blend
Red
Green
Blue
White
Orange
Purple
Cyan
Pink
Projector Modes
Press and release to cycle through each mode. To change a
mode’s color, press and release the COLOR button.
Projector Light Dimming
Press and hold to cycle through five brightness levels,
then release button once your preferred brightness level
has been reached. The light will flash once upon reaching
maximum or minimum brightness.
Steady on
Fade
Flash
Cycle
Pulse
Wave
Stays on chosen color or color combination
Slowly fades through all colors and is not
aected by pressing the COLORS button
Flashes through each color in the selected
color combination
Adds colors one by one, then fades
and restarts
Brightness slowly increases and decreases
Adds and removes colors one by one
