These instructions will guide you through the installation and registration process of the
following MOTOR products:
• Chek-Lube
• Crash Estimating Data Domestics
• Crash Estimating Data Imports
• Heavy Truck Service
• Parts and Labor Estimating
HARDWARE & SOFTWARE REQUIREMENTS
• 1GHz or higher Intel or AMD processor
• 2GB of RAM or higher (recommended)
• 19GB of available drive space
• 1 available USB A Port (1.1 or higher)
• Super VGA [1024×768] or higher resolution
• Windows 8 or 10
• Microsoft .NET Framework 2.0
• Microsoft .NET Framework 4.0
PRODUCT INSTALLATION
To initiate installation, place the flash drive in your computer’s USB port. This will load
the application, and the installation will begin automatically.
**Each flash drive can only be loaded & accessed from a single computer **
If this does not occur automatically, perform the following steps to manually begin
installation:
1. Open your File Explorer and navigate to the Electronic Product Folder on the
USB drive.
2. Launch the setup wizard (setup.exe).
NOTE:This may take may take several minutes.
3. Follow the prompts to complete installation.
PRODUCT REGISTRATION
After installation, you will be prompted to enter a registration code. Please complete
these steps to access your code:
1. Email a copy of your Matco purchase receipt to [email protected].
NOTE:You will not be able to complete your registration without completing this step.
2. Contact MOTOR Customer Service at 1-800-4A-MOTOR (800-426-6867) to
receive your code and finalize your registration.
Hours: Monday through Friday, 7:30 a.m. to 6:00 p.m. ET.
Please have the following information readily available when calling MOTOR Customer
Support:
• Company name
• Address
• Your contact information:
• First and last name
• Phone number
• Email address
