ELECTRIC FOLDING SCOOTER
OPERATION MANUAL
H1-ALP2
ALPHA 2.0
HELMETS
SAVE
LIVES!
Always wear a properly fitted helmet that
complies with CPSC or CE safety standards
when you ride your E-Scooter.
Correct Fit:
Make sure your helmet
covers your forehead.
Incorrect Fit:
Forehead is exposed and
vulnerable to serious
injury.
1
WARNING
As with all mechanical devices, the Hover-1 Alpha
2.0 is subject to wear and high stresses. Dierent
materials and components may react to wear or
fatigue in dierent ways. If the design life of a
component has been exceeded, it may suddenly
fail, possibly causing injuries to the rider. Any form
of crack, scratch, or change of coloring in highly
stressed areas indicate that the life of the
component has been reached and it should be
replaced. Do not ride in an abusive manner.
In this manual, the CAUTION sign indicates a
hazardous situation which, if not avoided, can cause
minor or moderate injury.
CAUTION
WARNING
In this manual, the WARNING sign indicates a
hazardous situation which, if not avoided, can cause
serious injury or death.
Great care should be taken with the Hover-1 Alpha 2.0
when folding and unfolding it. Moving and folding
parts can cut skin or pinch if mishandled.
DO NOT RIDE YOUR HOVER-1 ALPHA 2.0 WITHOUT
THE STEERING COLUMN, FOLDING HINGE, AND
HANDLEBARS SECURELY LOCKED IN PLACE.
WARNING
2
PLEASE READ THE OPERATION MANUAL
THOROUGHLY.
Failure to follow the basic instructions and safety precautions
listed in the operation manual can lead to damage to your Alpha
2.0, property damage, serious bodily injury, and even death.
Thank you for purchasing the Hover-1 Alpha 2.0. Please read all
instructions carefully before using it and retain this manual for future
reference.
• To avoid collisions, falls, and loss of control, please learn how to ride
the Alpha 2.0 safely.
• You can learn how to ride the Alpha 2.0 by reading the operation
manual and watching videos.
• All users are responsible for any consequences caused by violating
warning contents or proper operations. Hover-1 can not be held liable.
ATTENTION
1. Use only the supplied charger from Hover-1 with this E-Scooter.
2. The operating temperature range of the charger is 32°F - 104°F
(0°C - 40°C).
3. The operating temperature range of the Alpha 2.0 is 32°F - 104°F
(0°C - 40°C).
4. Do not ride on icy or slippery surfaces.
5. Read the operation manual and warning labels before riding.
6. Store the Alpha 2.0 in a dry, ventilated environment.
7. When transporting the Alpha 2.0, avoid violent crashes or impact.
WARNING
3
PLEASE READ THE OPERATION MANUAL
THOROUGHLY.
Failure to follow the basic instructions and safety precautions
listed in the operation manual can lead to damage to your Alpha
2.0, property damage, serious bodily injury, and even death.
Thank you for purchasing the Hover-1 Alpha 2.0. Please read all
instructions carefully before using it and retain this manual for future
reference.
• To avoid collisions, falls, and loss of control, please learn how to ride
the Alpha 2.0 safely.
• You can learn how to ride the Alpha 2.0 by reading the operation
manual and watching videos.
• All users are responsible for any consequences caused by violating
warning contents or proper operations. Hover-1 can not be held liable.
ATTENTION
1. Use only the supplied charger from Hover-1 with this E-Scooter.
2. The operating temperature range of the charger is 32°F - 104°F
(0°C - 40°C).
3. The operating temperature range of the Alpha 2.0 is 32°F - 104°F
(0°C - 40°C).
4. Do not ride on icy or slippery surfaces.
5. Read the operation manual and warning labels before riding.
6. Store the Alpha 2.0 in a dry, ventilated environment.
7. When transporting the Alpha 2.0, avoid violent crashes or impact.
LOW TEMPERATURE WARNING
Low temperatures will aect the lubrication of moving parts inside the
Alpha 2.0, increasing internal resistance. Additonally, the discharge
capacity and capacity of the battery will be significantly decreased.
Use caution when riding the Alpha 2.0 in cold temperatures (below
40°F/4°C). Doing so may increase the risk of mechanical failures of the
E-Scooter, which may lead to damage to your device, property damage,
serious bodily injury, and even death.
SAFETY INSTRUCTIONS
• Keep the E-Scooter away from heat sources, direct sunlight, humidity,
water, and any other liquids.
• Do not operate the E-Scooter if it has been exposed to water, moisture,
or any other liquids to prevent electric shock, explosion, and/or injury to
yourself and damage to the E-Scooter.
• Do not use the E-Scooter if it has been dropped or damaged in any
way.
• Repairs to electrical equipment should only be performed by the
manufacturer. Improper repairs void the warranty and may place the
user at serious risk.
• Do not puncture or harm the exterior surface of the E-Scooter in any
way.
• Keep the device free from dust, lint, etc.
• Do not use this E-Scooter for anything other than its intended use or
purpose. Doing so may damage the E-Scooter or lead to property
damage, injury, or death.
• This product is not a toy. Keep out of reach of children.
• Do not expose the batteries to excessive heat such as direct sunlight or
an open flame.
• Do not allow hands, feet, hair, body parts, clothing, or similar articles to
come in contact with moving parts, wheels, or the drivetrain while the
Alpha 2.0 is running.
4
• Do not operate or allow others to operate the Alpha 2.0 until the user
understands all instructions, warnings, and safety features described in this
manual.
• Check with your doctor if you have a medical condition that could aect
your ability to use the Alpha 2.0.
• Persons with head, back, neck ailments, or prior surgeries
to those areas of the body are not recommended to use
the Alpha 2.0.
• Do not operate if you are pregnant or have a heart condition.
• Persons with any mental or physical conditions that may make them
susceptible to injury or impair their physical or mental capabilities to
recognize, understand, and perform all of the safety instructions and
assume the hazards inherent in operation should not use the Alpha 2.0.
Please keep your serial number on file for warranty claims as well as proof
of purchase.
Prolonged exposure to UV rays, rain, and the elements may damage the
enclosure materials. Store indoors when not in use.
WARNING
SERIAL NUMBER
5
The Alpha 2.0 is a personal transporter. Our production processes are
developed with strict testing for each Alpha 2.0 E-Scooter. Operating the
Alpha 2.0 without following the contents of this manual may lead to
damage to your Alpha 2.0 E-Scooter or bodily injury.
PACKAGE CONTENTS
• Hover-1 Alpha 2.0 Electric Folding Scooter
• Charger & Charging Cable
• Hex Key & Bolts
• Air Pump
Your Alpha 2.0’s serial number is stamped on the bottom of the
E-Scooter platform. Record the serial number in the designated area of
the “WARRANTY” section of this manual in case your Alpha 2.0 is lost or
stolen.
• The first rule of safe riding is to use common sense.
• Dierent localities and countries have dierent laws about riding electric
transportation devices on public roads. You should check with local oicials
to ensure you are complying with local traic law requirements.
• Hover-1 is not liable for tickets or violations given to riders who do not
follow local laws and regulations.
• For your safety, always wear a helmet that meets CPSC or CE safety
standards. In the event of an accident, a helmet can protect you from
serious injury and in some cases, even death.
INTRODUCTION
SAFETY PRECAUTIONS
• Do not operate or allow others to operate the Alpha 2.0 until the user
understands all instructions, warnings, and safety features described in this
manual.
• Check with your doctor if you have a medical condition that could aect
your ability to use the Alpha 2.0.
• Persons with head, back, neck ailments, or prior surgeries
to those areas of the body are not recommended to use
the Alpha 2.0.
• Do not operate if you are pregnant or have a heart condition.
• Persons with any mental or physical conditions that may make them
susceptible to injury or impair their physical or mental capabilities to
recognize, understand, and perform all of the safety instructions and
assume the hazards inherent in operation should not use the Alpha 2.0.
Please keep your serial number on file for warranty claims as well as proof
of purchase.
Prolonged exposure to UV rays, rain, and the elements may damage the
enclosure materials. Store indoors when not in use.
6
• Obey all local traic laws. Obey red and green lights, one-way streets, stop
signs, pedestrian crosswalks, etc.
• Ride with traic, not against it.
• Ride defensively; expect the unexpected.
• Give pedestrians the right-of-way.
• Do not ride too close to pedestrians and alert them if you intend to pass
them from behind.
• Slow down at all street intersections and look to the left and right before
crossing.
• Your Alpha 2.0 electric scooter is not equipped with reflectors.
It is not recommended that you ride in conditions of low visibility.
• If you are riding your E-Scooter in low-visibility conditions, ensure your LED
headlight is turned on, and that you are wearing bright, reflective clothing.
• Do not ride above your skill level. Ensure you have had enough practice
with all functions and features of your Alpha 2.0.
• Do not ride too fast – with increased speed comes increased risk. If you
are moving at a higher speed, small bumps can create strong impacts,
leading to a higher risk of injury.
• Do not ride with pets.
• Before stepping on your Alpha 2.0, make sure it is placed flat on level
ground.
WARNING
When you ride in low-visibility conditions
such as fog, dusk, or night, you might be
diicult to see, which could lead to a
collision. To increase your level of safety, be
sure to wear bright, reflective clothing when
riding in low-visibility conditions.
7
• Do not try to open or modify your Alpha 2.0 E-Scooter. Doing so voids the
manufacturer warranty and may cause your Alpha 2.0 to fail, resulting in
injury or death.
• Do not use the Alpha 2.0 in a manner that would put people or property in
danger.
• If you are riding near other riders, be sure to maintain a safe distance
between each other to prevent collisions.
• Be sure to keep your feet on the Alpha 2.0 at all times. Moving your feet o
your Alpha 2.0 while driving is dangerous and may cause the Alpha 2.0 to
stop suddenly or veer sideways.
• Do not operate the Alpha 2.0 while under the influence of drugs or
alcohol.
• Do not operate the Alpha 2.0 when you are restless or sleepy.
• Use your best judgment to keep yourself out of dangerous situations with
your Alpha 2.0.
• Do not ride your Alpha 2.0 o of curbs, ramps, or attempt to operate in a
skate park, empty pool, or in any way similar to a skateboard. Misuse of your
Alpha 2.0 voids the manufacturer warranty and may lead to injury or
damage.
• Do not abuse your Alpha 2.0. Doing so can damage your unit and cause
failure to the operating system, which may lead to injury. Physical abuse,
including dropping your Alpha 2.0, voids the manufacturer warranty.
• Do not operate in or near puddles of water, mud, sand, stones, gravel,
debris, or near rough and rugged terrain.
• The Alpha 2.0 can be used on paved surfaces that are flat and even. If you
encounter uneven pavement, lift your Alpha 2.0 over and past the
obstruction.
• Do not ride in inclement weather: snow, rain, hail, sleet, on icy roads, or in
extreme heat or cold.
• Bend your knees when riding on bumpy pavement to absorb the shock
and vibrations. This will help you keep your balance.
• If you are unsure if you can safely ride on a specific terrain, step o and
carry your Alpha 2.0. Always be on the side of caution.
8
• Do not attempt to ride over bumps or objects greater than ½ inch, even
when prepared and bending your knees.
• Pay attention. Look where you are riding and be conscious of the road
conditions, people, property, and objects around you.
• Do not operate the Alpha 2.0 in crowded areas.
• Operate your Alpha 2.0 with extreme caution when indoors, especially
around people, property, and narrow spaces.
• Do not operate the Alpha 2.0 while talking, texting, or looking at your
phone.
• Do not ride your Alpha 2.0 where it is not permitted.
• Do not ride your Alpha 2.0 near motor vehicles or on public roads.
• Do not travel up or down steep hills.
• The Alpha 2.0 is intended for use by a single individual, DO NOT attempt
to operate the Alpha 2.0 with two or more people.
• Do not carry anything while riding the Alpha 2.0.
• Individuals with lack of balance should not attempt to operate the Alpha
2.0.
• Young children and the elderly should not operate the Alpha 2.0.
• At higher speeds, always take longer stopping distances into
consideration.
• Do not attempt to jump on or o your Alpha 2.0.
• Do not attempt any stunts or tricks with your Alpha 2.0.
• Do not ride the Alpha 2.0 in dark or poorly lit areas.
WARNING
Proper use of your brake is vital to ensure safe, eicient
stopping. To avoid misuse and potential injury, do not apply
sudden or excessive force to your brakes. Apply your brakes
gradually and give yourself enough room to come to a
complete stop safely.
9
• Do not ride the Alpha 2.0 near or over potholes, cracks, or uneven
pavement or surfaces.
• Do not operate your Alpha 2.0 o-road.
• Do not turn sharply, especially at high speeds.
• Do not exceed the maximum weight limit of 264 lbs (120 kg).
• Avoid driving the Alpha 2.0 in unsafe places, including areas with
flammable gas, steam, liquid, dust, or fiber that could cause fire and
explosion accidents.
• Do not operate near swimming pools or other bodies of water.
• Maintain a safe braking distance during wet conditions.
WARNING
There may be additional risk of injury if you use your
E-Scooter incorrectly. This includes, but is not limited to:
• Jumping your E-Scooter
• Riding over debris or obstacles
• Performing stunts
• Riding o-road
• Riding fast
• Racing other riders
• Riding in an unusual manner
The aforementioned examples add stress to each part of
your E-Scooter and can lead to long term damage of the
device. Damage to your E-Scooter can lead to an accident
or increase your risk of injury. To decrease your risk of injury,
use your E-Scooter correctly.
10
• To avoid damage to the Alpha 2.0’s internal circuitry, do not expose it to
liquid, moisture, or humidity.
• Do not use abrasive cleaning solvents to clean the Alpha 2.0.
• Do not expose the Alpha 2.0 to extremely high or low temperatures, as
this will shorten the life of the device, destroy the battery, and/or distort
certain plastic parts.
• Do not dispose of the Alpha 2.0 in fire as it may explode or combust.
• Do not let the Alpha 2.0 come into contact with sharp objects, as this will
cause scratches and damage.
• Do not let the Alpha 2.0 fall from high places, as doing so may damage the
internal circuitry.
• Do not attempt to disassemble the Alpha 2.0.
• Use only the charger provided by Hover-1.
• Use only the manufacturer’s authorized replacement parts.
CARE & MAINTENANCE
WARNING
To reduce the risk of injury, adult supervision is
required. Never use in roadways, near motor vehicles,
on or near steep inclines or steps, swimming pools, or
other bodies of water. Always wear shoes, and never allow
more than one rider at a time.
WARNING
Avoid using water or other liquids for cleaning. If water or
other liquids enter the Alpha 2.0, it will cause permanent
damage to the internal components.
WARNING
Users who disassemble the Alpha 2.0 without permission
from Hover-1 will void the warranty.
11
BATTERY SPECIFICATIONS
Battery Type: Rechargeable lithium-ion battery
Charge Time: Up to 5 hours
Battery Voltage: 36V
Battery Capacity: 6Ah
Working Temperature: 32°F - 104°F (0°C - 40°C)
Charging Temperature: 32°F - 104°F (0°C - 40°C)
Storage Time: 1 year
Storage Temperature: 32°F - 104°F (0°C - 40°C)
Storage Humidity: 5% - 95%
BATTERY MAINTENANCE
• The lithium-ion battery is built into the E-Scooter. Do not disassemble
the E-Scooter to remove the battery or attempt to separate it from the
E-Scooter.
• When charging the E-Scooter, only use the enclosed 1-pin charging cable
provided by Hover-1. Use of any other charger or cable may lead to
damage to the E-Scooter, overheating, and risk of fire. Use of any other
charger or cable voids the manufacturer warranty.
• Do not connect or attach the E-Scooter or the battery to a power supply
plug or directly to a car’s cigarette lighter.
• Do not place the E-Scooter near a fire or leave it out in direct sunlight. Heating
the E-Scooter can break or ignite the battery inside the device.
• Do not continue charging the battery if it does not recharge within the
specified charging time. Doing so may cause the battery to become hot,
rupture, or ignite.
• To preserve natural resources, please recycle or dispose of batteries
properly. This product contains lithium-ion batteries. Local, state, or federal
laws may prohibit disposal of lithium-ion batteries in ordinary trash. Consult
your local waste authority for information regarding available recycling
and/or disposal options.
BATTERY CARE / MAINTENANCE
WARNING
Failure to follow the safety precautions
listed below could lead to serious bodily
injury or death.
12
• Do not attempt to modify, change, or replace your battery.
• Do not use your device if the battery begins to emit odor, overheats, or
begins to leak.
• Do not touch any leaking materials or breathe fumes emitted.
• Do not allow children or animals to touch the battery.
• The battery contains dangerous substances. Do not open the battery or
insert anything into the battery.
• Do not attempt to charge the device if the battery has discharge or emits
any substances. In that case, immediately distance yourself from the
battery in case of fire or explosion.
WARNING
SEEK IMMEDIATE MEDICAL ASSISTANCE IF
YOU ARE EXPOSED TO ANY SUBSTANCE
THAT IS EMITTED FROM THE BATTERY.
13
H1-ALP2
34.4 lbs (15.6 kg)
264 lbs (120 kg)
44 lbs (20 kg)
Up to 18 mph (28.9 km/h)
Up to 12 miles (19.3 km)
Lithium-ion
450W brushless motor
36V
6Ah (30 cell)
100V-240V, 50 Hz/60 Hz
44.7 in. x 16.7 in. x 16.9 in.
(113.5 cm x 42.5 cm x 42.8 cm)
44.7 in. x 16.7 in. x 45.4 in.
(113.5 cm x 42.5 cm x 115.2 cm)
Inflated rubber tires
10” front & rear
340 kPa
Hand-activated rear disc brake
D044966
2AANZALPHA21M
UL2272 certified
Model:
Net Weight:
Max Supported Weight:
Min Supported Weight:
Max Speed:
Max Range:
Battery Type:
Motor Power:
Battery Voltage:
Battery Capacity:
Power Requirement:
Folding Size:
Open Size:
Tire Type:
Tire Size:
Tire Inflation Pressure:
Brake Type:
BT ID:
FCC ID:
UL Certification:
SPECIFICATIONS
PARTS LIST
B
C
E
D
F
A
A. Alpha 2.0 E-Scooter
B. Handlebar Assembly
C. Charger + Charging Cable
D. Hex Key & Bolts
E. Air Pump
F. 6 Spare Bolts
14
HOVER-1 ALPHA 2.0 DIAGRAM
FEATURES/PARTS
1. LCD Display
2. Bell
3. Brake Handle
4. Handlebar (L)
5. Handlebar (R)
6. Throttle
7. Power Button
8. Folding Clip
9. Steering Column
10. Folding Hinge
11. Kickstand
12. Foot Deck
13. Charging Port
14. Folding Hook
15. Brake Light
16. Rear Disc Brake
1
3
10
11
13
16
7
9
14
15
5
12
6
2
8
4
15
HOVER-1 ALPHA 2.0 DIAGRAM
LCD DISPLAY
Mph
POWER BUTTON
LCD DISPLAY
BRAKE HANDLE
FOLDING
CLIP
THROTTLE
SPEEDOMETER
Displays your current speed in Mph.
Displays the current speed mode when
toggled. While powered on, quick-press
the power button twice to switch
between high and low speed mode:
1 - Low speed mode (max speed 9 mph)
2 - High speed mode (max speed 18 mph)
HIGH SPEED MODE
Indicates high speed mode
is activated.
BATTERY INDICATOR
Displays your current battery level.
CRUISE CONTROL ICON
Indicates cruise control is activated.
While riding at a constant speed above
3 mph, quickly press the throttle down
two times. You will hear a beep and the
cruise control indicator will light up on
the LCD display, indicating that it is
activated. Press the throttle down once
or squeeze the brake handle to cancel
cruise control.
HEADLIGHT ICON
Indicates the headlight is activated.
Press the power button once to turn
the headlight on or off.
16
The Alpha 2.0 has a powerful built-in wireless speaker, so you can play your
music while riding.
PAIRING THE SPEAKER
1) Turn on your E-Scooter. The speaker will “ping” to announce that it’s
waiting for a Bluetooth
®
connection. This will indicate your E-Scooter’s
speaker is now in pairing mode.
2) Place the E-Scooter and the Bluetooth
®
device you would like to pair
within the operating distance. We recommend keeping the two devices no
further than 3 feet (1 meter) apart during pairing.
3) Ensure Bluetooth
®
is enabled on your phone or music device. Refer to
the manufacturer’s instructions for how to enable Bluetooth
®
on your
device.
4) Once you have activated Bluetooth
®
on your device, select the option
“H1-Alpha 2.0” from the list of available Bluetooth
®
devices.
5) If prompted, enter the PIN code “000000” and confirm the entry.
6) The speaker will say “paired” when successfully paired.
7) Please note, pairing mode on the E-Scooter will last for two minutes. If no
devices are paired after two minutes, the E-Scooter speaker will
automatically return to standby mode.
8) If pairing is unsuccessful, turn o the E-Scooter first and try again
following the previous steps.
9) If your smartphone is out of range, or the battery is low on your
E-Scooter, the speaker may disconnect from your device, and the speaker
will say “disconnected.” To reconnect, follow the previous steps, or
recharge your E-Scooter.
NOTE: Once you have paired the E-Scooter speaker with a device, the
speaker will remember the device and will pair automatically when the
device’s Bluetooth
®
is activated within range. You do not need to re-pair any
previously connected devices.
Your E-Scooter can pair with up to two multi-point devices at a time. You
can reconnect a previously paired device without going through the
pairing process for up to two devices.
LISTENING TO MUSIC
Once the Bluetooth
®
speaker is paired to your device, you can stream
music wirelessly through it. Select the track you wish to listen to on your
device. All volume and track controls will be made using your music
device. Should you encounter any problems while streaming, please refer
to your device’s user manual.
BLUETOOTH
®
SPEAKER
Displays the current speed mode when
toggled. While powered on, quick-press
the power button twice to switch
between high and low speed mode:
1 - Low speed mode (max speed 9 mph)
2 - High speed mode (max speed 18 mph)
17
• Ensure that the charging port is clean and dry.
• Make sure that there is no dust, debris, or dirt inside the port.
• Plug the charger into a grounded wall outlet.
• Connect the cable with the power supply (100V-240V; 50 Hz/60 Hz).
• Align and connect the 1-pin charging cable into the charging port of the
Alpha 2.0 (DO NOT FORCE OR BEND THE CHARGING CABLE AS IT MAY
CAUSE THE PRONGS TO BEND OR BREAK).
• The charging indicator light on the charger itself should change to red,
indicating that your E-Scooter is now being charged.
• When the red indicator light on your charger changes to green, your
E-Scooter is fully charged.
• After fully charging your E-Scooter, unplug the charger from your device
and from the wall outlet.
• If the E-Scooter is not used for an extended period of time, you may need to
recharge the battery every 2 months to maintain the battery life.
Only use the included charging
cable and charger to charge your
Alpha 2.0. Using any other charger
may damage your Alpha 2.0.
CAUTION
CHARGING YOUR ALPHA 2.0
PREPARING YOUR E-SCOOTER
PLEASE READ THE FOLLOWING INSTRUCTIONS CAREFULLY
ATTACHING THE HANDLEBAR ASSEMBLY
Attach the handlebar assembly by placing it into the steering column,
aligning the front and back bolt holes, and tightening the 4 bolts into place
with the hex key.
x4
18
Some parts of your Alpha 2.0 can injure you if mishandled. Moving and
folding parts can cut skin. Clamps and pivoting parts such as brake levers
can pinch. When folding and unfolding your Alpha 2.0, please watch for
pinch points where injury may be sustained. Do not leave your hand in
these areas during the folding or unfolding process.
• Ensure that the charging port is clean and dry.
• Make sure that there is no dust, debris, or dirt inside the port.
• Plug the charger into a grounded wall outlet.
• Connect the cable with the power supply (100V-240V; 50 Hz/60 Hz).
• Align and connect the 1-pin charging cable into the charging port of the
Alpha 2.0 (DO NOT FORCE OR BEND THE CHARGING CABLE AS IT MAY
CAUSE THE PRONGS TO BEND OR BREAK).
• The charging indicator light on the charger itself should change to red,
indicating that your E-Scooter is now being charged.
• When the red indicator light on your charger changes to green, your
E-Scooter is fully charged.
• After fully charging your E-Scooter, unplug the charger from your device
and from the wall outlet.
• If the E-Scooter is not used for an extended period of time, you may need to
recharge the battery every 2 months to maintain the battery life.
PINCH POINTS
A
19
To fold your Alpha 2.0 , use your thumb to push the twist lock
counter-clockwise until it is no longer in front of the folding hinge. Grab
the folding hinge with one hand and hold the steering column with
the other. Pull the folding hinge down and push the steering column
down to the foot deck.
To unfold your Alpha 2.0, raise the steering column until it is standing
up. Pull the folding hinge up and press it against the steering column.
Use your thumb to push the twist lock until it is positioned in front of the
folding hinge.
To change speed modes, quick-press the power button twice while the
Alpha 2.0 is powered on and not in motion. The following are the top speeds
for each speed mode:
1 - Low speed mode (max speed 9 mph)
2 - High speed mode (max speed 18 mph)
To activate cruise control, quickly press the throttle down two times
while you are riding at a constant speed above 3 mph. You will hear
a beep and the cruise control indicator will light up on the LCD
display, indicating that it is activated. Press the throttle down once or
squeeze the brake handle to cancel cruise control.
For safety reasons, the Alpha 2.0 will not accelerate unless it is already
moving at least 3 mph (4.8 km/h). You must push o the ground with your
foot to get the Alpha 2.0 moving, then press the throttle to ride it.
KICK TO START
FOLDING & UNFOLDING
SPEED MODES
CRUISE CONTROL
20
Before each use, the E-Scooter operator shall perform the
pre-operation checks as specified below:
• The area that the unit is to be operated in is safe and suitable for safe
operation.
• The braking system is functioning properly.
• All safety lables are in place and understood by the operator.
• Any and all axle guards, chain guards, or other covers and guards
supplied by the manufacturer are in place and in serviceable condition.
• The tires are in good condition, inflated properly, and have suicient tread
remaining.
It is important that you fully understand all the functions of your Alpha 2.0
E-Scooter. If these functions are not used correctly, you will not have full
control of your Alpha 2.0.
Practice using the functions of your Alpha 2.0 at slower speeds in a flat,
open area before taking it out into public areas.
PRE-RIDE CHECKLIST
Ensure that your Alpha 2.0 is in proper working order each time you ride. If
a part of the Alpha 2.0 does not function correctly, please contact our
Customer Support Center.
• Ensure the battery is fully charged before riding your E-Scooter.
• Please wear all appropriate safety and protective gear before operating
your E-Scooter.
• Make sure to wear comfortable clothes and flat, closed-toe shoes when
operating your E-Scooter.
BEFORE RIDING
WARNING
Any E-Scooter that does not work properly
can cause you to lose control and fall. Do
not ride an E-Scooter with a part that is
damaged. Replace the damaged part
before riding.
21
FAILURE TO FOLLOW ANY OF THE FOLLOWING SAFETY
PRECAUTIONS MAY LEAD TO DAMAGE TO YOUR DEVICE, DAMAGE
TO PROPERTY, VOID YOUR MANUFACTURER WARRANTY, AND MAY
CAUSE SERIOUS BODILY INJURY OR DEATH.
OPERATING YOUR DEVICE
Make sure the device is fully charged before the first use. Before turning on
your Alpha 2.0 E-Scooter, ride it like a normal kick scooter to get
comfortable with the device before using it with the motor.
When you are comfortable riding the E-Scooter, power it on. For the motor
to activate, you must first push o the ground with your foot to get the
E-Scooter moving, then press the throttle down with your thumb.
To slow down, disengage the throttle and squeeze the brake handle to
engage the disc brake. The brake is pressure-sensitive, so a tighter squeeze
will result in more stopping power. Do not attempt to stop suddenly as this
may lead to injury or damage to your brake discs.
Use the handlebars to turn the Alpha 2.0 in the desired direction.
The Alpha 2.0 can be operated manually if you do not wish
to use the motor.
As you get comfortable on the E-Scooter, you will notice it becomes easier
to maneuver. Remember at higher speeds, it is necessary to shift your
weight when making turns to maintain your stability.
Prepare to brace yourself if you encounter bumps or uneven surfaces. If
necessary, dismount your Alpha 2.0 and carry it to a safe operating surface.
RIDING YOUR ALPHA 2.0 E-SCOOTER
WARNING
Do not turn sharply or at high speeds. Do not
turn or ride quickly along slopes, as it may
cause injury.
22
SPEED AND WEIGHT LIMITATIONS
Speed and weight limits are set for your own safety. Please abide by the
limits listed here in the manual.
• Maximum Speed: 18 mph
• Maximum Supported Weight: 264 lbs
• Minimum Supported Weight: 44 lbs
OPERATING RANGE
The Alpha 2.0 can travel up to 12 miles on a fully charged battery under
ideal riding conditions. The following are some of the major factors that will
aect the operating range of your device:
• Terrain: Operating range is highest when riding on a smooth, flat surface.
Riding uphill and/or on rough terrain will reduce the operating range
significantly.
• Weight: A lighter user will have a higher operating range than a heavier
user.
• Ambient Temperature: Please ride and store the E-Scooter in
recommended temperatures. This will increase operating range, battery
life, and overall performance of your device.
• Speed and Riding Style: Maintaining a moderate and consistent speed
while riding produces maximum operating range. Traveling at high speeds
for extended periods of time, frequent starts and stops, and idling will
decrease operating range.
WARNING
Riding the Alpha 2.0 while exceeding the
weight limit may increase the possibility of
injury or product damage.
WARNING
Proper use of your brake is vital to ensure
safe, eicient stopping. To avoid misuse
and potential injury, do not apply sudden
or excessive force to your brake. Apply the
brake gradually and give yourself enough
room to come to a complete stop safely.
23
If a system error occurs or an improper operation is performed while
riding your Alpha 2.0, the device will alert the user in a variety of ways.
The following are common occurrences that will produce safety alerts.
These notices should not be ignored and appropriate action should be
taken to correct any improper operation, failure, or errors.
• Prohibited riding surfaces (uneven, too steep, unsafe, etc.)
• Battery voltage is too low.
• The E-Scooter is still charging.
• The E-Scooter is overheating, or the motor temperature is too high.
• When the battery is about to run out of power, the battery icon will
flash.
• If any or both tires are blocked, the device will stop after 10 seconds.
• When the battery level has depleted below protection mode, the motor
will power o after 15 seconds.
• If a high discharge current is produced during use (such as riding up a
steep slope for a long period of time), the motor will shut o after 15
seconds.
SAFETY ALERTS
24
FCC STATEMENT
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment o and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
25
WARRANTY
For warranty information, please visit us at www.hover-1.com
Error codes
Error E1- motor hall failure, the motor needs to be
replaced
Error E2 - accelerator failure, the accelerator needs to
be replaced
Error code E3 - motor blocking fault, release the
accelerator
Error E4/MOS - mainboard MOS tube failure, the
mainboard needs to be replaced
Error E6 - controller / instrument communication failure,
the controller needs to be replaced
Error E7 - battery over-voltage protection, the battery
needs to be replaced
Error E9 - brake failure, the brake needs to be replaced
Error E8 - controller error, the controller needs to be
replaced
Aix Serial Number Label Here:
Manufacturer: DGL Group, Ltd.
2045 Lincoln Highway, Edison, NJ 08817
TEL: 732-692-5000
26
@RideHover1
@RideHover1
@Hover1Rideables
www.Hover-1.com
