DMX1058XR
DMX1038S
DAX1050XR
DAX800XR
DAX8000S
MONITOR WITH RECEIVER
INSTRUCTION MANUAL
• Updated information (the latest Instruction Manual, system updates, new
functions, etc.) is available from
<https://www.kenwood.com/cs/ce/>.
• The Instruction manual is subject to change for modification of
specifications and so forth. Be sure to download the latest edition of the
Instruction manual for reference.
<https://www.kenwood.com/cs/ce/im_edition/im409/>
Take the time to read through this instruction manual.
Familiarity with installation and operation procedures will help you obtain the best performance from your new
receiver.
For your records
Record the serial number, found on the top of the unit, in the spaces designated on the warranty card, and in the space
provided below. Refer to the model and serial numbers whenever you call upon your KENWOOD dealer for information or
service on the product.
Model DMX1058XR / DMX1038S / DAX1050XR / DAX800XR / DAX8000S Serial number
US Residence Only
Register Online
Register your KENWOOD product at www.kenwood.com/usa/
© 2025 JVCKENWOOD Corporation B5K-1190_ref_K_En_00 (K)
2
SOFTWARE LICENSE AGREEMENT
Important Notice on Software
I Software License on This Product
The software embedded in this product
comprises a number of independent software
components, each of which is copyrighted by
JVCKENWOOD Corporation or by a third party.
This product uses software components that
are based on an End-User License Agreement
(hereinafter called “EULA”) stipulated by
JVCKENWOOD Corporation and by third parties.
The EULA dictates the availability of the source
codes of free-software components as a
prerequisite to distributing them in executable
form under the terms of the GNU General Public
License or the Lesser General Public License
(hereinafter called “GPL/LGPL”). To get
information about the software components
that are subject to the terms of the GPL/LGPL,
please visit the following Website:
Website URL https://www2.jvckenwood.com/
gpl/
Queries concerning the contents of the source
code or the like will not be accepted.
Please note that software components based
on a EULA that is not subject to the terms of the
GPL/LGPL or those that have been developed or
created by JVCKENWOOD Corporation will be
excluded from the scope of source code
disclosure.
Because licenses to use software components
distributed under the GPL/LGPL are offered to
the customers for free of charge, no warranty is
granted to the customers, whether explicitly or
implicitly, to the extent of the applicable laws.
Unless otherwise stipulated by the applicable
laws or agreed upon in writing, the copyright
holders or those who are entitled to modify and
redistribute the software components are not
held responsible for any and all damages
resulting from their use or from inability to use
them. For more information about the terms of
use of the software components, required items
of compliance and so on, please refer to the
GPL/LGPL.
Customers wishing themselves to use a
software component that is subject to the GPL/
LGPL embedded in this product are encouraged
to read the terms of the corresponding license
before use. Because each individual license is
prescribed by a third party other than
JVCKENWOOD Corporation, the original
(English) of the license is presented.
SOFTWARE LICENSE AGREEMENT
3
English
EULA
I Software License Agreement
JVCKENWOOD Corporation (hereinafter called
“Licensor”) holds either the copyright to the
embedded software or the right to sublicense it.
This agreement establishes the conditions
under which the customer uses this “Licensed
Software.”
The customer shall agree to the terms of this
license agreement before proceeding to use
Licensed Software.
This agreement is deemed to have taken effect
when the customer (hereinafter called “User”)
has used a product implementation of Licensed
Software.
The Licensed Software may contain software
Licensor has been licensed to use by third
parties directly or indirectly. Some third parties
may have terms of use prescribed for their
customers, apart from this Software License
Agreement. This agreement does not apply to
such software. Be sure to consult “Important
Notice on Software” as presented separately.
Article 1 (General)
Licensor grants to User a non-exclusive, non-
assignable right of use Licensed Software within
the country where the User purchases the
Product (hereinafter the "Country") (except for
the exception provided for in Paragraph 1,
Article 3).
Article 2 (Right of Use)
1. The rise of use granted under this
agreement is the right to use Licensed
Software in this product.
2. User may not duplicate, copy, modify, add
to, translate or otherwise alter, or loan
licensed Software and the associated
literature in whole or in part.
3. Use of Licensed Software is limited to a
private extent , and Licensed Software may
not be distributed, licensed or sublicensed
for any purposes whatsoever, including
commercial use.
4. User shall use Licensed Software as per the
instruction manual or instructions given in
the help file and may not use or duplicate
data in violations of the regulations of the
Copyright Law or other governing laws by
using Licensed Software in whole or in part.
Article 3 (Terms of License)
1. In assigning this product, User may not
retain the original copy of the embedded
Licensed Software (including associated
literature, updates and upgrades) and any
duplicates and associated literature with
regard to the license to use Licensed
Software. User may transfer Licensed
Software only to the condition of binding
the assignee to abide by the terms of this
Software License Agreement.
2. User may not reverse-engineer, disassemble,
decompile or otherwise analyze the source
code of Licensed Software.
Article 4 (Rights to Licensed Software)
All rights to Licensed Software and the
associated literature, including copyrights, shall
reside with Licensor or
the original right holder who has granted the
Right of Use and right to sublicense to Licensor
(hereinafter referred to as “Original Right
Holder”), and User does not have any rights
other than Right of Use granted hereunder with
regard to Licensed Software and the associated
literature.
Article 5 (Exemption Granted to Licensor)
1. Licensor and Original Right Holder do not
assume any responsibility for damages
caused to User or third parties resulting from
the exercise by User of the license granted
hereunder, unless otherwise provided by
any law to the contrary.
2. Licensor does not warrant Licensed
Software to be merchantable, compatible
and fit for specific purposes.
Article 6 (Responsibility for Third Parties)
If disputes over the infringement of third
parties’ intellectual property rights, such as
copyrights and patent rights, arise out of the
use of Licensed Software by User, User shall
resolve these disputes at User’s own expenses
while keep Licensor and Original Right Holder
harmless.
SOFTWARE LICENSE AGREEMENT
4
Article 7 (Secrecy Obligation)
User shall keep confidential Licensed Software
provided hereunder, information contained in
the associated literature or the like and those
provisions of this agreement not yet in public
knowledge and may not disclose or leak these
to third parties without prior written consent
from Licensor.
Article 8 (Cancellation of the Agreement)
Licensor reserves the right to cancel this
agreement forthwith and claim compensation
from User for the damages caused by such
cancellation when User:
(1) Breaches any of the provisions of this
agreement, or
(2) Has received a petition for seizure,
provisional seizure, provisional disposition or
any other kind of compulsory execution.
Article 9 (Destruction of Licensed Software)
If this agreement is terminated under the
provision of the foregoing paragraph, User shall
destroy Licensed Software, along with all
associated literature and its duplicates, within
two (2) weeks from the date of termination.
Article 10 (Copyright Protection)
1. Copyrights and all other intellectual
property rights relating to Licensed Software
shall reside with Licensor and Original Right
Holder and in no circumstances with User.
2. User shall abide by the laws relating to
copyrights and intellectual property rights in
using Licensed Software.
Article 11 (Export Control)
1. Licensed Software and the associated
literature or the like may not be exported to
places outside the Country (including
transmission outside the Country over the
Internet or the like).
2. User agrees that Licensed Software is
subject to export controls imposed by the
Country and the United States of America.
3. User agrees to comply with all the
international and domestic laws that apply
to this software (U.S. Export Administration
Regulations and regulations established by
the U.S., the Country and their
governmental agencies regarding usage by
end users and export destinations).
Article 12 (Miscellaneous)
1. Even if this agreement is invalidated in part
by law, all other provisions shall remain in
effect.
2. Licensor and User shall consult each other in
good faith to resolve any matters not
provided for in this agreement or questions
arising from the interpretation of this
agreement.
3. Licensor and User agree that this agreement
is governed by the law of Japan and that all
disputes involving claims and obligations
that may arise out of this agreement will be
settled by arbitration at the Tokyo District
Court as the court of first instance.
SOFTWARE LICENSE AGREEMENT
5
English
Contents
Before Use 7
Precautions................................................................. 7
How to read this manual ....................................... 8
Basic Operations 9
Functions of the Buttons on the Front Panel. 9
Touch screen operations....................................... 11
Turning on the Unit................................................. 11
Adjusting the volume............................................. 12
Turn off the screen................................................... 13
Put the unit in standby........................................... 13
Initial Settings............................................................ 14
Display the HOME screen...................................... 16
Popup menu .............................................................. 16
Source selection screen description.................. 18
Source control screen descriptions ................... 19
List screen ................................................................... 20
About radio notifications ...................................... 21
Widget 23
Widget.......................................................................... 23
Drive Widget Panel.................................................. 24
Importing Image Files............................................. 25
APPS 26
Wireless Mirroring Operation .............................. 26
Apple CarPlay Operation....................................... 27
Android Auto™ Operation..................................... 29
USB 33
Connecting a USB device ...................................... 33
USB Basic Operation................................................ 34
Search Operation ..................................................... 35
iPhone 37
Preparation................................................................. 37
iPhone Basic Operation.......................................... 38
Search Operation ..................................................... 39
HD Radio™ Tuner 41
HD Radio Tuner Basic Operation......................... 41
Receive Mode............................................................. 43
Memory Operation................................................... 43
Selecting Operation ................................................. 44
Bookmark..................................................................... 45
SiriusXM
®
with 360L 47
About SiriusXM
®
......................................................... 47
Initial settings ............................................................. 47
SiriusXM
®
Basic Operation...................................... 49
Storing Channels in Preset Memory................... 52
Selecting Operation ................................................. 53
For You.......................................................................... 54
Categories.................................................................... 55
My Collection.............................................................. 56
SiriusXM Search ......................................................... 57
Related Content......................................................... 58
Set Artist & Song Notification............................... 59
Set Team Notification.............................................. 60
Profiles & Settings..................................................... 60
Voice command list.................................................. 67
Bluetooth Control 68
Information for using Bluetooth
®
devices ........ 68
Register the Bluetooth device.............................. 69
Bluetooth Setup ........................................................ 72
Playing the Bluetooth Audio Device.................. 73
Using the Hands-Free Unit .................................... 75
Hands-Free Setup ..................................................... 80
Other External Components 81
View Camera............................................................... 81
Use Dashboard Camera.......................................... 84
External audio/video players (AV-IN)................. 85
HDMI source ............................................................... 85
Maestro Features Operation................................. 86
6
Vehicle Status 87
Pitch and Roll............................................................. 87
Setup 88
Monitor Screen Setup............................................. 88
Connection & AV Setup.......................................... 89
Display & Button Setup .......................................... 91
User Interface Setup................................................ 93
System Setup............................................................. 94
Controlling Audio 96
Audio Setup................................................................ 96
Speaker / X’over setup............................................ 97
Equalizer Control...................................................... 99
Listening Position / DTA ........................................100
Fader / Balance..........................................................102
Volume Offset............................................................102
Sound Effect...............................................................103
Parametric Equalizer ...............................................104
Audio Setup memory..............................................107
Remote control (accessory) 108
Battery Installation...................................................108
Functions of the Remote control Buttons.......109
Remote control (optional) 112
Battery Installation...................................................112
Functions of the Remote control Buttons.......113
Connection/Installation 116
Before Installation....................................................116
Installing the accessories.......................................118
Installing the Big Screen model ..........................120
Installing the Separate model .............................124
Connecting the unit ................................................125
Troubleshooting 129
Problems and Solutions.........................................129
Error Messages ..........................................................129
Appendix 131
Playable Media and Files........................................131
Specifications .............................................................133
About this Unit...........................................................136
7
English
Before Use
IMPORTANT
Please read this manual carefully to ensure
proper use before using this product. It is
especially important that you read and observe
WARNINGS and CAUTIONS in this manual.
Please keep the manual in a safe and accessible
place for future reference.
Precautions
# WARNINGS
I To prevent injury or fire, take the
following precautions:
• To prevent a short circuit, never put or leave
any metallic objects (such as coins or metallic
tools) inside the unit.
• Do not watch or fix your eyes on the unit’s
display when you are driving for any
extended period.
• If you experience problems during
installation, consult your KENWOOD dealer.
I Precautions on using this unit
• When you purchase optional accessories,
check with your KENWOOD dealer to make
sure that they work with your model and in
your area.
• You can select a language to display menus,
audio file tags, etc. See System Setup ( (P.94).
• The Radio Broadcast Data System feature
won’t work in areas where the service is not
supported by any broadcasting station.
I Protecting the monitor
• To protect the monitor from damage, do not
operate the monitor using a ball point pen or
similar tool with a sharp tip.
I Cleaning the unit
• If the faceplate of this unit is stained, wipe it
with a dry soft cloth such as a silicon cloth. If
the faceplate is stained badly, wipe it with a
cloth moistened with neutral cleaner, then
wipe it again with a clean soft dry cloth.
NOTE
• Applying spray cleaner directly to the unit may
damage its mechanical parts. Wiping the faceplate
with a hard cloth or using a volatile liquid such as
thinner or alcohol may scratch the surface or erase
the screened print.
I Acquiring GPS signal
The first time you turn on this unit, you must
wait while the system acquires satellite signals
for the first time. This process could take up to
several minutes. Make sure your vehicle is
outdoors in an open area away from tall
buildings and trees for fastest acquisition.
After the system acquires satellites for the first
time, it will acquire satellites quickly each time
thereafter.
I Caution for Smartphone Users
Simultaneously running multiple applications
on your smartphone while screen sharing
places heavy demand on the microprocessor of
the phone, potentially affecting communication
and performance.
For best results while pairing with your
KENWOOD receiver, please be sure to close any
unused applications.
Before Use
8
How to read this manual
• The screens and panels shown in this manual
are examples used to provide a clear
explanation of operations.
For this reason, they may be different from
the actual screens or panels, or some display
patterns may be different from the actual
ones.
• Display language: English is used for the
purpose of explanation. You can select a
display language from the [SETUP] menu. See
System Setup ( (P.94).
• [ ]: Indicates the name of touch keys.
This symbol on the product means there
are important operating and maintenance
instructions in this manual.
Be sure to carefully read instructions in this
manual.
Before Use
9
English
Basic Operations
Functions of the Buttons on the Front Panel
DMX1058XR/DMX1038S/DAX1050XR
① ② ③ ④
⑤
⑥ ⑦
Number Name Motion
① Remote Sensor • Receives the remote control signal.
②
HOME
• Displays the HOME screen. ((P.16)
• When the power is off, turns the power on.
• Pressing for 1 second turns the power off.
③ CAM
• Switches view camera display on/off. ((P.81)
The camera whose view is displayed first changes according to the Camera
Assignment Settings ((P.82) and the shift lever position in the shift gate. The
camera whose view was displayed last is kept and the same camera view will be
displayed the next time. If its assignment setting is changed, the rear camera
view is displayed.
④ MENU/ATT • Displays the popup menu screen.
• Pressing for 1 second switches attenuation of the volume on/off.
⑤ Volume knob
• Adjusts the volume. ((P.12)
⑥ • Displays the APP (Apple CarPlay, Android Auto, or Wireless Mirroring) screen.
• While the APP screen is displayed, switches to the control screen of current
source.
⑦ VOICE
• Switches the voice recognition function on/off. ((P.28) ((P.31) ((P.77)
• When neither Apple CarPlay, Android Auto, nor a Bluetooth Hands-Free phone is
connected, pressing and holding displays Bluetooth pairing waiting dialog.
((P.69)
Basic Operations
10
DAX800XR/DAX8000S
① ②
Number Name Motion
① Screen Touch panel.
② Remote Sensor Receives the remote control signal.
Basic Operations
11
English
Touch screen operations
To perform operations on the screen, you need
to touch, touch and hold, flick or swipe to select
an item, display a setting menu screen or
change pages.
. Touch
Touch the screen gently to select an
item on the screen.
. Touch and hold
Touch the screen and keep your
finger in place until the display
changes or a message is displayed.
. Flick
Slide your finger quickly to the left or
right on the screen to change the
page.
You can scroll a list screen by flicking
up/down on the screen.
. Swipe
Slide your finger up or down on the
screen to scroll the screen.
Turning on the Unit
NOTE
• If it is your first time to turn the unit on after
installation, it will be necessary to perform Initial
SETUP ((P.14).
DMX1058XR/DMX1038S/DAX1050XR
1
Press the
HOME button.
The unit is turned on.
. To turn off the unit:
1
Press and hold the
HOME button.
The unit is turned off.
DAX800XR/DAX8000S
1
Touch the screen.
The unit is turned on.
. To turn the AV off:
1
Touch
at the top of the screen.
2
Touch
AV OFF on the popup menu.
The unit is turned the AV (screen and audio)
off.
Basic Operations
12
NOTE
• If the button is not displayed, set [MENU
Button Display] to "ON". ((P.93)
Adjusting the volume
You can adjust the volume (0 to 40).
DMX1058XR/DMX1038S/DAX1050XR
Turn the knob clockwise to increase, and
counter-clockwise to decrease.
DAX800XR/DAX8000S
1
Touch
at the top of the screen.
2
Touch [-] or [+] on the popup menu.
Holding [+] increases the volume
continuously to level 15.
Basic Operations
13
English
Turn off the screen
DMX1058XR/DMX1038S/DAX1050XR
1
Press the [MENU/ATT] button.
Popup menu appears.
2
Touch [Display OFF] on the popup menu.
DAX800XR/DAX8000S
1
Touch
at the top of the screen.
Popup menu appears.
2
Touch [Display OFF] on the popup menu.
NOTE
• Touch the display to turn on the screen.
• To display the clock while the screen is off, it is
necessary to set "OSD Clock" to "ON". ((P.91)
Put the unit in standby
DMX1058XR/DMX1038S/DAX1050XR
1
Press the
HOME button.
HOME screen appears.
2
Touch
.
3
Touch [STANDBY].
DAX800XR/DAX8000S
1
Touch
at the top of the screen.
Popup menu appears.
2
Touch
HOME on the popup menu.
HOME screen appears.
3
Touch
.
4
Touch [STANDBY].
Basic Operations
14
Initial Settings
Ñ Initial SETUP
Perform this setup when you use this unit first
time.
1
Set each item as follows.
I [Language]
Select the language used for the control
screen and setting items. Default is
"American English(en)”.
① Touch [Language].
② Touch [Language Select].
③ Select the desired language.
④ Touch
.
I [Clock]
Sets the synchronization of the clock. For
details, see Select the time zone and time
format ( (P.15).
I [Display & Button]
Set button illumination color, clock skin,
and viewing angle.
If it is hard to see the image on the screen
even, adjust the viewing angle.
① Touch [Display & Button].
② Set each item and touch
.
For details, see Display & Button Setup
( (P.91).
I [Camera]
Set the parameters for the camera.
① Touch [Camera].
② Set each item and touch
.
For details, see Camera Setup ( (P.81).
I [Maestro SETUP]
Access settings for the iDatalink Maestro
(commercially available), including settings
menus for advanced camera controls,
vehicle diagnostics, OEM Settings menus,
and more. (Requires installation of an
iDatalink Maestro in a compatible vehicle).
I [Vehicle Features]
This function requires a commercial
adaptor. Consult your KENWOOD dealer for
details.
I [DEMO]
Set the demonstration mode. Default is
“ON”.
I [System Configuration]
Configure the digital sound output settings.
For details, see System Configuration
settings ( (P.14).
2
Touch [Finish].
NOTE
• These settings can be made from the SETUP
menu. See Setup ( (P.88).
• When reconfiguring the System Configuration
settings, run Initialize from the System Setup.
Parameters not included in System Configuration
can be configured in SETUP.
• System Configuration settings (except for Built-In
Amplifier) can only be configured during Initial
Setup.
• When configuring the [Fiber Optic Output] and
[Installation Orientation], the system will restart
after the [Finish] button is pressed.
Ñ System Configuration settings
1
Touch [System Configuration] on the
Initial SETUP screen.
I [Fiber Optic Output] (DMX1058XR/
DAX1050XR/DAX800XR only)
Set the output sampling frequency when
using optical digital sound output.
Basic Operations
15
English
① Touch [Fiber Optic Output].
② Select the output sampling frequency.
[OFF] (Default) / [48kHz] / [96kHz]
③ Touch
.
Touch [Finish] and a message will appear.
Touch [Yes] to restart and apply the
settings.
I [X'over Network]
Set X’over Network to either 2-way or 3-
way.
① Touch [X'over Network].
② Read the message and press [Next].
③ Select the crossover network mode.
[2way] (Default) / [3way]
④ Touch [Yes].
# CAUTION
Connecting 3-way speakers with the 2-way mode
selected can break the speakers.
NOTE
• When installing a 3-way speaker, make sure to
always first run Initialize and go through the user
setup. See System Setup ( (P.94).
• X’Over Network settings are disabled when the
[Fiber Optic Output] is set to 48 kHz or 96 kHz.
I [Built-In Amplifier]
Select whether to use the built-in power
amplifier. Turning off the built-in amplifier
improves the quality of the sound from
Preout.
[ON] (Default) / [OFF]
I [Installation Orientation]
Set whether the main unit is oriented
vertically or horizontally.
① Touch [Installation Orientation].
② Select the orientation.
[Horizontal] (Default) / [Vertical]
③ Touch
.
Touch [Finish] and a message will appear.
Touch [Yes] to restart and apply the
settings.
Ñ Select the time zone and time
format
1
DMX1058XR/DMX1038S/DAX1050XR
Press the
HOME button.
DAX800XR/DAX8000S
Touch
at the top of the screen.
Touch
HOME on the popup menu.
HOME screen appears.
2
Touch
.
3
Touch [SETUP].
SETUP Menu screen appears.
4
Touch [System].
System setting menu appears.
5
Set each item as follows.
Scroll the page to show hidden items.
I [Time Format]
Select the time display format.
[12-Hour] (Default) / [24-Hour]
I [Time Zone]
Select the time zone.
Basic Operations
16
Display the HOME screen
DMX1058XR/DMX1038S/DAX1050XR
1
Press the
HOME button.
HOME screen appears.
DAX800XR/DAX8000S
1
Touch
at the top of the screen.
2
Touch
HOME on the popup menu.
HOME screen appears.
Ñ HOME screen descriptions
Most functions can be performed from the
HOME screen.
①
② ③ ④
①
Widget ((P.23)
②
Displays the source selection screen. ((P.18)
③
Displays the SETUP Menu screen. ((P.88)
④
Short-cut playback source icons. ((P.18)
Popup menu
DMX1058XR/DMX1038S/DAX1050XR
1
Press the [MENU/ATT] button.
Popup menu appears.
2
Touch to display the popup menu.
①
The contents of the menu are as follows.
• Displays the Screen Adjustment screen.
((P.88)
• Turns the display off. ((P.13)
• Displays the view camera screen. ((P.81)
• Displays the SETUP Menu screen. ((P.88)
• Displays the Audio screen. ((P.96)
• Displays the control screen of current
source. Icon feature differs depending on
the source. This icon is for USB source.
• Close the popup menu.
① • Short-cut source icons: The source
changes to the one you have set with a
short-cut. For the short-cut setting, refer
to Customize Short-cut source icons
( (P.18).
• Displays the Device List screen. ((P.69)
Basic Operations
17
English
DAX800XR/DAX8000S
1
Touch
at the top of the screen.
Popup menu appears.
2
Touch to display the popup menu.
The contents of the menu are as follows.
• Displays the Device List screen. ((P.69)
• Displays the Screen Adjustment screen.
((P.88)
• Turns the display off. ((P.13)
• Displays the view camera screen. ((P.81)
• Turns ATT on and off.
• Displays the APP (Apple CarPlay, Android
Auto, or Wireless Mirroring) screen.
• While the APP screen is displayed,
switches to the control screen of current
source.
• Close the popup menu.
• Opens the HOME menu. ((P.16)
• Lowers the volume.
• Increases the volume.
• Turns off the screen and audio. Interrupts
from incoming hands-free calls, rear
camera views and so on are functional,
though.
• Switches the voice recognition function
on/off. ((P.28) ((P.31) ((P.77)
• When neither Apple CarPlay, Android
Auto, nor a Bluetooth Hands-Free phone
is connected, pressing and holding
displays Bluetooth pairing waiting
dialog. ((P.69)
Drag an icon (
) to move it left or right
on the upper bar.
Basic Operations
18
Source selection screen
description
You can display icons of all playback sources
and options on the source selection screen.
1
3 4
2
①
Changes playback sources. For playback
sources, see Select the playback source ( (P.18).
②
• Changes pages. (Touch / .)
You can also change pages by flicking left or
right on the screen.
③
Returns to the previous screen.
④
Displays the SETUP Menu screen. ((P.88)
Ñ Select the playback source
1
DMX1058XR/DMX1038S/DAX1050XR
Press the
HOME button.
DAX800XR/DAX8000S
Touch
at the top of the screen.
Touch
HOME on the popup menu.
HOME screen appears.
2
Touch
.
From the screen, you can select the following
sources and functions.
• Switches to the HD Radio broadcast.
((P.41)
• Switches to the Apple CarPlay screen from
the connected iPhone. ((P.27)
• Switches to the Android Auto screen from
the connected Android™ smartphone.
((P.29)
• Displays the Hands-Free screen. ((P.75)
When neither Apple CarPlay, Android
Auto, nor a Bluetooth Hands-Free phone
is connected, displays Bluetooth pairing
waiting dialog.
*1
((P.69)
• Switches to the Wireless Mirroring screen
from the connected Android
smartphone. ((P.26)
• Switches to the SiriusXM® satellite radio
broadcast. ((P.47)
• Plays a Bluetooth audio player. ((P.73)
• Plays an iPhone. ((P.37)
• Plays files on a USB device. ((P.33)
• Plays a device connected to the HDMI
input terminal. ((P.85)
• Switches to an external component
connected to the AV Audio input and the
Video input terminal.
*2
*3
((P.85)
• Puts the unit in standby. ((P.13)
• Switches to the Pitch and Roll screen.
((P.87)
• For sources and information displayed when
an iDatalink Maestro is connected, see
Maestro Features Operation ( (P.86).
*1 When connecting as Apple CarPlay or
Android Auto, it works as a phone provided
in Apple CarPlay or Android Auto. If Apple
CarPlay or Android Auto are connected
during talking by the Bluetooth device or
iDatalink Maestro phone, the current call will
be continued.
*2 You can use the [AV-IN] source when a cable
from a visual source except a camera is
connected to the Video input terminal, and a
cable is connected to the AV Audio input
terminal. ((P.126)
*3 Set “VIDEO IN” to “None” in Camera
Assignment Settings. ((P.82)
Ñ Customize Short-cut source
icons
You can arrange the positions of the source
icons as you like.
Basic Operations
19
English
The 4 items placed in bottom line will appear
on the bottom bar in various screens, as the
short-cut playback source icons.
1
DMX1058XR/DMX1038S/DAX1050XR
Press the
HOME button.
DAX800XR/DAX8000S
Touch
at the top of the screen.
Touch
HOME on the popup menu.
HOME screen appears.
2
Touch
.
3
Touch and hold the icon which you want
to move in the customizing mode.
4
Drag the icon to the desired position.
Changes the page
Source control screen
descriptions
There are some functions which can be
performed from most screens.
1
2
3
4
56
7 8
①
Displays the source selection screen. ((P.18)
②
Displays the SETUP Menu screen. ((P.88)
③ Short-cut source icons
The source changes to the one you have set
with a short-cut. For the short-cut setting, refer
to Customize Short-cut source icons ( (P.18).
④ Function panel *
Touch the right side of the screen to display the
function panel. Touch again to close the panel.
⑤
Connected Bluetooth device information.
⑥ Indicator items
Displays the current source condition and so on.
• “ATT”: The attenuator is active.
• “MUTE”: The mute function is active.
• “LOUD”: The loudness control function is
active.
⑦ Content list *
Displays the track/file/station/channel list.
Basic Operations
20
⑧ Operation keys
You can operate the current source with these
operation keys. The available functions are
different depending on the source type.
* For right hand drive vehicles, the left and right
drawers are swapped. For how to set up the
driving position, see User Interface Setup
( (P.93).
List screen
There are some common function keys in the
list screens of most sources. ((P.35) ((P.39)
((P.74)
Display the list screen
. For USB/iPhone:
1
Touch 1 or the item listed on the
information area in the source control
screen.
The list screen appears.
. For Bluetooth audio:
1
Touch 1.
The list screen appears.
You can use following operation keys from this
screen.
1 2
3 4 5
6
①
Displays the list type selection window.
②
Displays a music/movie file list.
③
etc.
Keys with various functions are displayed here.
•
: Plays all tracks in the folder
containing the current track.
•
: Jumps to the letter you entered
(alphabetical search).
•
: Moves to the upper
hierarchy level.
Basic Operations
21
English
④
Text scroll
Scrolls the displayed text.
⑤
/ / / Page scroll
You can change pages to display more items by
touching
/ .
•
/ : Displays the top or bottom
page.
⑥
Return
Returns to the previous screen.
NOTE
• Depending on the current source or mode, some
function key may not appear.
About radio notifications
Ñ HD Radio Alert Messages
This function is to receive alert messages. First,
you need to turn on the “Emergency Alerts” on
the HD Radio source control screen. ((P.41)
When an Alert Message comes
① ② ③
①
The alert message is erased. Same alert
message cannot be displayed for next 10
minutes.
②
The alert message is erased. Same alert
message cannot be displayed for next 12 hours.
③
Touch to tune to that channel of HD Radio
source.
Display of the received Alert Message
You can read the received alert message
afterward.
1
Touch
on the right side of the HD Radio
source control screen.
Touch [Alert Message Log].
Basic Operations
22
2
Select the desired Alert Message from the
list.
The Alert Message appears.
3
Touch [Close].
Ñ Notification of the start of a
SiriusXM
®
with 360L broadcast
This function notifies you when a broadcast
program related to a registered artist, song, or
team is going to start.
You must first turn on “Notifications” on the
SiriusXM listener settings screen. ((P.63)
When a Notification comes
. Artist or Song Notification
This notifies you that a broadcast program
related to a registered artist or song is going to
start.
1 2
3
①
The source switches to SiriusXM and the
channel broadcasting the program is tuned in.
②
The settings screen is displayed.
③
The notification turns off.
. Team Notification
This notifies you that a broadcast program
related to a team is going to start.
1 2
3
①
The source switches to SiriusXM and the
channel broadcasting the program is tuned in.
②
The settings screen is displayed.
③
The notification turns off.
Basic Operations
23
English
Widget
Widget
1
DMX1058XR/DMX1038S/DAX1050XR
Press the
HOME button.
DAX800XR/DAX8000S
Touch
at the top of the screen.
Touch
HOME on the popup menu.
HOME screen appears.
2
You can change the widget or customize
the widget area.
1
2
3
① Full screen widget panel
You can change the full screen panel widget by
flicking left or right on the widget panel. The
widget is switched in the following sequence:
Album Art, Pitch and Roll, Visualizer, Photo
Frame.
② Flexible source widget panel
• Displays the current source information and
operation keys.
• While playing an audio source, you can
switch the widget panel size between 2-line
and 4-line by touching the right top corner of
the widget panel.
•
(USB/HDMI/AV-IN/Wireless Mirroring
source only):
Displays the source control screen.
•
(HDMI/AV-IN/Wireless Mirroring source
only):
Switches the widget panel orientation
between horizontal and vertical.
③ Drive widget panel
You can change the drive panel widget by
touching the right top corner of the widget
panel. ((P.24)
Photo Frame Widget
You can display a slideshow of the image files
stored in your iPhone or Android smartphone.
Preparation
• See Importing Image Files ( (P.25).
Widget
24
Drive Widget Panel
You can change the widget.
1
DMX1058XR/DMX1038S/DAX1050XR
Press the
HOME button.
DAX800XR/DAX8000S
Touch
at the top of the screen.
Touch
HOME on the popup menu.
HOME screen appears.
2
Touch the right top corner of the drive
widget panel.
The drive widget list appears.
3
Touch the desired widget.
You can select from the following widgets.
• Clock Widget
• Compass Widget
• EQ Setting Widget
• Camera Widget
• iDatalink Maestro Widget *
• ADAS Widget *
* Displayable widgets vary depending on the
type of the connected iDatalink Maestro
(commercially available) and the model of the
vehicle.
To change the widget position
You can change the widget panel position to
right or left. If the drive widget panel position is
changed, the full screen widget panel position
and flexible source widget panel position are
also changed.
1
Touch and hold the drive widget panel.
Widget customize mode is activated.
2
Drag the drive widget to right or left.
Widget
25
English
Importing Image Files
You can display image files stored in your
iPhone or Android smartphone by connecting
your iPhone or Android smartphone in which
the “KENWOOD Portal APP” application is
installed to this unit.
The image files are displayed on the photo
frame widget. Also, you can set an image as the
wallpaper.
See Photo Frame Widget ( (P.23) and To register
an original image ( (P.93).
Preparation
• Install the latest version of the "KENWOOD Portal
APP" application on your iPhone or Android
smartphone.
– iPhone: Search for “KENWOOD Portal APP” in the
Apple App Store to find and install the most
current version.
– Android smartphone: Search for “KENWOOD
Portal APP” in Google Play to find and install the
most current version.
• For details, see “KENWOOD Portal APP” application.
1
Connect the device.
• To connect a device via Bluetooth,
register it as the Bluetooth device and do
the App (SPP) profile setting of the
connection beforehand. See Register the
Bluetooth device ( (P.69) and Switch the
connected device ( (P.70).
• Connect your iPhone with the USB cable
that matches the connector. ((P.127)
2
Unlock your device.
Widget
26
APPS
Wireless Mirroring Operation
You can display the same screen of the Android
smartphone on the monitor of the unit using
the Wireless Mirroring function of the Android
smartphone.
Preparation
• You can use the Wireless Mirroring function with
Android smartphones compatible with this
function.
• This function may be called Wireless Display,
Screen Mirroring, AllShare Cast, etc., depending on
the manufacturer.
• The settings on the Android smartphone differ
depending on the device type. For details, refer to
the instruction manual supplied with your Android
smartphone.
• If your Android smartphone is locked, Mirroring
screen may not appear.
• If the Android smartphone is not ready for UIBC,
you cannot perform touch operation.
1
DMX1058XR/DMX1038S/DAX1050XR
Press the
HOME button.
DAX800XR/DAX8000S
Touch
at the top of the screen.
Touch
HOME on the popup menu.
HOME screen appears.
2
Touch
.
3
Touch [Wireless Mirroring]. ((P.18)
The App screen is displayed.
4
Operate your Android smartphone to
activate the Wireless Mirroring function,
then connect to this unit.
5
Select ("DMX*****"/"DAX*****") as the
network to use.
When the connection is established, then the
same screen displayed on the Android
smartphone is displayed.
NOTE
• Apps is discontinued when the power is turned
ON/OFF or you leave the vehicle. To restart Apps,
operate the Android smartphone.
• When the Apps source is displayed, you cannot
register or reconnect a Bluetooth device. Switch
the Apps source to another source, and then
operate the Bluetooth device.
APPS
27
English
Apple CarPlay Operation
Apple CarPlay is a smarter, safer way to use your
iPhone in the car. Apple CarPlay takes the
things you want to do with iPhone while driving
and displays them on the screen of the product.
You can get directions, make calls, send and
receive messages, and listen to the music from
iPhone while driving. You can also use Siri voice
control to make it easier to operate iPhone.
For details about Apple CarPlay, visit https://
www.apple.com/ios/carplay/.
Compatible iPhone devices
You can use Apple CarPlay with the following
iPhone models.
• iPhone 15 Pro Max • iPhone 12 Pro Max
• iPhone 15 Pro • iPhone 12 Pro
• iPhone 15 Plus • iPhone 12 mini
• iPhone 15 • iPhone12
• iPhone SE(3rd
generation)
• iPhone 11 Pro Max
• iPhone 14 Pro Max • iPhone 11 Pro
• iPhone 14 Pro • iPhone 11
• iPhone 14 Plus • iPhone XS Pro
• iPhone 14 • iPhone XS
• iPhone 13 Pro Max • iPhone XR
• iPhone 13 Pro • iPhone X
• iPhone 13 mini • iPhone SE(2nd
generation)
• iPhone 13
Ñ Connecting an iPhone
Wired connection
1
Connect your iPhone with the USB cable
that matches the connector. ((P.127)
When an iPhone compatible with Apple
CarPlay is connected to the USB terminal, the
Bluetooth Hands-Free phone currently
connected is disconnected. If another
Bluetooth Hands-Free phone is being used,
disconnection will occur after ending the call.
2
Unlock your iPhone.
NOTE
• Depending on the iPhone connector, use a
genuine Apple Lightning-USB cable or a USB-IF
certified USB-C® to USB-A USB cable. If you use
non-certified cable, it may not work properly.
Wireless connection
You can select the iPhone registered in [Device
List] and use it as the Apple CarPlay device.
See Register the Bluetooth device ( (P.69).
NOTE
• Turn on the Bluetooth function and Wi-Fi function
of an iPhone.
• If two or more iPhone have been registered, select
the iPhone to be used as the [Apple CarPlay]
source. See Switch the connected device ( (P.70).
• It is necessary to connect the GPS antenna in order
to use a wireless Apple CarPlay.
• When the Wi-Fi connection becomes unavailable,
the HOME screen is displayed.
• You cannot use Apple CarPlay if the function is
turned off by operating the iPhone at functional
setup.
To switch the Current Screen to the Apple
CarPlay Screen When Connecting Your
iPhone
• Touch [Apple CarPlay] icon on the source
selection screen. ((P.18)
or
• Touch the following connection message if
the message appears.
NOTE
• The connection message appears when;
– The iPhone you used previously is connected
again.
– The screen other than HOME and the source
selection screen is displayed.
• The connection message is displayed for about 5
seconds.
Ñ Operation keys and available
Apps on the home screen of
Apple CarPlay
You can use the Apps of the connected iPhone.
The items displayed and the language used on
the screen differ among the connected devices.
APPS
28
To enter the Apple CarPlay mode, touch [Apple
CarPlay] icon on the source selection screen.
((P.18)
1
2
3
①
*
Switches between Full screen and Split screen
on the Apple CarPlay screen.
②
*
• Displays the home screen of Apple CarPlay.
• Touch and hold to activate Siri.
③ Application keys
Starts the application.
* The icon design may change depending on the
iOS version.
Apple CarPlay split screen
3
1
2
①
*
Switches between Full screen and Split screen
on the Apple CarPlay screen.
②
*
• Displays the home screen of Apple CarPlay.
• Touch and hold to activate Siri.
③
The source selection screen is displayed.
The source can be switched while staying in the
split screen mode.
* The icon design may change depending on the
iOS version.
To exit the Apple CarPlay screen
DMX1058XR/DMX1038S/DAX1050XR
1
Press the
HOME button.
DAX800XR/DAX8000S
1
Touch
.
2
Touch
at the top of the screen.
3
Touch
HOME on the popup menu.
Ñ Use Siri
You can activate Siri.
DMX1058XR/DMX1038S/DAX1050XR
1
Press the [VOICE] button.
2
Talk to Siri.
DAX800XR/DAX8000S
1
Touch
.
2
Touch
at the top of the screen.
3
Touch [VOICE] on the popup menu.
4
Talk to Siri.
To deactivate
DMX1058XR/DMX1038S/DAX1050XR
1
Press the [VOICE] button.
DAX800XR/DAX8000S
APPS
29
English
1
Touch
.
2
Touch
at the top of the screen.
3
Touch [VOICE] on the popup menu.
Ñ Switch to the Apple CarPlay
screen while listening to another
source
DMX1058XR/DMX1038S/DAX1050XR
1
Press the
button.
DAX800XR/DAX8000S
1
Touch
.
2
Touch
at the top of the screen.
3
Touch
on the popup menu.
NOTE
• When listening to another source with the Apple
CarPlay screen displayed, playing music in the
Apple CarPlay mode will switch the current source
to the Apple CarPlay source.
Android Auto™ Operation
Android Auto enables you to use the functions
of your Android smartphone convenient for
driving. You can easily access route guidance,
make calls, listen to music, and access
convenient functions on the Android
smartphone while driving.
For details about Android Auto, visit https://
www.android.com/auto/ and https://
support.google.com/androidauto.
Compatible Android smartphones
Compatible Android phone and compatible
active data plan required. To wirelessly use
Android Auto on your car display, you need a
compatible Android smartphone with an active
data plan. You either need:
1. A smartphone with Android 11 or higher
and 5 GHz Wi-Fi (subject to local
regulations*); or
2. An Android or Samsung smartphone with
Android 10; or
3. A Samsung Galaxy S8, Galaxy S8+, or Note 8,
with Android 9
NOTE
• Android Auto may not be available on all devices
and may not be available in all countries or
regions.
About the placement of smartphone
Install the smartphone connected as Android
Auto device in the place where it can receive
the GPS signals.
When using Google Assistant, install the
smartphone in the place where the smartphone
easily catch a voice by the microphone.
NOTE
• Do not put the smartphone in a spot exposed to
direct sunlight or near an air blowing out port of
an air conditioner. The placement of the
smartphone in such places can lead to
malfunction or damage of your smartphone.
• Do not leave the smartphone in the vehicle.
APPS
30
Ñ Connect Android smartphone
Wired connection
1
Connect an Android smartphone via the
USB terminal. ((P.128)
To use the Hands-Free function, connect the
Android smartphone via Bluetooth. When an
Android smartphone compatible with
Android Auto is connected to the USB
terminal, the device is connected via
Bluetooth automatically, and the Bluetooth
Hands-Free phone currently connected is
disconnected.
2
Unlock your Android smartphone.
3
DMX1058XR/DMX1038S/DAX1050XR
Press the
HOME button.
DAX800XR/DAX8000S
Touch
at the top of the screen.
Touch
HOME on the popup menu.
HOME screen appears.
4
Touch
.
5
Touch [Android Auto]. ((P.18)
Wireless connection
You can select the Android smartphone
registered in [Device List] and use it as the
Android Auto device. See Register the
Bluetooth device ( (P.69).
1
DMX1058XR/DMX1038S/DAX1050XR
Press the
HOME button.
DAX800XR/DAX8000S
Touch
at the top of the screen.
Touch
HOME on the popup menu.
HOME screen appears.
2
Touch
.
3
Touch [Android Auto]. ((P.18)
NOTE
• Turn on the Bluetooth function and Wi-Fi function
of Android smartphone.
• If two or more Android smartphones have been
registered, select the Android smartphone to be
used as the Android Auto source. See Switch the
connected device ( (P.70).
• To change the password for wireless connection
manually, refer to [Reset Android Auto Wireless
Connection] ((P.90).
• When the Wi-Fi connection becomes unavailable,
the HOME screen is displayed.
Ñ Operation keys and available
Apps on the Android Auto
screen
You can perform the operations of the Apps of
the connected Android smartphone.
The items displayed on the screen differ among
the connected Android smartphones.
To enter the Android Auto mode, touch the
[Android Auto] icon on the source selection
screen. ((P.18)
1
2
① Navigation bar
*1
Starts the application or displays information.
② Switch screen
*2
Switches between Full screen and Split screen
on the Android Auto screen.
Android Auto split screen
1
3
2
① Navigation bar
*1
Starts the application or displays information.
APPS
31
English
② Switch screen
*2
Switches between Full screen and Split screen
on the Android Auto screen.
③
The source selection screen is displayed.
The source can be switched while staying in the
split screen mode.
*1 The icon design may change depending on
the Android OS version.
*2 To switch to Split screen, set [Android Auto
Screen Size Switching] to on. ((P.93)
NOTE
• The will be on the left or right depending on
the drive position settings. ((P.93)
• The items displayed and the language used on the
screen differ among the connected devices.
To exit the Android Auto screen
DMX1058XR/DMX1038S/DAX1050XR
1
Press the
HOME button.
DAX800XR/DAX8000S
1
Touch
.
2
Touch
at the top of the screen.
3
Touch
HOME on the popup menu.
DAX800XR/DAX8000S : For remote control
1
Press the [MENU] button on the remote
control.
2
Touch
HOME on the popup menu.
Ñ Using voice control
DMX1058XR/DMX1038S/DAX1050XR
1
Press the [VOICE] button.
2
Start speaking.
DAX800XR/DAX8000S
1
Touch
.
2
Touch
at the top of the screen.
3
Touch [VOICE] on the popup menu.
4
Start speaking.
DAX800XR/DAX8000S : For remote control
1
Press the [VOICE] button on the remote
control.
2
Start speaking.
NOTE
• When you press and hold the [VOICE] button while
inputting voice, you can start over from the
beginning.
• To switch to Split screen, set [Android Auto Screen
Size Switching] to on. ((P.93)
• The
will be on the left or right depending on
the drive position settings. ((P.93)
To cancel
DMX1058XR/DMX1038S/DAX1050XR
1
Press the [VOICE] button.
DAX800XR/DAX8000S
1
Touch
.
2
Touch
at the top of the screen.
3
Touch [VOICE] on the popup menu.
DAX800XR/DAX8000S : For remote control
1
Press the [VOICE] button on the remote
control.
APPS
32
Ñ Switch to the Android Auto
screen while listening to another
source
DMX1058XR/DMX1038S/DAX1050XR
1
Press the
button.
DAX800XR/DAX8000S
1
Touch
.
2
Touch
at the top of the screen.
3
Touch
on the popup menu.
DAX800XR/DAX8000S : For remote control
1
Press the [MENU] button on the remote
control.
2
Touch
on the popup menu.
NOTE
• When listening to another source with the
Android Auto screen displayed, playing music in
the Android Auto mode will switch the current
source to the Android Auto source.
APPS
33
English
USB
Connecting a USB device
1
Connect the USB device with the USB
cable. ((P.128)
2
DMX1058XR/DMX1038S/DAX1050XR
Press the
HOME button.
DAX800XR/DAX8000S
Touch
at the top of the screen.
Touch
HOME on the popup menu.
HOME screen appears.
3
Touch
.
4
Touch [USB]. ((P.18)
Ñ Disconnect the USB device
1
DMX1058XR/DMX1038S/DAX1050XR
Press the
HOME button.
DAX800XR/DAX8000S
Touch
at the top of the screen.
Touch
HOME on the popup menu.
HOME screen appears.
2
Touch a source other than [USB].
3
Detach the USB device.
Ñ Usable USB device
You can use a mass-storage-class USB device
with this unit.
The word “USB device” appearing in this
manual indicates a flash memory device.
. About the file system
The file system should be the one of the
following.
• FAT16 • FAT32 • exFAT • NTFS
NOTE
• Install the USB device in the place where it will not
affect safe driving.
• You cannot connect a USB device via a USB hub
and Multi Card Reader.
• Take backups of the audio files used with this unit.
The files can be erased depending on the
operating conditions of the USB device.
We shall have no compensation for any damage
arising from any erased data.
USB
34
USB Basic Operation
Most functions can be controlled from the
source control screen and playback screen.
NOTE
• DMX1058XR/DMX1038S/DAX1050XR
Set the remote controller mode switch to AUD
mode before starting operation, see Switch the
operation mode ( (P.113).
Control screen
1
2
3
4
5
6
Open the drawer
3
7
6
3 6
① CODEC
When a high-resolution source is played, its
format information is displayed.
② Operation keys
• 1 : Searches track/file. For details on search
operation, see Search Operation ( (P.35).
• E F : Searches the previous/next track/
file.
Touch and hold to fast forward or fast
backward. (It will be cancelled automatically
after about 50 seconds.)
• DH : Plays or pauses.
•
: Displays the Graphic Equalizer screen.
((P.99)
•
: Repeats the current track/folder. Each
time you touch the key, repeat modes are
switched in the following sequence:
File repeat (
), Folder repeat ( ),
Repeat all (
)
•
: Randomly plays all tracks in the
current folder. Each time you touch the key,
random modes are switched in the following
sequence:
Folder random (
), Random off ( )
③ Content list
• Touch the left side of the screen to display
the Content list. Touch again to close the list.
• Displays the playing list. When you touch a
track/file name on the list, playback will start.
④ Track information
Displays the information on the current file.
Only a file name and a folder name are
displayed if there is no tag information.
⑤ Play mode indicator/Playing time
• D, B, etc.: Current play mode indicator
Meanings of individual icons are as follows:
• D (play), B (fast forward), A (fast
backward), H (pause).
• For confirmation of current playing position.
You can drag the circle left or right to change
the playing position.
⑥ Function panel
Touch the right side of the screen to display the
function panel. Touch again to close the panel.
: Searches for the previous/next folder.
⑦ Artwork
The jacket of the currently playing file is
displayed.
USB
35
English
Video screen
8
9
8
⑧ File search area (Video file only)
Touch to search for the next/previous file.
⑨ Key display area (Video file only)
Touch to display the control screen.
Control screen
Video file
⑩
⑩ Hide (Video file only)
Hides the control screen.
Search Operation
You can search music or video files by the
following operations.
1
Touch 1.
2
Touch S.
3
Select a list type.
NOTE
• For operations on the list screen, see List screen
( (P.20).
Ñ Category search
You can search for a file by selecting a category.
1
Touch [Category List].
2
Select whether you search audio files
or video files .
3
Touch the desired category.
The list corresponding to your selection
appears.
4
Touch to select the desired item in the list.
Repeat this step until you find the desired
file.
Ñ Link search (Audio file only)
You can search for a file of the same artist/
album/genre as that in the current track.
USB
36
1
Touch [Link Search].
2
Touch the desired tag type. You can select
from artists, albums and genres.
The list corresponding to your selection
appears.
3
Touch the desired item in the content list.
Ñ Folder search
You can search for a file according to hierarchy.
1
Touch [Folder List].
2
Touch the desired folder.
When you touch a folder its contents are
displayed.
3
Touch to select your desired item in the
list. Repeat this step until you find the
desired file.
USB
37
English
iPhone
Preparation
Ñ Connectable iPhone
The following models can be connected to this
unit.
Made for
• iPhone 15 Pro Max • iPhone 12 Pro Max
• iPhone 15 Pro • iPhone 12 Pro
• iPhone 15 Plus • iPhone 12 mini
• iPhone 15 • iPhone12
• iPhone SE(3rd
generation)
• iPhone 11 Pro Max
• iPhone 14 Pro Max • iPhone 11 Pro
• iPhone 14 Pro • iPhone 11
• iPhone 14 Plus • iPhone XS Pro
• iPhone 14 • iPhone XS
• iPhone 13 Pro Max • iPhone XR
• iPhone 13 Pro • iPhone X
• iPhone 13 mini • iPhone SE(2nd
generation)
• iPhone 13
NOTE
• By connecting your iPhone to this unit with the
USB cable, you can supply power to your iPhone
as well as charge it while playing music. Note that
the power of this unit must be held on.
• If you restart playback after connecting the iPhone,
the music that has been played by the iPhone is
played first.
Ñ Connect iPhone
Wired connection
Preparation
• Connect an iPhone with the USB cable while
Apple CarPlay is not connected.
• With an iPhone compatible with Apple CarPlay,
turn off Apple CarPlay by operating the iPhone at
functional setup before connecting iPhone. For
details of the setup method, contact the
manufacturer of the terminal.
• Only one iPhone can be connected.
• Depending on the iPhone connector, use a
genuine Apple Lightning-USB cable or a USB-IF
certified USB-C® to USB-A USB cable. If you use
non-certified cable, it may not work properly.
1
Connect your iPhone with the USB cable
that matches the connector. ((P.127)
2
DMX1058XR/DMX1038S/DAX1050XR
Press the
HOME button.
DAX800XR/DAX8000S
Touch
at the top of the screen.
Touch
HOME on the popup menu.
HOME screen appears.
3
Touch
.
4
Touch [iPhone]. ((P.18)
. To disconnect the iPhone
connected with the cable:
1
Detach the iPhone.
Bluetooth connection
Pair the iPhone through Bluetooth.
iPhone
38
Preparation
• To connect an iPhone via Bluetooth, register it as a
Bluetooth device and do the profile setting for the
connection beforehand. See Register the
Bluetooth device ( (P.69) and Switch the
connected device ( (P.70).
• Connect an iPhone via Bluetooth while Apple
CarPlay and an iPhone are not connected via USB.
• With an iPhone compatible with Apple CarPlay,
turn off Apple CarPlay by operating the iPhone at
functional setup before connecting iPhone. For
details of the setup method, contact the
manufacturer of the terminal.
. Select the method of making
connections for outputting
sound from the iPhone source
1
DMX1058XR/DMX1038S/DAX1050XR
Press the
HOME button.
DAX800XR/DAX8000S
Touch
at the top of the screen.
Touch
HOME on the popup menu.
HOME screen appears.
2
Touch
.
3
Touch [SETUP].
SETUP Menu screen appears.
4
Touch [Connection & AV].
Connection & AV setting menu appears.
5
Touch [iPhone Bluetooth Connection].
• [Bluetooth] (Default): Output sound
using a Bluetooth device.
• [Bluetooth+HDMI]: Output sound using
an HDMI device and perform music
selection, etc. using a Bluetooth device.
iPhone Basic Operation
NOTE
• DMX1058XR/DMX1038S/DAX1050XR
Set the remote controller mode switch to AUD
mode before starting operation, see Switch the
operation mode ( (P.113).
Control screen
1
2
3
4
Open the drawer
2 5
① Operation keys
• 1 : Searches for a track/file. For details on
search operation, see Search Operation
( (P.39).
• E F : Searches for the previous/next
track/file.
Touch and hold to fast forward or fast
backward. (It will be cancelled automatically
after about 50 seconds.)
• DH : Plays or pauses.
•
: Displays the Graphic Equalizer screen.
((P.99)
•
: Repeats the current track/album. Each
time you touch the key, repeat modes are
switched in the following sequence:
Song repeat (
), All songs repeat (
), Repeat off ( )
•
: Randomly plays all tracks in the
current album. Each time you touch the key,
random modes are switched in the following
sequence:
Song random (
), Random off ( )
iPhone
39
English
② Content list
• Touch the left side of the screen to display
the Content list. Touch again to close the list.
• Displays the playing list. When you touch a
track/file name on the list, playback will start.
NOTE
• The Content list is not displayed unless you select
a file from the category list and play it. To use the
category list, see Search Operation ( (P.39).
③ Track information
• Displays the information on the current file.
• Touch to display the category list screen. See
Category search ( (P.39).
④ Play mode indicator/Playing time
• D, B, etc.: Current play mode indicator
Meanings of individual icons are as follows:
D (play), B (fast forward), A (fast
backward), H (pause).
• For confirmation of current playing position.
You can drag the circle left or right to change
the playing position.
⑤ Artwork
The jacket of the currently being played file is
displayed.
Search Operation
You can search music files by the following
operations.
1
Touch 1.
2
Touch S.
3
Select a list type.
NOTE
• For operations on the list screen, see List screen
( (P.20).
Ñ Category search
You can search for a file by selecting a category.
1
Touch [Category List].
2
Touch the desired category.
The list corresponding to your selection
appears.
3
Touch to select the desired item in the list.
Repeat this step until you find the desired
file.
Ñ Link search
You can search for a file of the same artist/
album/genre/composer as that in the current
track.
1
Touch [Link Search].
iPhone
40
2
Touch the desired tag type. You can select
from artists, albums, genres and
composers.
The list corresponding to your selection
appears.
3
Touch the desired item in the content list.
iPhone
41
English
HD Radio™ Tuner
HD Radio Tuner Basic
Operation
Most functions can be controlled from the
source control screen.
To listen to the HD Radio source, touch [HD
Radio] icon on the source selection screen.
((P.18)
NOTE
• DMX1058XR/DMX1038S/DAX1050XR
Set the remote control mode switch to AUD mode
before starting operation, see Switch the
operation mode ( (P.113).
• HD Radio broadcasting is for North American sales
area only.
Control screen
1
2
3
4
5
Open the drawer
2
7
6
5
8
2
5
9
① Operation keys
• [E] [F] : Tunes in a station. The method
of switching frequencies can be changed (see
④ Seek mode).
• [CHS] [CHR] : Selects a channel.
• [1] : Display the Channel List screen. See
Channel search ( (P.44).
•
: Display a list of registered bookmarks.
See Bookmark list ( (P.45).
•
: Displays the Graphic Equalizer screen.
((P.99)
② Preset list
• Touching / allows you to change the
display size.
• Recalls the memorized station or channel.
• When touched for 2 seconds, stores the
currently being received station or channel in
the memory.
③ Band keys
Switches bands (between FM and AM).
④ Seek mode
Touch to switch seek mode in the following
sequence: [AUTO1], [AUTO2], [MANUAL].
• [AUTO1]: Tunes in a station with good
reception automatically.
• [AUTO2]: Tunes in the memorized stations
one after another.
• [MANUAL]: Switches to the next frequency
manually.
⑤ Function panel
Touch the right side of the screen to display the
function panel. Touch again to close the panel.
• [10key Direct]: Display the direct station/
channel search screen. For details, see Direct
search ( (P.44).
• [AME]: Presets stations automatically. For
details, see Auto memory ( (P.43).
• [RCV]: Change the HD Radio reception mode.
For details, see Receive Mode ( (P.43).
• [PTY] (FM only): Searches for a program by
program type. For details, see Search by
program type ( (P.44).
•
: Stores the information about the song
being received. See Bookmark registration
( (P.45).
HD Radio™ Tuner
42
• [Emergency Alerts] : Turn on or off the alert
message. See HD Radio Alert Messages
( (P.21).
• [Alert Message Log] : Displays the alert
message received. See Display of the
received Alert Message ( (P.21).
⑥ Picture
The picture data or station Logo data is
displayed if available from current content.
⑦ Information display
Displays the information on the current station:
Frequency and Channel
Touching
allows you to switch between
Content A, Content B and Content C.
• Content A: Station name, Song Title, Artist
Name
• Content B: Station Message, HD Radio Text
• Content C: PTY Genre, Album Name
⑧ Indicator Items
• “MC”: A multicast digital broadcast is being
received.
• “EA”:
– White: Emergency Alert is on.
– No light: Emergency Alert is off.
– Orange: Interrupting or in snooze/ignore
state.
• “ST”: A stereo broadcast is being received.
⑨ Indicator display
While receiving an HD Radio station, it lights
with orange when the audio is digital and lights
with gray when it is analog. While receiving an
analog station, it is off.
Adjacent to traditional main stations are HD2/HD3
Channels, providing new original programming on the
FM dial
A music & product discovery feature that enables users
to store information about content on the HD Radio,
and can deliver interactive information via QR codes
Crystal clear, CD-like digital audio quality to consumers;
eliminates background noise
Provides song name, artist, station ID, and other relevant
data to enrich the listening experience
Visual images, such as album art of over-the-air
broadcasts from HD Radio stations
Delivers critical and life-saving messages to the public
during emergency situations
HD Radio™ Tuner
43
English
Receive Mode
You can set the HD Radio broadcasts receive
mode.
1
Touch
on the right side of the screen.
Touch [RCV].
2
Select a receive mode.
I [Auto]
Switch between digital and analog audio
automatically.
I [Digital]
Select this to tune to digital audio only.
I [Analog]
Select this to tune to analog audio only.
Memory Operation
Ñ Auto memory
You can store stations with good reception in
the memory automatically.
1
Touch desired band key.
2
Touch
on the right side of the screen.
Touch [AME].
3
Touch [Yes].
Auto memory starts.
Ñ Manual memory
You can store the currently being received
station or channel in the memory.
1
Select the station or channel you wish to
store in the memory.
2
Touch [FM#] (#:1-15) or [AM#] (#:1-5) in
which you want to store the station or
channel for 2 seconds until a beep
sounds.
HD Radio™ Tuner
44
Selecting Operation
Ñ Preset select
You can list and select memorized stations or
channels.
1
Touch
on the left side of the screen.
Select a station or channel from the list.
Ñ Direct search
You can tune in by entering the desired
frequency or channel number.
1
Touch
on the right side of the screen.
Touch [10key Direct].
2
Select the search method.
3
Enter the frequency or channel number.
4
Touch [Enter].
NOTE
• To clear the number you entered, touch [BS].
Ñ Channel search
You can specify the desired channel.
1
Touch [1].
2
Select the desired content from the list.
NOTE
• Touch [Info Change] in the channel list. Select the
sequence of the list (Song title, artist name, album
name).
Ñ Search by program type
(FM only)
You can tune in the station broadcasting the
specified type of program when listening to FM.
1
Touch
on the right side of the screen.
Touch [PTY].
TUNER PTY Mode screen appears.
2
Select a program type from the list.
HD Radio™ Tuner
45
English
3
Touch [Search].
You can search for the station broadcasting
the selected type of program.
Bookmark
Stores tag information (title, artist, album, URL,
and description) about the song you are
listening to now.
Detailed information and QR codes can be
displayed according to the stored tag
information.
Ñ Bookmark registration
1
Touch
on the right side of the screen.
Touch
.
Registers a bookmark.
NOTE
• Up to 100 bookmarks can be registered to this
unit.
Ñ Bookmark list
Displaying a list of registered bookmarks and
detailed information and QR code of the song.
1
Touch
.
HD Radio™ Tuner
46
2
Select the desired bookmark from the list.
The bookmark information appears.
I [ Delete]
Deletes the bookmarks being displayed.
Touch [Delete] and then touch [YES] on the
confirmation screen.
Bookmark delete
Deleting a bookmark.
1
Touch [Delete].
2
Select the bookmark to delete from the
list.
I [* All]
Select all bookmarks.
I [i All]
Erases all check marks.
3
Touch [Delete].
Confirmation message appears.
4
Touch [Yes].
All the selected bookmark(s) is deleted.
HD Radio™ Tuner
47
English
SiriusXM® with 360L
About SiriusXM
®
Only SiriusXM® brings you more of what you
love to listen to, all in one place. Get over 140
channels, including commercial-free music plus
the best sports, news, talk, comedy and
entertainment. Welcome to the world of
satellite radio. A SiriusXM Vehicle Tuner and
Subscription are required. For more
information, visit www.siriusxm.com.
Preparation
• To use SiriusXM® Satellite Radio, SXV300 tuner (G2)
(sold separately) is necessary.
Activating subscription
• Check your Radio ID.
The SiriusXM Satellite Radio ID is required for
activation and can be found by tuning in Channel
0 as well as on the label found on the SiriusXM
Connect tuner and its package.
The Radio ID does not include the letters I, O, S or
F.
• Activate the SiriusXM Connect Vehicle Tuner using
either one of the two methods below:
– For users in U.S.A.
Online: Visit https://www.siriusxm.com/
activatenow
Phone: Call SiriusXM Listener Care at
1-866-635-2349
– For users in Canada:
Online: Visit https://www.siriusxm.ca/help/
activation-help/
Phone: Call XM customer Care at 1-877-438-9677
Initial settings
Ñ Turning on SiriusXM
®
for the first
time
You must select the area in which SiriusXM® is
to be used and receive approval for using the
service.
1
Select your location (US or Canada), then
touch [OK].
2
Check the SiriusXM usage agreement,
then touch [CONTINUE].
This completes approval.
NOTE
• To change the location selection, you must reset
the system by using [Initialize] in the System
Setup. After resetting, make the settings on the
SiriusXM sourceʼs initial settings screen. ((P.94)
Ñ Start Up Recommendations
When connected to the internet,
recommendations are displayed approximately
twice per day when the SiriusXM source is
powered on.
SiriusXM® with 360L
48
NOTE
• Start Up Recommendations are not displayed
when the device is not connected to the internet.
• This screen may also be displayed other than the
first time SiriusXM is started up.
• To stop it from being displayed, set the StartUp
Recommendation setting at Listener Settings to
OFF. ((P.63)
Ñ Connecting to the Internet
In addition to music, sports and talk shows by
satellite, by connecting to the Internet (using a
smartphone), you can listen to podcasts,
Pandora stations and other streaming channels,
and also register favorites and get notifications.
To use the Internet, the receiver and
smartphone are connected by Wi-Fi.
Connecting to the Internet
1
DMX1058XR/DMX1038S/DAX1050XR
Press the
HOME button.
DAX800XR/DAX8000S
Touch
at the top of the screen.
Touch
HOME on the popup menu.
HOME screen appears.
2
Touch
.
3
Touch [SETUP].
SETUP Menu screen appears.
4
Touch [Connection & AV].
Connection & AV setting menu appears.
5
Touch [360L IP Connection] and set it to
“ON”.
NOTE
• When [360L IP Connection] is set to “ON”, Apple
CarPlay, Android Auto and Wireless Mirroring
cannot be used.
To use Apple CarPlay, Android Auto and Wireless
Mirroring, set [360L IP Connection] to “OFF”.
Registering the Wi-Fi access point
NOTE
• Wi-Fi access points can be registered when [360L
IP Connection] is set to ON. ((P.48)
1
DMX1058XR/DMX1038S/DAX1050XR
Press the
HOME button.
DAX800XR/DAX8000S
Touch
at the top of the screen.
Touch
HOME on the popup menu.
HOME screen appears.
2
Touch
.
3
Touch [SETUP].
SETUP Menu screen appears.
4
Touch [Connection & AV].
Connection & AV setting menu appears.
5
Touch [Wi-Fi].
SiriusXM® with 360L
49
English
6
Select the smartphone you want to
connect from the Access Point List.
7
Enter your password.
is displayed when the Wi-Fi connection
with the selected smartphone is completed.
The SSID for the Wi-Fi connection will appear
on the SETUP screen.
SiriusXM
®
Basic Operation
To listen to the SiriusXM source, touch the
[SiriusXM] icon on the source selection screen.
((P.18)
NOTE
• DMX1058XR/DMX1038S/DAX1050XR
Set the remote controller mode switch to AUD
mode before starting operation, see Switch the
operation mode ( (P.113).
Ñ Satellite broadcasts
Control screen
. Live broadcasts (music and talk channels)
1 2
3
4
6
7
. Sports Play-by-Play (sports channels)
1 2
3
5
6
7
Open the drawer
7
① Search
Use this to search for channels, Pandora stations
and podcast shows using voice command.
((P.57)
②
• : For You
SiriusXM® with 360L
50
A list of recommended channels for the
currently selected listener profile can be
displayed. ((P.54)
•
: Categories
Tunes in channels by category. ((P.55)
•
: My Collection
Displays the list of favorites. ((P.56)
•
: Profiles & Settings
Make SiriusXM-related settings, such as
registering and setting listener profiles,
purchase procedures, etc. ((P.60)
③ Channel display & Related, Set
Notifications
• Displays the information on the current
Channel Logo, Channel Number.
Touch and hold the channel logo to register
or delete SiriusXM Favorites.
★ is displayed next to the channel logos
registered in your favorites.
• [Related]: Searches for other contents related
to the channel you are currently listening to.
((P.58)
•
: Make the notifications settings for the
track, artist or team you are currently
listening to. ((P.59) ((P.60)
④ Information Display (Live Broadcast)
• Displays the album artwork for most SiriusXM
music channels.
• Displays the Show Name/Artist Name/Track
Name.
⑤ Information Display (Sports Play-by-Play)
• Displays information about the game
currently being broadcast.
• [Team Logo], [Team Name]: Touch to switch
the channel to the play-by-play for the home
or away team.
•
: Indicates the currently set play-by-play
team.
• V : For NFL and NCAA football games,
indicates the currently offensive team. (for
supported broadcasts)
• R , S : For MLB games, these indicate the top
half R or bottom half S of the inning. (for
supported broadcasts)
⑥ Operation keys
• [TCH], [CHU]: Selects a channel, and displays
the Linear Tuner screen. ((P.53)
• [L] : Plays or pauses.
• [E], [F]: Time-shifts to the next usable
track/segment. *
1
When touched and held, time-shifts to the
beginning of the buffer.
•
: Displays the Graphic Equalizer screen.
((P.99)
⑦ Preset List
• Touching / allows you to change the
display size.
• Recalls the memorized channel.
When touched for 2 seconds, stores the
currently being received channel in the
memory.
*1 Only when activating the subscription.
Ñ Streaming contents
When connected to the Internet, you can listen
to podcasts, Pandora stations and other
streaming contents.
Control screen
. Podcast
1 2
3
4
5
7
. Pandora Station
1 2
3
4
6
7
SiriusXM® with 360L
51
English
. Xtra Channel
1 2
3
4
5
7
Open the drawer
7
① Search
• Use this to search for channels, Pandora
stations and podcast shows using voice
command. ((P.57)
②
• : For You
A list of recommended channels for the
currently selected listener profile can be
displayed. ((P.54)
•
: Categories
Tunes in channels by category. ((P.55)
•
: My Collection
Displays the list of favorites. ((P.56)
•
: Profiles & Settings
Make SiriusXM-related settings, such as
registering and setting listener profiles,
purchase procedures, etc. ((P.60)
③ Channel display & Related, Set
Notifications
• Displays the information on the current
Content Logo, Content Type Indicator.
• [Related]: Searches for other contents related
to the contents you are currently listening to.
((P.58) (Pandora Station, Xtra Channel only)
• [Episode]: Displays a list of all the podcast
episodes related to the podcast show you are
currently listening to. ((P.58) (Podcast only)
④ Information Display
• Displays artwork area. (Pandora Station, Xtra
Channel only)
• Displays the Show Name/Artist Name/Track
Name.
⑤ Operation keys (Podcast, Xtra Channel)
• [L] : Pauses/resumes the audio stream. *
1
• [E], [F]: Time-shifts to the next usable
track/segment.
When touched and held, time-shifts to the
beginning of the buffer.
•
: Displays the Graphic Equalizer screen.
((P.99)
⑥ Operation keys (Pandora Station)
• [L] : Pauses/resumes the audio stream. *
1
• [F]: Time-shifts to the next usable track/
segment. *
1
When touched and held, time-shifts to the
beginning of the buffer.
•
: Displays the Graphic Equalizer screen.
((P.99)
⑦ Preset List
• Use this function to tune in registered preset
channels with one action or to preset the
currently playing channel. ((P.52)
*1 Only when activating the subscription.
SiriusXM® with 360L
52
Storing Channels in Preset
Memory
The current channel or team can be stored in
the preset memory.
NOTE
• The preset is overwritten.
• A maximum of 15 items can be preset.
. Live Broadcast
1
Tune in the channel you wish to store in
the memory.
2
Touch
on the left side of the screen.
3
Touch any preset list for 2 seconds until a
beep is heard.
. Sports Play-by-Play
1
Touch
on the left side of the screen.
2
Touch any preset list for 2 seconds until a
beep is heard.
3
Touch the channel or team you want to
register.
For satellite broadcasts
21
① Channel tile
The currently broadcasting sports channel is
registered in the presets.
② Away/Home Team tile
Touch the home team or away team you want
to register in the presets.
For streaming contents
Touch the home team or away team you want
to register in the presets.
SiriusXM® with 360L
53
English
Selecting Operation
Ñ Preset select
You can list and select memorized channels.
1
Touch
on the left side of the screen.
Select a channel from the list.
Ñ Linear Tuner
You can tune in a channel.
1
Touch [TCH]/[CHU].
The Linear Tuner screen is displayed. Select
the previous or the next channel.
The selected channel is highlighted.
1
2
4
3
① Channel tile
• Touch a channel to select it and return to the
control screen.
• When touched and held, the channel is
registered as an SXM Favorite.
② [CATEGORIES]
A list of recommended channels for the
currently selected listener profile is displayed.
③ [TCH]/[CHU]
• Touch to move the highlighted channel.
• Touch and hold to scroll through the
channels.
④ DIRECT TUNE
Display the Direct Tune screen. ((P.53)
Switching the channel list display
1
Touch [CATEGORIES].
The Categories Filter button is displayed at
the bottom of the screen.
2
Touch the desired button to specify the
category of the displayed channel list.
Ñ Direct search
You can tune in a channel directly.
SiriusXM® with 360L
54
1
Touch[TCH]/[CHU].
2
Touch [DIRECT TUNE] on the Linear Tuner
screen.
3
Enter the channel number and touch
[GO].
1
2
① Channel logo
Touch and hold to register the channel as an
SXM Favorite.
② [TCH]/[CHU]
Select a channel.
For You
A list of recommended channels for the
currently selected listener profile can be
displayed
1
Touch
.
2
Touch one of the channels on the screen
to start tuning in the selected channel.
NOTE
• Touch and hold the channel to register it in or
delete it from your SiriusXM Favorites. When
registered, ★ is displayed at the channel tile.
• Swipe the screen to switch the displayed channels.
SiriusXM® with 360L
55
English
Categories
Tuning in channels by category
1
Touch
.
2
Use the super category tabs to select the
desired genre.
Super Category Tab
Spotlight Recommendation
NOTE
• The display changes according to the selected
genre.
• Spotlight Recommendation
– Recommended channels are displayed here
(maximum of 2)
– Touch and hold to register in or delete from your
SiriusXM favorites.
When registered, ★ is displayed at the channel
tile.
3
Use the category tiles to select the desired
genre.
A list of channels is displayed.
4
Touch a channel title to start tuning in the
selected channel.
CHANNEL/PODCASTS Tab
List of channels
NOTE
• Touch and hold a channel to register it in or delete
it from your SiriusXM favorites. When registered, ★
is displayed at the channel tile.
• CHANNEL/PODCASTS Tab
– When [ONDEMAND] is selected, a list of podcast
shows is displayed.
– When [CHANNELS] is selected, a list of channels
is displayed.
Ñ List of podcast shows
1
Touch a channel.
2
The list of episodes for the podcast shows
is displayed. When the desired episode is
touched, the screen switches to the
control screen for the selected podcast.
SiriusXM® with 360L
56
My Collection
Displays the list of favorites.
1
Touch
.
2
Touch the tab for the list you want to
display.
I SXM FAVORITES
2
1
3
① Favorite Tile
When touched, the monitor starts tuning in the
selected favorite content.
② [ADD]
The currently playing channel, podcast show or
Pandora station is added to your SiriusXM
favorites
③ [EDIT]
Switches to the SXM FAVORITES edit mode.
I SXM FAVORITES Edit Mode
1
2
① Delete button
When touched, a message for confirming you
want to delete appears.
② Rearrange button
Switches to the Drag & Drop Rearrange mode.
In the Drag & Drop Rearrange mode, the
displayed channels can be dragged & dropped
to rearrange their positions in the list.
I ARTIST STATION
1
2
① Favorite Tile
When touched, the monitor starts tuning in the
selected Pandora station.
② [EDIT]
Switches to the Edit mode.
When in the Edit mode, a message for
confirming you want to delete appears when
the [DELETE] is touched.
SiriusXM® with 360L
57
English
I HISTORY
1
① Favorite Tile
When touched, the monitor starts tuning in the
selected listening history content.
When touched and held, the selected listening
history content is added to or deleted from your
favorites.
SiriusXM Search
Using voice command to search for channels,
Pandora stations or podcast shows.
1
Touch
.
2
The Listening State screen appears, and
the monitor is set to standby for voice
commands.
3
Start speaking.
Refer to the link for the voice commands that
can be used. ((P.67)
NOTE
• Say the term you want to search for.
• Searching is performed, and once the results are
loaded the search results screen appears.
4
Once searching is completed, the search
results screen is displayed.
1
2
3
4
SiriusXM® with 360L
58
① Search Term Spoken
The searched term is reflected on the title of the
screen.
② Search Result Filter Buttons
Filter buttons are displayed according to the
search results.
Ex.: If there are not podcasts in the search
results, the Podcast filter button is not
displayed.
The default folder button is “ALL”.
③ Search Result Tile
When touched, the control screen for the
selected content is displayed.
When touched and held, the content is added
to or deleted from your favorites.
Three long tiles are displayed per page.
④ Search Button
The monitor switches to the voice command
standby mode.
Related Content
Quickly searching for other contents related to
the channel you are currently listening to
. For contents other than podcasts
1
Touch [Related].
2
Touch one of the buttons at the top of the
screen to display the corresponding list.
I RELATED CONTENT
A list of recommended contents related to
the channel the user is currently listening to
is displayed.
I AVAILABLE SHOWS
A list of recommended contents related to
the channel the user is listening to is
displayed.
When a podcast show tile is touched, the
list of episodes of that podcast show is
displayed.
. For podcasts
1
Touch [Episodes].
SiriusXM® with 360L
59
English
2
Touch one of the buttons at the top of the
screen to display the corresponding list.
I EPISODES
A list of all the available episodes of the
podcast show the user is currently listening
to is displayed.
I RELATED CONTENT
A list of recommended contents related to
the podcast the user is currently listening to
is displayed.
Set Artist & Song Notification
Setting notifications for songs and artists from
the control screen. Only satellite contents can
be used.
1
Touch
.
2
Touch the song or artist tile to turn
notifications on or off.
3
Touch [DONE] to check the setting, then
return to the control screen.
NOTE
• Touch [MANAGE] to display the Manage
Notifications screen.
• Depending on the content you are currently
listening to, it may happen that only the artist or
only the song is displayed.
SiriusXM® with 360L
60
Set Team Notification
Setting notifications for the sports team whose
game is currently being broadcast from the
control screen.
Only satellite contents can be used.
1
Touch
.
2
Touch the away team or home team tile to
turn the notifications on or off.
3
Touch [DONE] to enter the setting and
return to the control screen.
NOTE
• Touch [MANAGE] to display the Manage
Notifications screen.
Profiles & Settings
Making SiriusXM-related settings, such as
registering and setting listener profiles,
purchase procedures, etc.
1
Touch
.
2
The main settings menu is displayed.
Flick the sides of the screen to switch.
1
2
3
4
5
① Subscription
Use this function to make and manage
subscriptions. ((P.61)
② Connect your SiriusXM Listener Profile
Use this to manage listener profiles (add and
delete) and perform log-in procedures. ((P.61)
Add listener profiles, or after logging in switch
listener profiles. ((P.62)
SiriusXM® with 360L
61
English
③ Listener Settings
Use this to make settings related to listener
profiles. ((P.63)
④ System Settings
Use these for example to set whether to allow
location information data to be sent to SiriusXM
and to display the radio ID, the SiriusXM
application version, etc. ((P.65)
⑤ Help & Support
Use this to display the radio ID, to display the
telephone number and to call the SiriusXM
customer center and to call (BT HFP
connection), and to display SiriusXM legal
information, etc. ((P.65)
Ñ Subscription
1
Touch [SUBSCRIBE] on the main menu.
2
The subscribe modal screen appears.
I CALL SIRIUSXM
Use this to call SiriusXM.
• You must have a BT HFP connection.
• The telephone number differs in the US
and CANADA (the number displayed is
the one for the country selected on the
initial settings screen.)
I NOT NOW
Cancels the subscription procedure.
Ñ Connect your SiriusXM Listener
Profile
Log-in procedure
1
Touch [LOG IN/SET UP] on the main menu.
2
The subscribe modal screen appears.
Touch [LOG IN] or [GET STARTED].
3
Input your user name (e-mail address).
4
Enter your password.
SiriusXM® with 360L
62
NOTE
• A warning is displayed if your username or
password is not recognized.
– Try Again : The input screen reappears
– Call : Call SiriusXM.
• A warning is displayed if the password does not
conform to policy. Check the password then re-
enter it.
• Touch [Password Policy] on the screen to display
the password policy.
5
Touch [CHANGE NAME] to change the
listener name.
If not, Touch [CONTINUE].
NOTE
• If you Touch CONTINUE, the default avatar and the
start of the e-mail address before the “@” is
reflected on the profile, and the procedure skips
ahead to step 7.
6
Enter the listener name. (This is only
displayed if [CHANGE NAME] was
Touched.)
7
The listener name is reflected on the
profile tile.
NOTE
• The default avatar and the changed listener name
are displayed.
I Warning message
The user name or password was not recognized.
I Password policy screen
When logged in
To add a profile
1
Touch [MANAGE] on the main menu.
SiriusXM® with 360L
63
English
2
Touch [Add Listener].
3
Touch [LOG IN] or [GET STARTED] to add a
profile.
When logged in
To switch profiles (when multiple profiles
are registered)
1
Touch [MANAGE] on the main menu.
2
Touch the profile tile to switch listeners.
3
The newly selected profile is displayed.
NOTE
• Touch and hold the avatar tile to sign out and
switch screens.
Ñ Listner Settings
1
Touch [MANAGE] on the main menu.
2
The setting items are displayed.
Flick the sides of the screen to switch.
1
2
3
4
5
SiriusXM® with 360L
64
① Edit Listener
Use this to change the listener profile's avatar
icon and to edit the user name. ((P.64)
② Notifications
Use this to turn song/artist and team
notifications on and off and to manage (add or
delete) them. ((P.64)
③ Tune Start
Set whether to enable or disable automatic
starting from the beginning of the song or news
program when you tune in (Tune Start function)
④ Start Up Recommendations
Set whether or not to display start-up
recommendations when switching to a
SiriusXM source. ((P.47)
⑤ Reset History
Resets the listening history. Touch [RESET
HISTORY] to start the resetting operation.
Edit Listener
1
Touch [CHANGE AVATAR] or [EDIT NAME].
I CHANGE AVATAR
After selecting the avatar, touch [DONE].
I EDIT NAME
Enter the name.
Notifications
1
Touch [MANAGE].
The notifications settings screen is displayed.
2
Touch [ARTISTS & SONGS] or [TEAMS].
I ARTISTS
＆
SONGS
Touch the ARTISTS & SONGS tile to register
or delete.
I TEAMS
Touch a team tile to register or delete.
SiriusXM® with 360L
65
English
Touch [Add Team] to register an additional
team. First select the league, then select the
team.
Ñ System Settings
1
Touch [MANAGE] on the main menu.
2
The System Settings screen is displayed.
1
2
① Connect your SiriusXM Listener Profile
Use this to display the radio ID and SiriusXM
application version.
② Radio ID/Version
Use this to authorize sending location data to
SiriusXM.
Ñ Help & Support
1
Touch the desired support item on the
main menu.
1
3
2
① Contact SiriusXM
Switches the screen to the Contact SiriusXM
screen.
If you have a BT HFP connection, touch [CALL
SIRIUSXM] to phone the Sirius support center.
② SiriusXM Legal
Switches to the SiriusXM Legal screen.
SiriusXM® with 360L
66
③ Your Privacy Choices
Switches to the Your Privacy Choices screen.
SiriusXM® with 360L
67
English
Voice command list
Operations can be performed by voice using the commands on this list.
Category Voice commands Speech examples
Channel Number
Channel Name
Show Name
Episode Name
Play <Category>
Listen to <Category>
Tune to <Category>
Change to <Category>
Switch to <Category>
Go to <Category>
Search for <Category>
Find <Category>
Look for <Category>
Play "Channel 100"
Play "Hits 1"
Play "The Morning Mashup"
Search for " SiriusXMU - Foals"
Super Category
Category
Search for <Category>
Search <Category>
Find <Category>
Go to <Category>
Switch to <Category>
Go to <Category>
Look for <Category>
Tune to <Category>
Play <Category>
Listen to <Category>
Take me to <Category>
Where do I find <Category>
Show me <Category>
Open <Category>
Search for "Sports"
Search for "Rock"
Host Search for <Category>
Search <Category>
Find <Category>
Look for <Category>
<Category>
Search for "Howard Stern"
Artist Name
Band Name
Search for <Category>
Search <Category>
<Category>
Search for <Category> Radio
Search <Category> Radio
Search for "Florence and the
Machine"
Countdown Search for <Category> Search for "80s Countdown"
Sport
Live Sports
Search for <Category> Search for "Basketball"
Team / Game Search for <Category>
<Category>
Search for "Rockies Game"
Event
Event Name
Search for <Category>
<Category>
Search for "New York Comic Con"
SiriusXM® with 360L
68
Bluetooth Control
Using the Bluetooth function allows you to use
various functions such as listening to the audio
file and making/receiving a call.
Information for using
Bluetooth
®
devices
Bluetooth is a short-range wireless radio
communication technology for mobile devices
such as smartphones/cell-phones, portable PCs,
and other devices.
Bluetooth devices can be connected without
cables and communication with each other.
NOTE
• While driving, do not perform complicated
operations such as dialing numbers, using the
phonebook, etc. When you perform these
operations, stop your car in a safe place.
• Some Bluetooth devices may not be connected to
this unit depending on the Bluetooth version of
the device.
• This unit may not work for some Bluetooth
devices.
• Connecting conditions may vary depending on
your environment.
• Some Bluetooth devices are disconnected when
this unit is turned off.
• The Bluetooth devices cannot be used while using
Apple CarPlay.
• The Bluetooth currently connected with other
device is disconnected when an iPhone
compatible with Apple CarPlay is connected.
Ñ About the smartphone/cell-
phone and Bluetooth audio
player
This unit conforms to the following Bluetooth
specifications:
Version
• Bluetooth Ver. 5.2
Profiles
• Smartphone/cell-phone:
– HFP (V1.7) (Hands Free Profile)
– SPP (Serial Port Profile)
– PBAP (Phonebook Access Profile)
• Audio player:
– A2DP (Advanced Audio Distribution
Profile)
– AVRCP (V1.6) (Audio/Video Remote
Control Profile)
Sound codec
• DMX1058XR/DAX1050XR/DAX800XR
LDAC, SBC, AAC
• DMX1038S/DAX8000S
SBC, AAC
NOTE
• The units supporting the Bluetooth function have
been certified for conformity with the Bluetooth
Standard according to the procedure prescribed
by Bluetooth SIG.
• However, it may be impossible for such units to
communicate with your smartphone/cell-phone
depending on its type.
Bluetooth Control
69
English
Register the Bluetooth device
It is necessary to register the Bluetooth audio
player or smartphone/cell-phone in this unit
before using the Bluetooth function.
You can register up to 10 Bluetooth devices.
NOTE
• Up to 10 Bluetooth devices can be registered. If an
attempt is made to register the 11th Bluetooth
device, the Bluetooth device connected on the
earliest date will be deleted to register the 11th
one.
• This unit is compatible with the Apple Easy Pairing
function. When an iPhone connected via USB
terminal previously is connected again, an
authentication dialog appears. Performing
operation for authentication on this unit, or iPhone
registers the smartphone as a Bluetooth device.
1
DMX1058XR/DMX1038S/DAX1050XR
Press the
HOME button.
DAX800XR/DAX8000S
Touch
at the top of the screen.
Touch
HOME on the popup menu.
HOME screen appears.
2
Touch
.
3
Touch [SETUP].
SETUP Menu screen appears.
4
Touch [Connection & AV].
5
Touch [Device List].
6
Touch
.
Bluetooth pairing waiting dialog appears.
NOTE
• If an Apple CarPlay device is currently connected,
the Apple CarPlay device will be disconnected.
• When neither Apple CarPlay, Android Auto, nor a
Bluetooth Hands-Free phone is connected,
pressing and holding the [VOICE] button displays
Bluetooth pairing waiting dialog.
7
Search for the unit
("DMX*****"/"DAX*****") from your
smartphone/cell-phone.
Complete steps 7 to 9 within 30 seconds.
8
Operate your smartphone/cell-phone
according to the displayed messages.
. Confirm the request both on the
smartphone/cell-phone.
. Input the PIN Code in your
smartphone/cell-phone.
PIN Code is set to “0000” as the default.
Bluetooth Control
70
9
Touch [Yes].
When data transmission and connection
have completed, the Bluetooth connection
icon appears on the screen.
NOTE
• When registering the iPhone that is available for
Apple CarPlay wirelessly, a confirmation message
appears.
– [Yes]: Displays the Apple CarPlay screen for
wireless connection.
– [No]: Apple CarPlay is not connected. When
using Apple CarPlay, select the iPhone to be
used as the [Apple CarPlay] source. See Switch
the connected device ( (P.70).
• The device name selected on step 7 can be
changed. See Change the device name ( (P.72).
Ñ Switch the connected device
If two or more Bluetooth devices have been
registered, select the device to be used.
1
Touch [Device List] in the Connection &
AV setting menu.
2
Touch the name of the device you want to
connect.
NOTE
• If the icon is lighted, it means that the unit will use
that device.
• You can confirm the connection status of
Bluetooth, Apple CarPlay or Android Auto as
follows.
– Bluetooth: If the device compatible with
Bluetooth is paired,
(Blue), (White) or
(Blue) is lighted.
– Apple CarPlay: If the device compatible with
Apple CarPlay is connected, the device name
(Blue) and
(White) are lighted.
– Android Auto: If the device compatible with
Android Auto is connected, the device name
(Blue) and
(White) are lighted.
• Even if the device is compatible with Apple
CarPlay or Android Auto, icons are not displayed
when;
– Apple CarPlay is deactivated on the connected
device side.
– The connected device only supports wired
Android Auto.
• If you select a device name to which the Apple
CarPlay or Android Auto is connected, it will be
disconnected.
• You can quickly display the Device List screen by
touching
(Device List) in the popup menu.
((P.16)
To switch the connected device to a
Bluetooth device
1
Touch [Bluetooth] on the Device List
screen.
Bluetooth device list appears.
2
Touch the name of the Bluetooth device
you want to connect.
NOTE
• In the following cases, a confirmation message for
disconnection appears. Touch [Yes] and follow to
next step 2.
– Select any device when Apple CarPlay is
connected.
– Select the connected device when Android Auto
is connected.
Bluetooth Control
71
English
3
Set each profile as follows.
I [TEL (HFP) 1], [TEL (HFP) 2]
Select when the device is connected with
the unit as Hands-Free phone 1 or 2.
I [Audio (A2DP)/App (SPP)]
Select to use as an audio player or to
interwork with an application installed in a
smartphone.
4
Touch [Close].
To delete the registered device
You can delete the device that is registered as
Bluetooth source or Apple CarPlay source.
When you delete a Bluetooth device which
supports Android Auto, the device is also
deleted from the Android Auto device list.
1
Touch
on the Device List screen.
2
Touch the device name to check.
I [* All]
Selects all Bluetooth devices.
I [i All]
Clears all check marks.
NOTE
• You cannot select a device currently connected.
• When you select Android Auto tab,
is not
displayed.
3
Touch [Delete].
Confirmation message appears.
4
Touch [Yes].
All the selected device(s) is deleted.
Bluetooth Control
72
Bluetooth Setup
NOTE
• The Bluetooth Setup is disabled while using Apple
CarPlay
1
DMX1058XR/DMX1038S/DAX1050XR
Press the
HOME button.
DAX800XR/DAX8000S
Touch
at the top of the screen.
Touch
HOME on the popup menu.
HOME screen appears.
2
Touch
.
3
Touch [SETUP].
SETUP Menu screen appears.
4
Touch [Connection & AV].
Connection & AV setting menu appears.
5
Touch [Bluetooth] and set to [ON].
See the following section for each setting.
• Change the PIN Code ((P.72)
• Change the device name ((P.72)
• Change the settings for Hands-Free
function, see Hands-Free Setup ( (P.80).
NOTE
• For the other setting items on this screen, see
Connection & AV Setup ( (P.89).
Ñ Change the device name
1
Touch [Device Name] in the Connection &
AV setting menu.
Change Device Name screen appears.
2
Touch and hold
.
3
Input the device name.
4
Touch [Enter].
Ñ Change the PIN Code
1
Touch [PIN Code] in the Connection & AV
setting menu.
Change PIN Code screen appears.
2
Touch and hold
.
3
Input the PIN Code.
4
Touch [SET].
Bluetooth Control
73
English
Playing the Bluetooth Audio
Device
Most function can be controlled from the
source control screen.
To select Bluetooth source, touch [Bluetooth
Audio] icon on the source selection screen.
((P.18)
NOTE
• The Bluetooth audio source is disabled while using
Apple CarPlay.
• The Bluetooth audio source is disabled when the
device set as Audio(A2DP)/App(SPP) is using
Android Auto.
Ñ Bluetooth basic operation
Control screen
1
2
3
4
5
6
① Operation keys *
• 1 : Searches for a file. See File search
( (P.74).
• E F : Searches for the previous/next
content.
Touch and hold to fast forward or fast
backward. (It will be cancelled automatically
after about 50 seconds.)
• DH : Plays or pauses.
•
: Displays the Graphic Equalizer screen.
((P.99)
•
: Repeats the current track/folder. Each
time you touch the key, repeat modes are
switched in the following sequence:
File repeat (
), Folder repeat ( ), All
songs repeat (
), Repeat off ( )
•
: Randomly plays all tracks in the
current folder. Each time you touch the key,
random modes are switched in the following
sequence:
Folder random (
), All random ( ),
Random off (
)
② Information display *
• Displays the name of track information.
• Connected device name.
③ Play mode indicator/Playing time
D, H: Current play mode indicator
Meanings of individual icons are as follows:
D (play), B (fast forward), A (fast
backward), H (pause), I (stop).
④ KENWOOD Music Mix
Bluetooth audio devices can be switched easily
to play music. See KENWOOD Music Mix
( (P.74).
⑤
Displays the Connection & AV setting menu.
((P.72)
⑥ CODEC (DMX1058XR/DAX1050XR/
DAX800XR only)
When an LDAC-compatible device is connected,
“LDAC” is displayed.
* These items appear only when the audio player
which supports AVRCP profile is connected.
NOTE
• The operation keys, indications and information
displayed on the screen differ depending on the
connected device.
• If the operation keys do not appear, operate from
the player.
• Depending on your smartphone/cell-phone or
audio player, sound may be heard and controlled
but text information may not appear.
• If the volume is too low, raise it on your
smartphone/cell-phone or audio player.
• It is recommended that you change the playback
quality from “priority on sound quality” to “priority
on stable connection” in the settings of your
LDAC-compatible device so that the intermittent
sound problem is less likely to occur.
(DMX1058XR/DAX1050XR/DAX800XR only)
Bluetooth Control
74
Ñ KENWOOD Music Mix
Up to 5 Bluetooth audio device can be
connected and switched easily to play music.
1
Touch
.
A list of registered devices is displayed.
2
Touch
of device name you want to
connect.
• Touching
displays the Device List
screen. ((P.69)
• Touching
on the left of the
connected device (
) disconnects
this device.
• : Device used normally.
•
: Device used for KENWOOD Music
Mix.
3
Touch
(White/dark blue background)
on the left of the name of the device to be
played.
The background changes from dark to light
blue and starts playback.
• (Gray) : Not connected.
•
(White/dark blue background) :
Connected.
•
(White/light blue background) :
During playback.
4
Touch
.
NOTE
• If a connected Bluetooth audio device is operated
to play music, connections are switched.
• When a Bluetooth source is switched to another
one, its settings are deleted and the connection is
restored to the connection before source
switching.
• You cannot select an Android smartphone
connected as an Android Auto device.
Ñ File search
1
Touch 1.
2
Touch the desired file or folder.
When you touch a folder its contents are
displayed.
3
Touch the desired item in the content list.
Playback starts.
NOTE
• For operations in the list screen, see List screen
( (P.20).
Bluetooth Control
75
English
Using the Hands-Free Unit
You can use the telephone function by
connecting the Bluetooth telephone to this
unit.
NOTE
• If you use the Hands-Free function frequently,
move the TEL short-cut key (icon) to the Home
screen. ((P.18)
• While using the Bluetooth Hands-Free function,
Apple CarPlay or Android Auto is not available.
• While Apple CarPlay or Android Auto is connected,
the Bluetooth Hands-Free function and two
Bluetooth devices connections cannot be used.
Only the Apple CarPlay or Android Auto Hands-
Free function can be used.
Ñ Make a call
1
DMX1058XR/DMX1038S/DAX1050XR
Press the
HOME button.
DAX800XR/DAX8000S
Touch
at the top of the screen.
Touch
HOME on the popup menu.
HOME screen appears.
2
Touch
.
3
Touch [TEL].
Hands-Free screen appears.
NOTE
• If your smartphone/cell-phone supports PBAP, you
can display the phonebook and call lists onto the
touch panel screen when the smartphone/cell-
phone is connected.
– Phonebook: up to 1000 entries
– Up to 50 entries including dialed calls, received
calls, and missed calls
4
Select a dialing method.
• : Call using call records
•
: Call using the phonebook
•
: Call using the preset number
•
: Call by entering a phone number
. Select the smartphone/cell-
phone to use
When you connect two smartphones/cell-
phones
1
Touch
to
select the phone you want to use.
. Bluetooth Setup
1
Touch
.
Connection & AV setting menu appears.
((P.72)
. Voice Recognition
1
Touch
. ((P.77)
NOTE
• Status icons such as battery and antenna icons
may differ from those displayed on the
smartphone/cell-phone.
• Setting the smartphone/cell-phone in the private
mode can disable the Hands-Free function.
Call using call records
1
Touch
.
Bluetooth Control
76
2
Select the phone number from the list.
Call using the phonebook
1
Touch
.
2
Touch
.
3
Select the initial.
• Characters with no corresponding name
will not appear.
• A first character with an accent character
such as “ü” can be searched for with a
non-accent character “u” . A character
with an accent character in a sentence
cannot be searched for.
4
Select the person you want to call from
the list.
5
Select the phone number from the list.
NOTE
• You can sort the phone numbers in the list by last
name or first name. For details, see Hands-Free
Setup ( (P.80).
• When Russian is selected in “Language Select”
((P.94), you can switch between English keyboard
and Russian keyboard.
• When Hebrew is selected in “Language Select”
((P.94), you can switch between English keyboard
and Hebrew keyboard.
• You can search with 3 initial letters on the English
keyboard and 1 initial letter on the Russian /
Hebrew keyboard.
Call using the preset number
1
Touch
.
2
Touch the name or phone number.
Call by entering a phone number
1
Touch
.
2
Enter a phone number with number keys.
Bluetooth Control
77
English
3
Touch
.
Ñ Voice Recognition
You can access the voice recognition function
of the smartphone/cell-phone connected to
this unit. You can search the smartphone/cell-
phone phonebook by voice. (The functionality
depends on the smartphone/cell-phone.)
DMX1058XR/DMX1038S/DAX1050XR
1
Press the [VOICE] button.
Voice Recognition screen appears.
2
Start speaking.
DAX800XR/DAX8000S
1
Touch
at the top of the screen.
2
Touch [VOICE] on the popup menu.
3
Start speaking.
NOTE
• You can use the voice recognition function by
touching
on the Hands-Free screen.
• You can use the voice recognition function for the
connected smartphone/cell-phone if you selected
[TEL (HFP) 1] or [TEL (HFP) 2] for HFP when
registered.
Ñ Receive a call
1
Touch
to answer a phone call or
to reject an incoming call.
NOTE
• When shifting the gear to the reverse (R) position
and monitoring the picture from the rear view
camera, this screen does not appear even if a call
comes in.
• The portrait registered in the phonebook is
displayed while making/receiving calls and during
a call.
• If you edit the phonebook on the connected
device side after downloading the phonebook, the
portrait may not be displayed depending on the
edited content. It is recommended that you
download the phonebook whenever you edit it.
• The image quality of a displayed portrait may
depends on a connected device.
To end call
1
While talking, touch
.
Ñ Operations during a call
. Adjust call sound quality.
1
Touch [Speech Quality].
Bluetooth Control
78
2
Touch T or Uto adjust each parameter.
I [Microphone Level]
Adjust the level of microphone gain.
Default is “0”.
I [Echo Cancel Level]
Adjust the level of echo cancellation.
Default is “0”.
I [Noise Reduction Level]
Reduce the noise generated in the
surrounding environment without
changing the microphone volume.
Use this function when the voice of caller is
not clear. Default is “0”.
I [Time Alignment] (DMX1058XR/
DAX1050XR/DAX800XR only)
If the delay in the digital sound output is
disrupting the Echo Canceling of hands-
free sound, adjust the sound delay time.
Default is “20”.
This can be adjusted when the digital
sound output settings are on.
. Adjust the receiver volume
DMX1058XR/DMX1038S/DAX1050XR
1
Turn the volume knob clockwise to
increase, and counter-clockwise to
decrease.
DAX800XR/DAX8000S
1
Touch
at the top of the screen.
2
Touch [-] or [+] on the popup menu.
. Mute your voice
Touch
to mute or not to mute your voice.
. Output the dial tone
Touch [DTMF] to display the tone input screen.
You can send tones by touching desired keys
on the screen.
. Switching between speaking
voice output destinations
Touching
/ each time switches
speaking voice output destinations between
the smartphone/cell-phone and the speaker.
. Call-waiting
When you receive a new call while talking on
the phone, you can answer the newly received
call by touching
. The current call is put on
hold.
Each time you touch
, the caller will change
to the other one.
When you touch
, the current call will end to
be switched to the call waiting on hold.
Ñ Phone number preset
You can register frequently used phone
numbers in this unit.
1
Touch
.
2
Touch [Edit].
3
Select where to preset.
Bluetooth Control
79
English
I [Delete all]
To delete all preset numbers, touch [Delete
all] and then touch [Yes] on the
confirmation screen.
4
Select how to preset.
I [Add number from phonebook]
Select the number to preset from the
phonebook.
I [Add number direct]
Enter the telephone number directly and
touch [SET].
I [Delete]
To delete a preset number, touch [Delete]
and then touch [OK] on the confirmation
screen.
Ñ Phonebook transfer
You can transfer phonebook data from your
Bluetooth smartphone using PBAP.
1
Touch
.
2
Touch
.
Phonebook data transfer starts.
NOTE
• If the Phonebook contains more than 1000 entries,
only 1000 entries are transferred. The 1001st and
later entries are not transferred.
• If no Phonebook has been downloaded, touching
[Download Phonebook Now] will start
downloading the Phonebook.
• The portrait registered in the phonebook is
displayed while making/receiving calls and during
a call.
If you edit the phonebook on the connected
device side after downloading the phonebook, the
portrait may not be displayed depending on the
edited content. It is recommended that you
download the phonebook whenever you edit it.
Phonebook deletion
1
Touch
.
2
Touch the name to check.
I [* All]
Checks all boxes.
I [i All]
Clears all check marks.
3
Touch [Delete].
Confirmation message appears.
4
Touch [Yes].
Bluetooth Control
80
Hands-Free Setup
You can make various settings for the Hands-
Free function.
1
DMX1058XR/DMX1038S/DAX1050XR
Press the
HOME button.
DAX800XR/DAX8000S
Touch
at the top of the screen.
Touch
HOME on the popup menu.
HOME screen appears.
2
Touch
.
3
Touch [SETUP].
SETUP Menu screen appears.
4
Touch [Connection & AV].
Connection & AV setting menu appears.
5
Touch [TEL SETUP].
TEL SETUP screen appears.
6
Set each function as follows.
I [Bluetooth HF/Audio]
Select the speakers to output the sound
from the smartphone/cell-phone (such as
phone call voice and ringing tone) and
Bluetooth audio player.
• [Front]: Outputs sound from the front
speakers.
• [All] (Default): Outputs sound from all
speakers.
I [Auto Response]*
Set the automatic response time to pick-up
an incoming call.
• [OFF] (Default): Turns off the Automatic
response function.
• [1]/[5]/[10]/[15]/[20]/[25]/[30]: Sets the
ringing time (second).
* Either the auto response time set on this
unit or the time set on the smartphone/
cell-phone, whichever is shorter takes
effect.
I [Auto Pairing]
When set to “ON”, the Apple Auto Pairing
function is turned on to automatically
register the iPhone connected to this unit.
• [ON] (Default): Turns on the Apple Auto
Pairing function.
• [OFF]: Turns off the Apple Auto Pairing
function.
I [Sort Order]
Set how to sort the data in the smartphone/
cell-phone phonebook.
• [First] (Default): Sorts data by the first
name.
• [Last]: Sorts data by the last name.
7
Touch [OK].
Bluetooth Control
81
English
Other External Components
View Camera
NOTE
• To connect a camera, see Connecting the camera
( (P.128).
• To use a rear view camera, a REVERSE lead
connection is required. ((P.125)
• If [Rear Camera Interruption] is active the camera
screen is displayed when you shift the gear to the
reverse (R) position.
• The camera whose view was displayed last is kept
and the same camera view will be displayed the
next time. If its assignment setting is changed, the
rear camera view is displayed.
• Rear/front camera interruption screen is not kept
as the camera screen which will be displayed the
next time.
Ñ Display the camera screen
1
DMX1058XR/DMX1038S/DAX1050XR
Press the [MENU/ATT] button.
DAX800XR/DAX8000S
Touch
at the top of the screen.
Popup menu appears.
2
Touch [Camera].
DMX1058XR/DMX1038S/DAX1050XR
DAX800XR/DAX8000S
View camera screen appears.
3
Adjust each item as follows.
1
3
2
4
① Camera Switching Keys *
1
Touch to switch the view camera. It is necessary
to set “Camera Assignment Settings”
beforehand except “Rear”. See To set up the
camera assignment settings ( (P.82).
② Camera off
Touch to exit the camera screen.
③ Switching the Guideline *
2
Touching each time turns on or off the
guideline.
④ Switching the Angle *
2
Touching each time changes camera angles.
*1 When two or more cameras of rear, front,
dashboard, left, and right are connected with
this unit.
*2 Only when the rear camera screen is
displayed and CMOS-3xx series is connected
with this unit as the rear camera.
Ñ Camera Setup
1
DMX1058XR/DMX1038S/DAX1050XR
Press the
HOME button.
DAX800XR/DAX8000S
Touch
at the top of the screen.
Touch
HOME on the popup menu.
HOME screen appears.
2
Touch
.
3
Touch [SETUP].
SETUP Menu screen appears.
4
Touch [Camera].
Camera setting menu appears.
Other External Components
82
5
Set each item as follows.
I [Camera Assignment Settings]
Set up the camera assignment. See To set
up the camera assignment settings
( (P.82).
I [Rear Camera Interruption]
• [ON] (Default): Displays the picture from
the rear view camera when you shift the
gear to the reverse (R) position.
• [OFF]: Select this when no camera is
connected.
I [Rear Camera Message] *
1
• [Always display] (Default): Always
displays the caution message on the rear
camera interruption screen.
• [Clear after 5 seconds]: Displays the
caution message for about 5 seconds on
the rear camera interruption screen.
I [Rear Camera Settings] *
2
Adjusts the CMOS-3xx series with ID 1
("Rear Camera") set. For details, see the
instruction manual of your camera.
I [Parking Guidelines]
You can display parking guidelines to
enable easier parking when you shift the
gear to the reverse (R) position.
Default is “ON”.
I [Guidelines SETUP]
If you select [ON] for [Parking Guidelines],
you can adjust the parking guidelines. See
To adjust the parking guidelines ( (P.83).
I [Front Camera Settings] *
3
Adjusts the CMOS-3xx series with ID 2
("Front Camera") set. For details, see the
instruction manual of your camera.
I [Front Camera Interruption] *
4
• [10 sec]/[15 sec] (Default)/[20 sec]: The
front camera screen is displayed when
return the gear from the reverse (R)
position.
• [OFF]: Cancel.
*1 To use the function, it is necessary to set [Rear
Camera Interruption] to [ON].
*2 When CMOS-3xx series is connected with this
unit.
*3 To use the function, it is necessary to connect
CMOS-3xx series and to set [Camera
Assignment Settings] to [Front]. ((P.82)
*4 To use the function, it is necessary to set [Rear
Camera Interruption] to [ON], and to set
[Camera Assignment Settings] to [Front].
((P.82)
Ñ To set up the camera assignment
settings
1
Touch [Camera Assignment Settings] in
the Camera setting menu. ((P.81)
2
Select the item to set up.
I [REAR VIEW CAMERA]
The rear camera is always connected to the
rear view camera input terminals. This
setting cannot be changed.
I [FRONT VIEW CAMERA / DASH CAM]
Set the camera assignment from view
camera connected to Front view camera/
Dashboard camera input terminal.
I [3rd VIEW CAMERA]
Set the camera assignment from view
camera connected to 3rd view camera
input terminal.
I [VIDEO IN]
Set the camera assignment from view
camera connected to Video input terminal.
3
Select the view camera to set up.
1
3
2
4
Touch [Enter].
① Picture from view camera
Displays the picture from the view camera
connected to the input terminal to be set.
((P.128)
Other External Components
83
English
② Camera Position
Assign each position to the view camera
connected to the selected input terminal.
Front/Left/Right/Dashboard Camera/[None]
③ Mirroring setting *
1
Switch the mirroring setting.
[ON]/[OFF] (Default)
*1 The [FRONT VIEW CAMERA / DASH CAM] and
[3rd VIEW CAMERA] setting screens only.
NOTE
• The screen shot above is for the [FRONT VIEW
CAMERA / DASH CAM] setting screen. It may be
different from the ones for [3rd VIEW CAMERA] and
[VIDEO IN].
• The Dashboard Camera can be selected when it is
connected. ((P.128)
Ñ To adjust the parking guidelines
NOTE
• Install the rear view camera in the appropriate
position according to the instruction manual
supplied with the rear view camera.
• When adjusting the parking guidelines, make sure
to apply the parking brake to prevent the car from
moving.
1
Touch [Parking Guidelines] in the Camera
setting menu and set to [ON]. ((P.81)
2
Touch [Guidelines SETUP] in the Camera
setting menu.
3
Adjust the parking guidelines by selecting
the
mark.
4
Adjusting the position of the selected
mark.
A
B
C
D
Make sure that lines A and B are
horizontally parallel, and that lines C and D
are of the same length.
NOTE
• Touch [Initialize] and then touch [Yes] to set all the
marks to their initial default position.
Other External Components
84
Use Dashboard Camera
A Dashboard Camera, DRV-N520 (optional
accessory), connected to this unit lets you play
video-recorded data and so on.
For details, see the instruction manual of the
Dashboard Camera DRV-N520 (optional
accessory).
NOTE
• To connect a dashboard camera, see Connecting
the camera ( (P.128).
• To use the dashboard camera function, it is
necessary to set “Camera Assignment Settings” to
“Dashboard Camera”. ((P.82)
Ñ Display the dashboard camera
screen
1
DMX1058XR/DMX1038S/DAX1050XR
Press the [MENU/ATT] button.
DAX800XR/DAX8000S
Touch
at the top of the screen.
Popup menu appears.
2
Touch [Camera].
DMX1058XR/DMX1038S/DAX1050XR
DAX800XR/DAX8000S
1
3
2
① Camera Switching Keys
Touch to switch the view camera. It is necessary
to set “Camera Assignment Settings”
beforehand except “Rear”. See To set up the
camera assignment settings ( (P.82).
② Camera off
Touch to exit the camera screen.
③ Key display
Touch to display the dashboard camera control
keys.
Other External Components
85
English
External audio/video players
(AV-IN)
1
Connect an external component to the AV
Audio input and the Video input terminal.
((P.126)
2
Select [AV-IN] as the source. ((P.18)
3
Turn on the connected component and
start playing the source.
NOTE
• To select the AV-IN source, it is necessary to set
“VIDEO IN” to “None” in Camera Assignment
Settings. ((P.82)
HDMI source
1
Connect your smartphone to the HDMI
input terminal. ((P.126)
Use HDMI cable KCA-HD200 (optional
accessory).
2
Select [HDMI] as the source. ((P.18)
3
Start an application or playback on your
smartphone.
Other External Components
86
Maestro Features Operation
By connecting this unit to the bus system of the
vehicle using an iDatalink Maestro
(commercially available), this unit can access
OEM audio sources, vehicle settings, and show
vehicle information on this unit.
1
DMX1058XR/DMX1038S/DAX1050XR
Press the
HOME button.
DAX800XR/DAX8000S
Touch
at the top of the screen.
Touch
HOME on the popup menu.
HOME screen appears.
2
Touch
on the HOME screen.
3
Touch icon.
• Displays the control screen of the
Bluetooth Hands-Free function provided
for the vehicle.
• Displays the control screen of the
accessories in the vehicle.
• Displays vehicle information such as tire
pressure, battery voltage, check engine
codes. *
• Display and control the OEM satellite
radio.
• Display and control the OEM media
player.
• Displays the control screen of the
Bluetooth streaming source provided for
the vehicle.
• Display and controls the radar detector. *
• Displays information from the vehicle
data lines, such as speedometer and fuel
economy.
• Displays information about the status of
the climate control system in the vehicle.
*
• Displays information from the vehicle’s
parking sensors.
* These iDatalink Maestro features are displayed
as the widget on the Home screen. ((P.23)
You can display the relevant screens by
touching the widget.
NOTE
• Displayable screens, key names, and screen names
vary depending on the type of the connected
iDatalink Maestro and the model of the vehicle. For
more details, access the following URL:
https://www.idatalink.com/
Other External Components
87
English
Vehicle Status
Pitch and Roll
Displays the vehicle’s angle of pitch, angle of
roll, elevation, latitude and longitude, and
bearing (compass).
3
1
7
8
2
4
5 6
① Pitch display
Displays the numerical value
*1
and an image of
the angle of pitch.
② Roll display
Displays the numerical value
*1
and an image of
the angle of roll.
③ Compass display
Displays the direction the vehicle is facing. *
2
④ Elevation display
Displays the vehicle’s elevation. *
2
⑤ Latitude display
Displays the vehicle’s latitude. *
2
⑥ Longitude display
Displays the vehicle’s longitude. *
2
⑦ Gear position display
Displays the current gear (P, R, N, D, 3, 2, 1) *
1
*
3
⑧ Pitch and Roll Reset button
Resets the pitch and roll angle to 0. *
4
*1 Displays the value obtained from iDatalink
Maestro (commercially available).
*2 Displays the value obtained from the GPS.
*3 This feature is only available when the
iDatalink Maestro (commercially available) is
connected to a vehicle with automatic
transmissions.
*4 This is not displayed while Pitch/Roll data
from iDatalink Maestro is being notified.
Switching vehicle image
You can change the image displayed for the
vehicle.
Tap the image of the vehicle on the screen to
change the image.
• There are 6 vehicle images.
(sports car / station wagon / truck / sedan/
box car / SUV)
Vehicle Status
88
Setup
1
DMX1058XR/DMX1038S/DAX1050XR
Press the
HOME button.
DAX800XR/DAX8000S
Touch
at the top of the screen.
Touch
HOME on the popup menu.
HOME screen appears.
2
Touch
.
3
Touch [SETUP].
See the following section for each setting.
• Set up connection and AV ((P.89)
• Set up display and button ((P.91)
• Set up the user interface ((P.93)
• Set up camera ((P.81)
• Set up systems ((P.94)
Monitor Screen Setup
You can adjust the image quality of video,
menu screen, etc.
1
DMX1058XR/DMX1038S/DAX1050XR
Press the [MENU/ATT] button.
DAX800XR/DAX8000S
Touch
at the top of the screen.
Popup menu appears.
2
Touch [Screen Adjustment].
DMX1058XR/DMX1038S/DAX1050XR
DAX800XR/DAX8000S
Screen Adjustment screen appears.
3
Adjust each setting as follows.
I [Backlight] / [Contrast] / [Black] /
[Brightness] / [Color] / [Tint]
Adjust each setting.
I [Aspect]
Select a screen mode.
• “Full”: Changes the aspect ratio of video
and displays video fully on the screen.
• “Normal”: Displays video at the ratio of
4:3.
• “Auto”: USB device: Displays video fully
(vertically or horizontally) with no ratio
change.
NOTE
• Settings to adjust vary depending on the current
source.
Setup
89
English
Connection & AV Setup
You can set connection and AV parameters.
1
DMX1058XR/DMX1038S/DAX1050XR
Press the
HOME button.
DAX800XR/DAX8000S
Touch
at the top of the screen.
Touch
HOME on the popup menu.
HOME screen appears.
2
Touch
.
3
Touch [SETUP].
SETUP Menu screen appears.
4
Touch [Connection & AV].
Connection & AV setting menu appears.
5
Set each parameter as follows.
I [Bluetooth]
Turns the Bluetooth function on or off.
I [Device List]
Select the connected device to be used.
((P.70)
I [Device Name]
If you select [ON] for [Bluetooth], you can
change the Bluetooth device name. See
Change the device name ( (P.72).
I [PIN Code]
If you select [ON] for [Bluetooth], you can
change the PIN code.
See Change the PIN Code ( (P.72).
I [Device address]
Display the Bluetooth device address.
I [TEL SETUP]
You can make various settings for the
Hands-Free function.
See Hands-Free Setup ( (P.80).
I [Wi-Fi]
*1
Register the Wi-Fi access point to be used
for the Internet connection with SiriusXM
sources. ((P.48)
I [360L IP Connection]
*1
Make the settings for connecting to the
Internet with SiriusXM sources. ((P.48)
"ON"/"OFF" (Default)
• When set to “ON”, Apple CarPlay,
Android Auto and wireless mirroring
sources cannot be used.
I [Wireless Mirroring SSID]
You can change the SSID. See Change the
device name or Wireless Mirroring SSID
( (P.90).
I [Android Auto Auto Launch]
Select whether to display the Android Auto
screen automatically. Default is "ON".
I [Guidance/Voice Recognition Volume]
Adjust the volume of the guidance and
voice recognition in Apple CarPlay or
Android Auto mode. Default is "19".
I [Incoming Call Volume (Ring)]
Adjust the ring tone volume in Apple
CarPlay or Android Auto mode. Default is
"15".
I [In Call Volume (Talking)]
Adjust the dial tone volume and the
volume during a call in Apple CarPlay or
Android Auto mode. Default is "15".
I [Speech Quality Adjust]
Adjust the speech quality.
• [Microphone Level] : Adjust the level of
microphone gain. Default is “0”.
• [Echo Cancel Level] : Adjust the level of
echo cancellation. Default is “0”.
• [Noise Reduction Level] : Reduce the
noise generated in the surrounding
environment without changing the
microphone volume. Use this function
when the voice of caller is not clear.
Default is “0”.
• [Time Alignment] : (DMX1058XR/
DAX1050XR/DAX800XR only)
If the delay in the digital sound output is
disrupting the Echo Canceling of hands-
free sound, adjust the sound delay time.
Default is “20”.
This can be adjusted when the digital
sound output settings are on.
Setup
90
I [iPhone Bluetooth Connection]
See Select the method of making
connections for outputting sound from the
iPhone source ( (P.38).
I [Reverse with ATT]
Select whether to decrease the audio
volume automatically when the gear is
shifted to the reverse (R) position. Default is
"ON".
I [Reset Android Auto Wireless
Connection]
Regenerate a Pre-shared Key (PSK) to
connect wirelessly with Android Auto. A
confirmation dialog will appear because
the system needs to restart to regenerate a
PSK.
I [Built-In Amplifier]
Select whether to use the built-in power
amplifier.
Turning off the built-in amplifier improves
the quality of the sound from Preout.
“ON” (Default) / “OFF”
*1 This can be set when the SXV300 tuner (G2)
(sold separately) is connected.
Ñ Change the device name or
Wireless Mirroring SSID
1
DMX1058XR/DMX1038S/DAX1050XR
Press the
HOME button.
DAX800XR/DAX8000S
Touch
at the top of the screen.
Touch
HOME on the popup menu.
HOME screen appears.
2
Touch
.
3
Touch [SETUP].
SETUP Menu screen appears.
4
Touch [Device Name] / [Wireless Mirroring
SSID].
Change Device Name screen or Change
Wireless Mirroring SSID appears.
5
Input the device name or SSID.
6
Touch [Enter].
Setup
91
English
Display & Button Setup
1
DMX1058XR/DMX1038S/DAX1050XR
Press the
HOME button.
DAX800XR/DAX8000S
Touch
at the top of the screen.
Touch
HOME on the popup menu.
HOME screen appears.
2
Touch
.
3
Touch [SETUP].
SETUP Menu screen appears.
4
Touch [Display & Button].
Display & Button setting menu appears.
5
Set each parameter as follows.
I [Dimmer]
Select the dimmer mode.
• [OFF]: Does not dim the display and
buttons.
• [ON]: Dims the display and buttons.
• [SYNC] (Default): Turns the dimmer
function on or off when the vehicle light
control switch is turned on or off.
I [OSD Clock]
Select if you want to display the clock while
the screen is off, or while watching video
files on USB, etc.
"ON" (Default)/"OFF"
I [Button Illumination Color]
(DMX1058XR/DMX1038S/DAX1050XR
only)
You can set the button illumination color.
((P.91)
I [Wallpaper Customize]
You can change the wallpaper image or
color. ((P.92)
I [Clock Icon Selection]
Select the Clock Skin for the clock widget
on the HOME screen. ((P.93)
I [Viewing Angle]
If it is hard to see the image on the screen
evenly, adjust the viewing angle. The
smaller the (negative) value, the more
whitish the image on the screen looks.
"0" (Default)/"-1"/"-2"/"-3"
I [Screen transition effect]
Select whether to use the screen transition
effect when the source control screen is
switched to the Home screen.
"ON" (Default)/"OFF"
Ñ Customizing the button color
(DMX1058XR/DMX1038S/
DAX1050XR only)
You can set the button illumination color.
1
Touch [Button Illumination Color] in the
Display & Button setting menu.
2
Touch the desired color.
I [Variable]
You can set the button color to
continuously scan through the color
spectrum.
I [User]
You can set the color created with the RGB
color mixer.
I [Car Color]
This can be selected when the iDatalink
Maestro (commercially available) is
connected.
3
Touch
.
To register an original color
You can register your original color.
1
Touch [User] on the Button Illumination
Color screen.
Setup
92
2
Use [-] and [+] to adjust each color value.
3
Touch
.
NOTE
• You can create a color based on a preset color.
Touch the preset color instead of [User], and adjust
the color value.
Ñ Change the wallpaper image or
color
1
Touch [Wallpaper Customize] in the
Display & Button setting menu.
2
Select an image.
*1 *2 *3
*1 The album art currently being displayed is
used as a wallpaper.
*2 Select a wallpaper color in advance.
*3 Select an original image in advance.
To select wallpaper color
1
Touch [Wallpaper Color] on the Wallpaper
Customize screen.
2
Select a wallpaper color.
DMX1058XR/DMX1038S/DAX1050XR
DAX800XR/DAX8000S
I [User]
You can set the color created with the RGB
color mixer. For how to create an original
color, see To register an original color
( (P.91).
I [Car Color]
This can be selected when the iDatalink
Maestro (commercially available) is
connected.
I [Button Illumination Synch]
(DMX1058XR/DMX1038S/DAX1050XR
only)
The color you have selected at [Button
Illumination Color] can be set. If you adjust
the color value with the following RGB
color mixer, the adjusted color will be
applied to the wallpaper and the button
illumination.
For how to set the button illumination color
and create an original color, see
Customizing the button color ( (P.91).
“ON”/“OFF” (default)
• When [Button Illumination Color] is
“Variable”, this option is fixed to OFF.
3
Touch
.
Setup
93
English
To register an original image
With “KENWOOD Portal APP” application
installed on your iPhone or Android
smartphone, you can upload image files to this
unit and set an image as the wallpaper image.
See Importing Image Files ( (P.25).
Ñ Change the Clock Skin
1
Touch [Clock Icon Selection] in the Display
& Button setting menu.
2
Select an image.
User Interface Setup
You can setup user interface parameters.
1
DMX1058XR/DMX1038S/DAX1050XR
Press the
HOME button.
DAX800XR/DAX8000S
Touch
at the top of the screen.
Touch
HOME on the popup menu.
HOME screen appears.
2
Touch
.
3
Touch [SETUP].
SETUP Menu screen appears.
4
Touch [User Interface].
User Interface setting menu appears.
5
Set each parameter as follows.
I [Source Setup - Remote Control]
Select the sources to be switched with the
remote controller. For how to operate the
remote controller, see Remote control.
((P.108) ((P.112)
I [Beep]
*1
Turn the key touch tone on or off.
Default is “ON”.
I [Photo Frame Scroll]
Set the Photo Frame Scroll feature.
“ON“(default)/“OFF“
I [MENU Button Display] (DAX800XR/
DAX8000S only)
This sets whether or not the
button is displayed.
When this is set to OFF, operations are
carried out with the included remote
control.
“ON” (Default)/“OFF”
Setup
94
I [Parking Assist Display]
*2
When the iDatalink Maestro (commercially
available) is connected, you can display
information about obstacles around the
car.
• [ON]: Always displays information.
• [Dyn.] (Default): Displays information
when the sensor detects obstacles.
• [OFF]: Cancels this function.
I [Parking Assist Position]
*2
Select where to display information about
obstacles on the screen (left or right).
“Left”/“Right” (Default)
I [Android Auto Screen Size Switching]
Turn the Android Auto Split selection
feature on or off.
“ON“/“OFF“ (Default)
I [Driving Position]
Select the driving position (left or right).
“Left” (Default)/“Right”
*1 To use the function, it is necessary to set
[Fiber Optic Output] to [OFF], and to set
[X'over Network] to [2way].
*2 This can be set when the iDatalink Maestro
(commercially available) is connected.
System Setup
You can setup system parameters.
1
DMX1058XR/DMX1038S/DAX1050XR
Press the
HOME button.
DAX800XR/DAX8000S
Touch
at the top of the screen.
Touch
HOME on the popup menu.
HOME screen appears.
2
Touch
.
3
Touch [SETUP].
SETUP Menu screen appears.
4
Touch [System].
System setting menu appears.
5
Set each parameter as follows.
I [DEMO]
Select the demonstration mode. Default is
“ON”.
I [System Information]
Confirm the system information of this
unit. ((P.95)
I [Open Source Licenses]
Display the open source licenses.
I [Initialize]
Touch [Initialize] and then touch [Yes] to set
all the settings to the initial default settings.
• Audio SETUP Memory is not initialized.
I [Maestro SETUP]
Confirm the information about or change
the settings for using the iDatalink Maestro
(commercially available).
I [Vehicle Features]
This function requires a commercial
adaptor.
Consult your KENWOOD dealer for details.
I [Language Select]
Select a language.
Setup
95
English
I [Time Format]
I [Time Zone]
You can set the time. See Select the time
zone and time format ( (P.15).
Ñ System Information
You can confirm the software version of this
unit.
1
Touch [System Information] in the System
setting menu.
2
Verify the software version and model
name.
NOTE
• For how to update the software, see the relevant
update procedure manual which comes with the
software.
Setup
96
Controlling Audio
The [System Configuration] settings must
match the configuration of the connected
amplifiers and speakers. ((P.14)
. Using an amplifier with digital
inputs (DMX1058XR/
DAX1050XR/DAX800XR only)
When using an optical digital output, set the
output sampling frequency in [Fiber Optic
Output] to either 48 kHz or 96 kHz. ((P.14)
NOTE
• The bit count to 24-bit.
• If the digital output is set to 48 kHz or 96 kHz, the
following Audio settings will be disabled.
– Speaker / X’over
– EQ / SW Level
– Position / DTA
– Fader / Balance
– Sound Effect
– Parametric Equalizer
– Audio Memory
– 3Way X’over Network
– EQ settings widget on the HOME screen
– Beep for User Interface Setup
. Select the appropriate crossover
network mode for the speaker
system used (2-way or 3-way
speaker system)
# CAUTION
Connecting 3-way speakers with the 2-way
mode selected can break the speakers.
Set [X’over Network] to either 2-way or 3-way.
((P.15)
For the connection method, see 3-way speaker
system setup. ((P.126)
NOTE
• When the 3-way speaker system is selected, the
following functions are disabled.
– Fiber Optic Output
– Front focus of Listening Position / DTA
– Fader for Controlling General Audio
– Selection of the speakers to output sound from
the smartphone/cell-phone of Bluetooth HF/
Audio
– Beep for User Interface Setup
. Select whether to use the built-in
amplifier
Set the [Built-In Amplifier] to either ON or OFF.
((P.15) ((P.89)
Turning off the built-in amplifier improves the
quality of the sound from Preout.
Audio Setup
You can adjust various settings such as audio
balance or subwoofer level.
1
DMX1058XR/DMX1038S/DAX1050XR
Press the
HOME button.
DAX800XR/DAX8000S
Touch
at the top of the screen.
Touch
HOME on the popup menu.
HOME screen appears.
2
Touch
.
3
Touch [Audio].
See the following section for each setting.
• Set up Speaker / X’over ((P.97)
• Controlling EQ / SW Level ((P.99)
• Set Position / DTA ((P.100)
• Controlling Fader / Balance ((P.102)
• Set Volume Offset ((P.102)
Controlling Audio
97
English
• Set Sound Effect ((P.103)
• Use Audio Memory ((P.107)
NOTE
• When the iDatalink Maestro (commercially
available) is connected, the best audio settings are
set automatically.
Each parameter as follows are set.
– Speaker / X’over
– EQ / SW Level
– Position / DTA
– Fader / Balance
– Sound Effect
• To recall the settings automatically adjusted by the
iDatalink Maestro connection when the settings
are changed manually, touch [Audio SETUP Clear]
in the Audio Memory setting menu. ((P.107)
Speaker / X’over setup
1
DMX1058XR/DMX1038S/DAX1050XR
Press the
HOME button.
DAX800XR/DAX8000S
Touch
at the top of the screen.
Touch
HOME on the popup menu.
HOME screen appears.
2
Touch
.
3
Touch [Audio].
Audio screen appears.
4
Touch [Speaker / X’over].
5
Select a car type.
You can select the car type and speaker
network, etc.
When you select your car type, the Delay
Time Alignment is activated automatically
(for timing adjustment of sound output for
each channel) to have the highest surround
effects.
6
Touch the speaker (① ) you wish to
adjust and set each parameter (② ) as
follows.
1
2
2
I [Speaker]
You can select a speaker type and its size to
get the best sound effects.
If no rear speakers or subwoofer are
connected, select “None” for each.
Controlling Audio
98
When the speaker type and size are
selected, the speaker crossover network is
set automatically.
I [Location] (Only for Front, Rear)
Select the speaker position you have
installed.
I [Tweeter] (Only for Front)
You can set up the tweeter when you are
selecting front speakers.
None, Small, Medium, Large
I [HPF FREQ] (Only for Front, Rear)
High Pass Filter adjustment.
I [LPF FREQ] (Only for Subwoofer)
Low Pass Filter adjustment.
I [Slope]
Set a crossover slope.
I [Gain]
Adjust the gain of the front speaker, rear
speaker, or subwoofer.
I [TW Gain] (Only for Front)
Adjust the tweeter level.
I [Phase Inversion] (Only for Subwoofer)
Set the phase of subwoofer output.
Check [Phase Inversion] to shift the phase
180 degrees.
When Speaker network is set to 3-way:
1
2
2
I [Speaker]
You can select a speaker type and its size to
get the best sound effects.
When the speaker type and size are
selected, the speaker crossover network is
set automatically.
I [FREQ] (High Pass)
High Pass Filter adjustment. (Only for High
Pass)
I [FREQ] (Low Pass)
Low Pass Filter adjustment. (Only for Low
Pass)
I [HPF FREQ], [LPF FREQ] (Only for Band
Pass)
Band Pass Filter adjustment.
I [Slope]
*1
*2
Set a crossover slope.
I [Gain]
Set the gain of each speaker.
I [Phase Inversion]
Set the phase of tweeter, mid range, and
woofer output.
Check [Phase Inversion] to shift the phase
180 degrees.
*1 Only when “LPF FREQ”/“HPF FREQ” (Band
Pass) is set to a mode other than “Through”.
*2 Only when “FREQ” (Low Pass) is set to a mode
other than “Through”.
NOTE
• For how to switch to the 3-way speaker system,
see [X’over Network] in the System Configuration
settings. ((P.14)
Controlling Audio
99
English
Equalizer Control
You can adjust equalizer by selecting the
optimized setting for each category.
1
DMX1058XR/DMX1038S/DAX1050XR
Press the
HOME button.
DAX800XR/DAX8000S
Touch
at the top of the screen.
Touch
HOME on the popup menu.
HOME screen appears.
2
Touch
.
3
Touch [Audio].
Audio screen appears.
4
Touch [EQ / SW Level].
5
Touch the screen and set the Graphic
Equalizer as desired.
I Gain level (area in dotted frame)
Adjust the gain level by touching each
frequency bar.
You can select a frequency bar and adjust
its level by [R], [S].
I [ALL SRC]
Apply the adjusted equalizer curve to all
sources. Touch [ALL SRC] and then touch
[OK] on the confirmation screen.
I [Memory]
Saves the adjusted equalizer curve as
“User1” to “User4”. ((P.99)
I [Initialize]
Initialize (flatten) the current EQ curve.
I [Preset Select]
Display the screen for selecting the preset
equalizer curve. ((P.99)
I [Bass EXT] (Bass Extend Settings)
When turned on, the frequencies lower
than 62.5 Hz is set to the same gain level
(62.5 Hz).
I [SW Level]
Adjust the subwoofer volume. This setting
is not available when Subwoofer is set to
“None”. See Speaker / X’over setup ( (P.97).
Ñ Recall the EQ curve
1
Touch [Preset Select].
2
Select an EQ curve.
Ñ Save the EQ curve
1
Adjust the EQ curve.
2
Touch [Memory].
3
Select where to save.
Controlling Audio
100
Listening Position / DTA
Listening Position / DTA allows you to improve
the sound field depending on the position of
the seat you sit.
Listening Position / DTA allows you to set
“Listening Position” and “Front Focus”. You
cannot set both at the same time.
1
DMX1058XR/DMX1038S/DAX1050XR
Press the
HOME button.
DAX800XR/DAX8000S
Touch
at the top of the screen.
Touch
HOME on the popup menu.
HOME screen appears.
2
Touch
.
3
Touch [Audio].
Audio screen appears.
4
Touch [Position / DTA].
• Set up Listening Position ((P.100)
• Set up Front Focus ((P.101)
Ñ Listening Position
Adjust the sound delay time so that the sounds
from different speakers arrive at the listener
sitting on the selected seat at the same time.
1
Touch [Listening Position] on the
Position / DTA screen.
2
Select a listening position from [FrontR]
(Right front), [FrontL] (Left front),
[FrontAll] (All front), and [All].
Position DTA control
You can fine-adjust your listening position.
1
Touch [Adjust].
2
Touch [Delay].
3
Touch [T] or [U] to adjust the delay time
of the selected speaker.
4
Touch [Level].
5
Touch [T] or [U] to adjust the sound level
of the selected speaker.
NOTE
• To initialize the Delay and Level settings, touch
[Initialize] and [YES] on the confirmation screen.
Controlling Audio
101
English
Ñ Front Focus
You can focus the imaginary sound image on
the front of the selected seat.
1
Touch [Front Focus] in the Position / DTA
screen.
2
Select a front focus position.
For [Front All] and [All], select Priority L or R
depending on which side you want to put
the imaginary sound image.
NOTE
• When the 3-way speaker system is selected, front
focus feature is disabled.
Front Focus fine adjustment
1
Touch [Adjust].
2
Touch [Delay].
3
Set each parameter as follows.
I [Sound Image LR (Front)]
Focus the sound image on the front of front
seats.
I [Sound Image LR (Rear)]
Focus the sound image on the front of rear
seats.
I [Size of the Virtual Sound Field]
Adjust the size of sound image to meet
your taste. If the sound image is shifted
from the front, move it back by [Sound
Image LR (Front)] or [Sound Image LR
(Rear)].
I [Subwoofer Delay]
Adjust the delay time of subwoofer sound.
4
Touch [Level].
5
Touch [T] or [U] to adjust the sound level
of the selected speaker.
NOTE
• To initialize the Delay and Level settings, touch
[Initialize] and [YES] on the confirmation screen.
Controlling Audio
102
Fader / Balance
You can adjust the volume balance among the
speakers.
1
DMX1058XR/DMX1038S/DAX1050XR
Press the
HOME button.
DAX800XR/DAX8000S
Touch
at the top of the screen.
Touch
HOME on the popup menu.
HOME screen appears.
2
Touch
.
3
Touch [Audio].
Audio screen appears.
4
Touch [Fader / Balance ].
5
Touch [C], [D], [R], and [S] to adjust the
volume balance.
[C] and [D] adjust the left and right volume
balance.
[R] and [S] adjust the front and rear volume
balance.
I [Center]
Clear the adjustment.
NOTE
• When the 3-way speaker system is selected,
“Fader” adjustment is disabled.
Volume Offset
Finely adjust the volume of the current source
to minimize the difference in volume between
different sources.
1
DMX1058XR/DMX1038S/DAX1050XR
Press the
HOME button.
DAX800XR/DAX8000S
Touch
at the top of the screen.
Touch
HOME on the popup menu.
HOME screen appears.
2
Touch
.
3
Touch [Audio].
Audio screen appears.
4
Touch [Volume Offset].
5
Touch [+] or [-] to adjust the level.
I [Initialize]
Returns to the initial settings.
Touch [Initialize] and then touch [YES] on
the confirmation screen.
NOTE
• If you have increased the volume first, then reduce
the volume using “Volume Offset”. Switching the
current source to another source suddenly may
output extremely loud sound.
Controlling Audio
103
English
Sound Effect
You can set sound effects.
1
DMX1058XR/DMX1038S/DAX1050XR
Press the
HOME button.
DAX800XR/DAX8000S
Touch
at the top of the screen.
Touch
HOME on the popup menu.
HOME screen appears.
2
Touch
.
3
Touch [Audio].
Audio screen appears.
4
Touch [Sound Effect].
5
Set each parameter as follows.
I [Bass Boost]
Set the amount of bass boost
“OFF”/“1”/“2”/“3”.
I [Loudness]
Set the amount of boost of low and high
tones.
“OFF”, “Low”, “High”
I [Drive Equalizer]
Reduces the driving noise by raising the
bandwidth.
“OFF”, “ON”
I [Space Enhancer]
Select the feeling of sound space
enhancement.
“OFF”/“Small”/“Medium”/“Large”.
This setting is not available for the HD
Radio tuner source.
I [Supreme]
Turn ON/OFF the Supreme function.
Technology to extrapolate and supplement
with proprietary algorithm, the high-
frequency range that is cut off when
encoding.
I [Sound Realizer]
Virtually make the sound more realistic
using the Digital Signal Processor (DSP)
system.
Select the level from “OFF”/“1”/“2”/“3”.
I [Stage EQ]
You can adjust the height of speakers
virtually to suit your listening position.
“OFF”/“Low”/“Middle”/“High”.
I [Parametric EQ]
When set to “ON”, you can use the
parametric equalizer. For details, see
Parametric Equalizer ( (P.104).
Controlling Audio
104
Parametric Equalizer
In addition to the conventional Graphic
Equalizer, this unit has a parametric equalizer,
which allows you more precise adjustments. By
using each equalizer properly, you can calibrate
the unit more thoroughly.
Adjustment using this function requires
expertise.
When to Use Each Function
. Parametric Equalizer
Use this to finely correct or improve the
frequency characteristics of the acoustics of
the car in order to establish a basis for
adjustments.
Practiced ears or a measuring equipment
may be required to apprehend the problems
of the sound field inside the car.
. Graphic Equalizer
Use this to actively create an attractive sound
as conventionally.
Everybody can easily get the result through
trial and error of intuitive operations.
Even more effective adjustments are possible
when the basis is established by using the
Parametric Equalizer.
Ñ About the Parametric Equalizer
This system allows you to freely control the
filter, frequency, Q factor (acuteness) and slope
gain at 14 points consisting of 9 points common
for front/rear/subwoofer, 2 points for front only,
2 points for rear only, and one point for
subwoofer only.
NOTE
• Configure the Parametric Equalizer to establish the
basis for adjustments before making adjustments
using the Graphic Equalizer.
• The changes made using the Parametric Equalizer
are not shown on the Graphic Equalizer screen.
• You can check the effects using the Parametric
Equalizer ON/OFF key.
About Adjustments
If there are unpleasant peaks, you can slide the
peaking filter to the left or right and search the
frequencies by ear. Studio engineers use this
method to make adjustments quickly and
efficiently.
However, in order to identify peaks and dips of
a car audio system, you have to capture the
pink noise outputted from the speaker using a
microphone and analyze it using a real time
analyzer (RTA). From the analysis result, identify
the peaks and/or dips that need to be corrected
and configure the filters to cancel them.
About the Filters of Parametric Equalizer
Filters allow you to remove or extract specific
sound through signal processing.
Filter
NOTE
• Cutoff frequency is the boundary between the
passband and the stopband. The definition of
cutoff frequency is a frequency for which the
output is -3 dB of the nominal passband value.
. High-Pass Filter
Passes signals with frequencies higher than a
certain frequency (fc: cutoff frequency) and
attenuates signals with frequencies lower
than the cutoff frequency. Use this to pass
only high-frequency signals. Use this in the
following cases for example:
– For extracting the frequency band for
separate tweeters. By extracting the
specific frequency band, level adjustment
can be made to the frequency band
individually.
Controlling Audio
105
English
– The sound may be muddy when you play
back low frequency sound. This occurs
when frequencies below the speaker
capacity is inputted. To cancel this, use the
high-pass filter to cut off the frequencies
below the speaker capacity.
［dB］
［Hz］fc
. High-Shelving Filter/Low-Shelving Filter
These filters reduce or increase signals above
or below a certain frequency (fc: cutoff
frequency), which create shelves in the
frequency spectrums. A high-shelving filter
reduces or increases the frequencies above
the target frequency and a low-shelving filter
reduces or increases the frequencies below
the target frequency. The low shelf controls
the lower frequencies and the high shelf
controls the high frequencies. Use these in
the following cases for example:
– When you want to change the volume of
the tweeters, for example when they are
close to your ears and are sounding too
loud.
– When you want to change the subwoofer
volume at hand.
［dB］
［Hz］fc
. Peaking Filter
The frequencies in the vicinity of a certain
frequency (f0: center frequency) are boosted
or attenuated. Use this in the following cases
for example:
– When you want to control a narrow range
of frequencies to correct the frequency
abnormality in the car.
– To diminish a chattering noise from the
speaker by attenuating the frequency
range of the noise.
– To adjust of the sound balance of the
whole range between the low end and the
high end.
［dB］
［Hz］f0
. Low-Pass Filter
Passes signals with frequencies lower than a
certain frequency (fc: cutoff frequency) and
attenuates signals with frequencies higher
than the cutoff frequency. Use this to pass
only low-frequency signals. Use this in the
following cases for example:
– For extracting the low frequencies band
for a subwoofer.
– For extracting middle/low frequencies
when you are using speakers with separate
tweeters and you want to output the high
frequencies to the tweeters and output
the middle/low frequencies to the
woofers.
– To cut the high frequencies when they are
too loud.
［dB］
［Hz］fc
Ñ Adjust the Parametric Equalizer
Preparation
• Correct the value in “Listening Position” and “Front
Focus” before adjusting the parametric equalizer.
See Listening Position / DTA ( (P.100).
1
DMX1058XR/DMX1038S/DAX1050XR
Press the
HOME button.
DAX800XR/DAX8000S
Touch
at the top of the screen.
Touch
HOME on the popup menu.
HOME screen appears.
2
Touch
.
3
Touch [Audio].
4
Touch [Sound Effect].
Controlling Audio
106
5
Set the Parametric EQ to [ON] and touch
[Yes].
6
Touch [SETUP].
Parametric EQ screen appears.
7
While auditioning music, move the
peaking filter to the left and right to
search for unpleasant peaks and suppress
them.
8
Use pink noise and an analyzer to identify
dips, as dips are difficult to find.
Correct steep (10 dB or greater) peaks and
dips as these are generally regarded as
obstructions to sound quality.
9
Set each parameter as follows.
①
②
③
④
⑤
⑥
⑦
⑧
⑨
10
When you have finished adjustments,
save the results as a preset, and check the
effects by switching presets or turning the
Parametric EQ [ON] and [OFF].
11
Use the Graphic Equalizer to make final
adjustments. ((P.103)
① Speaker
Select the speaker.
• When Speaker network is set to 2-way:
“Common” / “Front” / “Rear” / “Subwoofer”
• When Speaker network is set to 3-way:
“Common” / “Tweeter” / “Middle” / “Woofer”
② EQ points/curve
Displays the EQ point and the curve. Adjust the
EQ points by touching.
• EQ point (red): The EQ point currently being
adjusted.
• EQ point (blue/yellow): EQ points that are
not currently being adjusted.
• Curve (orange): EQ curve of the speaker
currently being adjusted.
• Curve (blue): Overall EQ curve.
③ Filter
Select the filter.
“High Pass” / “High Shelving” / “Peaking” / “Low
Shelving” / “Low Pass”
④ Affects All Speakers
*1
• [ON]: Outputs sound from all speakers.
• [OFF]: Outputs sound from the currently
selected speaker only.
⑤ [Initialize] / [Flat]
• [Initialize]: Initialize (flatten) the adjustment
of all the speakers.
• [Flat]: Initialize (flatten) the adjustment of
the current speaker.
⑥ Frequency / Gain
Set the frequency and gain.
[T] and [U] adjust the frequency.
[R] and [S] adjust the gain.
NOTE
• Touch the EQ point to roughly determine the
frequency and gain, then use this key to make fine
adjustments.
⑦ Q / Slope
*2
Set the Q factor and slope.
⑧ Point
Select the EQ point to adjust.
⑨ Preset
• [User1] / [User2] / [User3]: Recalls the preset
EQ.
• [Memory]: Stores the current EQ settings.
*1 Only when the speaker other than “Common”
is selected.
*2 When “Peaking” filter is selected, you can
adjust the Q factor. When “High Pass” or “Low
Pass” filter is selected, you can adjust the
slope.
Controlling Audio
107
English
NOTE
• You can adjust the EQ points and curve based on a
preset EQ. Recall the preset EQ and touch the
preset key again to unselect it before adjustment.
Audio Setup memory
Audio Control settings can be memorized. The
memorized settings can be recalled at any time.
1
DMX1058XR/DMX1038S/DAX1050XR
Press the
HOME button.
DAX800XR/DAX8000S
Touch
at the top of the screen.
Touch
HOME on the popup menu.
HOME screen appears.
2
Touch
.
3
Touch [Audio].
Audio screen appears.
4
Touch [Audio Memory].
I [SETUP Memory]
Lock or unlock the Audio SETUP Memory/
Recall/Clear.
I [Audio SETUP Memory]
Memorize the current audio settings.
Fader / Balance, Speaker / X’over, Equalizer
(User Preset, SW Level), Position / DTA,
Sound Effect ((P.96)
I [Audio SETUP Recall]
Recall the memorized audio setting.
I [Audio SETUP Clear]
Clear the Audio SETUP Memory and the
currently memorized audio settings.
If the iDatalink Maestro (commercially
available) is connected, the audio settings
revert to the values set by the iDatalink
Maestro.
Controlling Audio
108
Remote control (accessory)
DAX800XR/DAX8000S
This unit can be operated using the remote
control. (RC-DV240).
# WARNING
• Do not ingest the battery, Chemical Burn
Hazard
The remote control supplied with this
product contains a coin/button cell battery. If
the coin/button cell battery is swallowed, it
can cause severe internal burns in just 2
hours and can lead to death.
• Keep new and used batteries away from
children. If the battery compartment does
not close securely, stop using the product
and keep it away from children.
• If you think batteries might have been
swallowed or placed inside any part of the
body, seek immediate medical attention.
# CAUTION
• Risk of fire or explosion if the battery is
replaced by an incorrect type. Ensure to
replace only with the same type.
• Risk of fire, explosion or the leakage of
flammable liquid or gas if the battery is left in
an extremely high temperature surrounding
environment and/or subjected extremely low
air pressure. The battery pack or batteries
shall not be exposed to excessive heat such
as sunshine, fire or the like.
• Risk of fire, explosion or the leakage of
flammable liquid or gas if the battery is
disposed into fire or a hot oven, recharged,
shorted, mechanically crushed or cut of the
battery.
• If spilled fluid comes in contact with your
eyes or on clothing, immediately rinse with
water and consult a physician.
Battery Installation
Preparing the remote control unit
Pull the battery sheet out from the remote
control unit to the direction of the arrow.
Changing the battery of the remote
control unit
CR2025 (+ side)
Keep on slide
Pull out
• Use a commercially available button battery
(CR2025).
• Insert the battery with the + and – poles
aligned properly.
– If the effectiveness of the remote
controller decreases, replace the battery.
Remote control (accessory)
109
English
Functions of the Remote
control Buttons
Key
Name
Function
SRC Switches to the source to be played.
In Hands-Free mode, hangs up the
phone.
VOL RS
Adjusts the volume.
ATT Lowers the volume when pressed once.
Restores the previous volume when
pressed twice.
DISP Switches the screen between the
current source and the App screen from
the connected iPhone or Android.
FM/R
AM/S
Selects the folder to be played.
For the HD Radio source, selects FM/AM
band to be received.
Not used for the SiriusXM source.
E 2
F 3
Selects the track or file to be played.
For the HD Radio and SiriusXM sources,
switches to broadcast stations received
by the unit.
K
Pauses the track or file, and resumes
playing by pressing twice.
For the HD Radio sources, switches the
seek mode.
Not used for the SiriusXM source.
MENU Displays the popup menu screen.
VOICE • Switches the voice recognition
function on. ((P.28) ((P.31) ((P.77)
• When neither Apple CarPlay, Android
Auto, nor a Bluetooth Hands-Free
phone is connected, pressing and
holding displays Bluetooth pairing
waiting dialog. ((P.69)
Key
Name
Function
DIRECT Switches to the direct search mode.
For details on the direct search mode,
see Direct search mode ( (P.109).
ASPECT Changes the aspect ratio.
To confirm the current aspect ratio
setting, operate on the touch panel.
((P.88)
Numeric
Keypad
• Allows you to enter the number to
search in the direct search mode.
For details on the direct search
mode, see Direct search mode
( (P.109).
• For the HD Radio and SiriusXM
sources, allows you to enter the
preset number.
– If the preset number is single digit,
press the number.
– If the preset number is double
digits, press continuously the
numbers within 3 seconds.
– Pressing [E] or [F] within 3
seconds allows you to determine
the preset number of single digit.
Û
When a call comes in, answers the call.
Ý
When a call comes in, refuses the call.
During a call, hangs up.
Ñ Direct search mode
Using the remote control, you can jump directly
to the desired frequency value of the Radio
source by entering the number corresponding
to the content.
NOTE
• This operation cannot be performed for the USB
device and iPhone.
1
Press the [DIRECT] button several times
until the desired content appears.
The available contents are different
depending on the source type.
I HD Radio tuner
Frequency value/Channel number
I SiriusXM
Channel number
2
Enter the number of the content you want
to play using the numeric keypad.
Remote control (accessory)
110
3
Press the E or F button.
The content corresponding to the number
you entered is played.
Remote control (accessory)
111
English
Caution for button or coin batteries:
This symbol on the product means there are important operating and
maintenance instructions in this manual.
Be sure to carefully read instructions in this manual.
This symbol means that a button cell or coin battery is contained.
#WARNING
• INGESTION HAZARD: This product contains a button cell
or coin battery.
• DEATH or serious injury can occur if ingested.
• A swallowed button cell or coin battery can cause
Internal Chemical Burns in as little as 2 hours.
• KEEP new and used batteries OUT OF REACH of
CHILDREN
• Seek immediate medical attention if a battery is
suspected to be swallowed or inserted inside any part of
the body.
• Remove and immediately recycle or dispose of used batteries according to local regulations and
keep away from children. Do NOT dispose of batteries in household trash or incinerate.
• Even used batteries may cause severe injury or death.
• Call a local poison control center for treatment information.
• Battery type: CR2025
• Nominal voltage: DC3V
• Non-rechargeable batteries are not to be recharged.
• Do not force discharge, recharge, disassemble, heat above 212°F (100°C) or incinerate. Doing so
may result in injury due to venting, leakage or explosion resulting in chemical burns.
• Ensure the batteries are installed correctly according to polarity (+ and -).
• Do not mix old and new batteries, different brands or types of batteries, such as alkaline, carbon-
zinc, or rechargeable batteries.
• Remove and immediately recycle or dispose of batteries from equipment not used for an
extended period of time according to local regulations.
• Always completely secure the battery compartment. If the battery compartment does not close
securely, stop using the product, remove the batteries, and keep them away from children.
Remote control (accessory)
112
Remote control (optional)
DMX1058XR/DMX1038S/
DAX1050XR
This unit can be operated using the remote
control KCA-RCDV340 (optional accessory).
# CAUTION
• Put the remote control in a place where it will
not move during braking or other operations.
A dangerous situation could result, if the
remote control falls down and gets wedged
under the pedals while driving.
• Risk of fire or explosion if the battery is
replaced by an incorrect type.
• Ensure to replace only with the same type.
• Risk of fire, explosion or the leakage of
flammable liquid or gas if the battery is left in
an extremely high temperature surrounding
environment and/or subjected extremely low
air pressure. The battery pack or batteries
shall not be exposed to excessive heat such
as sunshine, fire or the like.
• Risk of fire, explosion or the leakage of
flammable liquid or gas if the battery is
disposed into fire or a hot oven, recharged,
shorted, mechanically crushed or cut of the
battery.
• If spilled fluid comes in contact with your
eyes or on clothing, immediately rinse with
water and consult a physician.
Battery Installation
If the remote control operates only over shorter
distances or does not operate at all, it is possible
that the batteries are depleted.
In such instances, replace the both batteries
with new ones.
1
Insert two “AAA”/“R03”-size batteries with
the ¢ and ¤ poles aligned properly,
following the illustration inside the case.
Remote control (optional)
113
English
Functions of the Remote
control Buttons
Ñ Switch the operation mode
The functions operated from the remote control
differ depending on the position of the mode
switch.
V.SEL
MENU
ENTER
MODE FNC/PBC
DVD
•
T V
•
AUD
•
DISP
AUDIO ANGLE
OPEN
VOL
FM
+
AM
−
ZOOM
RETURN
SRC
38 7
∞
∞
∞
∞
∞
TOP MENU
DVD SETUP
SUBTITLE
DVD
•
T V
•
AUD
•
I AUD mode
Switch to this mode when controlling a
selected source or tuner source, etc.
I DVD mode/TV mode
Not used.
NOTE
• When controlling a player that is not integrated in
the unit, select “AUD” mode.
Ñ Direct search mode
Using the remote control, you can jump directly
to the desired frequency value of the Radio
source by entering the number corresponding
to the content.
NOTE
• This operation cannot be performed for the USB
device and iPhone.
1
Press the [DIRECT] button several times
until the desired content appears.
The available contents are different
depending on the source type.
I HD Radio tuner
Frequency value/Channel number
I SiriusXM
Channel number
2
Enter the number of the content you want
to play using the numeric keypad.
3
Press the E or F button.
The content corresponding to the number
you entered is played.
Remote control (optional)
114
Ñ Basic Operation
Key
Name
Mode
switch
Function
1 SRC − Switches to the source to be played. In Hands-Free mode, hangs up the phone.
2
I
− Not used.
3
L
− Pauses the track or file, and resumes playing by pressing twice.
For HD Radio sources in AUD mode, switches the seek mode.
Not used for the SiriusXM source.
4
R/S/C/D
− Not used.
5 ENTER − Performs the selected function.
6 TOP MENU AUD Screen mode changes each time you press this key during video playback.
7 MENU AUD Displays the control screen of current source. (USB)
8 OPEN − Not used.
9 AM–/FM+ AUD Selects the folder to be played. For the HD Radio sources in AUD mode, selects
FM/AM band to be received.
Not used for the SiriusXM source.
10
E/F
− Selects the track or file to be played. For the HD Radio and SiriusXM sources in
AUD mode, switches to broadcast stations received by the unit.
Remote control (optional)
115
English
Key
Name
Mode
switch
Function
11 Numeric
Keypad
AUD Allows you to enter the number to search in the direct search mode.
For details on the direct search mode, see Direct search mode ( (P.113).
For the HD Radio and SiriusXM sources, allows you to enter the preset number.
If the preset number is one digit, press the number.
If the preset numbers is two digits, press continuously the numbers within 3
seconds.
Pressing E F within 3 seconds allows you to determine the preset number
of one digit.
12 CLEAR − Not used.
13 DIRECT −
Switches to the direct search mode. ((P.113).
14 AUDIO − Not used.
15 RETURN − Not used.
16 SUBTITLE − Not used.
17 − When a call comes in, answers the call.
18 ANGLE − Not used.
19
VOL RS
− Adjusts the volume.
20 ZOOM − Not used.
21 2 ZONE − Not used.
22
R.VOL 32
− Not used.
23 ATT − Lowers the volume by pressing the key once.
Restores the previous volume by pressing the key twice.
24 V.SEL/DISP − Switches between the Apple CarPlay, Android Auto, Wireless mirroring and AV
source screen each time it is pressed.
25 DVD SETUP − Not used.
Remote control (optional)
116
Connection/Installation
This section is for the professional installer.
For safety’s sake, leave wiring and mounting to
professionals. Consult the car audio dealer.
Before Installation
Before installation of this unit, please note the
following precautions.
# WARNINGS
• If you connect the ignition wire (red) and the
battery wire (yellow) to the car chassis
(ground), you may cause a short circuit, that
in turn may start a fire. Always connect those
wires to the power source running through
the fuse box.
• Do not cut out the fuse from the ignition wire
(red) and the battery wire (yellow). The
power supply must be connected to the
wires via the fuse.
# CAUTION
• Install this unit in the console of your vehicle.
• Do not touch the metal part of this unit
during and shortly after the use of the unit.
Metal part such as the heat sink and
enclosure become hot.
NOTE
• Mounting and wiring this product requires
skills and experience. For best safety, leave
the mounting and wiring work to
professionals.
• Do not install the unit if it becomes an
obstacle to driver performance.
• Adjust the panel position not to become an
obstacle to driver performance.
• Make sure to ground the unit to a negative
12V DC power supply.
• Do not install the unit in a spot exposed to
direct sunlight or excessive heat or humidity.
Also avoid places with too much dust or the
possibility of water splashing.
• Do not use your own screws. Use only the
screws provided. If you use the wrong
screws, you could damage the unit.
• If the power is not turned ON (“There is an
error in the speaker wiring. Please check the
connections.” is displayed), the speaker wire
may have a short-circuit or touched the
chassis of the vehicle and the protection
function may have been activated. Therefore,
the speaker wire should be checked.
• If your car’s ignition does not have an ACC
position, connect the ignition wires to a
power source that can be turned on and off
with the ignition key. If you connect the
ignition wire to a power source with a
constant voltage supply, such as with battery
wires, the battery may be drained.
• If the console has a lid, the lid will not be
closed even when the unit is installed
correctly.
• If the fuse blows, first make sure the wires are
not touching to cause a short circuit, then
replace the old fuse with one with the same
rating.
• Insulate unconnected wires with vinyl tape or
other similar material. To prevent a short
circuit, do not remove the caps on the ends
of the unconnected wires or the terminals.
• Connect the speaker wires correctly to the
terminals to which they correspond. The unit
may be damaged or fail to work if you share
the ¤ wires or ground them to any metal
part in the car.
• When only two speakers are being
connected to the system, connect the
connectors either to both the front output
terminals or to both the rear output terminals
(do not mix front and rear). For example, if
you connect the ¢ connector of the left
speaker to a front output terminal, do not
connect the ¤ connector to a rear output
terminal.
• After the unit is installed, check whether the
brake lamps, blinkers, wipers, etc. on the car
are working properly.
• This unit has the cooling fan to decrease the
internal temperature. Do not mount the unit
in a place where the cooling fan of the unit is
blocked. Blocking these openings will inhibit
the cooling of the internal temperature and
result in malfunction.
Connection/Installation
117
English
Cooling fan
• Do not press hard on the panel surface when
installing the unit to the vehicle. Otherwise
scars, damage, or failure may result.
• Reception may drop if there are metal
objects near the Bluetooth/Wi-Fi antenna.
DMX1058XR/DMX1038S
Bluetooth/Wi-Fi antenna unit
DAX1050XR/DAX800XR/DAX8000S
Bluetooth/Wi-Fi antenna unit
. Forward and Lateral Fields of
Vision
• To determine driver’s forward and lateral
fields of vision under normal conditions,
place a pole (directly visible from the front or
visible through the car rear-view mirror) as
shown.
0.3m
0.3m
0.3m
2m 2m
*1 *2
0.9m0.7m1m
– : Pole (height: 1m, diameter: 0.3m)
–
: Field of vision from steering position
–
: Exempted area (pole size is subject to
regulation)
• For right hand drive vehicles, standards are
reversed.
*1 The pole must be visible from the driver's
position as direct forward field of vision.
*2 The pole must be directly visible or indirectly
visible through the mirror, etc. from the
driver's position.
Ñ Supplied accessories for
installation
①
*1
×1
②
(1 m)
×1
③
(3 m)
×1
④
(M5 x 8 mm)
*1
×4
⑤
(M5 x 8 mm)
*1
×4
⑥
(3.5 m)
×1
⑦
×1
⑧
*1*2
*3
×1
⑨
(M4 x 12 mm)
*1*2
×4
⑩
(Ø3 x 6 mm)
(Black)
×3
*1*2
×1
*3
⑪
(M4 x 8 mm)
(Black)
*1
×5
Connection/Installation
118
⑫
*1
*2
×1
⑬
×1
⑭
×1
⑮
×1
⑯
(1.5 m)
*3
×1
*1 DMX1058XR/DMX1038S only
*2 DAX1050XR only
*3 DAX800XR/DAX8000S only
Ñ Installation procedure
1. To prevent a short circuit, remove the key
from the ignition and disconnect the ¤
terminal of the battery.
2. Remove the vehicle parts for installing the
unit and connecting wires to terminal.
3. Make the proper input and output wire
connections for each unit.
4. Connect the speaker wires of the wiring
harness.
5. Connect the wiring harness wires in the
following order; ground, battery, ignition.
6. Determine the height of the display unit and
position of the slider. See Distance between
the display unit and the main unit ( (P.120).
7. Connect the wiring harness connector to the
unit.
8. Install the main unit to the vehicle.
9. Reinstall the vehicle parts.
10. Install the display unit.
11. Reconnect the ¤ terminal of the battery.
12. Perform the Initial Setup.
See Initial SETUP ( (P.14).
Installing the accessories
Ñ GPS antenna
GPS antenna is installed inside of the car. It
should be installed as horizontally as possible to
allow easy reception of the GPS satellite signals.
To mount the GPS antenna inside your vehicle:
1. Clean your dashboard or other surface.
2. Remove the separator of the metal plate
(accessory ⑦ ).
3. Press the metal plate (accessory ⑦ ) down
firmly on your dashboard or other mounting
surface. You can bend the metal plate
(accessory ⑦ ) to conform to a curved
surface, if necessary.
4. Remove the separator of the GPS antenna
(accessory ⑥ ), and stick the antenna to the
metal plate (accessory ⑦ ).
⑥
⑦
NOTE
• Use the supplied GPS antenna. Using the GPS
antenna other than the supplied one may cause a
drop in positioning accuracy.
• Depending on the type of car, reception of the
GPS satellite signals might not be possible with an
inside installation.
• Please install this GPS antenna in an area away
from any antennas that are used with CB radios or
satellite televisions.
• The GPS antenna should be installed at a position
that is spaced at least 12 inch (30 cm) from
smartphone/cell-phone or other transmitting
antennas. Signals from the GPS satellite may be
interfered with by these types of communication.
• Painting the GPS antenna with (metallic) paint may
cause a drop in performance.
Ñ Microphone unit
1. Check the installation position of the
microphone (accessory ③ ).
2. Clean the installation surface.
3. Remove the separator of the microphone
(accessory ③ ), and stick the microphone to
the place shown below.
Connection/Installation
119
English
4. Wire the microphone cable up to the unit
with it secured at several positions using
tape or other desired method.
5. Adjust the direction of the microphone
(accessory ③ ) to the driver.
③
Fix a cable with a commercial item of tape.
Connection/Installation
120
Installing the Big Screen model
DMX1058XR/DMX1038S/DAX1050XR
Ñ Confirm the installing position of the display unit
. Vehicles cannot be installed
It may be possible to install if it can avoid the following by adjustment for slider position and display
height.
Lever operations are interfered such as shift lever,
wiper lever, winker lever when install the unit.
A hazard switch is hidden from a
driver seat.
The display unit hits a panel
on the vehicle.
30mm*
1
*1 The Display unit can move 30 mm to the left or right. It can be installed if it doesn't interfere with
lever operation when moving.
. Distance between the display unit and the main unit
Adjust slider position and display height so that it does not interfere with display movement.
Slider
position
Display angle
-10° 0° 45°
Back position
1
2
3
4
b
a
a b
1
2
3
4
a
b
a b
1
2
3
4
d
c
c d
1 10.8 126.5 1 30.0 123.6 1 25.6 30.5
2 13.4 111.8 2 108.6 2 15.0 41.1
3 16.0 97.2 3 93.6 3 4.4 51.7
4 18.6 82.4 4 78.6 4 -6.2 62.3
Forward position
1
2
3
4
b
a
a b
1
2
3
4
a
b
a b
1
2
3
4
d
c
c d
1 29.8 126.5 1 49.0 123.6 1 44.6 30.5
2 32.4 111.8 2 108.6 2 34.0 41.1
3 35.0 97.2 3 93.6 3 23.4 51.7
4 37.6 82.4 4 78.6 4 12.8 62.3
Unit: mm
. Main unit allowable installation angles
Installed horizontally
±5°
±5°
0° – 40°
[F]
Installed vertically
±5°
±5°
±20°
[F]
To install with the main unit separated from
the display unit
• Depending on how the main unit is oriented,
[Installation Orientation] may require
configuring. ((P.14)
• The KCA-A150EX extension cable (150 cm / 4.9
ft, sold separately) is required to connect the
display unit (accessory ⑧ ).
• [F] : Front side of the vehicle
• Pitch : 0° – 40° (horizontally), ±20° (vertically)
• Roll/Yaw : ±5°
Connection/Installation
121
English
Ñ Positioning the slider in forward
(DMX1058XR/DMX1038S only)
1
Remove the two screws from the top of
the main unit.
Screw
Main unit
2
Remove the four screws from the bottom
of the main unit.
Main unit
Screw
3
Pull the slider block forward and reinstall
the four screws to the bottom of the main
unit.
Slider
Screw
(Recommended
torque 1.5±0.15
N·m)
4
Reinstall the two screws from the top of
the main unit.
Slider
Screw (Recommended
torque 1.5±0.15 N·m)
Ñ Installing the main unit
(DMX1058XR/DMX1038S only)
NOTE
• Determine the slider position before installing the
main unit. ((P.121) The slider position cannot be
changed after installing to the vehicle.
• Make sure that the unit is installed securely in
place. If the unit is unstable, it may malfunction.
1
Remove parts that interfere with
installing such as a panel on the vehicle.
2
Install the car bracket to the main unit.
Car bracket
Main unit
④
/
⑤
④
/
⑤
3
Connect the wiring harness wires and
peripheral equipment.
4
Install the main unit to the vehicle.
5
Reinstall the removed parts such as a
panel on the vehicle.
Panel on the
vehicle
Main unit
Ñ Installing the arm bracket for
the display unit
(DMX1058XR/DMX1038S only)
1
Match the arm bracket (accessory ⑫ )
installation position to align with the
length of the display cable.
Power cable for Display : about 170 mm
(6-11/16”)
Video cable for Display : about 160 mm
(6-5/16”)
Power cable for
Display
170mm
160mm
Video cable for
Display
Installation position
Connection/Installation
122
2
Positioning the arm bracket (accessory
⑫ ).
When installing the arm bracket in the left or
right position, move the display cable so that
it aligns with the groove in the arm bracket.
Center position
⑫
Left position
⑫
Right position
⑫
3
Fix the arm bracket (accessory ⑫ ) to the
main unit with the five binding head
screws (accessory ⑪ ).
Projection
⑫
Main unit
(Recommended
torque 1.5±0.15
N·m)
⑪
Ñ Installing the display unit and
adjusting the height
1
Remove the rear cover from the display
unit (accessory ⑧ ).
Slide the rear cover on the display unit
(accessory ⑧ ) over and lift it up.
Rear cover
⑧
2
Connect the Video cable for Display (① )
and Power cable for Display (② ).
1
2
3
Run the display cables.
Use the guides to secure the Video cable for
Display (① ) in place.
Run the display cables along the interior
guide path (between the posts). Install it so
that the display unit has room to move. Tuck
the remaining display cables inside the main
unit.
Guides
Guides
4
Install the display unit (accessory ⑧ ) to
the main unit.
Install the unit so that the hooks on the
display unit (accessory ⑧ ) are inserted into
the groove on the arm bracket.
Main unit
⑧
Connection/Installation
123
English
5
Adjust the display height according to the
screw hole position.
Screw hole position
1
2
3
4
6
Fix the display unit with four hexagon
head screws (accessory ⑨ ).
⑨
⑨
NOTE
• Fix with hexagon head screws correctly. After
installing the display unit (accessory ⑧ ) to the
main unit, tilt the display forward until it stops and
confirm that the display unit (accessory ⑧ ) does
not hit vehicle parts. If the display unit hits vehicle
parts, adjust the display height again.
7
Adjust the length of the display cable to
align with the height of the display unit.
Install it so that the display unit has room to
move. Tuck the remaining display cable
inside the main unit.
8
Attach the rear cover of the display unit.
Insert the hooks on the rear cover into the
grooves on the display unit. Slide it along the
main unit until you hear a click.
Main unit
Hooks
Rear cover
9
Fix the display unit cover with two
binding head screws (accessory ⑩ ).
⑩
⑩
10
Raise the display manually.
Ñ Removing the display cable
# CAUTION
• To prevent injuries to your hands and
damage to the display cable, cover the metal
parts with protective tape before working.
• Do not disconnect cables while the unit’s
power is on. Doing so could cause damage.
1
Apply protective tape so that it covers the
metal parts in the shaded area in the
image.
1
2
Lock
Cover with
protective tape
2
Press and hold the display cable lock and
then remove the cable.
Disconnect the Power cable for Display (① )
and Video cable for Display (② ).
Connection/Installation
124
Installing the Separate model
DAX1050XR/DAX800XR/DAX8000S
Preparation
• You may need the ADS installation kit to
align with the installation vehicle.
Link: https://www.idatalinkmaestro.com
• See the instruction manual included with the
installation kit for how to install.
NOTE
• Be sure to install using the ADS installation kit. The
unit may not operate properly if the installation kit
is not used.
Installation overview
Main unit *1*3
(Installed vertically)
Main unit *1*4
(Installed vertically)
⑧
⑯
Main unit *1
(Installed horizontally)
Display cable *2
*3
*1 Depending on how the main unit is oriented,
[Installation Orientation] may require
configuring. ((P.14)
*2 Connect the main unit display cable (65 cm /
2.1 ft.) to the display unit (accessory ⑧ ). If the
display cable does not reach, you will need
the extension cable KCA-A150EX (150 cm /
4.9 ft, sold separately).
*3 DAX800XR/DAX8000S only.
*4 DAX1050XR only.
Installing the remote control sensor
(DAX800XR/DAX8000S only)
1. Confirm the installation location for the
remote control sensor (accessory ⑯ ).
2. Clean the surface of the installation location.
3. Remove the separator on the remote control
sensor (accessory ⑯ ) and attach the light
receptor.
4. Use tape to secure the remote control
sensor cable at several locations and run it
to the display unit (accessory ⑧ ).
NOTE
• Take note of the following precautions when
installing the remote control sensor (accessory ⑯ ).
– Install in a location that can easily receive the
infrared signals from the remote control.
– Select a location where double-sided tape can
be used to secure the sensor.
Main unit allowable installation angles
• Installed horizontally
c
a
b
5
6
2
3
4
1
• Installed vertically
c
a
5
*1
2
3
4
b
1
c
c
a
b
5
6
2
1
3
4
6
DAX1050XR
DAX800XR/DAX8000S
Installed
horizontally
Installed
vertically
a
Yaw ±5° ±5°
b
Pitch 0° – 40° ±20°
c
Roll ±5° ±5°
1 Front side of the vehicle
2 Top side
3 Left side
4 Cluster panel side (inside the vehicle
interior)
5 Display cable
6 Model name plate
*1 When installing the DAX1050XR, orient the
face with the model number towards the
front of the vehicle.
Connection/Installation
125
English
Connecting the unit
Ñ Connecting wires to terminals
ILLUMI
ANT CONT
STEERING WHEEL
REMOTE INPUT
REMOTE CONT
PRK SW
REVERSE
P. CONT
CAM+
CAM–
S SENS
Fuse (15A)
Other cable : Not used.
White
White/Black
Gray
Gray/Black
Green
Green/Black
Purple
Purple/Black
To front left speaker
To front right speaker
To rear left speaker
To rear right speaker
Speaker impedance: 4-8 Ω
If no connections are made, do not let the
cable come out from the tab.
Blue/White
(Power control wire)
When using the optional power amplifier,
connect to its power control terminal. (Max.
200mA, 12V)
Light Blue/Yellow
(Steering remote control wire)
To steering remote
To use the steering wheel remote control
feature, you need an exclusive remote
adapter (not supplied) matched to your car.
Orange/White
(Dimmer control wire)
To car light control switch
Blue
(Antenna control wire)
Depending on what antenna you are using,
connect either to the control terminal of the
motor antenna, or to the power terminal for the
booster amplifier of the film-type antenna. (Max.
300mA, 12V)
Connect to vehicle’s reverse lamp harness when using the
optional rear view camera.
Purple/White (Reverse sensor wire) (2 m)
Connect to the vehicle’s speed pulse harness.
Do not cut the "S SENS" tag or failure may result.
Pink (Speed Pulse Input) (2m)
To CMOS-3xx series (optional accessory)
camera control terminal
Green/Red
Green/White
Black
(Ground wire)
(To car chassis)
Battery
Car fuse box
Yellow
(Battery wire)
Red
(Ignition wire)
Ignition key switch
Light Green
(Parking sensor wire)
(2 m)
For best safety, be sure to connect the
parking sensor.
Connect to the vehicle’s
parking brake detection
switch harness.
①
Connection/Installation
126
Ñ 3-way speaker system setup
+
+
+
+
FRONT REAR
SUB
WOOFER
Purple/Black
Purple
Green/Black
Green
Gray/Black
Gray
White/Black
White
To mid range left
speaker
To mid range right
speaker
To tweeter left
speaker
To tweeter right
speaker
Speaker impedance: 4-8 Ω
①
⑬
Mid Range Preout
(Left ; White, Right ; Red)
Tweeter Preout
(Left ; White, Right ; Red)
Subwoofer Preout
(Left ; White, Right ; Red)
NOTE
• When connecting to an external amplifier, connect
its ground wire to the car’s chassis to avoid
damaging the unit.
• For how to switch to the 3-way speaker system,
see [X’over Network] in the System Configuration
settings. ((P.14)
• For speaker setup and crossover setup, see
Speaker / X’over setup ( (P.97).
• For how to connect speaker wires to terminals
other than speaker terminals and Preout terminals,
see Connecting the external amplifiers and
external AV device ( (P.126) and Connecting
wires to terminals ( (P.125).
• When not using the Preout (RCA terminals), keep
the terminal caps on.
Ñ Connecting the external
amplifiers and external AV
device
AUDIO IN FRONT REAR
SUB
WOOFER
VIDEO INVIDEO OUT
⑬
AV Audio input *2
(Left; White, Right; Red)
Front Audio Preout
(Left; White, Right; Red)
Rear Audio Preout
(Left; White, Right; Red)
Subwoofer Preout
(Left; White, Right; Red)
⑭
To digital input amplifier *4
Video output (Yellow)
Video input (Yellow) *2
Ground wire
*1
Optical digital audio
cable *3 *4
*1 Secure the two ground wires together to the
chassis of the main unit.
*2 Set “VIDEO IN” to “None” in Camera
Assignment Settings. ((P.82)
*3 Sold separately.
Check the specifications for the optical digital
audio cable and follow the minimum
bending radius when running the wires.
*4 DMX1058XR/DAX1050XR/DAX800XR only
NOTE
• When connecting to an external amplifier, connect
its ground wire to the car’s chassis to avoid
damaging the unit.
• When not using the Preout (RCA terminals), keep
the terminal caps on.
Connection/Installation
127
English
Ñ Connecting the system and
external components
9
4
1
8
3
5
7 6
2
① Secure both ground wires from accessory ⑭
together to the chassis as show in the diagram
below.
⑩
⑭
② Dashboard camera interface
Connect a Dashboard Camera DRV-N520
(optional accessory). ((P.128)
③ Accessory ③ : Microphone
④ SiriusXM Connect Vehicle Tuner connector
For more information on how to install the
SiriusXM Connect Vehicle tuner, consult the
installation guide included with the tuner.
⑤ FM/AM antenna input
⑥ iDatalink Maestro connector
⑦ Accessory ⑥ : GPS Antenna
Use the supplied GPS antenna. Using the GPS
antenna other than the supplied one may cause
a drop in positioning accuracy.
⑧ USB terminal (USB Type-C®)
⑨ HDMI input (Type-D)
Connect a KCA-HD200 (optional accessory) to
HDMI input terminal.
W
H
D
W: 11.1 mm or less
H: 7.7 mm or less
D: 21.5 mm or less
Installation/removal of fixing bracket
When you connect the cable to HDMI terminal
and USB terminal, remove the fixture. After
connecting the cable, put the fixture again.
USB cable
HDMI cable
Fixture
Screw
Ñ Connecting an iPhone
iPhone *2
USB-C Digital AV
Multiport Adapter
or Lightning Digital
AV Adapter *2
USB terminal *1
HDMI Type D terminal
USB Type-C Cable or USB-C to
Lightning Cable *2 *3
②
(1.0 m)
KCA-HD200
(1.8 m) *4
*1 USB maximum power supply current : DC 5 V
= 3.0 A
*2 Sold separately.
*3 Depending on the iPhone connector, use a
genuine Apple Lightning-USB cable or a USB-
IF certified USB-C® cable.
If you use non-certified cable, it may not work
properly.
*4 Optional accessory
Connection/Installation
128
Ñ Connecting an Android™
smartphone
Android smartphone *2
USB Type-A Cable *3
USB Type-C Cable *3
USB terminal *1
②
(1.0 m)
⑮
*1 USB maximum power supply current : DC 5 V
= 3.0 A
*2 Sold separately.
*3 Use USB-IF certified USB cable.
Ñ Connecting a USB device
USB terminal *1
USB Type-A device *2
⑮
②
(1.0 m)
*1 USB maximum power supply current : DC 5 V
= 3.0 A
*2 Sold separately.
Ñ Connecting the camera
VIDEO IN
DASH CAM
3rd VIEW
CAMERA
FRONT VIEW
CAMERA
REAR VIEW
CAMERA
Left side view camera and
Right side view camera *2
Front view camera *4 *6
Video input (Yellow)
3rd view camera input
(Yellow)
Front view camera/
Dashboard camera
input (Yellow)
Rear view camera
input (Yellow)
*3
Ground wire *7
Rear view camera
*4 *5
⑭
DRV-N520 *1
Dashboard camera interface
*1 Optional accessory
*2 Sold separately.
*3 Up to 3 cameras of Dashboard camera, Front
view camera, Left side view camera and Right
side view camera can be connected. For
more information, see To set up the camera
assignment settings ( (P.82).
*4 CMOS-3xx series (optional accessory) or
commercially available camera.
*5 For HD video, connect an HD camera to Rear
view camera input terminal.
*6 For HD video, connect an HD camera to Front
view camera/Dashboard camera input
terminal.
*7 Secure both ground wires to the same
terminal.
Connection/Installation
129
English
Troubleshooting
Problems and Solutions
If any trouble occurs, first check the following
table for possible problems.
NOTE
• Some functions of this unit may be disabled by
some settings made on this unit.
• What might seem to be a malfunction in your unit
may just be the result of slight misoperation or
miswiring.
Ñ About settings
• Cannot set up the subwoofer.
• Cannot set up subwoofer phase.
• No output from the subwoofer.
• Cannot set up the low pass filter.
• Cannot set up the high pass filter.
Subwoofer is not set to on.
Set the subwoofer to on. See Speaker / X’over
setup ( (P.97).
Ñ About audio operations
Radio reception is poor.
The car antenna is not extended.
Pull out the antenna all the way.
The antenna control wire is not connected.
Connect the wire correctly. See Connecting the
system and external components ( (P.127).
Cannot select a folder.
The random play function is enabled.
Turn off the random function.
The unit does not respond when you try to perform
a operation during USB mirroring.
A connector is not properly connected.
Unplug the smartphone from the USB terminal,
then reattach the smartphone again.
Ñ Others
The Touch Sensor Tone doesn’t sound.
The preout jack is being used.
The Touch Sensor Tone cannot be output from the
preout jack.
Error Messages
When you fail to operate the unit correctly, the
cause of the failure appears as the message on
the screen.
There is an error in the speaker wiring. Please
check the connections.
Protective circuit has been activated because a
speaker cord has shorted or it has come in contact
with the car chassis.
Wire or insulate the speaker cord as appropriate
and turn the power off and on again.
No Device (USB device)
The USB device is selected as a source although no
USB device is connected.
Change the source to any source other than USB/
iPhone. Connect a USB device, and change the
source to USB again.
Disconnected (iPhone, Bluetooth audio player)
The iPhone/Bluetooth audio player is selected as a
source although no iPhone/Bluetooth audio player is
connected.
Change the source to any source other than
iPhone/Bluetooth. Connect an iPhone/Bluetooth
audio player, and change the source to iPhone/
Bluetooth again.
No Media file
The connected USB device contains no playable audio
file. Media was played that does not have data
recorded that the unit can play.
See Playable Media and Files ( (P.131) and try
another USB device.
USB device over current status detected.
The connected USB device is rated a current capacity
higher than the allowable limit.
Check the USB device. Some trouble may have
occurred to the connected USB device.
Change the source to any source other than USB.
Remove the USB device.
The speed sense wire is not connected. Please
check the connection.
The speed pulse disconnection is detected. By default,
it is treated as connected.
To improve precision of a vehicle position
recognition, check the connection of the speed
pulse.
Troubleshooting
130
Starting tuner failed.
The tuner unit is not operating correctly due to some
reason or other.
Turn the power off and on again. If the “Starting
tuner failed.” message does not disappear, contact
your nearest KENWOOD dealer.
Audio output has stopped due to an error. Please
restart the system.
If the issue persists, contact customer support.
An error causes audio output to stop.
Reset the system. If resetting the system does not
resolve the issue, please contact the customer
support center.
Ñ SiriusXM
SAT Antenna Error
No antenna is connected to the SXV300 Vehicle Tuner.
Check that an antenna is connected to the SXV300
Vehicle Tuner. Check antenna for damages.
SAT Hardware Error
Either the SXV300 Vehicle Tuner is not connected or
has an error.
Verify that the SiriusXM Connect Vehicle Tuner
cable is securely connected to the radio.
When the internal temperature of the SXV300 Vehicle
Tuner rises too high, the protection circuit is activated
and you may not be able to operate the unit.
Use the unit again after reducing the temperature
of the SXV300 Vehicle Tuner.
Something went wrong
The Audio signal was not read.
Try another channel.
Channel Not Available
The currently selected channel is unavailable.
Visit www.siriusxm.com for more information about
the SiriusXM channel lineup.
No Satellite Signal
No satellite signal was received at startup.
Verify that your vehicle is outdoors with a clear view
of the sky.
No Internet Signal
The device did not connect to the internet at startup.
Check whether it is connected to a Wi-Fi network.
((P.48)
Slow Network Connection
The internet connection is slow.
Check the network settings.
Episode Not Available
That episode of the podcast cannot be played.
Visit www.siriusxm.com for more information about
the SiriusXM contents lineup.
Station Not Available
That Pandora station is not available.
Visit www.siriusxm.com for more information about
the SiriusXM contents lineup.
Ñ Apple CarPlay
The GPS antenna must be connected to use Apple
CarPlay wirelessly. Please verify the proper
connections or plug in by USB to use Apple CarPlay.
The GPS antenna is not connected when the Apple
CarPlay is started by connecting wirelessly or when the
iPhone compatible with wireless Apple CarPlay is
registered in [Device List].
Check the connection of the GPS antenna or plug in
over USB to use Apple CarPlay.
Troubleshooting
131
English
Appendix
Playable Media and Files
You can play various kinds of media and files on this unit.
Ñ About files
The following audio and video files are supported.
I Playable Audio files
Format Bit rate
Sampling
frequency
Bit count
AAC-LC (.m4a) MPEG-2/MPEG-4 AAC
LC
HE-AAC(V1,V2)
8 – 320kbps, VBR 16 – 48 kHz 16 bit
MP3 (.mp3) MPEG-1/MPEG-2
Audio Layer 3
8 – 320kbps, VBR 16 – 48 kHz 16 bit
WMA (.wma) Windows Media Audio
Standard L3 profile
(Version 7,8,9)
8 – 320kbps 16 – 48 kHz 16 bit
Linear PCM (WAVE)
(.wav)
RIFF waveform Audio
Format
– 16 – 192 kHz 16 bit/24 bit
FLAC (.flac) flac – 16 – 192 kHz 16 bit/24 bit
Vorbis (.ogg) vorbis – 16 – 48 kHz 16 bit
• WMA and AAC files with DRM cannot be played.
• Although the audio files complies with the standards listed above, they may not be played
depending on the types or conditions of media or device.
• This unit supports playback of High-Resolution Audio files.
It is recommended that a car audio system should be configured with all High-Resolution Audio
compatible products from player to speaker to enjoy its high quality sound.
I Acceptable Video files
Profile Max. Picture size Max. bit rate Audio format
MPEG-1 (.mpg, .mpeg) – 352 × 240, 352 × 288 1.5 Mbps MPEG Audio Layer 2
MPEG-2 (.mpg, .mpeg) MP@ML 720 × 480, 720 × 576 8 Mbps MPEG Audio Layer 2
H.264/MPEG-4 AVC
(.mp4, .m4v, .avi, .flv, .f4
v)
Baseline Profile, Main
Profile
1920 × 1080 (30 fps) 8 Mbps MP3, AAC
MPEG-4 (.mp4, .avi) Advanced Simple
Profile
1920 × 1080 (30 fps) 8 Mbps MP3, AAC
WMV (.wmv) Main Profile 1920 × 1080 (30 fps) 8 Mbps WMA
MKV (.mkv) Video format follows H.264/MPEG-4 AVC, MPEG-4, WMV MP3, AAC, WMA,
Vorbis, FLAC
I Limitation on structure of file and folder
USB device
Maximum number of folder layers 8
Maximum number of files (per folder) 9999
Appendix
132
USB device
Maximum number of folders (per folder) 9999
Maximum number of folders (per device) Unlimited
• You can enter a folder name and file name with 255 or fewer single-byte characters.
• Files in the folder whose folder name begins with a dot (.) cannot be played.
Appendix
133
English
Specifications
I Monitor section
Picture Size
DMX1058XR/DMX1038S/DAX1050XR
: 10.1 inches (diagonal) wide
: 223.7 mm (W) × 125.8 mm (H)
8-13/16 × 4-15/16 inch
DAX800XR/DAX8000S
: 8.0 inches(diagonal) wide
: 176.64 mm (W) x 99.36 mm (H)
6-15/16 x 3-15/16 (inch)
Display System
: LCD panel
Drive System
: TFT active matrix system
Number of Pixels
: 2,764,800 (1280H × 720V × RGB)
Effective Pixels
: 99.99 %
Pixel Arrangement
: RGB striped arrangement
Back Lighting
: LED
I USB interface section
Connector type
: Type-C
USB Standard
: USB 2.0 High Speed
File System
: FAT16, FAT32, exFAT, NTFS
Maximum Power Supply Current
: DC 5 V = 3.0 A
D/A Converter
: 24 bit / 32 bit
Audio Decoder
: MP3 / WMA / AAC / WAV / FLAC / Vorbis
Video Decoder
: MPEG-1 / MPEG-2 / MPEG-4 / WMV / H.264 /
MKV
Frequency Response
• 192 kHz : 20 – 88,000 Hz
• 96 kHz : 20 – 44,000 Hz
• 48 kHz : 20 – 22,000 Hz
• 44.1 kHz : 20 – 20,000 Hz
Total Harmonic Distortion
: 0.01 % (1 kHz)
S/N Ratio (dB)
: 98.5 dB
Dynamic Range
: 89 dB
I Wireless Mirroring section
Mode
: Sink
Copyright protection
: HDCP2.2
Touch Control
: UIBC
I Wi-Fi section
IEEE Standard
: 802.11 a/b/g/n/ac
Frequency Range
: Dual Band (2.4GHz/5GHz)
Channels
: Auto (1-11ch) / Auto (149,153,157,161ch)
Transfer rates (MAX)
: 11a: 54 Mbps / 11b: 11 Mbps / 11g: 54 Mbps /
11n: 300 Mbps / 11ac: 867 Mbps
I Bluetooth section
Technology
: Bluetooth Ver.5.2
Frequency
: 2.402 – 2.480 GHz
Maximum Communication range
: Line of sight approx. 10m (32.8 ft)
Audio Codec
DMX1058XR/DAX1050XR/DAX800XR
: LDAC/SBC/AAC
DMX1038S/DAX8000S
: SBC/AAC
Profile (Multi Profile support)
• HFP (V1.7) (Hands Free Profile)
• SPP (Serial Port Profile)
Appendix
134
• A2DP (Advanced Audio Distribution Profile)
• AVRCP (V1.6) (Audio/Video Remote Control
Profile)
• PBAP (Phonebook Access Profile)
I HDMI section
HDMI
: Type-D
Input Resolution
• VGA (640x480p @59.94Hz/60Hz)
• 480p (720x480p @59.94Hz/60Hz)
• 720p (1280x720p @59.94Hz/60Hz)
Input Audio Type
: 32k/44.1k/48k/88.2k/96k/176.2k/192k Hz
16 bit/20 bit/24 bit Linear PCM
I DSP section
Graphics equalizer
• Band: 13 Band
• Frequency (BAND1 – 13)
: 62.5/100/160/250/400/630/1k/1.6k/2.5k/4k/
6.3k/10k/16k Hz
Gain
: -9/-8/-7/-6/-5/-4/-3/-2/-1/0/1/2/3/4/5/6/7/8/9
dB
2-way X'Over
• High pass filter
– Frequency: Through,
30/40/50/60/70/80/90/100/120/150/180/2
20/250 Hz
– Slope: -6/-12/-18/-24 dB/Oct.
• Low pass filter
– Frequency:
30/40/50/60/70/80/90/100/120/150/180/2
20/250 Hz, Through
– Slope: -6/-12/-18/-24 dB/Oct.
3-way X'Over
• High pass filter
– Frequency: 250/300/1k/1.6k/2.5k/4k/5k/
6.3k/8k/10k/12.5k Hz
– Slope: -12/-18/-24 dB/Oct.
• Band pass filter
– Frequency:
Through,
50/60/70/80/90/100/120/150/180/220/250
/300 Hz
250/300/1k/1.6k/2.5k/4k/5k/6.3k/8k Hz,
Through
– Slope: -12/-18/-24 dB/Oct.
• Low pass filter
– Frequency:
30/40/50/60/70/80/90/100/120/150 Hz,
Through
– Slope: -12/-18/-24 dB/Oct.
Position
• Front / Rear /Subwoofer Delay
: 0 – 20.01 ft (0.03 or 0.04 ft Step)
• Gain
: -8 – 0 dB
Subwoofer level
: -50 – +10 dB
I Digital FM tuner section
Frequency Range (step)
: 87.9 MHz – 107.9 MHz (200 kHz)
Frequency Response (± 3.0 dB)
: 20 Hz – 20 kHz
S/N Ratio
: 80 dB (STEREO)
I Digital AM tuner section
Frequency Range (step)
: 530 kHz – 1700 kHz (10 kHz)
Frequency Response (± 3.0 dB)
: 40 Hz – 15 kHz
S/N Ratio (dB)
: 80 dB (STEREO)
I FM tuner section
Frequency Range (step)
: 87.9 MHz - 107.9 MHz (200 kHz)
Usable Sensitivity (S/N : 30 dB)
: 7.3 dBf (0.7 μV/75 Ω)
Frequency Response
: 30 Hz – 15 kHz
S/N Ratio (dB)
: 70 dB (MONO)
Selectivity (± 400 kHz)
: 80 dB
Stereo Separation
: 45 dB (1 kHz)
Appendix
135
English
I AM tuner section
Frequency Range (step)
: 530 kHz - 1700 kHz (10 kHz)
Usable Sensitivity
: 30dBμ
I Video section
Color System of External Video Input
: NTSC/PAL
External video input level (RCA jacks)
: 1 Vp-p/75 kΩ
Video Input Level (RCA jacks)
: 1 Vp-p/75 Ω
Video Output Level (RCA jacks)
: 1 Vp-p/75 Ω
I Audio section
Maximum Power (Front & Rear)
: 50 W × 4
Typical Power Output (Front & Rear)
: 29 W × 4 (4 Ω,1 kHz, 10% THD)
Output frequency band
: 20 – 88,000 Hz
Preout Level (V)
DMX1058XR/DAX1050XR/DAX800XR
: 5 V / 10 kΩ
DMX1038S/DAX8000S
: 4 V / 10 kΩ
Preout Impedance
: ≤ 300 Ω
Speaker Impedance
: 4 – 8 Ω
External Audio Max Input Level (RCA jacks)
: 2 V / 22 kΩ
I Digital Audio Out (DMX1058XR/
DAX1050XR/DAX800XR only)
Connector Type
: OPTICAL
Output frequency
: 48 kHz / 96 kHz, 24 bit, Linear PCM
I General
Operating Voltage
: 12 V DC car battery
Dimensions (W × H × D)
• Chassis
DMX1058XR/DMX1038S
: 178 × 50 × 158 mm
7 × 2 × 6-1/4 inch
DAX1050XR/DAX800XR/DAX8000S
: 178 × 50 × 105 mm
7 × 2 × 4-1/8 mm
• Monitor
DMX1058XR/DMX1038S/DAX1050XR
: 262 × 181 × 52 mm
10-5/16 × 7-1/8 × 2-1/16 inch
DAX800XR/DAX8000S
: 190 × 120 × 28 mm
7-1/2 × 4-3/4 × 1-1/8 inch
Weight
DMX1058XR/DMX1038S
: 2.5 kg (5.6 lbs)
DAX1050XR
: 2.1 kg (4.5 lbs)
DAX800XR/DAX8000S
: 1.4 kg (3.1 lbs)
• Chassis
DMX1058XR/DMX1038S
: 1.3 kg (2.9 lbs)
DAX1050XR/DAX800XR/DAX8000S
: 0.8 kg (1.8 lbs)
• Monitor
DMX1058XR/DMX1038S/DAX1050XR
: 1.1 kg (2.4 lbs)
DAX800XR/DAX8000S
: 0.6 kg (1.3 lbs)
NOTE
• Although the effective pixels for the liquid crystal
panel is given as 99.99% or more, 0.01% of pixels
may not light or may light incorrectly.
Specifications are subject to change without
prior notice.
Appendix
136
About this Unit
Ñ Trademarks and licenses
• The Bluetooth® word mark and logos are
registered trademarks owned by Bluetooth
SIG, Inc. and any use of such marks by
JVCKENWOOD Corporation is under license.
Other trademarks and trade names are those
of their respective owners.
• LDAC and LDAC logo are trademarks of Sony
Corporation.
• Hi-Res Audio logo and Hi-Res Audio Wireless
logo are used under license from Japan
Audio Society.
• Windows Media is a registered trademark or
trademark of Microsoft Corporation in the
United States and/or other countries.
This product is protected by certain
intellectual property rights of Microsoft. Use
or distribution of such technology outside of
this product is prohibited without a license
from Microsoft.
• This software is based in part on the work of
the independent JPEG Group.
• Use of the Made for Apple badge means that
an accessory has been designed to connect
specifically to the Apple product(s) identified
in the badge, and has been certified by the
developer to meet Apple performance
standards. Apple is not responsible for the
operation of this device or its compliance
with safety and regulatory standards. Please
note that the use of this accessory with an
Apple product may affect wireless
performance.
• Apple, Apple CarPlay, Apple Music, iPhone,
Lightning, and Siri are trademarks of Apple
Inc., registered in the U.S. and other countries
and regions.
• Use of the Apple CarPlay logo means that a
vehicle user interface meets Apple
performance standards. Apple is not
responsible for the operation of this vehicle
or its compliance with safety and regulatory
standards. Please note that the use of this
product with iPhone, iPod, or iPad may affect
wireless performance.
• App Store is a service mark of Apple Inc.,
registered in the U.S. and other countries.
• IOS is a trademark or registered trademark of
Cisco in the U.S. and other countries and is
used under license.
• SiriusXM and all related marks and logos are
trademarks of Sirius XM Radio, Inc. All rights
reserved.
• HD Radio™ Technology manufactured under
license from iBiquity Digital Corporation, a
subsidiary of Xperi Inc., U.S. and Foreign
Patents. For patents see https://xperi.com/
hd-radio-patents/. Xperi, HD Radio, HD, and
‘ARC’ logos and their respective logos are
trademarks or registered trademarks of Xperi
Inc. and its subsidiaries in the United States
and other countries.
• Google, Android, Android Auto, Google Play
and other marks are trademarks of Google
LLC.
Wireless use of Android Auto requires a
compatible Android 11.0+ phone and
compatible active data plan.
Check g.co/androidauto/requirements for
compatibility.
• Wi-Fi® is a registered trademark of Wi-Fi
Alliance®.
• The Wi-Fi CERTIFIED™ Logo is a certification
mark of Wi-Fi Alliance®.
• USB Type-C® and USB-C® are registered
trademarks of USB Implementers Forum.
• The terms HDMI and HDMI High-Definition
Multimedia Interface, and the HDMI Logo are
trademarks or registered trademarks of HDMI
Licensing Administrator, Inc. in the United
States and other countries.
• This product includes FontAvenue® fonts
licenced by NEC Corporation. FontAvenue is
a registered trademark of NEC Corporation.
• This product includes "Ubiquitous QuickBoot
™" technology developed by Ubiquitous AI
Corporation. Ubiquitous QuickBoot ™ is a
trademark of Ubiquitous AI Corporation.
Copyright© 2025 Ubiquitous AI Corporation
All rights reserved.
Appendix
137
English
• THIS PRODUCT IS LICENSED UNDER THE AVC
PATENT PORTFOLIO LICENSE FOR THE
PERSONAL USE OF A CONSUMER OR OTHER
USES IN WHICH IT DOES NOT RECEIVE
REMUNERATION TO (¡)ENCODE VIDEO IN
COMPLIANCE WITH THE AVC STANDARD
(“AVC VIDEO”) AND/OR (¡¡)DECODE AVC
VIDEO THAT WAS ENCODED BY A
CONSUMER ENGAGED IN A PERSONAL
ACTIVITY AND/OR WAS OBTAINED FROM A
VIDEO PROVIDER LICENSED TO PROVIDE AVC
VIDEO. NO LICENSE IS GRANTED OR SHALL BE
IMPLIED FOR ANY OTHER USE. ADDITIONAL
INFORMATION MAY BE OBTAINED FROM
MPEG LA, L.L.C. SEE HTTP://
WWW.MPEGLA.COM
• THIS PRODUCT IS LICENSED UNDER THE VC-1
PATENT PORTFOLIO LICENSE FOR THE
PERSONAL AND NON-COMMERCIAL USE OF
A CONSUMER TO ( i ) ENCODE VIDEO IN
COMPLIANCE WITH THE VC-1 STANDARD
(“VC-1 VIDEO”) AND/OR ( ii ) DECODE VC-1
VIDEO THAT WAS ENCODED BY A
CONSUMER ENGAGED IN A PERSONAL AND
NON-COMMERCIAL ACTIVITY AND/OR WAS
OBTAINED FROM A VIDEO PROVIDER
LICENSED TO PROVIDE VC-1 VIDEO. NO
LICENSE IS GRANTED OR SHALL BE IMPLIED
FOR ANY OTHER USE. ADDITIONAL
INFORMATION MAY BE OBTAINED FROM
MPEG LA, L.L.C. SEE HTTP://
WWW.MPEGLA.COM
• libFLAC
Copyright (C) 2000-2009 Josh Coalson
Copyright (C) 2011-2013 Xiph.Org
Foundation
Redistribution and use in source and binary
forms, with or without modification, are
permitted provided that the following
conditions are met:
– Redistributions of source code must retain
the above copyright notice, this list of
conditions and the following disclaimer.
– Redistributions in binary form must
reproduce the above copyright notice, this
list of conditions and the following
disclaimer in the documentation and/or
other materials provided with the
distribution.
– Neither the name of the Xiph.org
Foundation nor the names of its
contributors may be used to endorse or
promote products derived from this
software without specific prior written
permission.
THIS SOFTWARE IS PROVIDED BY THE
COPYRIGHT HOLDERS AND CONTRIBUTORS
``AS IS'' AND ANY EXPRESS OR IMPLIED
WARRANTIES, INCLUDING, BUT NOT LIMITED
TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE ARE DISCLAIMED. IN
NO EVENT SHALL THE FOUNDATION OR
CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
INDIRECT, INCIDENTAL, SPECIAL,
EXEMPLARY, OR CONSEQUENTIAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR
SERVICES; LOSS OF USE, DATA, OR PROFITS;
OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY,
OR TORT (INCLUDING NEGLIGENCE OR
OTHERWISE) ARISING IN ANY WAY OUT OF
THE USE OF THIS SOFTWARE, EVEN IF
ADVISED OF THE POSSIBILITY OF SUCH
DAMAGE.
• libvorbis
Copyright (c) 2002-2008 Xiph.org Foundation
Redistribution and use in source and binary
forms, with or without modification, are
permitted provided that the following
conditions are met:
– Redistributions of source code must retain
the above copyright notice, this list of
conditions and the following disclaimer.
– Redistributions in binary form must
reproduce the above copyright notice, this
list of conditions and the following
disclaimer in the documentation and/or
other materials provided with the
distribution.
– Neither the name of the Xiph.org
Foundation nor the names of its
contributors may be used to endorse or
promote products derived from this
software without specific prior written
permission.
Appendix
138
THIS SOFTWARE IS PROVIDED BY THE
COPYRIGHT HOLDERS AND CONTRIBUTORS
``AS IS’’ AND ANY EXPRESS OR IMPLIED
WARRANTIES, INCLUDING, BUT NOT LIMITED
TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE ARE DISCLAIMED. IN
NO EVENT SHALL THE FOUNDATION OR
CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
INDIRECT, INCIDENTAL, SPECIAL,
EXEMPLARY, OR CONSEQUENTIAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR
SERVICES; LOSS OF USE, DATA, OR PROFITS;
OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY,
OR TORT (INCLUDING NEGLIGENCE OR
OTHERWISE) ARISING IN ANY WAY OUT OF
THE USE OF THIS SOFTWARE, EVEN IF
ADVISED OF THE POSSIBILITY OF SUCH
DAMAGE.
• libogg
Copyright (c) 2002, Xiph.org Foundation
Redistribution and use in source and binary
forms, with or without modification, are
permitted provided that the following
conditions are met:
– Redistributions of source code must retain
the above copyright notice, this list of
conditions and the following disclaimer.
– Redistributions in binary form must
reproduce the above copyright notice, this
list of conditions and the following
disclaimer in the documentation and/or
other materials provided with the
distribution.
– Neither the name of the Xiph.org
Foundation nor the names of its
contributors may be used to endorse or
promote products derived from this
software without specific prior written
permission.
THIS SOFTWARE IS PROVIDED BY THE
COPYRIGHT HOLDERS AND CONTRIBUTORS
``AS IS’’ AND ANY EXPRESS OR IMPLIED
WARRANTIES, INCLUDING, BUT NOT LIMITED
TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE ARE DISCLAIMED. IN
NO EVENT SHALL THE FOUNDATION OR
CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
INDIRECT, INCIDENTAL, SPECIAL,
EXEMPLARY, OR CONSEQUENTIAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR
SERVICES; LOSS OF USE, DATA, OR PROFITS;
OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY,
OR TORT (INCLUDING NEGLIGENCE OR
OTHERWISE) ARISING IN ANY WAY OUT OF
THE USE OF THIS SOFTWARE, EVEN IF
ADVISED OF THE POSSIBILITY OF SUCH
DAMAGE.
Appendix
139
English
Ñ Safety Information
I FCC CAUTION
Changes or modifications not expressly
approved by the party responsible for
compliance could void the user's authority to
operate the equipment.
NOTE
• This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential
installation.
• This equipment generates, uses and can radiate
radio frequency energy and, if not installed and
used in accordance with the instructions, may
cause harmful interference to radio
communications. However, there is no guarantee
that interference will not occur in a particular
installation. If this equipment does cause harmful
interference to radio or television reception, which
can be determined by turning the equipment off
and on, the user is encouraged to try to correct the
interference by one or more of the following
measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment
and receiver.
– Connect the equipment into an outlet on a
circuit different from that to which the receiver is
connected.
– Consult the dealer or an experienced radio/TV
technician for help.
This transmitter must not be co-located or
operated in conjunction with any other antenna
or transmitter.
I ISED CAUTION
This device contains licence-exempt
transmitter(s)/receiver(s) that comply with
Innovation, Science and Economic
Development Canada’s licence-exempt RSS(s).
Operation is subject to the following two
conditions:
1. This device may not cause interference.
2. This device must accept any interference,
including interference that may cause
undesired operation of the device.
# CAUTION
This equipment complies with FCC/ISED
radiation exposure limits set forth for an
uncontrolled environment and meets the FCC
radio frequency (RF) Exposure Guidelines and
RSS-102 of the ISED radio frequency (RF)
Exposure rules. This equipment should be
installed and operated keeping the radiator at
least 20cm or more away from person’s body.
Supplier’s Declaration of Conformity
Trade Name: KENWOOD
Products: MONITOR WITH RECEIVER
Model Name: DMX1058XR/DMX1038S/DAX1050XR/
DAX800XR/DAX8000S
Responsible
Party:
JVCKENWOOD USA CORPORATION
4001 Worsham Avenue, Long Beach,
CA 90808, U.S.A.
PHONE : 1-800-252-5722
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC
RULES. OPERATION IS SUBJECT TO THE FOLLOWING
TWO CONDITIONS:
1. THIS DEVICE MAY NOT CAUSE HARMFUL
INTERFERENCE, AND
2. THIS DEVICE MUST ACCEPT ANY INTERFERENCE
RECEIVED, INCLUDING INTERFERENCE THAT MAY
CAUSE UNDESIRED OPERATION.
I Información acerca de la eliminación de
equipos eléctricos y electrónicos al final
de la vida útil (aplicable a los países que
hayan adoptado sistemas
independientes de recogida de
residuos)
Los productos con el símbolo de un contenedor
con ruedas tachado no podrán ser desechados
como residuos domésticos.
Appendix
140
Los equipos eléctricos y electrónicos al final de
la vida útil, deberán ser reciclados en
instalaciones que puedan dar el tratamiento
adecuado a estos productos y a sus
subproductos residuales correspondientes.
Póngase en contacto con su administración
local para obtener información sobre el punto
de recogida más cercano. Un tratamiento
correcto del reciclaje y la eliminación de
residuos ayuda a conservar los recursos y evita
al mismo tiempo efectos perjudiciales en la
salud y el medio ambiente.
I Informação sobre a eliminação de
pilhas
Este produto não deve ser eliminado como lixo
doméstico geral. Devolva a pilha usada ao
revendedor ou entidade autorizada para que a
mesma seja devolvida ao fabricante ou
importador.
A reciclagem e a eliminação de lixo de maneira
apropriada ajudarão a conservar os recursos
naturais ao mesmo tempo que prevenirão os
efeitos prejudicais à nossa saúde e ao meio
ambiente.
I Para cumplimiento de la IFT:
La operación de este equipo esta sujeta a las
siguientes dos condiciones:
(1) es posible que este equipo o dispositivo no
cause interferencia perjudicial y
(2) este equipo o dispositivo debe aceptar
cualquier interferencia,
incluyendo la que pueda causar su operación
no deseada.
For DAX800XR/DAX8000S
I CALIFORNIA, USA
This product contains a CR Coin Cell Lithium
Battery which contains Perchlorate Material –
special handling may apply.
See www.dtsc.ca.gov/hazardouswaste/
perchlorate.
Appendix
Hi-Res Audio logo and Hi-Res Audio
Wireless logo are used under license
from Japan Audio Society.
