ninjakitchen.com.au
ninjakitchen.co.nz
CB150ANZ
INSTRUCTIONS
TWISTI™ HIGH-SPEED
BLENDER DUO™
2 AUS +61 2 8801 7666 | NZ +64 800 112 660
PLEASE READ CAREFULLY AND
KEEP FOR FUTURE REFERENCE.
TECHNICAL SPECIFICATIONS
Voltage: 220-240V~, 50-60Hz
Watts: 1100W
RECORD THIS INFORMATION
Model Number: ����������������
Serial Number: �����������������
Date of Purchase: ���������������
(Keep receipt)
Store of Purchase: ��������������
REGISTER YOUR PURCHASE
AU ninjakitchen.com.au/apps/
product-registration
NZ ninjakitchen.co.nz/apps/
product-registration
Scan QR code using mobile device
3
CONTENTS
THANK YOU FOR PURCHASING
The Ninja® TWISTi™ High-Speed Blender Duo™
Product Registration ..................................2
Important Safeguards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Getting to Know Your Blender . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Before First Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Getting to know the Power Nutri™ Jug . . . . . . . . . . . . . . . . . . . . . . . 6
Using the Control Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Using the Power Nutri Jug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Using the Power Nutri Cup . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Care & Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Storing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Resetting the Motor Thermostat . . . . . . . . . . . . . . . . . . . . . . . . . .12
Troubleshooting Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Ordering Replacement Parts .......................... 13
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
ninjakitchen.com.au | ninjakitchen.co.nz
4 AUS +61 2 8801 7666 | NZ +64 800 112 660 5
SAVE THESE INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
PLEASE READ CAREFULLY BEFORE USE • FOR HOUSEHOLD USE ONLY
1 Carefully observe and follow all warnings
and instructions. This unit contains
electrical connections and moving parts
that potentially present risk to the user.
2 ALWAYS exercise care when handling the
Hybrid Edge Blades Assembly. The blades
are sharp, handle carefully. ONLY grasp
the Hybrid Edge Blades Assembly by the
outer perimeter of the blade assembly
base. Failure to use care when handling
the blade assembly will result in a risk of
laceration.
3 Take your time and exercise care during
unpacking and appliance setup. This
appliance contains sharp, loose blades that
can cause injury if mishandled.
4 Take an inventory of all contents to ensure
you have all parts needed to properly and
safely operate your appliance.
5 Blades are loose and sharp. Handle carefully.
6 Always disconnect the appliance from the
supply if it is left unattended and before
assembling, disassembling or cleaning. To
unplug, grasp the plug by the body and
pull from the socket. NEVER unplug by
grasping and pulling the flexible cord.
7 Before use, wash all parts that may
come into contact with food. Follow
washing instructions covered in this
instructionmanual.
8 To protect against the risk of electric
shock, DO NOT submerge the appliance or
allow the power cord to contact any form
of liquid.
9 DO NOT use this appliance outdoors. It is
designed for indoor household use only.
10 DO NOT operate any appliance with a
damaged cord or plug, or after the appliance
malfunctions or is dropped or damaged in
any manner. This appliance has no user-
serviceable parts. If damaged, contact
SharkNinja for servicing.
11 Extension cords should NOT be used with
this appliance.
12 This appliance should not be used by
children. Keep the appliance and its cord
out of reach of children. Children should
not play with the appliance.
13 This appliance is NOT intended to be used
by people with reduced physical, sensory,
or mental capabilities, or lack of experience
and knowledge, unless they have been given
supervision or instruction concerning use of
the appliance by a person responsible for
their safety.
14 Before each use, inspect blade assembly
for damage. If a blade is bent or damage is
suspected, contact SharkNinja to arrange
for replacement.
15 DO NOT attempt to sharpen blades.
16 DO NOT allow the unit or the cord to hang
over the edges of tables or worktops. The
cord may become snagged and pull the
appliance o the work surface.
17 DO NOT allow any part of the unit to
contact hot surfaces, including stoves and
other heating appliances.
18 ALWAYS use the appliance on a dry and
level surface.
19 NEVER place a blade assembly on the
motor base without it first being attached
to the container.
20 Keep hands, hair and clothing out of the
container when loading and operating
21 ONLY use attachments and accessories
that are provided with the product or are
recommended by SharkNinja. The use of
attachments not recommended or sold by
SharkNinja may cause fire, electric shock,
or injury.
22 During operation and handling of the
appliance, avoid contact with moving parts.
23 DO NOT operate the appliance with an
empty container.
24 DO NOT fill containers past the MAX FILL
or MAX LIQUID lines.
25 DO NOT microwave any containers or
accessories provided with the appliance.
26 DO NOT use for grinding ingredients.
27 Before operation, ensure all utensils are
removed from containers. Failure to
remove utensils can cause containers to
shatter and potentially result in personal
injury and property damage.
28 NEVER operate the appliance without lids
and caps in place. DO NOT attempt to
defeat the interlock mechanism. Ensure
the container and lid are properly installed
before operation.
29 DO NOT expose the containers and
accessories to extreme temperature
changes. They may experience damage.
30 NEVER leave the appliance unattended
while in use.
31 DO NOT blend hot liquids. Doing so may
result in pressure buildup and steam
exposure that can pose a risk of the user
being burned.
32 If you find unmixed ingredients sticking to
the sides of the cup, stop the appliance,
remove the blade assembly and use a
scraper to dislodge ingredients.
33 DO NOT attempt to remove the container
and lids from the motor base while the
blade assembly is still spinning. Allow the
appliance to come to a complete stop
before removing lid and container.
34 Remove the Hybrid Edge Blades
Assembly from the Power Nutri Cup
upon completion of blending. DO NOT
store ingredients before or after blending
them in the cup with the blade assembly
attached. Some foods may contain
active ingredients or release gases that
will expand if left in a sealed container,
resulting in excessive pressure buildup that
can pose a risk of injury. For ingredient
storage in the cup, use only Spout Lid to
cover.
35 If the appliance overheats, a thermal
switch will activate and temporarily
disable the motor. To reset, unplug
the appliance and allow it to cool for
approximately 15 minutes before
using again.
36 The maximum wattage rating for this
appliance is based on the configuration
of the Hybrid Edge Blades Assembly and
Power Nutri Cup. Other configurations may
draw less power or current.
37 DO NOT process dry ingredients without
adding liquid to the Power Nutri Cup or
Power Nutri Jug. They are not intended for
dry blending.
38 To protect against risk of electrical shock,
DO NOT immerse the motor base in water
or other liquid. Unplug the motor base
before cleaning.
39 DO NOT misuse the appliance to avoid
potential injury.
40 Keep drizzle hole covered while processing.
41 Only add liquids through the drizzle hole and
do not fill past max fill lines.
Read and review instructions for operation and use.
Indicates the presence of a hazard that can cause personal injury, death or
substantial property damage if the warning included with this symbol is ignored.
For indoor and household use only.
When using electrical appliances, basic safety precautions should always be
followed, including the following:
WARNING: Handle the Hybrid Edge™ Blades Assembly with care, as the blades are loose and sharp.
WARNING: Remove utensils prior to processing. Failure to remove may cause the Power Nutri Cup to
be damaged or to shatter, which may cause personal injury.
WARNING: Do not blend hot, eervescent, or carbonated liquids. Doing so may cause
excessive pressure buildup, resulting in risk of laceration and/or the user being burned.
WARNING: Remove the Hybrid Edge Blades Assembly from the Power Nutri Cup upon
completion of blending. Do not store ingredients before or after blending them in the cup with the
blade assembly attached. Some foods may contain active ingredients or release gases that will expand
if left in a sealed container, resulting in excessive pressure buildup that can pose a risk of injury.
WARNING: To reduce the risk of injury, fire, electrical shock, or property damage, basic safety
precautions must always be followed, including the following numbered warnings and subsequent
instructions. Do not use appliance for other than intended use.
ninjakitchen.com.au | ninjakitchen.co.nz
6 ninjakitchen.com.au | ninjakitchen.co.nzAUS +61 2 8801 7666 | NZ +64 800 112 660
AUTO-IQ® PROGRAMS
Intelligent preset programs combine unique
blending and pausing patterns that do the work
for you. Once a preset program is selected, it
will start immediately and automatically stop
when blending is complete. To stop blending
before the end of the program, press the
currently active button again.
EXTRACT
Ideal for tough, leafy, or fibrous whole fruits
and vegetables, including their skins, seeds,
and stems.
SMOOTHIE
Combine your favorite fresh or frozen
ingredients, liquids, and powders to create
smoothies and protein shakes.
FROZEN
Crush ice and frozen fruit into restaurant-style
frozen drinks.
SPREAD
Create anything from spreadable nut butters
to zesty dressings to the perfect hummus.
BOWL
Make thick, spoonable smoothie bowls, creamy
frozen yoghurt, and refreshing sorbets.
NOTE: For best results when making
thicker recipes, use the MIX or
POWERMIX program and twist the Power
Paddle in the jug while processing.
MANUAL MODE
PULSE
Oers greater control of pulsing and
blending. Operates only when PULSE is
pressed. Use short presses for short pulses
and long presses for long pulses.
START/STOP
Press for continuous blending up to
60 seconds; press again to stop. Can also be
pressed to stop a running Auto-iQ program.
D
B
A
C
F
E
77
PARTS
A 1L Power Nutri™ Jug
B Jug Lid with Power Paddle
C 1 x Spout Lid
D 1 x 700ml Power Nutri Cup
E Hybrid Edge™ Blade Assembly
F Motor Base
(attached power cord not shown)
GETTING TO KNOW YOUR BLENDER
IMPORTANT: Review all warnings on
pages 4–5 before proceeding.
NOTE: Handle the Hybrid Edge Blades
Assembly by grasping around the
perimeter of the blade assembly base.
NOTE: The top flap of your box shows
the select accessories that are included
with your model.
1 Remove and discard any packaging
material and tape from the unit. Some
stickers are to be permanently kept on
the unit, ONLY remove stickers with ‘peel
here’. Exercise care when unpacking
blade assembly, as the blades are sharp.
2 Wash containers, lids and blade
assembly in warm, soapy water using
a dishwashing utensil with a handle to
avoid direct contact with the blades.
Exercise care when handling blade
assembly, as the blades are sharp.
3 Thoroughly rinse and air-dry all parts.
Powering through tough
and frozen ingredients
used to require a lot of
stopping, scraping and
recipe tinkering. But now,
it’s easier than ever to
create thick and spoonable
smoothie bowls, nut butters
and more. All you have
to do is twist the Power
Paddle while blending to
push ingredients down
toward the blade. It’s like
having a built-in tamper.
There are a variety of accessories that are
compatible with this blender series.
NOTE: Accessories are top-rack
dishwasher safe and should NOT be
cleaned with a heated dry cycle. Ensure
blade assembly and lid are removed
from the container before placing in the
dishwasher. Exercise care when handling
blade assembly.
BEFORE FIRST USE
USING THE CONTROL PANEL
NOTE: The Hybrid Edge Blades
Assembly is not compatible with other
Ninja products.
GETTING TO KNOW
THE POWER NUTRI JUG
To order additional parts and attachments,
visit ninjakitchen.com.au
ninjakitchen.co.nz
9ninjakitchen.com.au | ninjakitchen.co.nzAUS +61 2 8801 7666 | NZ +64 800 112 660 8 9
USING THE POWER NUTRI JUG
3 Install the lid by aligning the red tab to
the right of the jug handle. Rotate the tab
clockwise into the jug handle to align and
lock into place.
5a If using an Auto-iQ program, select the
program that best suits your desired
output. During the blending process,
twist the Power Paddle anti-clockwise
continuously. The preset feature will
automatically stop at the end of the
program. To stop the unit at any time,
press the currently active program again.
5b If using START/STOP, once the
ingredients have reached your desired
consistency, press START/STOP again
and wait for the unit to come to a
complete stop. During the blending
process, make sure to twist the Power
Paddle anti-clockwise continuously.
4 Install the jug onto the base. Rotate
jug clockwise until it clicks into place.
Programs will illuminate when unit is
ready to use.
7 When blending is complete, remove
the jug from the base. Remove lid and
empty contents. When jug is empty,
remove blade assembly. DO NOT
store blended contents with the blade
assembly attached. Exercise care when
handling the blade assembly, as the
blades are sharp.
6 Remove the jug from the motor base by
turning it anti-clockwise and then lifting
up.
IMPORTANT: Review all warnings on
pages 4–5 before proceeding.
1 Plug in motor base and place on a clean,
dry, level surface such as a worktop
or table.
2 Screw on the blade assembly until you
have a tight seal and add liquid then
ingredients to the Power Nutri Jug. DO
NOT add liquid past the LIQUID FILL line
or ingredients past the MAX FILL line.
8 Unplug the unit when finished. Refer
to the Care & Maintenance section for
cleaning and storage instructions.
NOTE: While processing, twist the Power
Paddle anti-clockwise continuously.
NOTE: If results are too thick, open the
drizzle hole cap and add more liquid.
Close the cap and continue twisting the
tamper anti-clockwise during blending.
NOTE: If the motor base is dicult to
remove from the worktop or table, slide
it across the surface, then lift. It shouldn’t
be forced as the suction cups will grip
more tightly to the surface.
NOTE: Keep the drizzle cap closed when
processing liquids.
NOTE: If the unit is plugged in but the
jug or cup and blade assembly is not
properly installed, the timer will display
- -” and the motor will be disabled.
NOTE: Auto-iQ programs have pauses
and changes in speed throughout
the cycle.
11ninjakitchen.com.au | ninjakitchen.co.nzAUS +61 2 8801 7666 | NZ +64 800 112 660 10 11
USING THE POWER NUTRI CUP
3 Place the Hybrid Edge Blades Assembly
on the top of the cup and turn clockwise
to seal.
5a If using an Auto-iQ program, select
the program that best suits your
desired output. The preset feature will
automatically stop at the end of the
program. To stop the unit at any time,
press the currently active program again.
5b If using START/STOP, once the
ingredients have reached your desired
consistency, press START/STOP again
and wait for the unit to come to a
complete stop.
4 Turn the cup upside down and install on
the motor base by aligning the tabs on
the cup with the slots on the base. Then,
rotate cup clockwise until it clicks. Once
locked in place, the available program
buttons will illuminate and the unit will
be ready for use.
7 Remove the blade assembly by twisting
anti-clockwise. DO NOT store blended
contents with the blade assembly
attached. Only use the Spout Lid to
cover. Exercise care when handling the
blade assembly, as the blades are sharp.
8 To enjoy on the go, place the Spout Lid
onto the cup and twist lid clockwise
until firmly sealed.
9 Unplug the unit when finished. Refer
to the Care & Maintenance section for
cleaning and storage instructions.
6 Remove the cup from the motor base
by turning it anti-clockwise and then
lifting up.
IMPORTANT: Review all warnings on
pages 4–5 before proceeding.
2 Add ingredients to the Power Nutri Cup.
DO NOT add ingredients past the
MAX LIQUID line.
1 Plug in motor base and place on a clean,
dry, level surface such as a worktop or table.
NOTE: If the unit is plugged in, but the
jug or cup and blade assembly is not
properly installed, the timer will display
- -” and the motor will be disabled.
NOTE: If the motor base is dicult
to remove from the worktop or table,
slide it across the surface, then lift. It
shouldn’t be forced as the suction cups
will grip more tightly to the surface.
NOTE: Auto-iQ programs have pauses
and changes in speed throughout the
cycle.
NOTE: The Power Nutri Cup and Jug
share the Hybrid Edge Blade Assembly.
Unscrew from pre-assembled Jug.
POWERMIX
BLEND
CRUSH
MIX
PUREE
CHOP
POWERMIX
BLEND
CRUSH
MIX
PUREE
CHOP
WARNING: Handle the Hybrid Edge
Blades Assembly with care, as the blades are
loose and sharp.
WARNING: Remove utensils prior to
processing. Failure to remove may cause the
Power Nutri Cup to be damaged or to shatter,
which may cause personal injury.
WARNING: Do not blend hot, eervescent,
or carbonated liquids. Doing so may cause
excessive pressure buildup, resulting in risk
of laceration and/or the user being burned.
WARNING: Remove the Hybrid Edge
Blades Assembly from the Power Nutri Cup upon
completion of blending. Do not store ingredients
before or after blending them in the cup with the
blade assembly attached. Some foods may
contain active ingredients or release gases that
will expand if left in a sealed container, resulting
in excessive pressure buildup that can pose a risk
of injury.
ninjakitchen.com.au | ninjakitchen.co.nzAUS +61 2 8801 7666 | NZ +64 800 112 660
CLEANING
Hand-Washing
Wash containers, lids and blade assembly
in warm, soapy water. Use a dishwashing
utensil with handle to avoid direct contact
with the blades. Exercise care when handling
the blade assembly as the blades are sharp.
Thoroughly rinse and air-dry all parts.
STUCK-ON INGREDIENTS IN THE
POWER NUTRI JUG & CUP
For stuck-on ingredients, such as nut
butter, rinse the jug and blade assembly
under warm water.
Next, fill the jug or cup with warm water up
to liquid fill or halfway on the cup and add
1–2 small drops of washing-up liquid.
Screw on the blade assembly and press
MIX. Twist the Power Paddle anti-clockwise
continuously while cleaning.
Then, empty contents and rinse under
warm water and wipe with a dishwashing
utensil, if needed.
12 13
CARE & MAINTENANCE
Dishwasher
Accessories are top-rack dishwasher safe
and should NOT be cleaned with a heated
dry cycle. Ensure the blade assembly and
lid are removed from the container before
placing in the dishwasher.
Motor Base
Unplug the unit before cleaning. Wipe
motor base with a clean, damp cloth. DO
NOT use abrasive cloths, pads or brushes
to clean the base.
STORAGE
For cord storage, wrap cord with hook-
and-loop fastener near the back of the
motor base. DO NOT wrap the cord around
the bottom of the base for storage.
DO NOT store blended or unblended
ingredients in the cup or jug with the blade
assembly attached. Use only the spout
lid when storing blended or unblended
ingredients in the containers.
DO NOT stack items on top of the containers.
Store any remaining attachments alongside
the unit or in a cabinet where they will not be
damaged or create a hazard.
RESETTING THE
MOTOR THERMOSTAT
This unit features a safety system that
prevents damage to the motor and drive
system should you inadvertently overload
it. If the unit is overloaded, the motor will
be temporarily disabled. Should this occur,
follow the reset procedure below.
1 Unplug the unit from the
electrical socket.
2 Allow the unit to cool for approximately
15 minutes.
3 Remove the blade assembly from the
container. Empty the container and
ensure no ingredients are jamming the
blade assembly.
IMPORTANT: Ensure that maximum
capacities are not exceeded. This is the
most typical cause of appliance overload.
NOTE: The Power Paddle in the Power
Nutri Jug is not removable.
NOTE: For best results, use a dishwasher
to remove stuck-on ingredients.
1 SMALL DROP OF WASHING-
UP LIQUID
FILL WATER HALFWAY
FILL WATER TO
240ml LIQUID FILL
1 OR 2 SMALL DROPS OF WASHING-
UP LIQUID
TROUBLESHOOTING GUIDE
WARNING: To reduce the risk of shock and unintended operation, turn power o and unplug
unit before troubleshooting.
Display reads “- -”.
• If vessel is properly installed and the display reads ‘- -’, ensure the interior of the base
area is clean of any debris.
Control panel does not illuminate.
• Make sure unit is plugged in. If the unit is powered on and no container is installed, the
unit will display ‘- -’. The available programs will illuminate after placing a container on
base and rotating it clockwise until it clicks into place.
Control panel doesn’t turn o.
• Remove container from base by rotating it anti-clockwise and lifting it up. The display
with flash ‘- -’. Unplug the power cord from the socket. If the unit remains plugged in,
the display will time out after 3 minutes of inactivity. Press any button to wake the unit.
Doesn’t mix well; ingredients get stuck.
• Using the Auto-iQ programs is the easiest way to achieve great results. The pulses and
pauses allow the ingredients to settle toward the blade assembly. If ingredients are
routinely getting stuck, adding some liquid will usually help.
• When filling the cup, start with fresh fruit or vegetables, then leafy greens or herbs.
Next add liquids or yoghurt, then seeds, powders or nut butters. Finally, add ice or
frozen ingredients.
• If using the Power Nutri Jug, during the blending process twist the Power Paddle anti-
clockwise continuously to circulate ingredients.
Unit moves on worktop while blending.
• Ensure the suction cup feet are clean and dry. Place the motor base on a smooth, clean
and level surface. Do not place motor base on a rough or unlevel surface as the suction
cup feet will not adhere properly.
Unit is dicult to remove from worktop for storage.
• If the motor base is dicult to remove from the worktop or table, slide it across the
surface, then lift. Tilt the motor base to disengage the suction feet.
Lid or Hybrid Edge Blades Assembly is hard to install on the container.
• Set the container on a level surface. Carefully place the lid or blade assembly on the
top of the container and align the threads so the lid/blade assembly sits flat. Twist
clockwise until you have a tight seal.
Can’t remove the Power Paddle from the Power Nutri Jug Lid.
• The Power Paddle in the Power Nutri Jug Lid is not removable. For cleaning
instructions, refer to the Cleaning section.
ORDERING REPLACEMENT PARTS
To order additional parts and attachments, visit ninjakitchen.com.au | ninjakitchen.co.nz
ninjakitchen.com.au | ninjakitchen.co.nzAUS +61 2 8801 7666 | NZ +64 800 112 660 14 15
NOTES
For warranty claims, you will need to submit a proof of purchase in the form of a valid receipt
that displays date and place of purchase. This warranty does not replace but is in addition to your
statutory rights.
If your product becomes defective due to faulty material or workmanship within a period of
one (1) year from the date of purchase, we warrant to do the following:
• For New Zealand Consumers: We will replace the defective/faulty part with a new product,
free of charge, or if the unit is deemed defective/faulty we replace the unit with an
equivalent or upgraded model, at our discretion.
• For Australian Consumers: Our goods come with guarantees that cannot be excluded under
the Australian Consumer Law. You are entitled to a replacement or refund for a major failure
and for compensation for any other reasonably foreseeable loss or damage. You are also
entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality
and the failure does not amount to a major failure.
Replacement items will be covered by the limited warranty for the balance of the warranty period
from the date of the original purchase.
Your warranty is subject to the following conditions
• DO NOT operate the appliance with a damaged plug or cord, or if the unit has been dropped,
damaged or dropped in water.
• To avoid the risk of electric shock, do not disassemble or attempt to repair the appliance on
your own. If the supply cord is damaged, it must be replaced by a qualified electrician to avoid
a hazard. Incorrect re-assembly or repair can cause a risk of electric shock or injury to persons
when the appliance is used.
• The item has not been misused, abused, neglected, altered, modified or repaired by anyone.
• The item has been subjected to fair wear and tear.
• The item has not been used for trade, professional or hire purposes.
• The item has not sustained damage through foreign objects, substances or accident
Customer costs within warranty
The customer is responsible for any inwards freight charge to return a product for warranty if
requested, and outward freight charge for warranty parts and or replacement unit.
Who is covered?
This warranty applies only to the original purchaser, who bought the product from an authorised
retailer and may not be transferred. Proof of purchase is required.
What is not covered?
• Accessories supplied with the item.
• Components that are subject to natural wear and tear caused by normal use in accordance with
operating instructions.
• Unauthorised/improper maintenance/handling or overload is excluded from this warranty.
ONE (1) YEAR LIMITED WARRANTY
Proudly distributed by
Mann & Noble Pty Ltd
Building D, 33 Quarry Road
Erskine Park NSW, Australia, 2759
AU 02 8801 7666 | NZ 0800 112 660
AU ninjakitchen.com.au | NZ ninjakitchen.co.nz
Illustrations may dier from actual product. We are constantly striving to improve our products, therefore the
specifications contained herein are subject to change without notice.
AUTO-IQ and NINJA are registered trademarks of SharkNinja Operating LLC.
BLENDER DUO, HYBRID EDGE, POWER NUTRI, and TWISTI are trademarks of SharkNinja Operating LLC.
© 2023 SharkNinja Operating LLC
CB150ANZ�IB�MP�Mv6
VISIT US ONLINE AT:
AU ninjakitchen.com.au NZ ninjakitchen.co.nz
Or follow us on our social media pages:
@ninjakitchenau | @ninjakitchennz
