BAUMR-AG MOWCLSBM520A 520CX 40V Cordless Lawn Mower Kit User Manual

THE BATTERY MAY HAVE SOME CHARGE ON ARRIVAL, IT IS IMPORTANT

HOWEVER THAT THE BATTERY IS CHARGED PRIOR TO USE.

User Manual

[Revision 2.0]

READ THIS MANUAL CAREFULLY BEFORE USE – FAILURE TO DO SO MAY RESULT IN INJURY, PROPERTY DAMAGE AND MAY

VOID WARRANTY. • KEEP THIS MANUAL FOR FUTURE REFERENCE. • Products covered by this manual may vary in

appearance, assembly, inclusions, specifications, description, and packaging.

520CX Lawn Mower

E&OE © Baumr-AG 2

Safety

Safety messages are designed to alert you to possible dangers or hazards that could cause death, injury or

equipment or property damage if not understood or followed. Safety messages have the following symbols:

You WILL be KILLED or

SERIOUSLY INJURED if you do

not follow instructions.

You CAN be KILLED or

SERIOUSLY INJURED if you do

not follow instructions.

You CAN be INJURED if you do

not follow instructions or equipment

damage may occur.

It is vital that you read and understand this

user manual before using the product,

including safety warnings, and any assembly

and operating instructions. Keep the manual

for future reference.

Safety precautions and recommendations

detailed here must be fully understood and

followed to reduce the risk of injury, fire,

explosion, electrical hazard, and/or property

damage.

Safety information presented here is generic

in nature – some advice may not be

applicable to every product. The term

"equipment" refers to the product, be it

electrical mains powered, battery powered or

combustion engine powered.

• Before Use - If you are not familiar with the

safe operation/handling of the equipment or

are in any way unsure of any aspect of

suitability or correct use for your

application, you should complete training

conducted by a person or organization

qualified in safe use and operation of this

equipment, including fuel/electrical handling

and safety.

• Do NOT operate the equipment in

flammable or explosive environments, such

as in the presence of flammable liquids,

gases, or dust. The equipment may create

sparks or heat that may ignite flammable

substances.

• Keep clear of moving parts.

• Equipment may be a potential source of

electric shock or injury if misused.

• Do NOT operate the equipment if it is

damaged, malfunctioning or is in an

excessively worn state.

• Do NOT allow others to use the equipment

unless they have read this manual and are

adequately trained.

• Keep packaging away from children - risk

of suffocation! Operators must use the

equipment correctly. When using the

equipment, consider conditions and pay

due care to persons and property.

General Work Area Safety

• Wor

k areas should be clean and well it.

• Do not operate the equipment if

bystanders, animals etc are within

operating range of the equipment or the

general work area.

• If devices are provided for connecting dust

extraction / collection facilities, ensure

these are connected and used properly.

Dust collection can reduce dust-related

hazards.

General Personal Safety

• Wear

appropriate protective equipment

when operating, servicing, or when in the

operating area of the equipment to help

protect from eye and ear injury, poisoning,

burns, cutting and crush injuries. Protective

equipment such as safety goggles,

respirators, non-slip safety footwear, hard

hat, hearing protection etc should be used

for appropriate equipment / conditions.

Other people nearby should also wear

appropriate personal protective equipment.

Do not wear loose clothing or jewellery,

which can be caught in moving parts. Keep

hair and clothing away from the equipment.

• Stay alert and use common sense when

operating the equipment. Do not over-

reach. Always maintain secure footing and

balance.

• Do not use the equipment if tired or under

the influence of drugs, alcohol, or

medication.

• This equipment is not intended for use by

persons with reduced physical, sensory, or

mental capabilities.

General Fuel Safety

• P

etrol/fuel/gasoline is extremely flammable

– keep clear of naked flames or other

ignition sources.

• Do not spill fuel. If you spill fuel, wipe it off

the equipment immediately – if fuel gets on

your clothing, change clothing.

• Do NOT smoke near fuel or when

refuelling.

• Always shut off the engine before

refuelling.

• Do NOT refuel a hot engine.

• Open the fuel cap carefully to allow any

pressure build-up in the tank to release

slowly.

• Always refuel in well-ventilated areas.

• Always check for fuel leakage. If fuel

leakage is found, do not start, or run the

engine until all leaks are fixed.

General Carbon-Monoxide Safety

• U

sing a combustion engine indoors CAN

KILL IN MINUTES. Engine exhaust

contains carbon-monoxide – a poison you

cannot smell or see.

• Use combustion engines OUTSIDE only,

and far away from windows, doors, and

vents.

General Equipment Use and Care

• K

eep packaging away from children and

pets, potential risk of suffocation or

choking.

• The equipment is designed for domestic

use only.

• Handle the equipment safely and carefully.

• Before use, inspect the equipment for

misalignment or binding of moving parts,

loose components, damage, or any other

condition that may affect its operation. If

damaged, have the equipment repaired by

an authorised service centre or technician

before use.

• Prevent unintentional starting of the

equipment - ensure equipment and power

switches are in the OFF position before

connecting or moving equipment. Do not

carry equipment with hands or fingers

touching any controls. Remove any tools or

other items that are not a part of the

equipment from it before starting or

switching on.

• Do not force the equipment. Use the

correct equipment for your application.

Equipment will perform better and be safer

when used within its design and usage

parameters.

• Use the equipment and accessories etc. in

accordance with these instructions,

considering working conditions and the

work to be performed. Using the equipment

for operations different from those intended

could result in hazardous situations.

• Always keep equipment components

(engines, hoses, handles, controls, frames,

housings, guards etc) and accessories

(cutting tools, nozzles, bits etc) properly

maintained. Keep the equipment clean and,

where applicable, properly lubricated.

• Store the equipment out of reach of

children or untrained persons. To avoid

burns or fire hazards, let the equipment

cool completely before transporting or

storing. Never place or store the equipment

near flammable materials, combustible

gases, or liquids etc.

• The equipment is not weather-proof, and

should not be stored in direct sunlight, at

high ambient temperatures or locations that

are damp or humid.

• Do not clean equipment with solvents,

flammable liquids, or harsh abrasives.

• For specific equipment safety use and care,

see Equipment Safety.

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

520CX Lawn Mower

E&OE © Baumr-AG 3

General Electrical Safety

• I

nspect electrical equipment, extension

cords, power bars, and electrical fittings for

damage or wear before each use. Repair or

replace damaged equipment immediately.

• Ensure all power sources conform to

equipment voltage requirements and are

disconnected before connecting or

disconnecting equipment.

• When wiring electrically powered

equipment, follow all electrical and safety

codes.

• Always use a Residual Current Device

(RCD) (GFCI) / Earth Leakage Circuit

Breaker / Safety Switch when operating this

item (electrical items only).

• High voltage / high current power lines may

be present. Use extreme caution to avoid

contact or interference with power lines.

Electrical shock can be fatal.

General Electrical Safety

• E

lectrically grounded equipment must have

an approved cord and plug and be

connected to a grounded electrical outlet.

• Do NOT bypass the ON/OFF switch and

operate equipment by connecting and

disconnecting the electrical cord.

• Do NOT use equipment that has exposed

wiring, damaged switches, covers or

guards.

• Do NOT use electrical equipment in wet

conditions or in damp locations.

• Do NOT use electrical cords to lift, move or

carry equipment.

• Do NOT coil or knot electrical cords, and

ensure electrical cords are not trip hazards.

General Service Information

• T

he equipment must be serviced or

repaired at authorised service centres by

qualified personnel only.

• Replacement parts must be original

equipment manufacturer (OEM) to ensure

equipment safety is maintained.

• Do NOT attempt any maintenance or repair

work not described in this manual.

• After use, the equipment and components

may still be hot – allow the equipment to

cool and disconnect spark plugs and/or

electrical power sources and/or batteries

from it before adjusting, changing

accessories, or performing repair or

maintenance.

• Do NOT adjust while the equipment is

running.

• Perform service-related activities in suitable

conditions, such as a workshop.

• Replace worn, damaged or missing

warning/safety labels immediately.

Child Choking Hazard!

• W

ARNING: CHOKING HAZARD - CHILDREN UNDER 8 YRS. CAN CHOKE OR SUFFOCATE ON SMALL PARTS. ADULT

SUPERVISION REQUIRED.

• Carefully inspect anything a baby or child could gain access to, including this product & packaging.

• Dangers include anything of a size that could become stuck or lodged in a baby or child's airway.

• Dangers include things like raw, hard fruit and vegetable pieces, large pieces of meat, bones or sausage skins, popcorn, nuts,

hard lollies and corn chips, small magnets and batteries, coins, beads, marbles and small uninflated balloons, broken toys and smaller toys,

buttons, keys, and coins. But there are also many more.

• Pay particular attention to accessories, nuts, bolts, screws, washers, caps, covers, loose parts, parts that could be removed or break off, pieces

of packaging, staples, tape etc.

• In the case of any doubt, secure the item of concern in an appropriate manner, or completely remove the possibility of access by a baby or child.

HAZARDOUS COMPONENTS!

• BE

AWARE THAT THE EQUIPMENT MAY INCLUDE HAZARDOUS COMPONENTS, SUCH AS BLADES, HOT SURFACES AND MOVING

PARTS.

• MOVING BLADES CAN CAUSE SERIOUS INJURY AND EVEN DEATH IF USED IMPROPERLY OR WITHOUT SUFFICIENT PPE.

• DO NOT USE THIS EQUIPMENT ON UNEVEN SURFACES AND ALWAYS MAINTAIN GOOD BALANCE WHEN USING THIS EQUIPMENT.

FAILURE TO DO SO MAY CAUSE SERIOUS INJURY.

• MAINTAIN A SECURE GRIP OF THE TRIGGER ASSEMBLY AT ALL TIMES.

Specified Conditions of Use

• T

he cordless lawn mower is designed to cut small to medium-sized grass areas in private gardens by the house or in hobby gardens. Due to the

physical danger to the user and others, the lawn mower may not be used for other purposes.

• WARNING! RISK OF INJURY! THE MOWER MUST NOT BE USED FOR CUTTING BUSHES, HEDGES, AND THICKETS, FOR CUTTING

AND MULCHING CREEPERS OR LAWNS ON ROOFS OR IN BALCONY BOXES. THE MOWER MUST ALSO NOT BE USED AS A

CRUSHER FOR MULCHING TREE CUTTINGS AND HEDGES OR FOR LEVELLING ANY TERRAIN ROUGHNESS.

• Do not use this product in any way other than stated for normal use. Failing to observe general regulations and instructions from this manual

does not make the manufacturer liable for damages.

• Please note that permissible uses for the tool could be limited by national regulations. It is necessary to comply with the regulations applicable in

the country where the tool is used.

• Do not use the device near flammable liquids or gases. There is a risk of fire and explosion in the event of a short circuit.

General Power Tool Safety Warnings

• B

efore using the appliance, familiarise yourself with the control elements and how to use the appliance properly. Abide by all the safety measures

stated in the service manual. Act responsibly towards third parties.

• The operator is responsible for accidents or risks to third parties.

• In case of any doubts about connection and operation, please refer to our customer centre.

• WARNING: READ ALL SAFETY WARNINGS, INSTRUCTIONS, ILLUSTRATIONS, AND SPECIFICATIONS PROVIDED WITH THIS POWER

TOOL. FAILURE TO FOLLOW ALL INSTRUCTIONS LISTED BELOW MAY RESULT IN ELECTRIC SHOCK, FIRE, AND/OR SERIOUS

INJURY.

• Save all warnings and instructions for future reference.

• The term "power tool" in the warnings refers to both your mains-operated (corded) power tool and battery-operated (cordless) power tool.

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

520CX Lawn Mower

E&OE © Baumr-AG 4

Work Area Safety

• K

eep the work area clean and well lit. Cluttered or dark areas invite accidents.

• Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks

which may ignite the dust or fumes.

• Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.

Electrical Safety

• P

ower tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools.

Unmodified plugs and matching outlets reduce the risk of electric shock.

• Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges, and refrigerators. There is an increased risk of electric

shock if your body is earthed or grounded.

• Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.

• Do not abuse the cord. Never use the cord for carrying, pulling, or unplugging the power tool. Keep the cord away from heat, oil, sharp edges, or

moving parts. Damaged or entangled cords increase the risk of electric shock.

• When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of

electric shock.

• If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces the

risk of electric shock.

Personal Safety

• S

tay alert, watch what you are doing, and use common sense when operating a power tool. Do not use a power tool while you are tired or under

the influence of drugs, alcohol, or medication. A moment of inattention while operating power tools may result in serious personal injury.

• Use personal protective equipment. Always wear eye protection. Protective equipment such as a dust mask, non-skid safety shoes, hard hat, or

hearing protection used for appropriate conditions will reduce personal injuries.

• Prevent unintentional starting. Ensure the switch is in the off position before connecting to the power source and/or battery pack, picking up, or

carrying the tool. Carrying power tools with your finger on the switch or energising power tools with the switch on invites accidents.

• Remove any adjusting key or wrench before turning the power tool on. A wrench or key left attached to a rotating part of the power tool may

result in personal injury.

• Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.

• Dress properly. Do not wear loose clothing or jewellery. Keep your hair and clothing away from moving parts. Loose clothes, jewellery, or long

hair can be caught in moving parts.

• If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust

collection can reduce dust-related hazards.

• Do not let familiarity gained from frequent use of tools allow you to become complacent and ignore tool safety principles. A careless action can

cause severe injury within a fraction of a second.

Power Tool Use and Care

• D

o not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for

which it was designed.

• Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must

be repaired.

• Disconnect the plug from the power source and/or remove the battery pack, if detachable, from the power tool before making any adjustments,

changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.

• Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the

power tool. Power tools are dangerous in the hands of untrained users.

• Maintain power tools and accessories. Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may

affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power

tools.

• Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.

• Use the power tool, accessories, and tool bits, etc., in accordance with these instructions, taking into account the working conditions and the work

to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.

• Keep handles and grasping surfaces dry, clean, and free from oil and grease. Slippery handles and grasping surfaces do not allow for safe

handling and control of the tool in unexpected situations.

Battery Tool Use and Care

• R

echarge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire

when used with another battery pack.

• Use power tools only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire.

• When the battery pack is not in use, keep it away from other metal objects like paper clips, coins, keys, nails, screws, or other small metal objects

that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire.

• Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If the liquid

contacts eyes, seek medical help. Liquid ejected from the battery may cause irritation or burns.

• Do not use a battery pack or tool that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behaviour resulting in

fire, explosion, or risk of injury.

• Do not expose a battery pack or tool to fire or excessive temperature. Exposure to fire or temperatures above 130°C may cause an explosion.

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

520CX Lawn Mower

E&OE © Baumr-AG 5

• Follow all charging instructions and do not charge the battery pack or tool outside the temperature range specified in the instructions. Charging

improperly or at temperatures outside the specified range may damage the battery and increase the risk of fire.

Service

• H

ave your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power

tool is maintained.

• Never service damaged battery packs. Service of battery packs should only be performed by the manufacturer or authorised service providers.

Other Safety Reminders

• T

he device must not be used by children. This device can be used by persons with reduced physical, sensory, or mental capabilities, or a lack of

experience and knowledge if they are supervised or have been instructed in the safe use of the device and understand the resulting dangers.

Children are not allowed to play with the device. Cleaning and user maintenance must not be carried out by children.

• Read and understand the operating instructions before using the appliance. Familiarise yourself with the control elements and how to use the

appliance properly. Abide by all the safety measures stated in the service manual.

• Act responsibly towards third parties. Remember that the machine operator or user is responsible for accidents involving other people or their

property.

• Never allow children or people unfamiliar with these instructions to use the lawn mower. Local regulations may stipulate the minimum age of the

user.

• Keep children and other persons, including animals, at a safe distance when using the appliance.

• Persons over 16 years of age can only operate the appliance. An exception includes youngsters trained to gain knowledge under the supervision

of a trainer during occupational education.

• DANGER! WARNING: THIS POWER TOOL GENERATES AN ELECTROMAGNETIC FIELD DURING OPERATION. UNDER CERTAIN

CIRCUMSTANCES, THIS FIELD MAY AFFECT ACTIVE OR PASSIVE MEDICAL IMPLANTS. TO REDUCE THE RISK OF SERIOUS OR

FATAL INJURY, WE RECOMMEND THAT INDIVIDUALS WITH MEDICAL IMPLANTS CONSULT THEIR PHYSICIAN AND THE

MANUFACTURER OF THE MEDICAL IMPLANT BEFORE OPERATING THE MACHINE.

• WARNING: WEAR PERSONAL PROTECTIVE EQUIPMENT.

• ALWAYS WEAR GOGGLES WHEN USING THE MACHINE.

• WEAR EAR PROTECTORS!

• WEAR SOLID SHOES AND LONG TROUSERS.

• AVOID WEARING LOOSE CLOTHING OR CLOTHING WITH HANGING STRINGS OR BELTS. HAIR, CLOTHING, AND GLOVES MUST

BE KEPT AWAY FROM MOVING PARTS, AS THEY COULD GET CAUGHT BY THE ROTATING PARTS. DO NOT USE THE APPLIANCE

WHEN BAREFOOT OR WEARING OPEN SANDALS.

• USE PROTECTIVE GLOVES WHEN HANDLING THE BLADES.

• Carefully check the terrain where the appliance is going to be used and remove all objects that could get caught or thrown by the appliance, such

as stones, branches, wires, or animals.

• Before using, always visually inspect the blades, blade bolts, and cutter assembly to ensure they are not blunt, worn, or damaged. Replace worn

or damaged blades and bolts in sets to maintain balance. Worn or damaged cutting blades and fastening bolts must only be replaced in sets to

avoid imbalance.

• Do not use the appliance if you are tired, ill, or under the influence of drugs, alcohol, or medication.

• Do not overreach. Maintain proper footing and balance at all times. Be careful when going backwards—risk of tripping!

• Ensure adequate lighting or good lighting conditions when working with the machine, as poor lighting presents a significant safety risk.

• Avoid operating the equipment on wet grass where possible.

• Walk, never run! Only operate the machine at a walking pace.

• Make sure your posture is stable, especially on slopes. Do not mow on overly steep slopes. Be particularly careful when changing direction on

slopes.

• Mow across the slope, never up or down.

• Pay maximum attention when turning around and pulling the appliance towards you.

• Be especially cautious when changing the direction of travel on a slope.

• Do not mow on excessively steep slopes.

• Stop the cutting blade(s) if the lawn mower needs to be tilted for transport over surfaces other than grass, and when the lawn mower is being

moved to and from the area to be mowed.

• Never use the lawn mower with damaged protective devices or grids, or without attached protective devices, such as baffles and/or grass

catchers.

• Start or operate the starter switch carefully according to the manufacturer’s instructions. Ensure there is sufficient distance between your feet and

the cutting blade(s).

• The lawn mower must not be tilted when starting or operating the engine unless the lawn mower must be raised during the process. In this case,

tilt it only as far as is absolutely necessary and lift only the side away from the user.

• Never put your hands or feet on or under rotating parts. Always stay clear of the discharge opening.

• Never lift or carry a lawn mower while the engine is running.

• WARNING! RISK OF INJURY! ROTATING BLADES CAN CAUSE SERIOUS INJURIES, INCLUDING CUTTING OR AMPUTATING PARTS

OF THE BODY.

• SWITCH THE MOWER OFF WHENEVER CARRYING OR INCLINING IT, OR WHEN OUTSIDE A GRASS AREA. WAIT UNTIL ALL

ROTATING PARTS HAVE STOPPED.

• ALL PROTECTIVE COVERS AND SAFETY DEVICES MUST BE CORRECTLY ATTACHED TO OPERATE THE DEVICE.

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

520CX Lawn Mower

E&OE © Baumr-AG 6

• NEVER REMOVE THE COLLECTION BAG WHILE THE MACHINE IS IN OPERATION.

• DO NOT START THE ENGINE UNTIL YOUR FEET ARE AT A SAFE DISTANCE FROM THE CUTTING TOOLS.

• DO NOT INCLINE THE APPLIANCE WHEN STARTING.

• DO NOT START THE APPLIANCE WHILE STANDING IN FRONT OF THE EJECTION OPENING.

• NEVER TOUCH BENEATH THE HOUSING BODY WHILE THE ENGINE IS RUNNING. ALWAYS KEEP A SAFE DISTANCE FROM THE

EJECTION OPENING.

• ANY WORK OR ADJUSTMENTS ON THE MACHINE MUST ONLY BE PERFORMED WITH THE ENGINE SWITCHED OFF, THE

CONTACT KEY REMOVED, AND THE MOWING BLADE STATIONARY.

• WARNING! RISK OF INJURY! THROWN STONES OR SOIL MAY CAUSE INJURIES.

• BEFORE MOWING, CHECK THE AREA TO BE MOWED FOR ANY UNDESIRABLE OBJECTS.

• ENSURE THE COLLECTION BAG IS PROPERLY SECURED.

• WEAR SAFETY GOGGLES WHILE WORKING.

• Stop the machine and remove the contact key. Wait until all rotating parts have stopped and the unit has cooled down. Always remove the key

whenever you leave the lawnmower or before loosening or clearing blockages in the discharge channel.

• Release a blocked blade.

• Clean the mower or perform any other tasks before inspecting the mower.

• Check the machine to ensure it is working properly after hitting an undesirable object. Repairs must be made before putting the machine back

into operation.

• If the appliance begins vibrating abnormally, switch the engine off immediately and investigate the cause. Generally, vibrations signal an

operational failure.

• The appliance must not be used if damaged or if safety equipment is defective. Replace any worn or damaged parts. If the lawnmower begins to

vibrate abnormally, it is crucial to inspect it immediately by following these steps:

• Look for damage.

• Make the necessary repairs to damaged parts.

• Ensure that all nuts, bolts, and screws are firmly tightened.

• The ON/OFF switch and safety switch must not be locked.

• When working with this machine, do not use spare parts other than those recommended by the manufacturer. Using non-recommended spare

parts can result in serious injuries or damage to the machine.

• Despite following the operating instructions, some hidden residual risks may remain:

• Ensure that all nuts, bolts, and screws are tight, and that the device is in a safe working condition.

• Regularly check the grass catcher for wear or loss of functionality.

• For safety reasons, replace worn or damaged parts.

• On machines with multiple cutting blades, the movement of one cutting blade can cause the others to rotate.

• When setting the machine, ensure no fingers are trapped between moving cutting blades and stationary parts.

• Allow the engine to cool down before switching off the machine.

• When servicing the cutting blades, be aware that the blades may move even when the power source is switched off.

• For safety reasons, replace worn or damaged parts and use only original spare parts and accessories.

• The appliance must be stored in a dry place, protected from frost.

• Lock the device in a secure place to protect it from unauthorised use.

• Allow the engine to cool down before storing the device in a closed room.

• CAUTION! DAMAGE TO HEALTH CAN ARISE FROM VIBRATIONS TO THE HANDS AND ARMS IF THE DEVICE IS USED FOR AN

EXTENDED PERIOD OR IF THE DEVICE IS NOT PROPERLY GUIDED AND EVALUATED.

• Vibration damping systems are not a guaranteed protection against white finger disease or carpal tunnel syndrome. Therefore, it is important to

carefully monitor the condition of your fingers and wrists if you regularly use the appliance for long periods. If any symptoms of the above-

mentioned conditions appear, seek medical advice immediately.

• To reduce the risk of white finger disease, keep your hands warm and take regular breaks during your work.

• CAUTION! HEARING DAMAGE! EXTENDED EXPOSURE TO THE IMMEDIATE VICINITY OF THE RUNNING UNIT MAY CAUSE HEARING

DAMAGE. WEAR EAR PROTECTORS!

• When working with the device, a certain level of noise is unavoidable. Noisy work should be scheduled for times allowed by statute or other

local regulations. Adhere to any applicable rest periods and limit your working time to the necessary minimum.

• For your personal protection and the protection of those nearby, suitable hearing protection must be worn.

• Noise emission information in accordance with the German Product Safety Act (ProdSG) and the EC Machine Directive: the noise pressure

level at the place of work can exceed 80 dB(A). In such cases, the operator will require noise protection (e.g. wearing ear protectors).

• Please also consider any local regulations concerning noise protection.

Declared Vibration Emissions

• W

ARNING: THE DECLARED VIBRATION EMISSION LEVEL REPRESENTS THE MAIN APPLICATIONS OF THE TOOL. HOWEVER, IF THE

TOOL IS USED FOR DIFFERENT APPLICATIONS, WITH DIFFERENT ACCESSORIES, OR POORLY MAINTAINED, THE VIBRATION

EMISSION MAY DIFFER. THIS MAY SIGNIFICANTLY INCREASE THE EXPOSURE LEVEL OVER THE TOTAL WORKING PERIOD.

• The vibration emission level will vary depending on how the power tool is used and may increase above the level provided in this information

sheet.

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

520CX Lawn Mower

E&OE © Baumr-AG 7

• The vibration emission level may be used to compare one tool with another and can serve as a preliminary assessment of exposure.

• An accurate estimate of the vibratory load should also consider the times when the tool is shut down or running but not in use. This can

significantly reduce the vibratory load over the total working period.

• Identify additional safety measures to protect the operator from the effects of vibration, such as maintaining the tool and its accessories, keeping

hands warm, and organising work patterns.

Proper Disposal

• D

o not dispose of electric tools, batteries, or rechargeable batteries with household waste. Electric tools and batteries that have reached the end

of their life must be collected separately and returned to an environmentally compatible recycling facility. Check with your local authority or retailer

for recycling advice and collection points.

• If your device becomes unusable in the future or you no longer need it, do not dispose of it with your household rubbish. Instead, dispose of it in

an environmentally friendly manner.

• Please take the device to an appropriate collection or recycling point. This allows plastic and metal parts to be separated and recycled.

Information regarding the disposal of materials and devices is available from your local administration.

• Batteries must not be disposed of in general rubbish. As a consumer, you are legally obliged to return used batteries and accumulators. At the

end of the lifespan of your device, the batteries or accumulators must be removed from the device and disposed of separately. You can take your

old batteries and accumulators to local collection points in your municipality, your dealer, or distribution centres.

• Dispose of the batteries when they are discharged. We recommend applying adhesive tape to the poles to protect them from short-circuiting.

Never open the battery.

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

520CX Lawn Mower

E&OE © Baumr-AG 8

Safety Symbols

The product may have safety warning labels attached to it, explained below. Understand the symbols on your

product and their meanings. If any stickers become unreadable, unattached etc., replace them.

Flammable Material Hazard

Flammable liquids, gases, or

substances etc may present.

Avoid ignition sources and open

flames. Danger of fire.

Read User Manual

Read and fully understand

product safety warnings,

operation, procedures etc before

using the product.

Use Hand Protection

Wear appropriate hand protection

and take due care as the product

or use of the product may present

hand hazards.

Carbon-Monoxide Hazard

Do not use the product in

confined areas or without

adequate ventilation. Carbon-

monoxide poisoning can be fatal.

Electrocution / Electrical Shock

Hazard

High voltage or high current

electricity may be present or

required by the product. Take

due care when handling electrical

products, cables, plugs and

leads. Electrical shock can be

fatal.

Toxic Fumes / Dust Hazard

Using the product or by-products

from use may produce fumes,

smoke or particles that could be

harmful if inhaled. Wear

appropriate breathing protection

and have adequate ventilation.

Explosive Material Hazard

Combustible liquids, gases, or

substances etc may be present.

Avoid ignition sources and open

flames. Danger of explosion.

Cutting / Amputation Hazard

The product may have blades,

edges or mechanical devices that

can cause severe cut injury to

fingers, limbs etc. Take due care

when handling and using the

product.

Crush Hazard

The product may have blades,

edges or mechanical devices that

can cause severe crush injury to

fingers, limbs etc. Take due care

when handling and using the

product.

Single Operator Only

The product must be operated by

a single person only. More than

one person operating the product

may introduce additional hazards.

Use Face Protection

Wear appropriate full-face

protection and take due care as

the product or use of the product

may present face and eye

hazards.

Use Foot Protection

Wear appropriate foot protection

and take due care as the product

or use of the product may present

foot hazards.

Use Eye / Ear / Head Protection

Wear appropriate eye and / or

ear and / or head protection and

take due care as the product or

use of the product may present

eye, hearing, and head hazards.

Running Hazard

Do not run on or near the product

as doing so may present a fall

hazard.

Diving Hazard

Do not dive into the product as

doing so may present a neck /

head injury hazard.

Adult Supervision Required

Always supervise children and

other users of a product to

prevent drowning or injury.

Skin Penetration / Puncture

Hazard

The product may produce

pressure, emit liquids or objects

that can cause severe injury to

fingers, limbs, blood etc. Take

due care when handling and

using the product.

Hot Surface Hazard

Be aware that the product may

produce high temperatures and

hot surfaces that can cause burn

injuries.

Flying Debris Hazard

Be aware that the product or use

of the product may present

hazards produced by flying

debris. Wear appropriate clothing

and protective devices.

Moving Parts Hazard

Be aware that the product

contains or uses mechanical

devices that move or rotate.

Always wait for moving parts to

stop fully before handling the

product, adjusting, maintenance

etc.

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

520CX Lawn Mower

E&OE © Baumr-AG 9

Carbon-Monoxide Hazard

Do not use the product in

confined areas or without

adequate ventilation. Carbon-

monoxide poisoning can be fatal.

Pull Hazard

Be aware that the product

contains or uses mechanical

devices that can pull in objects

and can cause severe injury to

fingers, limbs etc. Take due care

when handling and using the

product.

Slope / Fall Injury Hazard

Be aware that using the product

on sloping surfaces or in slippery

conditions may present additional

dangers from falls and contact

with blades, moving parts, hot

surfaces etc.

"Slam Dunk" Warning

Do NOT attempt "slam dunk"

manoeuvres as this may result in

severe injury due to falling,

product breakage or collapse etc.

Electrocution / Electrical Shock

Hazard - Outdoor

High voltage or high current

electricity may be present or

required by the product. Do NOT

use in rain, damp, or wet

conditions. Electrical shock can

be fatal.

Electrocution / Electrical Shock

Hazard - Disconnect

High voltage or high current

electricity may be present or

required by the product. Always

disconnect the product from the

electrical supply before handling

the product, adjusting,

maintenance etc.

Power Line Electrocution

Hazard

High voltage / high current power

lines may be present. Use

extreme caution to avoid contact

or interference with power lines.

Electrical shock can be fatal.

"Kick-Back" Hazard

High level of "kick-back" hazard

that can cause the machine to

suddenly rotate towards operator.

Kick-back injury can be fatal.

Winch Operator Position

Hazard

Do NOT stand between winch

and load. Do NOT use winch to

move people.

Winch Lift Hazard

Do NOT LIFT load vertically. Use

machine to PULL only.

Cable Hazard

Ensure that load bearing cable is

not kinked or knotted.

Winch Cable Hazard

Ensure that there is a minimum

number of cable coils on

winching mechanism.

Winch Hook Hazard

Carry hook to load – do NOT

throw or run.

Flash / Blinding Hazard

Wear appropriate eye protection

for welding. Direct exposure to

weld arcs may cause permanent

eye injury.

Laser Hazard

Laser may be in use – do NOT

look directly at laser or allow

others to.

Choking Hazard

Children under 8 yrs. Can choke

or suffocate on small parts. Adult

supervision required.

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

520CX Lawn Mower

E&OE © Baumr-AG 10

Table of Contents

Safety ......................................................................................................................................................... 2

Safety Symbols ........................................................................................................................................................... 8

Assembly ................................................................................................................................................. 11

Unpacking ................................................................................................................................................................. 11

Handles and Catcher ................................................................................................................................................ 12

Mulch Plug ................................................................................................................................................................ 14

Inserting and Removing the Battery ......................................................................................................................... 14

Operation ................................................................................................................................................. 16

Height Adjustment .................................................................................................................................................... 16

Operating the Mower ................................................................................................................................................ 17

Operational Safety .................................................................................................................................................... 19

Application Tips ........................................................................................................................................................ 20

Walking with Your Mower ......................................................................................................................................... 20

Emptying the Grass Catcher .................................................................................................................................... 21

Lithium Battery Care and Maintenance .................................................................................................. 22

Top 3 Battery Care Requirements ............................................................................................................................ 22

Maintenance ............................................................................................................................................. 24

Troubleshooting ...................................................................................................................................... 26

Specifications .......................................................................................................................................... 27

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

520CX Lawn Mower

E&OE © Baumr-AG 11

Assembly

Unpacking

Video Tutorial:

Catcher Assembly

Spare parts available

for purchase, scan QR

code below:

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

520CX Lawn Mower

E&OE © Baumr-AG 12

Handles and Catcher

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

520CX Lawn Mower

E&OE © Baumr-AG 13

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

520CX Lawn Mower

E&OE © Baumr-AG 14

Mulch Plug

Inserting and Removing the Battery

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

520CX Lawn Mower

E&OE © Baumr-AG 15

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

520CX Lawn Mower

E&OE © Baumr-AG 16

Operation

Height Adjustment

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

520CX Lawn Mower

E&OE © Baumr-AG 17

Operating the Mower

To start the mower, ensure both the battery and safety key are installed. Then press and hold the safety button

(1). While holding this button, use your other hand to grip any of the triggers (2) underneath the handlebars.

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

520CX Lawn Mower

E&OE © Baumr-AG 18

To stop the mower, simply release the trigger mechanism.

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

520CX Lawn Mower

E&OE © Baumr-AG 19

Operational Safety

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

520CX Lawn Mower

Application Tips

•

A medium cutting height is recommended for most lawns. Cutting too low can deteriorate the quality of the

lawn.

•

If the engine is working hard, the engine speed will drop, and the engine noise will change. Increase the

cutting height to reduce the engine load.

•

When mowing tall grass, reduce the speed at which the device is pushed.

•

Use the mulching wedge when you want the grass to remain on the lawn.

•

An overlapping working method is recommended when mowing.

•

Mow 1-2 times a week during the main growing season.

•

If the grass has grown longer than 10 cm, only reduce the grass height by half. The optimal cut length is 4

cm. Make several passes to achieve the desired result.

Walking with Your Mower

WARNING: Always observe the strictest safety procedures when using the lawnmower. Carefully read

the safety instructions in this manual before using the lawnmower.

WARNING: Never open the ejector flap when the grass bag has been detached (to be emptied) and the

engine is still running. The rotating blade can cause serious injuries!

1. Select your required setting.

2. Start the engine and allow it to run and set it to required speed.

3. Keep a firm grip on the upper handle with engine stop/start lever and drive lever (clutch lever) dosed and

walk along with its self-propelling to start mowing.

When Mowing:

•

Walk. never run with the mower. be very careful when mowing uneven or rough ground.

•

Mow across slopes. never up and down.

•

Be careful when changing the direction of the mower on a slope.

•

Do not mow excessively steep slopes.

Note: Grass clippings can clog underneath the mower deck, preventing the blades from turning. This

can overheat the engine, causing excessive wear to engine components, reducing the lawn mower's

overall lifespan or catastrophic failure of engine bearings and pistons.

Clogging occurs if you mow wet, long, or lush grass. For the best result, mow when the grass is dry

and use a whipper snipper to reduce the height of grass longer than 15cm (6”) before mowing on the

highest cutting setting.

•

Grass grows at different rates at different time of the year. Never use the lowest cutting height for the first cut

of the season or in drought conditions.

•

Only about one thirds of the grass height should be cut.

•

When mowing with the mulching function, do not cut high or wet grass to ensure that the cut grass can be

scattered efficiently. When you have been cutting for several minutes, please stop the mower, and clean the

blade and the deck.

•

Do not remove grass debris in the mower casing or on the blade by hand or with your feet. Instead, use

suitable tools such as a brush or broom.

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

520CX Lawn Mower

Emptying the Grass Catcher

A lawn mower generates significant airflow when it moves the grass into the catcher. The catcher is fitted with a

full indicator flap, which stays up if there is space inside. When the space inside the catcher is filled with grass,

the airflow is no longer enough to raise the flap. The flap will drop at this point, indicating it is time to empty the

catcher.

As soon as grass clippings start to trail the lawn mower, it is time to empty the grass catcher.

NOTE· Before taking off the grass catcher, switch off the engine and wait until the blade has come to a

stop.

1. To take off the grass catcher, use one hand to lift up the ejector flap and the other to grab onto the carry

handle. The ejector flap automatically falls down after removing the grass catcher and closes off the rear

chute opening.

2. Empty the grass catcher of grass debris and then refit grass catcher.

NOTE: If any grass residue is caught in the discharge chute, clean it using a brush. Do not remove grass

debris in the mower casing or on the blade with your hand or feet. Instead, use suitable tools such as a

brush or broom. To ensure that the cut grass can be collected into the grass catcher, the discharge

opening, and interior of the mower casing must be cleared of any blockage.

Grass catcher full

indicator flap

(example)

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

520CX Lawn Mower

Lithium Battery Care and Maintenance

Top 3 Battery Care Requirements

1. Charge battery before first use. The battery may arrive with some charge, regardless of this the

battery must be charged for 2 hours on the initial charge and 2 hours for each subsequent charge.

2. Charge battery immediately when it is depleted. Do not store a depleted battery. This will

permanently impact the life of the battery. If the battery is going to be stored for a period of time, fully

charge the battery before storing.

3. Disconnect battery when not in use. To prolong the life of a battery, disconnect it from the unit

when not in use. Disconnect chargers from the battery once charged.

To ensure the battery maintains optimum performance, follow the guidelines outlined below.

•

For best results, charge batteries in temperatures between 10°C and 30°C

•

When battery is charged, disconnect the charger from the power supply and remove the battery from the

charger.

•

If a battery is stored or otherwise unused for an extended period, and the battery has no charge remaining

when you check it, consider it to be damaged. Do not attempt to recharge it or to use it. Replace it with a

new battery.

•

Use only with the battery charger specified by the manufacturer.

•

Ensure that the battery charger electrical cord is not subjected to damage or stress. Do not operate the

battery charger if it has a damaged electrical cord or plug.

•

Do not use the charger in wet areas or expose it to rain or water.

•

The typical estimated life of a Lithium-Ion battery is about two to three years or 300 to 500 charge cycles,

whichever occurs first. One charge cycle is a period of use from fully charged, to fully discharged, and fully

recharged again.

•

Explosion hazard – protect the battery against heat, for example, direct sunlight and fire. Do not store

batteries in vehicles or locations subject to heat.

•

Batteries can explode in the presence of an ignition source, such as a pilot light. To reduce the risk of

serious personal injury, never use any cordless product in the presence of open ﬂame. Exploding batteries

can propel debris and chemicals.

•

Do not open the battery – danger of short-circuiting and/or explosion.

•

Do not attempt to destroy or disassemble the battery pack or remove any of its components.

•

Do not touch the battery terminals with metal objects and/or body parts as short-circuit and/or personal injury

may result.

•

Explosion hazard – do not open and/or short-circuit the battery.

•

Poison hazard – battery leakage (liquid ejection). Under extreme conditions, liquid may be ejected from the

battery – avoid contact. If contact accidentally occurs, immediately seek medical attention, and flush with

water. If liquid contacts eyes, immediately seek medical attention, flush with clean water for at least 10

minutes. Liquid ejected from the battery may cause irritation or burns.

•

Dispose of non-serviceable batteries in an environmentally responsible manner and according to local

regulations.

Failure to adhere to the requirements above may result in the battery becoming inoperative or battery life being

reduced. In extreme cases or abuse, battery overheating, or fire may result.

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

520CX Lawn Mower

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

520CX Lawn Mower

Maintenance

ATTENTION: Surface corrosion will occur on metal surfaces over time and the rate of oxidation depends

on factors such as proximity to the ocean and humidity or condensation of water vapour on metal

surfaces. To mitigate this, WD40 can be used to remove surface corrosion then, when applied

periodically, it will prevent rust from forming.

DANGER! Switch the appliance off and remove the contact key before performing any adjustments,

cleaning, or servicing. Wait until all rotating parts have stopped and the appliance has cooled down.

Keep hands away from all cutting edges and moving parts. Fingers can be pulled into the cutting

carriage and can be cut or crushed.

•

After each use, thoroughly clean the machine to remove all dust and debris, and repair or replace any faulty

parts.

•

Check the collection bag regularly for wear and ageing.

•

Clean the ejection opening and cover at regular intervals.

•

Keep the device, especially the air vents, clean at all times. Never spray water on the device body!

•

Never clean the machine and its components with solvents, flammable, or toxic liquids. Only use a damp

cloth for cleaning.

•

Keep all nuts, bolts, and screws tight to ensure the equipment is in safe working condition.

•

Only a regularly maintained and properly treated appliance will serve as a satisfactory aid. Insufficient

maintenance and care can lead to unforeseen accidents and injuries.

•

Repairs and work specified in these instructions should only be performed by qualified authorised staff.

•

Use only original accessories and spare parts. Using non-original parts can result in accidents or injuries to

the user. The manufacturer will not be liable for any such damage.

•

Please contact the manufacturer if you need accessories or spare parts.

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

520CX Lawn Mower

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

520CX Lawn Mower

Troubleshooting

Defect Cause Removal

The motor does not start

Battery is empty Charge the battery

Battery is defective Contact customer service

Contact key is not inserted

Refer to the instructions in these

operating instructions

Main switch or safety arch is not

controlled

Refer to the instructions in these

operating instructions

Unsteady running, strong

vibrations

Blade is damaged

Replace the blade

* Repairs and works specified in these

Instructions may only be performed by

qualified authorised staff.

Blade is loose Check and tighten the blade clamping

Poor mowing/catching

performance

Blade is blunt Have the blade sharpened or replaced

Battery is defective

Contact authorised service centre or a

qualified technician.

Collection bag is blocked Empty the collection bag

Mowing height adjustment not

regulated

Adjust the mowing height

Grass is not collected

Blocked channel Clean the ejection channel

Full collection bag Empty the collection bag

Too wet grass Cut in dry weather

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

520CX Lawn Mower

Specifications

Range 40V Sync

Colour Black with Red

Type Push Lawn Mowers

Power Type Battery

Motor Type Brushless

Noise Level 96dB

Starting System Button / Switch

Battery Type Lithium Ion

Battery Capacity 4.0Ah

Battery Voltage 40V

Charging Voltage 240V

Charge Time 2 Hours

Runtime 20 mins

Cutting Width 17"

Height Adjustment 5 Stage Central Height Adjustment

Cutting Height 30 - 75mm

Grass Catcher Volume 52L

Note: Requires assembly

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

Some experts believe that the incorrect or prolonged use of almost any

product may cause serious injury or death. To help reduce your risk of

serious injury or death, refer to the information below. For more information,

see www.datastreamserver.com/safety



Consult all documentation, packaging,

and product labelling before use. Note

that some products feature

documentation available online. It is

recommended to print and retain the

documentation.



Before each use, check the product for

loose/broken/damaged/missing parts,

wear, or leaks (if applicable). Never use a

product with

loose/broken/damaged/missing parts,

wear, or leaks.



Products must be inspected and serviced

(if applicable) by a qualified technician

every 6 months. This is based on

average residential use by persons of

average size and strength, and on a

property of average metropolitan size.

Use beyond these recommendations may

require more frequent

inspections/servicing.



Ensure that all users of the product have

completed a suitable industry recognised

training course before being allowed

access to the product.



The product has been supplied by a general merchandise

retailer that may not be familiar with your specific

application or description of application. Be sure to attain

third-party approval from a qualified specialist for your

application before use, regardless of any assurances from

the retailer or its representatives.



This product is not intended for use where fail-safe

operation is required. As with any product (for example,

automobile, computer, toaster), there is the possibility of

technical issues that may require the repair or

replacement of parts, or the product itself. If the possibility

of such failure and the associated time it may take to

rectify could in any way inconvenience the user, business,

or employee, or financially affect the user, business, or

employee, then the product is not suitable for your

requirements. This product is not intended for use where

incorrect operation or a failure of any kind, including but

not limited to, a condition requiring product return,

replacement, parts replacement, or service by a

technician may cause financial loss, loss of employee

time or an inconvenience requiring compensation.



If this product has been purchased in error when

considering the information presented here, contact the

retailer directly for details of their returns policy, if

required.

diagrams, or images may be reproduced or transmitted in any form or by any means, electronic or

mechanical, including photocopying, scanning, or recording, or any information storage and retrieval system,

without express permission or consent from the publisher.

BAUMR-AG MOWCLSBM520A 520CX 40V Cordless Lawn Mower Kit

Product's Documents

Product manual

Specifications

BAUMR-AG MOWCLSBM520A Questions and Answers