BAUMR-AG MOWCLSBM45CA Cordless Lawn Mower Kit User Manual

THE BATTERY MAY HAVE SOME CHARGE ON ARRIVAL, IT IS IMPORTANT

HOWEVER THAT THE BATTERY IS CHARGED PRIOR TO USE.

User Manual

[Revision 4.0]

READ THIS MANUAL CAREFULLY BEFORE USE – FAILURE TO DO SO MAY RESULT IN INJURY, PROPERTY DAMAGE AND MAY

VOID WARRANTY. • KEEP THIS MANUAL FOR FUTURE REFERENCE. • Products covered by this manual may vary in

appearance, assembly, inclusions, specifications, description, and packaging.

Electric Lawn Mower Kit - 450CX

E&OE © Baumr-AG 2

Safety

Safety messages are designed to alert you to possible dangers or hazards that could cause death, injury or

equipment or property damage if not understood or followed. Safety messages have the following symbols:

You WILL be KILLED or

SERIOUSLY INJURED if you do

not follow instructions.

You CAN be KILLED or

SERIOUSLY INJURED if you do

not follow instructions.

You CAN be INJURED if you do

not follow instructions or equipment

damage may occur.

It is vital that you read and understand this

user manual before using the product,

including safety warnings, and any assembly

and operating instructions. Keep the manual

for future reference.

Safety precautions and recommendations

detailed here must be fully understood and

followed to reduce the risk of injury, fire,

explosion, electrical hazard, and/or property

damage.

Safety information presented here is generic

in nature – some advice may not be

applicable to every product. The term

"equipment" refers to the product, be it

electrical mains powered, battery powered or

combustion engine powered.

• Before Use - If you are not familiar with the

safe operation/handling of the equipment or

are in any way unsure of any aspect of

suitability or correct use for your

application, you should complete training

conducted by a person or organization

qualified in safe use and operation of this

equipment, including fuel/electrical handling

and safety.

• Do NOT operate the equipment in

flammable or explosive environments, such

as in the presence of flammable liquids,

gases, or dust. The equipment may create

sparks or heat that may ignite flammable

substances.

• Keep clear of moving parts.

• Equipment may be a potential source of

electric shock or injury if misused.

• Do NOT operate the equipment if it is

damaged, malfunctioning or is in an

excessively worn state.

• Do NOT allow others to use the equipment

unless they have read this manual and are

adequately trained.

• Keep packaging away from children - risk

of suffocation! Operators must use the

equipment correctly. When using the

equipment, consider conditions and pay

due care to persons and property.

General Work Area Safety

•

Work areas should be clean and well it.

• Do not operate the equipment if

bystanders, animals etc are within

operating range of the equipment or the

general work area.

• If devices are provided for connecting dust

extraction / collection facilities, ensure

these are connected and used properly.

Dust collection can reduce dust-related

hazards.

General Personal Safety

•

Wear appropriate protective equipment

when operating, servicing, or when in the

operating area of the equipment to help

protect from eye and ear injury, poisoning,

burns, cutting and crush injuries. Protective

equipment such as safety goggles,

respirators, non-slip safety footwear, hard

hat, hearing protection etc should be used

for appropriate equipment / conditions.

Other people nearby should also wear

appropriate personal protective equipment.

Do not wear loose clothing or jewellery,

which can be caught in moving parts. Keep

hair and clothing away from the equipment.

• Stay alert and use common sense when

operating the equipment. Do not over-

reach. Always maintain secure footing and

balance.

• Do not use the equipment if tired or under

the influence of drugs, alcohol, or

medication.

• This equipment is not intended for use by

persons with reduced physical, sensory, or

mental capabilities.

General Fuel Safety

•

Petrol/fuel/gasoline is extremely flammable

– keep clear of naked flames or other

ignition sources.

• Do not spill fuel. If you spill fuel, wipe it off

the equipment immediately – if fuel gets on

your clothing, change clothing.

• Do NOT smoke near fuel or when

refuelling.

• Always shut off the engine before

refuelling.

• Do NOT refuel a hot engine.

• Open the fuel cap carefully to allow any

pressure build-up in the tank to release

slowly.

• Always refuel in well-ventilated areas.

• Always check for fuel leakage. If fuel

leakage is found, do not start, or run the

engine until all leaks are fixed.

General Carbon-Monoxide Safety

•

Using a combustion engine indoors CAN

KILL IN MINUTES. Engine exhaust

contains carbon-monoxide – a poison you

cannot smell or see.

• Use combustion engines OUTSIDE only,

and far away from windows, doors, and

vents.

General Equipment Use and Care

•

The equipment is designed for domestic

use only.

• Handle the equipment safely and carefully.

• Before use, inspect the equipment for

misalignment or binding of moving parts,

loose components, damage, or any other

condition that may affect its operation. If

damaged, have the equipment repaired by

an authorised service centre or technician

before use.

• Prevent unintentional starting of the

equipment - ensure equipment and power

switches are in the OFF position before

connecting or moving equipment. Do not

carry equipment with hands or fingers

touching any controls. Remove any tools or

other items that are not a part of the

equipment from it before starting or

switching on.

• Do not force the equipment. Use the

correct equipment for your application.

Equipment will perform better and be safer

when used within its design and usage

parameters.

• Use the equipment and accessories etc. in

accordance with these instructions,

considering working conditions and the

work to be performed. Using the equipment

for operations different from those intended

could result in hazardous situations.

• Always keep equipment components

(engines, hoses, handles, controls, frames,

housings, guards etc) and accessories

(cutting tools, nozzles, bits etc) properly

maintained. Keep the equipment clean and,

where applicable, properly lubricated.

• Store the equipment out of reach of

children or untrained persons. To avoid

burns or fire hazards, let the equipment

cool completely before transporting or

storing. Never place or store the equipment

near flammable materials, combustible

gases, or liquids etc.

• The equipment is not weather-proof, and

should not be stored in direct sunlight, at

high ambient temperatures or locations that

are damp or humid.

• Do not clean equipment with solvents,

flammable liquids, or harsh abrasives.

• For specific equipment safety use and care,

see Equipment Safety.

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

Electric Lawn Mower Kit - 450CX

E&OE © Baumr-AG 3

General Electrical Safety

•

Inspect electrical equipment, extension

cords, power bars, and electrical fittings for

damage or wear before each use. Repair or

replace damaged equipment immediately.

• Ensure all power sources conform to

equipment voltage requirements and are

disconnected before connecting or

disconnecting equipment.

• When wiring electrically powered

equipment, follow all electrical and safety

codes.

• Always use a Residual Current Device

(RCD) (GFCI) / Earth Leakage Circuit

Breaker / Safety Switch when operating this

item (electrical items only).

• High voltage / high current power lines may

be present. Use extreme caution to avoid

contact or interference with power lines.

Electrical shock can be fatal.

General Electrical Safety

•

Electrically grounded equipment must have

an approved cord and plug and be

connected to a grounded electrical outlet.

• Do NOT bypass the ON/OFF switch and

operate equipment by connecting and

disconnecting the electrical cord.

• Do NOT use equipment that has exposed

wiring, damaged switches, covers or

guards.

• Do NOT use electrical equipment in wet

conditions or in damp locations.

• Do NOT use electrical cords to lift, move or

carry equipment.

• Do NOT coil or knot electrical cords, and

ensure electrical cords are not trip hazards.

General Service Information

•

The equipment must be serviced or

repaired at authorised service centres by

qualified personnel only.

• Replacement parts must be original

equipment manufacturer (OEM) to ensure

equipment safety is maintained.

• Do NOT attempt any maintenance or repair

work not described in this manual.

• After use, the equipment and components

may still be hot – allow the equipment to

cool and disconnect spark plugs and/or

electrical power sources and/or batteries

from it before adjusting, changing

accessories, or performing repair or

maintenance.

• Do NOT adjust while the equipment is

running.

• Perform service-related activities in suitable

conditions, such as a workshop.

• Replace worn, damaged or missing

warning/safety labels immediately.

Child Choking Hazard!

• W

ARNING: CHOKING HAZARD - CHILDREN UNDER 8 YRS. CAN CHOKE OR SUFFOCATE ON SMALL PARTS. ADULT

SUPERVISION REQUIRED.

• Carefully inspect anything a baby or child could gain access to, including this product & packaging.

• Dangers include anything of a size that could become stuck or lodged in a baby or child's airway.

• Dangers include things like raw, hard fruit and vegetable pieces, large pieces of meat, bones or sausage skins, popcorn, nuts,

hard lollies and corn chips, small magnets and batteries, coins, beads, marbles and small uninflated balloons, broken toys and smaller toys,

buttons, keys, and coins. But there are also many more.

• Pay particular attention to accessories, nuts, bolts, screws, washers, caps, covers, loose parts, parts that could be removed or break off, pieces

of packaging, staples, tape etc.

• In the case of any doubt, secure the item of concern in an appropriate manner, or completely remove the possibility of access by a baby or child.

HAZARDOUS COMPONENTS

• BE

AWARE THAT THE EQUIPMENT MAY INCLUDE HAZARDOUS COMPONENTS, SUCH AS BLADES, HOT SURFACES AND MOVING

PARTS.

• MOVING BLADES CAN CAUSE SERIOUS INJURY AND EVEN DEATH IF USED IMPROPERLY OR WITHOUT SUFFICIENT PPE.

• DO NOT USE THIS EQUIPMENT ON UNEVEN SURFACES AND ALWAYS MAINTAIN GOOD BALANCE WHEN USING THIS EQUIPMENT.

FAILURE TO DO SO MAY CAUSE SERIOUS INJURY.

• MAINTAIN A SECURE GRIP OF THE TRIGGER ASSEMBLY AT ALL TIMES.

Lawn Mower Safety

•

This product is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience

and knowledge, unless they have been given supervision or instruction concerning use of the product by a person responsible for their safety.

• Local regulations may restrict the age of the operator.

• Children should be supervised to ensure that they do not play with the product.

• Cleaning and user maintenance shall not be made by children without supervision.

• WARNING! WHEN USING THE PRODUCT, THE SAFETY RULES MUST BE FOLLOWED. FOR YOUR OWN SAFETY AND THAT OF

BYSTANDERS PLEASE READ THESE INSTRUCTIONS BEFORE OPERATING THE PRODUCT. PLEASE KEEP THE INSTRUCTIONS

SAFE FOR LATER USE.

Training

•

Read the instructions carefully. Be familiar with the controls and the proper use of the product.

• Never allow children, persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge or people unfamiliar

with these instructions to use the product. Local regulations may restrict the age of the operator.

• Never mow while people, especially children, or pets are nearby.

• Keep in mind that the operator or user is responsible for accidents or hazards occurring to other people or their property.

Preparation

•

While mowing, always wear substantial footwear and long trousers. Do not operate the product when barefoot or wearing open sandals. Avoid

wearing clothing that is loose fitting or that has hanging cords or ties.

• Thoroughly inspect the area where the product is to be used and remove all objects which can be thrown by the product.

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

Electric Lawn Mower Kit - 450CX

E&OE © Baumr-AG 4

• Before using, always visually inspect to see that the cutting blade, cutting blade bolts and cutting blade assembly are not worn or damaged.

Replace worn or damaged cutting blades and bolts in sets to preserve balance. Replace damaged or unreadable labels.

• CAUTION! DO NOT TOUCH A ROTATING CUTTING BLADE.

Operation

•

Operate the product only in daylight or in good artificial light.

• Avoid operating the product in wet grass, where feasible.

• Always be sure of your footing on slopes.

• Walk, never run.

• Mow across the face of slopes, never up and down.

• Exercise extreme caution when changing direction on slopes.

• Do not mow excessively steep slopes.

• Use extreme caution when reversing or pulling the product towards you.

• Stop the cutting blade if the product has to be tilted for transportation when crossing surfaces other than grass, and when transporting the product

to and from the area to be mowed.

• Never operate the product with defective guards or shields, or without safety devices, for example deflectors and/or grass catchers, in place.

• Start the product or switch on the product carefully according to instructions and with feet well away from the cutting blade.

• Do not tilt the product when switching on the motor, except if the product has to be tilted for starting. In this case, do not tilt it more than

absolutely necessary and lift only the part, which is away from the operator.

• Do not start the product when standing in front of the discharge chute.

• Do not put hands or feet near or under rotating parts. Keep clear of the discharge opening at all times.

• Do not transport the product while the power source is running.

• Never pick up or carry the product while the safety key is inserted.

• Stop the machine and remove the disabling device. Make sure that all moving parts have come to a complete stop:

• Whenever you leave the product.

• Before clearing blockages or unclogging chute.

• Before checking, cleaning, or working on the product.

• After striking a foreign object. Inspect the product for damage and make repairs before restarting and operating the product.

• If the product starts to vibrate abnormally (check immediately).

• Inspect for damage.

• Replace or repair any damaged parts.

• Check for and tighten any loose parts.

Maintenance and storage

•

Disconnect the product from the power supply (i.e. remove the battery pack and / or safety key) before checking, cleaning or working on the

product and when it is not in use.

• Disconnect the product from the power supply (i.e. remove the battery pack and / or safety key) before carrying out maintenance or cleaning

work.

• Improper maintenance will lead to malfunction/failure of the product.

• Inspect and maintain the product regularly. Keep all nuts, bolts and screws tight to be sure the product is in safe working condition.

• Check the grass catcher frequently for wear or deterioration.

• Be careful during adjustment of the product to prevent entrapment of the fingers between moving blades and fixed parts of the product.

• Always allow the product to cool before storing.

• When servicing the blades be aware that, even though the power source is switched off, the blades can still be moved.

• Replace worn or damaged parts for safety. Use only genuine replacement parts and accessories.

• Wear strong work gloves when removing and re- assembling the cutting blade.

• Have the product repaired only by an authorized service centre or similar qualified specialist.

• When not in use, store the product out of the reach of children.

Safety Warnings For Battery Pack

•

Recharge the battery pack only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create

a risk of fire when used with another battery pack.

• Use the product only with specifically designated battery pack. Use of any other battery packs may create a risk of injury and fire.

• When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects

that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire.

• Under abusive conditions, liquid may be ejected from the battery pack; avoid contact. If contact accidentally occurs, flush with water. If liquid

contacts eyes, additionally see medical help. Liquid ejected from the battery may cause irritation or burns.

• Do not use battery pack that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behaviour resulting in fire,

explosion, or risk of injury.

• Do not expose a battery pack or tool to fire or excessive temperature. Continuous intense sunlight, fire or other heat sources may cause an

increased danger of explosion.

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

Electric Lawn Mower Kit - 450CX

E&OE © Baumr-AG 5

• Batteries can explode in the presence of a source of ignition, such as a pilot light. To reduce the risk of serious personal injury, never use any

cordless product in the presence of an open flame. An exploded battery can propel debris and chemicals. If exposed, flush with water

immediately.

• Follow all charging instructions and do not charge the battery pack outside the temperature range specified in the instructions. Charging

improperly or at temperatures outside the specified range may damage the battery and increase the risk of fire.

• Do not charge battery in a damp or wet location. Following this rule will reduce the risk of electric shock.

• Longer life and better performance can be obtained if the battery is charged when the air temperature is between 18°C and 24°C. Do not charge

the battery in air temperature below 5°C or above 40°C. This is important as it can prevent serious damage to the battery.

• Remove the battery pack from the product when not in use.

• Don’t maintain the battery pack on the charger when not in use.

• After extended periods of storage, it may be necessary to charge and discharge the battery pack several times to obtain the maximum

performance.

• Do not disassemble the battery and avoid mechanical damage to the battery. Risk of short circuit and fumes may be emitted. Ensure fresh air

and seek medical assistance in the event of discomfort.

• Never service damaged battery packs. Service of battery packs should only be performed by the manufacturer or authorized service providers.

• When disposing of battery pack, keep the battery pack of different electro chemical systems separate from each other.

Vibration and noise reduction

To reduce the impact of noise and vibration emission, limit the time of operation, use low-vibration and low-noise operating modes as well as wear

per

sonal protective equipment.

Take the following points into account to minimise the vibration and noise exposure risks:

• Only use the product as intended by its design and these instructions.

• Ensure that the product is in good condition and well maintained.

• Use correct cutting attachments for the product and ensure they are in good condition.

• Keep tight grip on the handles/grip surface.

• Maintain this product in accordance with these instructions and keep it well lubricated (where appropriate).

• Plan your work schedule to spread any high vibration tool use across a longer period of time.

Emergency

Familiarise yourself with the use of this product by means of this instruction manual. Memorise the safety directions and follow them to the letter.

T

his will help to prevent risks and hazards.

• Always be alert when using this product, so that you can recognise and handle risks early. Fast intervention can prevent serious injury and

damage to property.

• Switch the product off and remove the battery pack if there are malfunctions. Have the product checked by a qualified professional and repaired,

if necessary, before you operate it again.

Residual risks

Even if you are operating this product in accordance with all the safety requirements, potential risks of injury and damage remain. The following

danger

s can arise in connection with the structure and design of this product:

• Health defects resulting from vibration emission if the product is being used over long periods of time or not adequately managed and properly

maintained.

• Injuries and damage to property due to broken attachments or the sudden impact of hidden objects during use.

• Danger of injury and property damage caused by flying objects.

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

Electric Lawn Mower Kit - 450CX

E&OE © Baumr-AG 6

Safety Symbols

The product may have safety warning labels attached to it, explained below. Understand the symbols on your

product and their meanings. If any stickers become unreadable, unattached etc., replace them.

Flammable Material Hazard

Flammable liquids, gases, or

substances etc may present.

Avoid ignition sources and open

flames. Danger of fire.

Read User Manual

Read and fully understand

product safety warnings,

operation, procedures etc before

using the product.

Use Hand Protection

Wear appropriate hand protection

and take due care as the product

or use of the product may present

hand hazards.

Carbon-Monoxide Hazard

Do not use the product in

confined areas or without

adequate ventilation. Carbon-

monoxide poisoning can be fatal.

Electrocution / Electrical Shock

Hazard

High voltage or high current

electricity may be present or

required by the product. Take

due care when handling electrical

products, cables, plugs and

leads. Electrical shock can be

fatal.

Toxic Fumes / Dust Hazard

Using the product or by-products

from use may produce fumes,

smoke or particles that could be

harmful if inhaled. Wear

appropriate breathing protection

and have adequate ventilation.

Explosive Material Hazard

Combustible liquids, gases, or

substances etc may be present.

Avoid ignition sources and open

flames. Danger of explosion.

Cutting / Amputation Hazard

The product may have blades,

edges or mechanical devices that

can cause severe cut injury to

fingers, limbs etc. Take due care

when handling and using the

product.

Crush Hazard

The product may have blades,

edges or mechanical devices that

can cause severe crush injury to

fingers, limbs etc. Take due care

when handling and using the

product.

Single Operator Only

The product must be operated by

a single person only. More than

one person operating the product

may introduce additional hazards.

Use Face Protection

Wear appropriate full-face

protection and take due care as

the product or use of the product

may present face and eye

hazards.

Use Foot Protection

Wear appropriate foot protection

and take due care as the product

or use of the product may present

foot hazards.

Use Eye / Ear / Head Protection

Wear appropriate eye and / or

ear and / or head protection and

take due care as the product or

use of the product may present

eye, hearing, and head hazards.

Running Hazard

Do not run on or near the product

as doing so may present a fall

hazard.

Diving Hazard

Do not dive into the product as

doing so may present a neck /

head injury hazard.

Adult Supervision Required

Always supervise children and

other users of a product to

prevent drowning or injury.

Skin Penetration / Puncture

Hazard

The product may produce

pressure, emit liquids or objects

that can cause severe injury to

fingers, limbs, blood etc. Take

due care when handling and

using the product.

Hot Surface Hazard

Be aware that the product may

produce high temperatures and

hot surfaces that can cause burn

injuries.

Flying Debris Hazard

Be aware that the product or use

of the product may present

hazards produced by flying

debris. Wear appropriate clothing

and protective devices.

Moving Parts Hazard

Be aware that the product

contains or uses mechanical

devices that move or rotate.

Always wait for moving parts to

stop fully before handling the

product, adjusting, maintenance

etc.

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

Electric Lawn Mower Kit - 450CX

E&OE © Baumr-AG 7

Carbon-Monoxide Hazard

Do not use the product in

confined areas or without

adequate ventilation. Carbon-

monoxide poisoning can be fatal.

Pull Hazard

Be aware that the product

contains or uses mechanical

devices that can pull in objects

and can cause severe injury to

fingers, limbs etc. Take due care

when handling and using the

product.

Slope / Fall Injury Hazard

Be aware that using the product

on sloping surfaces or in slippery

conditions may present additional

dangers from falls and contact

with blades, moving parts, hot

surfaces etc.

"Slam Dunk" Warning

Do NOT attempt "slam dunk"

manoeuvres as this may result in

severe injury due to falling,

product breakage or collapse etc.

Electrocution / Electrical Shock

Hazard - Outdoor

High voltage or high current

electricity may be present or

required by the product. Do NOT

use in rain, damp, or wet

conditions. Electrical shock can

be fatal.

Electrocution / Electrical Shock

Hazard - Disconnect

High voltage or high current

electricity may be present or

required by the product. Always

disconnect the product from the

electrical supply before handling

the product, adjusting,

maintenance etc.

Power Line Electrocution

Hazard

High voltage / high current power

lines may be present. Use

extreme caution to avoid contact

or interference with power lines.

Electrical shock can be fatal.

"Kick-Back" Hazard

High level of "kick-back" hazard

that can cause the machine to

suddenly rotate towards operator.

Kick-back injury can be fatal.

Winch Operator Position

Hazard

Do NOT stand between winch

and load. Do NOT use winch to

move people.

Winch Lift Hazard

Do NOT LIFT load vertically. Use

machine to PULL only.

Cable Hazard

Ensure that load bearing cable is

not kinked or knotted.

Winch Cable Hazard

Ensure that there is a minimum

number of cable coils on

winching mechanism.

Winch Hook Hazard

Carry hook to load – do NOT

throw or run.

Flash / Blinding Hazard

Wear appropriate eye protection

for welding. Direct exposure to

weld arcs may cause permanent

eye injury.

Laser Hazard

Laser may be in use – do NOT

look directly at laser or allow

others to.

Choking Hazard

Children under 8 yrs. Can choke

or suffocate on small parts. Adult

supervision required.

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

Electric Lawn Mower Kit - 450CX

E&OE © Baumr-AG 8

Table of Contents

Safety ............................................................................................................................................................. 2

Safety Symbols ........................................................................................................................................................... 6

Parts Identification ....................................................................................................................................... 9

Assembly ..................................................................................................................................................... 10

Unpacking ................................................................................................................................................................. 10

Set-Up ....................................................................................................................................................................... 10

Lower Handle ............................................................................................................................................................ 11

Upper Handle ............................................................................................................................................................ 11

Grass Catcher ........................................................................................................................................................... 11

Battery Pack ............................................................................................................................................................. 13

Releasing the Battery Pack ...................................................................................................................................... 14

Charging the Battery Pack ........................................................................................................................................ 14

Battery capacity indicators ........................................................................................................................................ 15

Connect Battery Pack ............................................................................................................................................... 15

Operation ..................................................................................................................................................... 16

Intended Use ............................................................................................................................................................ 16

Cutting Height Adjustment ........................................................................................................................................ 16

Grass Indicator ......................................................................................................................................................... 17

Emptying ................................................................................................................................................................... 17

General Operation .................................................................................................................................................... 18

Starting/Stopping ...................................................................................................................................................... 18

Mowing ..................................................................................................................................................................... 19

Emptying the Grass Catcher .................................................................................................................................... 20

After Use ................................................................................................................................................................... 20

Lithium Battery Care and Maintenance .................................................................................................... 21

Top 3 Battery Care Requirements ............................................................................................................................ 21

Maintenance ................................................................................................................................................ 23

Golden Rules for Mower Care .................................................................................................................................. 23

General Cleaning ...................................................................................................................................................... 23

Underbody and Cutting Blade .................................................................................................................................. 23

Grass Catcher ........................................................................................................................................................... 24

Electrical Cord .......................................................................................................................................................... 24

Repair ....................................................................................................................................................................... 24

Storage ..................................................................................................................................................................... 24

Transportation ........................................................................................................................................................... 25

Specifications ............................................................................................................................................. 26

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

Electric Lawn Mower Kit - 450CX

E&OE © Baumr-AG 9

Parts Identification

No. Name No. Name

1 Grip handle with foam 12

Rear wheel (x2)

Rear wheel cap (x2)

2 Switch trigger 13 Deck

3 Switch box 14 Upper cover

4 Upper handle 15

Lever for cutting height

adjustment

5

Wing nut (x2)

a. Mounting bolt (x2)

16 Battery cover

6 Lower handle 17

Front wheel (x2)

Front wheel cap (x2)

7

Grass indicator

18

Grass collector handle

8

Grass collector top cover

19

Carry handle

9 Grass collector lower part 20 Safety key

10 Rear flap 21 Battery pack

11 Wire clip 22 Charger

Spare parts available

for purchase, scan QR

code below:

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

Electric Lawn Mower Kit - 450CX

E&OE © Baumr-AG 10

Assembly

Unpacking

1. Unpack all parts and lay them on a flat, stable surface.

2. Remove all packing materials and shipping devices if applicable.

3. Make sure the delivery contents are complete and free of any damage. If you find that parts are missing or

show damage do not use the product but contact your dealer. Using an incomplete or damaged product

represents a hazard to people and property.

4. Ensure that you have all the accessories and tools needed for assembly and operation. This also includes

suitable personal protective equipment.

WARNING! The product and the packaging are not children’s toys! Children must not play with plastic

bags, sheets, and small parts! There is a danger of choking and suffocation!

Materials needed:

Supplied:

•

Grass collector (7,8,9,18)

•

Battery pack (21)

•

Charger (22)

Not supplied:

•

Suitable personal protective equipment

•

Suitable crosshead driver

NOTE: The accessories required depend on the intended application. Ask your dealer for advice.

Set-Up

WARNING! The product must be fully assembled before operation! Do not use a product that is only

partly assembled or assembled with damaged parts! Follow the assembly instructions step-by-step and

use the pictures provided as a visual guide to easily assemble the product! Do not connect the product

to battery pack (21) before it is completely assembled!

NOTE: Take care of small parts that are removed during assembly or when making adjustments. Keep

them secure to avoid loss.

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

Electric Lawn Mower Kit - 450CX

E&OE © Baumr-AG 11

Lower Handle

1. Put the main unit (13) on the ground.

2. Insert the lower handle (6) into the corresponding hole of the deck, and fix the lower handle with 2 screws*.

NOTE: Parts marked with * are not shown in this overview. Please refer to the respective part in the

instruction manual.

Upper Handle

1. Hold the upper handle (1) with switch trigger (2) facing upwards. Align

the mounting holes of the upper handle (1) and the lower handle (6).

2. Pass the mounting bolts (5-a) through the mounting holes of the upper

handle (1) and the lower handle (6) to the end, fasten the bolt (5-a)

with the wing nut (5).

3. Make sure the electrical cord run on the handles.

4. Fix the electrical cord with the wire clip (11) on the lower handles (6).

NOTE: Make sure the wing nuts (5) and mounting bolts (5-a) are

properly tightened before using the product.

Grass Catcher

1. Splicing together the left and right halves of the lower part of the grass

collector (9).

2. Insert the lower part of grass collector (9), grass indicator (7) and grass

collector handle (18) into the top cover (8).

3. Open the rear flap (10) and hold it in position.

4. Carefully release the rear flap (10) afterwards.

NOTE: Always carry the grass catcher by its handle (18).

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

Electric Lawn Mower Kit - 450CX

E&OE © Baumr-AG 12

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

Electric Lawn Mower Kit - 450CX

E&OE © Baumr-AG 13

Battery Pack

Attaching the battery pack:

1. Pull open the battery cover (16).

2. Unplug the safety key (20) and keep it hanging by its string.

3. Slide the battery pack (21) into the slots of the battery compartment.

4. Make sure that the electrical contacts are fully inserted into the battery pack (21) and that it snaps in place

with a click.

5. The battery pack (21) can only be installed in one direction.

6. Reinstall the safety key (20) into its slot.

7. Close the battery cover (16).

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

Electric Lawn Mower Kit - 450CX

E&OE © Baumr-AG 14

Releasing the Battery Pack

The battery pack (21) can’t be charged whilst in the mower. Remove the battery pack (21) from its battery

compartment or spare battery compartment for charging.

1. Pull open the battery cover (16).

2. Squeeze the release button to unlock the latch of battery pack (21).

3. Slide out the battery pack (21) from the battery compartment.

4. Close the battery cover (16).

Charging the Battery Pack

The battery pack (21) for this product has been shipped in a low charge condition. Charge it fully before first use.

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

Electric Lawn Mower Kit - 450CX

E&OE © Baumr-AG 15

Battery capacity indicators

The battery pack (21) is equipped with the battery capacity indicators which are used to give an indication of the

battery pack’s remaining capacity. Press the battery capacity button to check battery capacity.

Connect Battery Pack

1. Make sure the switch trigger (2) is released and safety switch button is not pressed.

2. Attach the battery pack (21) to the product. Ensure it snaps in place.

3. Insert the safety key (20) into its slot fully.

4. Your product is now ready to be used.

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

Electric Lawn Mower Kit - 450CX

E&OE © Baumr-AG 16

Operation

Intended Use

•

This cordless lawn mower is designated with a rated voltage of 40V. It is designed only to be used with the

battery pack.

•

The product is intended for mowing grass in domestic gardens only. It must not be used to mow unusually

high, dry, or wet grass, e.g. pasture grass, or to shred leaves.

•

For safety reasons it is essential to read the entire instruction manual before first operation and to observe

all the instructions therein.

•

This product is intended for private domestic use only, not for any commercial trade use. It must not be used

for any purposes other than those described.

Cutting Height Adjustment

WARNING! Switch the product off and wait that the cutting blade to come to a complete stop before

adjusting the cutting height! Remove the safety key (20) before adjusting the cutting height!

Adjust the cutting height according to the needs of your lawn. The cutting height depends on the kind of lawn

and its actual height. When mowing high grass, start with the maximum cutting height and make a second cut

with a lower cutting height.

The mowing height is set in 3 positions independently on the front and rear wheel axle.

•

1

st

position: 30 mm

•

2

nd

position: 50 mm

•

3

rd

position: 70 mm

Setting the height of the front wheels - pull the wheel away from the grass catcher and select the desired height.

Follow this procedure for both front wheels.

Setting the height of the rear wheels - pull the wheel towards the grass catcher and select the desired height.

The height should be the same as on the front wheels. Follow this procedure for both rear wheels.

NOTE: Make sure that the height of all 4 wheels is set the same.

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

Electric Lawn Mower Kit - 450CX

E&OE © Baumr-AG 17

Grass Indicator

The grass collector is equipped with a hatch that indicates the filling during operation.

1. When the hatch is opened, indicator (7) is blown up by airflow, which means the grass collector has

sufficient volume left to collect grass.

2. When the hatch is closed, the grass collector is full and must be emptied.

NOTE: A full grass catcher will reduce the performance of this product.

Emptying

Empty the grass collector frequently during use. Do not wait until it is completely full. We recommend emptying it

when it is half full.

1. Switch the product off and make sure that the motor has stopped, and the cutting blade has stopped

rotating.

2. Lift the rear flap (10) and lift the grass collector off the hooks.

3. Remove the grass clippings from the rear discharge chute into the grass collector. Use a proper tool such as

a brush.

4. Remove the grass collector by its carry handle.

5. Empty the grass clippings onto a compost heap.

6. Re-fit the grass collector to the product.

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

Electric Lawn Mower Kit - 450CX

E&OE © Baumr-AG 18

General Operation

1. Check the product, its battery pack and charger as well as accessories for damage before each use. Do not

use the product if it is damaged or shows wear. Take care of any problem you find or have the product

checked by qualified specialist.

2. Double check that accessories or attachments are properly fixed.

3. Always push the product using the grip handle (1). Keep the handles dry to ensure safe support.

4. Ensure that the air vents are always unobstructed and clear. Clean them, if necessary, with a soft brush.

Blocked air vents may lead to overheating and damage the product.

5. Switch the product off immediately if you are disturbed while working by other people entering the working

area. Always let the product come to complete stop before putting it down.

6. Do not overwork yourself. Take regular breaks to ensure you can concentrate on the work and have full

control over the product.

Starting/Stopping

WARNING! Before starting, put the product on a flat surface free of high grass! Clean the underside of

the deck! Start the motor carefully according to instructions. Keep your feet well away from the cutting

blade! Do not tilt the product when starting the motor.

1. Install the battery pack (21) into the battery compartment.

2. Insert the safety key (20) into the slot fully.

3. Close the battery cover (16) and stand behind the grip handle (1).

4. While holding the safety switch button* pressed, pull the switch trigger (2) towards the grip handle (1) .

5. After the mower starts, release the safety switch button*.

6. The product begins mowing.

7. Release the switch trigger (2) to stop the mower.

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

Electric Lawn Mower Kit - 450CX

Mowing

1. Make sure that the lawn is clear of stones, sticks, wire, or other objects that could damage the product or its

product.

WARNING! If the product strikes a foreign object stop immediately! Let the product cool down and

thoroughly inspect the product for damage! Have any damage repaired before restarting! Extensive

vibration of the product during operation is an indication of damage! The product should be promptly

inspected and repaired!

2. Do not cut wet grass because it tends to stick to the underbody of the product,

preventing the proper discharge of grass clippings, and it could also cause you to

slip and fall.

3. Never cut off more than one-third of the total length of the grass for a healthy lawn.

In the autumn, lawns should only be cut as long as there is growth.

4. Slowly push the product forward.

5. Mow in slight overlapping rows. The most effective hat all the lawn is cut without

missing any spots.

6. Circle around flower beds. When reaching a flower bed in the middle of the lawn,

cut a row or two around the circumference of the bed.

7. Pay special attention when changing direction.

WARNING: • Always observe the strictest safety procedures when using the lawnmower. • Carefully read

the safety instructions of this manual before using the lawnmower. • Never open the ejector flap when

the grass catcher has been detached (to be emptied) and the engine is still running. The rotating blade

can cause serious injuries!

1. Select your required setting.

2. Start the engine and allow it to run and set it to required speed.

3. Keep a firm grip on the upper handle with engine stop/start lever and drive lever (clutch lever) dosed and

walk along with its self-propelling to start mowing.

When Mowing:

•

Walk. never run with the mower. be very careful when mowing uneven or rough ground.

•

Mow across slopes. never up and down.

•

Be careful when changing the direction of the mower on a slope.

•

Do not mow excessively steep slopes.

Note: Grass clippings can clog underneath the mower deck, preventing the blades from turning. This

can overheat the engine, causing excessive wear to engine components, reducing the lawn mower's

overall lifespan or catastrophic failure of engine bearings and pistons.

Clogging occurs if you mow wet, long, or lush grass. For the best result, mow when the grass is dry

and use a whipper snipper to reduce the height of grass longer than 15cm (6”) before mowing on the

highest cutting setting.

•

Grass grows at different rates at different time of the year. Never use the lowest cutting height for the first cut

of the season or in drought conditions.

•

Only about one thirds of the grass height should be cut.

•

When mowing with the mulching function, do not cut high or wet grass to ensure that the cut grass can be

scattered efficiently. When you have been cutting for several minutes, please stop the mower, and clean the

blade and the deck.

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

Electric Lawn Mower Kit - 450CX

•

Do not remove grass debris in the mower casing or on the blade by hand or with your feet. Instead, use

suitable tools such as a brush or broom.

Emptying the Grass Catcher

A lawn mower generates significant airflow when it moves the grass into the catcher. The catcher is fitted with a

full indicator flap, which stays up if there is space inside. When the space inside the catcher is filled with grass,

the airflow is no longer enough to raise the flap. The flap will drop at this point, indicating it is time to empty the

catcher.

As soon as grass clippings start to trail the lawn mower, it is time to empty the grass catcher.

NOTE· Before taking off the grass catcher, switch off the engine and wait until the blade has come to a

stop.

1. To take off the grass catcher, use one hand to lift up the ejector flap and the other to grab onto the carry

handle. The ejector flap automatically falls down after removing the grass catcher and closes off the rear

chute opening.

2. Empty the grass catcher of grass debris and then refit grass catcher.

NOTE: If any grass residue is caught in the discharge chute, clean it using a brush. Do not remove grass

debris in the mower casing or on the blade with your hand or feet. Instead, use suitable tools such as a

brush or broom. To ensure that the cut grass can be collected into the grass catcher, the discharge

opening, and interior of the mower casing must be cleared of any blockage.

After Use

1. Switch the product off, disconnect the safety key (20), remove the battery pack (21) and let it cool down.

2. Check, clean and store the product as described in Maintenance.

Grass catcher full

indicator flap

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

Electric Lawn Mower Kit - 450CX

Lithium Battery Care and Maintenance

Top 3 Battery Care Requirements

1. Charge battery before first use. The battery may arrive with some charge, regardless of this the

battery must be charged for 2 hours on the initial charge and 2 hours for each subsequent charge.

2. Charge battery immediately when it is depleted. Do not store a depleted battery. This will

permanently impact the life of the battery. If the battery is going to be stored for a period of time, fully

charge the battery before storing.

3. Disconnect battery when not in use. To prolong the life of a battery, disconnect it from the unit

when not in use. Disconnect chargers from the battery once charged.

To ensure the battery maintains optimum performance, follow the guidelines outlined below.

•

For best results, charge batteries in temperatures between 10°C and 30°C

•

When battery is charged, disconnect the charger from the power supply and remove the battery from the

charger.

•

If a battery is stored or otherwise unused for an extended period, and the battery has no charge remaining

when you check it, consider it to be damaged. Do not attempt to recharge it or to use it. Replace it with a

new battery.

•

Use only with the battery charger specified by the manufacturer.

•

Ensure that the battery charger electrical cord is not subjected to damage or stress. Do not operate the

battery charger if it has a damaged electrical cord or plug.

•

Do not use the charger in wet areas or expose it to rain or water.

•

The typical estimated life of a Lithium-Ion battery is about two to three years or 300 to 500 charge cycles,

whichever occurs first. One charge cycle is a period of use from fully charged, to fully discharged, and fully

recharged again.

•

Explosion hazard – protect the battery against heat, for example, direct sunlight and fire. Do not store

batteries in vehicles or locations subject to heat.

•

Batteries can explode in the presence of an ignition source, such as a pilot light. To reduce the risk of

serious personal injury, never use any cordless product in the presence of open ﬂame. Exploding batteries

can propel debris and chemicals.

•

Do not open the battery – danger of short-circuiting and/or explosion.

•

Do not attempt to destroy or disassemble the battery pack or remove any of its components.

•

Do not touch the battery terminals with metal objects and/or body parts as short-circuit and/or personal injury

may result.

•

Explosion hazard – do not open and/or short-circuit the battery.

•

Poison hazard – battery leakage (liquid ejection). Under extreme conditions, liquid may be ejected from the

battery – avoid contact. If contact accidentally occurs, immediately seek medical attention, and flush with

water. If liquid contacts eyes, immediately seek medical attention, flush with clean water for at least 10

minutes. Liquid ejected from the battery may cause irritation or burns.

•

Dispose of non-serviceable batteries in an environmentally responsible manner and according to local

regulations.

Failure to adhere to the requirements above may result in the battery becoming inoperative or battery life being

reduced. In extreme cases or abuse, battery overheating, or fire may result.

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

Electric Lawn Mower Kit - 450CX

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

Electric Lawn Mower Kit - 450CX

Maintenance

ATTENTION: Surface corrosion will occur on metal surfaces over time and the rate of oxidation

depends on factors such as proximity to the ocean and humidity or condensation of water

vapour on metal surfaces. To mitigate this, WD40 can be used to remove surface corrosion then, when

applied periodically, it will prevent rust from forming.

Golden Rules for Mower Care

WARNING! Always switch the product off, remove the battery pack (21) and the safety key (20). Let the

product cool down before performing inspection, maintenance, and cleaning work!

1. Keep the product clean. Remove debris from it after each use and before storage.

2. Regular and proper cleaning will help ensure safe use and prolong the life of the product.

3. Inspect the product before each use for worn and damaged parts. Do not operate it if you find broken and

worn parts.

WARNING! Only perform repairs and maintenance work according to these instructions! All further

works must be performed by a qualified specialist!

General Cleaning

•

Clean the product with a dry cloth. Use a brush for areas that are hard to reach.

NOTE: Do not use chemical, alkaline, abrasive, or other aggressive detergents or disinfectants to

clean this product as they might be harmful to its surfaces.

•

Remove stubborn dust with high pressure air (max. 3 bar).

Underbody and Cutting Blade

WARNING! Wear safety gloves when working on the blade and close to it! Use proper tools to remove

debris, e. g. a wooden stick! Never use your bare hands! Always use original spare parts for

replacement. The cutting blade must be replaced by the right identification. Do not attach any other type

of cutting blade! The replacement of the cutting blade should be done by a qualified specialist! Rework

or sharpening blades is not recommended unless it is done by a repair service or a similarly qualified

specialist!

1. Keep the underbody and cutting blade clean and free of debris. Remove clippings from the rear discharge

chute.

2. Check all fasteners, such as nuts and bolts, periodically for tightness before operation.

3. After prolonged use, especially in sandy soil conditions, the cutting blade will become worn and lose some of

the original shape. The cutting efficiency will be reduced, and the cutting blade should be replaced.

4. Keep the cutting blade sharp to ensure a good cutting performance.

5. Replace a worn or damaged cutting blade with a new one of the same type or have it sharpened by a

qualified specialist.

6. Loosen the hex nut anti-clockwise using a suitable wrench (Size 13 mm) and remove it together with the

cutting blade, the flat washer, and the spring washer.

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

Electric Lawn Mower Kit - 450CX

7. Replace the cutting blade with a new one of the

same type. Check the status of flange onto the

spindle first, then attach the cutting blade, the flat

washer, the spring washer, and the hex nut

properly. Tighten the hex nut clockwise with 30

Nm min, 35 Nm max. to ensure safe operation of

your product.

8. Replace this cutting blade after 50 hours mowing

or 2 years whichever is sooner regardless of

condition. If the cutting blade is cracked or

damaged, you must immediately replace it with a

new one.

9. Lubricate the cutting blade after each use to

prolong the life span of cutting blade and product.

Apply light machine oil along the edge of the

cutting blade.

Grass Catcher

•

Inspect the grass collector before each use. Do

not use it if you find any damage.

•

Clean the grass collector after every operation

using water and mild soap.

•

Let the grass collector dry thoroughly before

storing to avoid mildew.

Electrical Cord

Check the electrical cord before each use.

Repair

This product does not contain any parts that can be repaired by the consumer.

Storage

1. Switch the product off, disconnect the safety key (20) and remove the battery pack (21) before storage.

2. Clean the product as described above.

3. Store the product and its accessories in a dark, dry, frost-free, well-ventilated place.

4. Always store the product in a place that is inaccessible to children. The ideal storage temperature is between

10 °C and 30 °C.

5. We recommend using the original package for storage or covering the product with a suitable cloth or

enclosure to protect it against dust.

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

Electric Lawn Mower Kit - 450CX

VIDEO TUTORIAL: FOLDING THE HANDLES FOR STORAGE

Transportation

1. Switch the product off, disconnect the safety key (20) and remove the battery pack (21) before transporting it

anywhere.

2. Attach transportation guards, if applicable.

3. Always transport the product by its carry handle (19).

4. Protect the product from any heavy impact or strong vibrations which may occur during transportation in

vehicles.

5. Secure the product to prevent it from slipping or falling over, damage and injury.

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

Electric Lawn Mower Kit - 450CX

Specifications

Colour Black with Red

Power Type Battery

Starting System Electric Start

Motor Type Brushless

Battery 2 x 20V 4.0Ah

Runtime 20 mins

Charging Time 2 hours

Cutting Width 320mm

Deck Width 340mm

Deck Material Polypropylene

Height Adjustment 3 position (during assembly)

Cutting Height 30-70mm

Catcher Volume 23L

Note: Requires assembly

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

Some experts believe that the incorrect or prolonged use of almost any

product may cause serious injury or death. To help reduce your risk of

serious injury or death, refer to the information below. For more information,

see www.datastreamserver.com/safety



Consult all documentation, packaging,

and product labelling before use. Note

that some products feature

documentation available online. It is

recommended to print and retain the

documentation.



Before each use, check the product for

loose/broken/damaged/missing parts,

wear, or leaks (if applicable). Never use a

product with

loose/broken/damaged/missing parts,

wear, or leaks.



Products must be inspected and serviced

(if applicable) by a qualified technician

every 6 months. This is based on

average residential use by persons of

average size and strength, and on a

property of average metropolitan size.

Use beyond these recommendations may

require more frequent

inspections/servicing.



Ensure that all users of the product have

completed a suitable industry recognised

training course before being allowed

access to the product.



The product has been supplied by a general merchandise

retailer that may not be familiar with your specific

application or description of application. Be sure to attain

third-party approval from a qualified specialist for your

application before use, regardless of any assurances from

the retailer or its representatives.



This product is not intended for use where fail-safe

operation is required. As with any product (for example,

automobile, computer, toaster), there is the possibility of

technical issues that may require the repair or

replacement of parts, or the product itself. If the possibility

of such failure and the associated time it may take to

rectify could in any way inconvenience the user, business,

or employee, or financially affect the user, business, or

employee, then the product is not suitable for your

requirements. This product is not intended for use where

incorrect operation or a failure of any kind, including but

not limited to, a condition requiring product return,

replacement, parts replacement, or service by a

technician may cause financial loss, loss of employee

time or an inconvenience requiring compensation.



If this product has been purchased in error when

considering the information presented here, contact the

retailer directly for details of their returns policy, if

required.

diagrams, or images may be reproduced or transmitted in any form or by any means, electronic or

mechanical, including photocopying, scanning, or recording, or any information storage and retrieval system,

without express permission or consent from the publisher.

BAUMR-AG MOWCLSBM45CA Cordless Lawn Mower Kit

Product's Documents

Product manual

Specifications

BAUMR-AG MOWCLSBM45CA Questions and Answers