THERMOSENSE 400 BLACK WOODY
THERMOSENSE 400 WHITE WOODY
Hervidor eléctrico de agua/ Electric kettle
Manual de instrucciones
Instruction manual
Manuel d’instructions
Bedienungsanleitung
Manuale di istruzioni
Manual de instruções
Instructiehandleiding
Instrukcja obsługi
Návod k použití
THERMOSENSE 400 BLACK WOODY/WHITE WOODYTHERMOSENSE 400 BLACK WOODY/WHITE WOODY
3130
ENGLISHESPAÑOL
1. PARTS AND COMPONENTS
Fig. 1
1. Spout
2. Lid
3. Base
4. Switch
5. Water-level indicator
6. Handle
NOTE:
The graphics in this manual are schematic representations and may not exactly match the
product.
2. BEFORE USE
- This appliance is packaged in a way as to protect it during transport. Take the appliance
out of its box and remove all packaging materials. You can keep the original box and other
packaging elements in a safe place. This will help you prevent product damage when
transporting it in the future. In case the original packaging is disposed of, make sure all
packaging materials are recycled accordingly.
- Make sure all parts and components are included and in good conditions. If there is any
piece missing or in bad conditions, contact the ocial Cecotec Technical Support Service
immediately.
3. OPERATION
Before using the product for the rst time, boil water twice without cleaning agents.
1. Fill the kettle with water within the minimum and maximum level, without exceeding the
limit. Pay attention to the water-level indicator to keep water below the max. level.
2. Place the kettle on the base.
3. Make sure the voltage of the cord is compatible with the voltage of the mains and connect
the kettle to the mains socket.
4. Press the switch: the LED indicator will immediately light up, indicating that the device
has started heating up.
5. After boiling water, the machine switches o automatically.
Se recomienda que las reparaciones se efectúen por personal especializado.
Si detecta una incidencia con el producto o tiene alguna consulta, póngase en contacto con el
Servicio de Asistencia Técnica ocial de Cecotec a través del número de teléfono +34 96 321
07 28.
9. COPYRIGHT
Los derechos de propiedad intelectual sobre los textos de este manual pertenecen a CECOTEC
INNOVACIONES, S.L. Quedan reservados todos los derechos. El contenido de esta publicación no
podrá, ni en parte ni en su totalidad, reproducirse, almacenarse en un sistema de recuperación,
transmitirse o distribuirse por ningún medio (electrónico, mecánico, fotocopia, grabación o
similar) sin la previa autorización de CECOTEC INNOVACIONES, S.L.
THERMOSENSE 400 BLACK WOODY/WHITE WOODYTHERMOSENSE 400 BLACK WOODY/WHITE WOODY
3332
ENGLISH ENGLISH
Inside the
kettle water is
dirty and you
can see the
scale.
When using hard water, calcium, bicarbonate, and magnesium
carbonate can accumulate. Decalcify the kettle regularly.
6. TECHNICAL SPECIFICATIONS
Model: ThermoSense 400 Black Woody/ ThermoSense 400 White Woody/ ThermoSense
400 Black Woody X/ ThermoSense 400 Black Woody M/ ThermoSense 400 Black Woody S/
ThermoSense 400 Black Woody T/ ThermoSense 400 White Woody X/ ThermoSense 400
White Woody M/ ThermoSense 400 White Woody S/ ThermoSense 400 White Woody T
Product reference: 01479/01480/01489/01490/01491/01492/01493/01494/01495/01496
Capacity: 1.7L
Rated power: 2500-3000 W
Voltage and frequency: 220-240 V ~ 50/60 Hz
Technical specications may change without prior notication to improve product quality.
Made in China | Designed in Spain
7. DISPOSAL OF OLD ELECTRICAL AND ELECTRONIC APPLIANCES
This symbol indicates that, according to the applicable regulations, the
product and/or batteries must be disposed of separately from household
waste. When this product reaches the end of its shelf life, you should dispose
of the batteries/accumulators and take them to a collection point designated
by the local authorities.
Consumers must contact their local authorities or retailer for information
concerning the correct disposal of old appliances and/or their batteries.
Compliance with the above guidelines will help protecting the environment.
8. TECHNICAL SUPPORT AND WARRANTY
Cecotec shall be liable to the end user or consumer for any lack of conformity that exists at the
time of delivery of the product under the terms, conditions, and deadlines established by the
applicable regulations.
It is recommended that repairs be carried out by qualied personnel.
If at any moment you detect any problem with your product or have any doubt, do not hesitate
to contact the ocial Cecotec Technical Support Service at +34 963 210 728.
Please note:
- Before serving water, wait until it stops boiling.
- Do not open the lid when serving.
4. CLEANING AND MAINTENANCE
- Always unplug the kettle from the mains supply before cleaning it.
- The exterior of the kettle can be cleaned with a slightly dampened cloth. Do not use powder
detergent or cleaning agents, as these could damage the product’s surface.
- Do not immerse the product, its power cord, plug or power outlet in water.
- If you observe mineral deposits such as limescale, we recommend following the steps
below:
1. Pour half a litre of 8 % white vinegar into the kettle and let it sit for 1 hour.
2. Pour the vinegar out and rinse the kettle with water 4 or 5 times.
3. Pour half a litre of water to be boiled and 25 ml of lemon juice into the kettle.
4. Let sit for 15 minutes and rinse again 4 or 5 times with clean water.
5. TROUBLESHOOTING
Problem Possible causes and solutions
It turns o
before boiling.
There might be scale inside the kettle. Clean and descale.
Inadequate amount of water in the kettle or empty kettle. In order to
reset the device again pour cold water into the kettle and wait 2 minutes;
then you can restart the kettle.
The kettle does
not work.
Make sure the plug is properly inserted into the socket and that the
socket is working.
If the power cord is damaged, contact the Technical Support Service of
Cecotec.
Run the kettle without water, the protection system of the device cuts
o the power supply.
The water
in the kettle
has a strange
smell.
This problem usually occurs when the kettle is used for the rst time. In
order to solve this problem, proceed in accordance with the cleaning and
maintenance section.
If the problem persists, ll the kettle with water up to the maximum
level, add two tablespoons of baking soda, and after boiling empty the
kettle.
