User Manual for Key Safe
WARNING
Read all instructions before using this safe.
-Test registered pin code a few times before closing
the safe door.
- Avoid leaving door open and unattended; it will allow
unauthorized individuals to reprogram the safe,
gaining full access to the safe and its contents.
- Store emergency keys in a secure place; NOT inside
of the safe.
- To maximize security and performance of the safe,
test pin code every 6 months.
- Test and make sure the safe works properly before
mounting. Once tested, mount the safe before use.
GETTING STARTED
Remove emergency keys and other included
accessories from packaging.
KEY ACCESS
1. To expose the key access, gently lift off the key cover
2. Use emergency key and insert into key hole, turn key
counter clockwise and turn handle clockwise.
BATTERY
Battery compartment is located on the inside of the door
safe.
1. Remove battery compartment cover.
2. Insert four new AA alkaline batteries into the battery
compartment and restore battery compartment cover.
Note: Do not mix new and old batteries
PIN CODE REGISTRATION
Safe retains only two 3-8 digit pin codes
1st Personal Pin Code
1. With safe open, press and release the initialization
button located on the inside of the safe door. Yellow
indicator light will be on.
2. On the key pad input your 3-8 digit pin code and
press and release either "A" or "B" to confirm. Yellow
indicator light will turn off.
2nd Personal Pin Code
1. On the keypad press “00” then press and release the
initialization button located inside of the safe door.
Yellow indicator light will be on.
2. On the key pad input your 3-8 digit pin code and
press and release either "A" or "B" to confirm. Yellow
indicator light will turn off.
TESTING REGISTERED PIN CODES
1. With safe door open, and the handle/lock knob in the
lock position. Enter in 1st personal pin code on the
key pad and press and release either "A" or "B"
to confirm.
Successful Save
- You will hear 2 short beeps
- The green indicator light will flash
- Move handle to the right to retract bolts
Unsuccessful Save
- You will hear 3 short beeps
- Handle will not move and bolts will stay extended
- Repeat steps CREATING PERSONAL PIN CODES
2. To test 2nd personal pin code, enter in 2nd personal
pin code on the key pad and press and release
either "A" or "B" to confirm. See “Successful Save”
and “Unsuccessful Save” above
3. Test a pin code that is not registered to make sure
the safe does not open to complete testing process
OPENING & CLOSING SAFE WITH PERSONAL PIN
CODES
OPEN:
1. On the key pad enter in either of your 3-8 digit pin
codes and press and release either "A" or "B"
to confirm.
2. Turn the handle/lock knob to the unlock position and
pull the safe door open
NOTE
After entering pin, you have 5 seconds to turn the knob
before the mechanism re-locks automatically
CLOSE:
To close safe, close door and turn knob to the lock
position
LOCK OUT
When the wrong pin code is entered 3 consecutive
times lock out mode will activate for 5 min; safe cannot
be used during this time; please wait or open with
emergency keys.
CHANGING PERSONAL PIN CODES
Follow steps in “PIN CODE REGISTRATION”
See reverse side for more information
©2024 BARSKA® | Pomona, CA 91767 | www.barska.com
A. Handle
B. Key Access
C. Indicator Lights
D. Key Pad
E. Key Drop Slot
- Located on the side of the safe
L
o
c
k
U
n
l
o
c
k
E
DCBA
1 2 3
4 5 6
7 8 9
A
0
B
3/24
BC711
LOW BATTERY WARNING
After entering correct personal code and the green and
red indicator lights are flashing this indicates that the
batteries are low. Follow steps in “BATTERIES”
NOTE
Safe may still be opened in low battery state depending
on battery voltage. If safe cannot be opened please use
emergency key. All registered pin codes remain stored
MOUNTING INSTRUCTIONS
The safe may be mounted to a wall. Be aware of the
load bearing. Failure to do so can result in personal
injury and/or damage to property. Use appropriate
tools when performing work and always use eye
protection.
- Do not mount the safe without anchoring to the wall.
- Find the studs in the wall, at your desired location.
Most studs are 16 inches or 24 inches apart.
- Check the wall for concealed wires or pipes.
- Measure the location of the pre-set drill holes; mark
their exact position onto the wall ensuring that the
studs or anything else behind will not interfere.
- Drill the appropriate size holes for the anchors you
are using.
- Carefully press the anchor into the holes at this time.
- Mount the safe by running screws from inside of the
safe and securing to anchors; ensure the safe is
mounted securely.
CARE AND MAINTENANCE
- Keep liquids away from the control panel. Spills on the
control panel will cause damage and possibly
electric shock.
- Secure safe in a proper area to prevent from falling
and causing damage or injury.
- DO NOT disassemble the product. For all repairs,
contact BARSKA Customer Service.
- DO NOT use chemicals or cleaning agents to clean
the safe.
- DO NOT over stuff the contents of the safe, it can
damage the motor mechanism or the contents
- DO NOT place emergency keys inside of safe
SAFE/LOCK BOX
BC767 3/24
BARSKA warrants this new safe/lock box to be free of defects
in material and/ or workmanship under normal use for a period
of twelve (12) months from the date product is purchased. This
limited warranty is delimited to repair or replacement only. This
warranty does not cover damage caused by improper
installation or maintenance. BARSKA disclaims all liability for
incidental or consequential damages resulting from misuse,
abuse, accident (such as dropping), fire, flood, service or
repairs other than those performed by BARSKA, acts of
nature, or arising out of any breach of this warranty. Altering
the product under any circumstances will automatically void
the warranty.
For service under this limited warranty, please have available
the proof of purchase and the purchase date and location as
well as a detailed description of the problem. This warranty is
not transferable and only applies to the original purchaser with
a proof of purchase from BARSKA or from an authorized
dealer. This warranty applies only to products purchased
within the United States, excluding Alaska, the Hawaiian
Islands and all U.S. territories in the Caribbean and the Pacific.
BARSKA will examine and go through troubleshooting
procedures, product repair or replacement of defective part(s)
or units with new part(s) or provide a new unit, if necessary,
during the warranty period. Reasonable shipping/handling
charges may apply and are based on Barska sole discretion.
Purchaser shall be required to prepay Shipping/handling
charges with a check or money order to BARSKA at time
product is returned. The Return Merchandise Authorization
Number (RMA#) and shipping/handling charge MUST be
obtained from BARSKA in advance of return. BARSKA shall
not be liable for damages or loss occurring during shipping.
Please visit via www.barska.com or call 909.445.8168 to
obtain the RMA#, Shipping/handling amount, and for more
information.
BARSKA reserves the right to modify or discontinue, without
prior notice to the purchaser, any model or style of the product.
BARSKA will determine, at its sole discretion, whether a
product will be repaired or replaced. BARSKA reserves the
right to discontinue or change any feature of its products at
any time. If an exact replacement or product is not available,
BARSKA reserves the right to provide a part or product that
matches as closely as possible.
LIMITATION OF REMEDIES
BARSKA disclaims any warranties, express or implied,
whether of merchantability or fitness for a particular use,
except as expressly set forth herein. The sole obligation of
BARSKA under this limited warranty shall be to repair or
replace the covered product, in accordance with the terms set
forth herein. BARSKA expressly disclaims any lost profits,
general, special, indirect or consequential damages which
may result from breach of any warranty, or arising out of the
use or inability to use any BARSKA product. Any warranties
which are implied and which cannot be disclaimed shall be
limited in duration to a term of one year from the date of
original retail purchase.
Some states do not allow the exclusion or limitation of
incidental or consequential damages or limitation on how long
an implied warranty lasts, so the above limitations and
exclusions may not apply to you.
BARSKA
855 Towne Center Drive, Pomona, CA 91767
1 YEAR LIMITED WARRANTY
Note: All information, feature, and specification displayed herein
are based on the data available at the time of publishing, thus
they are subject to change without notice. All product pictures
displayed herein are for illustration purposes only. The actual
product may vary due to different circumstances.
