1
9-Inch Portable Fan
Model:DK2301R
IMPORTANT SAFETY INSTRUCTIONS
BEFORE USING THIS FAN, READ THESE SAFETY
INSTRUCTIONS. SAVE THESE INSTRUCTIONS.
2
WARNING
1. To reduce the risk of personal injury, fan should not
be used where small children can reach. Close
supervision is necessary when any appliance is used
or near children.
2. Do not operate the fan in the presence of explosive
and/or flammable fumes.
3. Do not operate the fan if the product malfunctions, is
dropped or damaged in any manner.
4. Never dispose batteries in fire as batteries may
explode or leak.
5. Clean the battery contacts and device before the
installation.
6. To protect against electrical shock, do not use in a
window, immerse unit or spay with liquid.
7. When using this fan with an AC adaptor, use indoors
only.
8. Do not operate the fan with a damaged adapter. The
adapter is intended to be correctly oriented with a
vertical or floor mount position.
9. To avoid personal injury and property damage, use
only with adapter rated 9V DC 1A
3
10. Do not stick fingers or other objects inside the fan
grill.
CAUTION
1. Install batteries making sure the polarity is correct,
aligning the (+ and -) to similar markings in the unit.
2. Do not mix old and new batteries. Do not mix
Alkaline, standard (carbon-zinc), or rechargeable
(ni-cad, ni-mh, etc) batteries.
INSTRUCTIONS FOR USE
1. For best performance, use fresh Alkaline batteries (D
size, 6pcs required)
2. Use 6 D batteries (not included) or ETL listed 9V DC
1A output AC adapter (included for indoor use only).
Adapter jack is located on the left base side of the
fan.
3. To open battery compartment, turn the fan upside
down. Along with the arrows, slide the battery
compartment open and lift up (see Fig. 1). Install
6pcs D size batteries following (+) and (-) markings on
the battery compartment (see Fig. 2). Please refer to
numerical battery order for easy installation.
4
4. Press the button on top of the fan to select speed.
5. If the fan does not work, check that batteries are
installed properly.
ETL Listed 9V DC 1A Adapter Jack
Fig. 1 Fig. 2
PRODUCT NOTE
Please turn off the fan when not in use.
Remove batteries for storage. There are no
user-serviceable parts in this product.
Do not disassemble. To clean, use a soft damp cloth
to gently wipe the fan. Do not immerse the fan in
the water and never allow water to drop into the fan
5
housing.
TROUBLE SHOOTING
If the fan does not work, check that batteries are
installed properly.
If the fan does not work with AC adapter, check the
fan is turned ON and plug is fully inserted into the
jack and that the wall receptacle is powered ON.
WARNING
This device complies with part 15 of the FCC Rules,
Operation is subjected to the following two
conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation. (3)Imported by
Walmart Inc, Bentonville, AR72716.
www.walmart.com
Please note that changes or modifications not
expressly approved by the party responsible for
compliance could void the user’s authority to
operate the equipment.
6
NOTE: This equipment has been tested and found to
comply with the limits for a class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is
no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turn the equipment off and
on, the user is encouraged to try to correct the
interference by one or more of the following measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and
receiver.
--Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
--Consult the dealer or an experienced radio/TV
technician for help.
