Welcome
Thank you for choosing the RM2 Walking Vibration Pad.
This
device perfectly combines walking exercise with vibration functionality, allowing you to enjoy
professional-grade walking workouts at home.础er your workout, the soothing vib1ation helps relieve
muscle faligue, providing a comfortable recovery experience,
Specifications
Product Name
Model
Product Size
Running Area
Speed
Vibration Modes
Suitable Age
Incline Mechanism
Maximum Incline
Walking Vibration Pad
RM-02
ll25'573'95mm
420"1050mm
0.2-3.8 mph(0,3-6km/h
)
4 Modes
8一60 years old
2 Levels, Manual Adjustment
10%
G.w.
38
lbs
(17 kg
)
N.w.
31
lbs
(14
kg
)
Standard Bearing Capacity
Ultimate Bearing Capacity
Power
Peak Power
Voltage
Frequency
265 lbs (120 kg)
350 lbs {150
kg)
400W
1000W
120V
60 Hz
心It is not recommended to use over standard bearing
capacity.
Dear User,
Thank you once again for choosing our treadmill! We use a spliced design for the running belt to ensure
greater durablity and ease of maintenance, Due to the characteristics of materials from different batches,
there may be striped color differences at the splice. This is a normal phenomenon and does not affect the
product's performance.
Rest assured that all running belts are made from new materials and undergo strict quality inspections. We
are committed to p『oviding you with hig心uality p1oducts and services. If you have any questions or
need
support, please feel free to contact us.
Product & Accessories
Product
Running Belt
Rear End Cap
LED Display
Front End Cap
Power Socket
Power Switch
Handle
Screw holes for
belt adjustment Incline Bracket
Accessories
广
u.�-,
＿
一
-
岂
＠
User Manual
Wrench
Remote Controller
Lubricant
Caution: The user is cautioned that changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the equ
:
ipment.
FCC Compliance Statement:
This device complies with Part 15 of the FCC Rules, Operat
i
on is subject to the following two conditions
(1)
This device may not cause harmful interference, and
(2)
This device must accept any interference received, including interference that may cause undesired
operation.
NOTE:
This equipment has been tested andl found to comply with the lim胳for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation, This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause ha『mful
interference to radio communications. However, the『e is no guarantee that interference will not occur in a
particular installation,
If this equipment does cause harmful interfe『ence to radio or television reception, which can be
dete『mined by turning the equipment off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a ci『cuit different from that to which the receiver is connected.
•
Consult the dealer or an experienced radiofTV technician for
help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiat
i
on exposure limits set forth for a uncontrolled environment.
This transmitt
,
er must not be clocated or op心rating in conjunct
i
on with any other antenna or transmitter.
CAUTION-lio Reduce The Risk Of Injury From Moving Parts• Unplug
Before SeNicing.
WARNING -To Reduce the Risk of Electric Shock 一 Unplug Before Cleaning or SeNicing.
范三
RISK OF INJURY TO PERSONS-To Avoid Injury, use extreme caution when stepping onto or off of a
moving belt, Read Instruction Manual Before Using,
WARNING - Risk ol personal injury -Keep children under the age of 13 away from machine,
ISED RSS Warning:
This device complies with Innovation, Science and Economic Development Canada licence-exempt RSS
standard(s).
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device
must accept any interference, including interference that may cause undesired operation of the device.
L
e pr
é
sent appareil est conforme aux CNR d'ISED applicables aux appareils radio exempts de licence.
L
'exploitation est autoris
é
e aux deux conditions suivantes:
(1)l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radio
é
lectrique subi, m
ê
me si le brouillage est susceptible
d'en compromettre le fonctionnement.
ISED RF exposure statement:
This equipment complies with lSED radiation exposure limits set forth for an uncontroled
environment.The device has been evaluated to meet general RF exposure requirement.
L
e mat
é
riel est conforme aux imites de dose d'exposition aux rayonnements
é
nonc
é
s
pour fac un autre environnement.ce dispositif a
é
t
ê
é
valu
é
à
satisfaire l'exigence
g
é
n
é
rale de l'exposition aux rf.
