TUCH3618 | TUCH4818
TUCH MODELS
USE & CARE
MANUAL
THOR KITCHEN TUCH SERIES
PROFESSIONAL
RANGE HOODS
TUCH MODELS
TUCH3618 | TUCH4818
USE & CARE MANUAL
thorkitchen.com | #COOKLIKEAGOD
Thank you for choosing THOR KITCHEN. This product has been manufactured by Thor International, 4651
E Airport Drive, Ontario, CA 91761. This manual contains all the information you will need to install / use
the product correctly and safely. Please read all the instructions prior using the product, and keep this
manual in a secure place for future reference. Do not remove the attached adhesive identification label
containing code, model number, manufacturer and other information from the product. This label will
be used by the THOR KITCHEN authorized service representative in the event that your product needs
servicing.
Nous vous remercions d’avoir choisi THOR KITCHEN. Ce produit a été fabriqué par Thor International,
4651 E Airport Drive, Ontario, CA 91761. Ce manuel contient l’intégralité des consignes dont vous aurez
besoin pour installer / utiliser le produit correctement et en toute sécurité. Veuillez lire l’intégralité
des consignes avant toute utilisation du produit, puis conservez le présent manuel en lieu sûr afin de
pouvoir vous y reporter ultérieurement. Ne pas retirer du produit l’étiquette d’identification adhésive qui
contient le code, le numéro de modèle, le nom du fabricant et toute autre information. Ladite étiquette
sera utilisée par le représentant du service après-vente agréé de THOR KITCHEN au cas où votre produit
nécessiterait réparation ou entretien.
Gracias por elegir a THOR KITCHEN. Este producto fue fabricado por Thor International, 4651 E Airport
Drive, Ontario, CA 91761. Este manual contiene toda la información que necesitará para instalar / usar
el producto de manera adecuada y segura. Lea todas las instrucciones antes de usar el producto, y
mant
enga este manual en un lugar seguro para usarlo como referencia a futuro. No quite la etiqueta de
identificación adhesiva que contiene el código, número de modelo, fabricante y otros datos del producto.
El representante de servicio autorizado por THOR KITCHEN usará esta etiqueta en caso de que su
producto requiera reparaciones.
4
TABLE OF CONTENTS
IMPORTANT SAFETY NOTICE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
1.1 Read and Save These Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
1.2 Electrical Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
PRODUCT FEATURES / SPECIFICATION CHART. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
2.1 Product Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
2.2 Specification Chart. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
2.3 Circuit Diagram. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
2.4 Hood Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
EXPLODED DIAGRAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
LIST OF MATERIALS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
3.1 Parts Supplied. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
3.2 Optional Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
INSTALLATION GUIDELINES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
4.1 Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
4.2 Exhaust Duct . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
4.3 Position . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
OPERATING INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
BAFFLE FILTER INSTALLATION, REMOVAL AND MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
REPLACING LIGHT STRIP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
SURFACE MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
5.1 Surface Maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
5.2 Surface Cleaning and Maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
CAUTIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
6.1 Special Attention when Using the Range Hood . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
5
IMPORTANT SAFETY NOTICE
1.1 Read and Save These Instructions
WARNING
To reduce the risk of fire or electric shock, do not use this fan with any solid-state control device.
CAUTION
For general ventilating use only. Do not use to exhaust hazardous or explosive materials and vapors.
WARNING
To reduce the risk of fire, electric shock, or injury to persons, observe the following:
a. Use this unit only in the manner intended by the manufacturer. If you have questions, contact the
manufacturer.
b. Before servicing or cleaning the unit, turn off the power at the service panel and lock the service
disconnect to prevent accidental power activation. If locking the disconnect is not possible, securely
attach a prominent warning device, such as a tag, to the service panel.
WARNING
To reduce the risk of a range top grease fire:
a. Never leave surface units unattended at high settings. Boilovers cause smoking and greasy spillovers
that may ignite. Heat oils slowly on low or medium settings.
b. Always turn the hood ON when cooking at high heat or when flambeing food (i.e. Crepes Suzette, Cherries
Jubilee, Peppercorn Beef Flambe).
c. Clean ventilating fans frequently. Grease should not be allowed to accumulate on fan or filter.
d. Use proper pan sizes. Always use cookware appropriate for the size of the surface element.
WARNING
To reduce the risk of injury to persons in the event of a range top grease fire, observe the following*:
a. SMOTHER FLAMES with a close-fitting lid, cookie sheet, or metal tray, then turn off the burner. BE
CAREFUL TO PREVENT BURNS. If the flames do not go out immediately, EVACUATE AND CALL THE
FIRE DEPARTMENT.
b. NEVER PICK UP A FLAMING PAN - You may be burned.
c. DO NOT USE WATER, including wet dishcloths or towels - a violent steam explosion will result.
d. Use an extinguisher ONLY if:
1. You know you have a Class ABC extinguisher, and you already know how to operate it.
2. The fire is small and contained in the area where it started.
3. The fire department is being called.
4. You can fight the fire with your back to an exit.
* Based on "Kitchen Fire Safety Tips" published by NFPA.
6
IMPORTANT SAFETY NOTICE
WARNING
To reduce the risk of fire, electric shock, or injury to persons, observe the following:
a. Installation work and electrical wiring must be done by qualified person(s) in accordance with all
applicable codes and standards, including fire-rated construction.
b. Sufficient air is needed for proper combustion and exhausting of gases through the flue (chimney)
of fuel burning equipment to prevent back drafting. Follow the heating equipment manufacturer’s
guideline and safety standards such as those published by the National Fire Protection Association
(NFPA), and the American Society for Heating, Refrigeration and Air Conditioning Engineers
(ASHRAE), and the local code authorities.
c. When cutting or drilling into wall or ceiling, do not damage electrical wiring and other hidden utilities.
d. Ducted fans must always be vented to the outdoors.
e. NEVER place a switch where it can be reached from a tub or shower.
f. Make sure the power is off before installing, wiring or maintenancing
To Reduce The Risk Of Fire, Electric Shock Or Injury To Persons, Do Not Use Replacement Parts
That Have Not Been Recommended By The Manufacturer (e.g. Parts Made At Home Using A 3D Printer).
WARNING
WARNING
To reduce the risk of fire, use only metal ductwork.
CAUTION
To reduce risk of fire and to properly exhaust air outside - Do not vent exhaust air into spaces within
This appliance must be grounded. In the event of an electrical short circuit, grounding reduces the risk of
electric shock by providing an escape wire for the electric current. This appliance is equipped with a cord having
a grounding wire with a grounding plug. The plug must be plugged into an outlet that is properly installed
and grounded.
WARNING - Improper grounding can result in a risk of electric shock.
Consult a qualified electrician if the grounding instructions are not completely understood, or if doubt exists as
to whether the appliance is properly grounded.
Do not use an extension cord. If the power supply cord is too short, have a qualified electrician install an outlet
near the appliance.
GROUNDING INSTRUCTIONS
walls, ceilings, attics, crawl spaces or garages
OPERATION
Always leave safety grilles and filters in place. Without these components, operating blowers could catch
onto hair, fingers and loose clothing. The manufacturer declines all responsibility in the event of failure
to observe the instructions given here for installation, maintenance and suitable use of the product. The
manufacturer further declines all responsibility for injury due to negligence and the warranty of the unit
automatically expires due to improper maintenance.
CALIFORNIA PROPOSITION 65 WARNING
WARNING
This appliance contains chemicals known to the State of California to
cause cancer and/or reproductive harm, and birth defects or other
reproductive harm. For more information go to www.P65Warnings.
ca.gov.
7
IMPORTANT SAFETY NOTICE
1.2 Electrical Requirements
Important: Observe all governing codes and ordinances.
It is the customer’s responsibility:
- To contact a qualified electrical installer.
- To assure that the electrical installation is adequate and in conformance with National Electrical
Code, ANSI/NFPA 70 latest edition* or CSA standards C22.1-94, Canadian Electrical Code, Part 1 and
C22.2 No.0-M91 - latest edition** and all local codes and ordinances.
* National Fire Protection Association Batterymarch Park, Quincy, Massachusetts 02269
** CSA International 8501 East Pleasant Valley Road, Cleveland, Ohio 44131-5575
If codes permit and a separate ground wire is used, it is recommended that a qualified electrician
determine that the ground path is adequate.
Do not ground to a gas pipe.
Check with a qualified electrician if you are not sure the range hood is properly grounded.
Do not have a fuse in the neutral or ground circuit.
This appliance requires a 120V / 60Hz electrical supply and connected to an individual properly grounded
branch circuit protected by a 15 or 20 ampere circuit breaker or time delay fuse. Wiring must be 2 wire
with ground. Please also refer to Electrical Diagram on product.
A cable locking connector (not supplied) might also be required by local codes.
Check with local requirements, purchase and install appropriate connector if necessary.
PRODUCT FEATURES / SPECIFICATION CHART
2.1 Product Features
1. 6-speed options.
2. Dual level lighting: Bright, Dim and Off.
3. Gesture control function: Turn On and Off, adjust the fan speed.
4
. Heat sensor: Automatically detect temperature and turn on and off the hood.
8
PRODUCT FEATURES / SPECIFICATION CHART
2.2 Specification Chart
2.3 Circuit Diagram
Models TUCH3618 / TUCH4818
Net Weight (lbs) 56.2lbs / 67.2lbs
Product Dimension (inches)
Cutout Dimension (inches)
(W)35-7/8 x (D)24" x (H)18"
(W)47-7/8 x (D)24" x (H)18"
Maximum Voltage 120V – 60Hz
[W]10" x [D]11"
Exhaust Pipe Diameter Round 8 inches
Light 6W LED x2 for 36", x4 for 48"
Certification
TUCH3618
9
PRODUCT FEATURES / SPECIFICATION CHART
2.4 Hood Specifications
TUCH4818
10
EXPLODED DIAGRAM
8in Round Collar (1)
PC Board (1)
Capacitor (1)
Touch Control (1)
6W LED
(2 for 36", 4 for 48")
Power Cord (1)
Hood Body (1)
Blower (1)
Baffle Filter
(2 for 36", 3 for 48")
Hardware Package (1)
11
LIST OF MATERIALS
TUCH3618 | TUCH4818
TUCH MODELS
USE & CARE
MANUAL
3.1 Parts Supplied
3.2 Optional Accessories
Standard configuration Hardware package content
Hood 1
#6 x 1" Wood Screw
#6 x 1-1/2" Wood Screw
#6 x 2" Wood Screw
M4 x 8mm Truss Head
Screw
User Manual 1
4
4
4
4
8” round Duct Collar 1
Hardware Package
1
Description
24-inch
Height Duct Cover
36”
48”
36”
48”
RHDC36TU24
RHDC48TU24
TRC3618
TRC4818
Recirculating Kit
Part Number
RHDC model
FT3648TUCharcoal Filter
12
INSTALLATION GUIDELINES
4.1 Location
•
Air turbulence from window/door may reduce the effectiveness of hood. It is suggested to close window/door
before using hood. (FIG. 1)
•
The smoke has to rise up to 10 inches from cook top in order to reach hood's suction efficiency range.
1
4.2 Exhaust Duct
•
8" diameter exhaust duct is recommended to use in order to maximize suction efficiency reduce gap.
.
•
Before installing the range hood, securely attach the duct collar to the vent opening on the top of the range
hood using heat-resistant metal tape.
•
Once the duct collar is in place, connect the exhaust duct to the collar and seal all joints with heat-resistant
metal tape to ensure a tight, secure fit.
13
INSTALLATION GUIDELINES
4.3 Position
•
The installation height is measured vertically from the center of the hood's baffle filter to the surface
of the cooktop.
•
The min height is 24 inches and the max installation height is 36 inches for gas hob. (FIG. 2)
•
Avoid left-right or front-dropped inclination.
2
36”
24” min.
36” max.
14
OPERATING INSTRUCTIONS
On / Off Fan Down Fan Up Delay Off Lights
WARNING
When the sensor encounters heavy smoke or is obscured by an object, there is a chance to activate the
gesture function to automatically turn on the hood.
Gesture Control Operation
When the Fan is Off
- Wave your hand in front of the control panel from left to right, the hood will turn on at speed 1.
- When turning off the fan, there is no action when swiping to the left.
- The hood has a memory function to remember the last used settings for the fan and lights.
When the Fan is On
- Increase Fan Speed: Wave your hand from left to right in front of the control panel to increase the fan speed.
-
Decrease Fan Speed: Wave your hand from right to left to decrease the fan speed.
- Turn Off the Hood: When the fan is set to speed 1, swiping your hand from right to left will turn off both the fan
and the lights.
NOTICE
- The distance between hand and the sensor should be no more than 4 inches.
- The sensors are located at the right and left of the control panel.
Heat Sensor
This hood is equipped with a Heat Sensor.
- Automatic Fan Activation: When the hood is turned off, the fan will automatically start at speed 3, if
the heat sensor detects a temperature exceeding 55°C (131°F) above the cooking surface. The fan will
turn off automatically when the temperature drops to 40°C (104°F).
- Temporary Sensor Disable: If the heat sensor detects a temperature exceeding 55°C (131°F) while the
hood is off, and you adjust the fan speed or use the delay-off function, the sensor will be temporarily
disabled for 20 minutes. After this period, the sensor will reactivate and resume monitoring.
NOTICE
The heat sensor will be disabled when you press the fan up/down buttons or the delay off
button.
1. Power Control
- Power On/Off: Press the button to turn the entire hood (fan and lights) on or off.
- Memory Function: The hood will remember the last fan speed and light level set before it was turned off.
On / Off Fan Down Fan Up Delay Off Lights
15
OPERATING INSTRUCTIONS
Control Panel Lock Function
- Activate the control panel lock function
With the hood turned off, press and hold the On/Off button for 3 seconds to activate the control panel lock
function. All fan speed indicators will light up.
- Deactivate the control panel lock function
To deactivate the control panel lock function, press and hold the On/Off button for 3 seconds. All fan speed
indicators will turn off.
NOTICE
When the control panel lock function is activated, all buttons on the control panel, including
gesture functions, will be disabled. This feature is intended for use during surface cleaning to
prevent accidental activation of the hood.
2. Speed Selection Button
Fan Down
- Press to decrease fan speed from 6, 5, 4, 3, 2, 1, off.
Fan Up
- Press to increase fan speed from 1, 2, 3, 4, 5, 6.
3. Delay Off
- While the fan is running, press and hold the Delay Off button for 2 seconds to activate the Delay Off function.
All fan speed LED indicators will blink slowly.
- In this mode, use the Fan Down or Fan Up button to set the delay time between 2 to 12 minutes
(default is 2 minutes).
- The selected delay time is represented by the blinking fan speed LED indicator. For example,
selecting 2 = slow blink of fan speed 1.
- The Delay Off timer will automatically confirm the setting if no adjustments are made within 5 seconds.
- During the Delay Off countdown, the fan will switch to speed 1. You can change the fan speed using the
gesture control or by pressing the Fan Down or Fan Up button.
- After the timer expires, the fan and lights will power off.
NOTICE
When the Delay Off function is operating, press the Delay Off button to disable the Delay Off function,
pressing On/Off button will turn off the entire hood and Delay Off function.
4. Lights
- Press to change lighting level from Low, High, Off.
16
OPERATING INSTRUCTIONS
5. Filter Cleaning Reminder
- After 30 hours of fan operation, the fan speed LED indicators will flash slowly to indicate that the filters
require cleaning.
- Press and hold the Lights button for 3 seconds to clear the symbol after the filter has been cleaned.
NOTICE
The fan speed LED indicator will continue blinking after the fan is turned off until the Lights button is
pressed and held for 3 seconds to clear the reminder.
BAFFLE FILTER INSTALLATION, REMOVAL AND
MAINTENANCE
Installing the Baffle Filters
1. Insert the filter into the top groove of the liner, ensuring it is properly aligned. Pull the filter towards the front
of the liner using the handles.
2. Tilt the back of the filter upward so it is angled within the liner.
3. Slide the back of the filter into the channel at the rear of the liner to securely lock it in place.
1 2 3
17
BAFFLE FILTER INSTALLATION, REMOVAL AND MAINTENANCE
BAFFLE FILTER INSTALLATION, REMOVAL AND
MAINTENANCE
Removing the Baffle Filters
1. Pull the filter toward the front of the liner.
2. Pivot the rear of the filter downward.
3. Slide the filter out of the channel at the front of the liner to remove it.
Cleaning the Baffle Filters
The filters are designed to capture grease and cooking residue. While they generally do not require replacement,
they should be cleaned every 30 days, or more frequently depending on usage.
Filters can be cleaned either in the dishwasher on a low-heat setting or by soaking them in hot, soapy water.
Ensure the filters are thoroughly dried before reinstalling them into the hood.
REPLACING LIGHT STRIP
LED Light:
For LED light strip replacement or service, please contact Thor Kitchen customer service or parts
department at (877) 288 - 8099.
WARNING
Improper installation, service, or maintenance may cause injury or damage. Refer to this manual for
detailed instructions. All other service should be performed by an authorized service provider.
Failure to follow these instructions can result in serious injury, fire, or electrical shock.
1. After turning off the power, remove baffle filters.
2. To remove the side panel, remove the two screws on both sides (as shown in the figure below).
1 2 3
18
REPLACING LIGHT STRIP
3. To remove the light panel, remove the two screws on both sides (as shown in the figure below).
19
REPLACING LIGHT STRIP
4. In order to remove the light panel, press the light panel down and then pull it forward to remove.
2
1
5. Disconnect the LED light quick connector.
6. Simultaneously press the clips on both sides of the LED light strip and gently remove it.
Push the clip
20
SURFACE MAINTENANCE
5.1 Surface Maintenance
1. Please clean the range hood surface regularly with warm soapy water and wipe with a cotton cloth to
prevent grease from accumulating.
2. Please do not use harsh cleansers or coarse material to clean the surface because that will damage
the surface.
3. A non-invasive stainless steel polish is recommended to polish the surface after cleaning.
4. Please use soft material for polishing because it will make your range hood surface shinier.
5. Please do not use cleaning solutions that have bleach as an ingredient.
5.2 Surface Cleaning and Maintenance
1. Always disconnect from power supply before cleaning.
2. Clean both the exterior and interior of the hood regularly to ensure durability. Avoid using abrasive cleaners.
3. Make a habit of turning on the hood first before turning on the stove to avoid high temperature in the
kitchen.
CAUTIONS
6.1 Special Attention when Using the Range Hood
•
The range hood must be turned on every time before cooking to ensure maximum ventilation effect.
•
If there is damage to the power cord, removing and changing the power cord must be handled by the
manufacturer, installer or a qualified electrician.
•
When the range hood, gas stove,or other fuel appliances are being used simultaneously, there must
be good ventilation in the kitchen.
•
Failure to clean the range hood according to the instructions in the manual may result in a fire hazard.
•
Do not light a fire directly under the range hood
.
•
The exhaust gas from the range hood can’t be fed into the exhaust channel of the gas stove or any
other appliances.
•
The minimum distance required between the top of the stove and the bottom of the range hood is
24 inches. If the range installation manual states that more distance are required, it must be taken
into consideration. Adjust range hood to appropriate height for complete emission of exhaust
.
•
To avoid injury or damage, all components of the range hood must be disassembled using appropriate tools.
Do not attempt to disassemble any parts with bare hands.
21
TROUBLESHOOTING
Problem Possible cause Solution
Motor stops running No power (burned wire) or
burned fuse.
Replace the PC board.
Check power meter (replace power cord).
Motor temperature regulator
is off and can’t be recovered.
Replace motor.
Motor copper wire is burned. Replace motor.
Defective capacitor. Replace capacitor.
Motor speed slows
down automatically
Distorted capacitor or low
power.
Replace capacitor.
Defective motor. Replace motor.
Inverted fan blades Short circuit on the motor. Replace motor.
Air comes out of the air outlet
instead of being sucked up.
Air outlet or exhaust pipe is blocked and
needs cleaning.
Motor doesn’t
regulate speed
Defective capacitor. Replace capacitor.
Electrical wiring is off. Fix the electrical wires.
Motor runs on and
off
Motor stops running when
it reaches unusually high
temperature, and starts
again when it cools down to
normal cooking temperature.
This is cause by temperature
running too high during
cooking.
Recommend changing your cooking
routine slightly.
Replace motor.
Two sections of
the LED light not
working
LED light failed. Replace LED light.
22
WARRANTY
Warranty & Service
This product has been manufactured by Thor International, 4651 E Airport Drive, Ontario, CA 91761
For Customer Service, please call (877) 288 - 8099
For the most up to date warranty and service policy, please refer to our website
WWW.THORKITCHEN.COM/WARRANTY-REGISTRATION
For in-warranty service requests, please visit our website at
WWW.THORKITCHEN.COM/SERVICE
Please Note: You must provide proof of purchase or installation date for any in-warranty service requests.
WELCOME
TO THE CLUB
You chose THOR Kitchen to enhance your culinary journey and
we’re stoked to have you in the club. Think of it as a secret society
of really savvy people, such as yourself, choosing professional
power and performance at an affordable price.
Register your product by following the steps below.
WARRANTY NEED PARTS?
01
02
Scan the QR code or visit
thorkitchen.com/warranty
Input your product info
and select register
You’re done.
Let’s get cookin’.
03
WARRANTY REGISTRATION
