Frigidaire GRFS287DAF Gallery 28 Cu. Ft. Standard-Depth User Manual

FRIDGE FREEZER

User Manual

Safety Important Information.............................2

Features............................................................5

Installation.........................................................6

Door Removal................................................... 9

Door Handle Installation..................................13

Water Supply Connection............................... 14

Controls and Settings: Internal

Water Dispenser............................................. 16

Controls and Settings: External Water

Dispenser Model............................................. 18

Automatic Ice and Water Dispenser............... 21

Internal Water Dispenser................................ 24

Ice Maker........................................................ 25

Storage Features............................................ 26

Storing Food and Saving Energy.................... 30

Normal Operating Sounds.............................. 31

Filter Replacement..........................................32

Care and Cleaning.......................................... 35

Troubleshooting.............................................. 38

Limited warranty..............................................44

Welcome to our family

Thank you for bringing Frigidaire into your

home! We see your purchase as the beginning

of a long relationship together.

This manual is your resource for the use and

care of your product. Please read it before

using your appliance. Keep it handy for quick

reference. If something doesn’t seem right, the

troubleshooting section will help you with

common issues.

FAQ, helpful tips and videos, cleaning

products, and kitchen and home accessories

are available at http://www.frigidaire.com.

We are here for you! Visit our website, chat

with an agent, or call us if you need help. We

may be able to help you avoid a service visit. If

you do need service, we can get that started

for you.

Let’s make it official! Be sure to register your

product.

Keep a record for quick reference

Model number

..........................................................

Serial number

..........................................................

Purchase date

..........................................................

Serial number location

WARNING!

You must follow these guidelines to ensure

that your refrigerator’s safety mechanisms

are operating correctly.

Safety definitions

This is the safety alert symbol. It is used to

alert of potential personal injury hazards. Obey

all safety messages that follow this symbol to

avoid possible injury or death.

DANGER

DANGER indicates an imminently hazardous

situation which, if not avoided, will result in

death or serious injury.

WARNING!

WARNING indicates a potentially hazardous

situation which, if not avoided, could result in

death or serious injury.

CAUTION!

CAUTION indicates a potentially hazardous

situation which, if not avoided, may result in

minor or moderate injury.

IMPORTANT

IMPORTANT indicates installation, operation

or maintenance information which is impor‐

tant but not hazard-related.

DANGER

DANGER Risk of fire or explosion. Flamma‐

ble refrigerant used. Do not use mechanical

devices to defrost refrigerator. Do not punc‐

ture refrigerant tubing.

DANGER Risk of fire or explosion. Flamma‐

ble refrigerant used. To be repaired only by

trained service personnel. Use only manu‐

facturer-authorized service parts. Any repair

equipment used must be designed for flam‐

mable refrigerants. Follow all manufacturer

repair instructions. Do not puncture refriger‐

ant tubing.

CAUTION!

CAUTION Risk of fire or explosion. Dispose

of refrigerator properly in accordance with

the applicable federal or local regulations.

Flammable refrigerant used.

CAUTION Risk of fire or explosion due to

puncture of refrigerant tubing. Follow han‐

dling instructions carefully. Flammable refrig‐

erant used.

SAFETY IMPORTANT INFORMATION

WARNING!

CALIFORNIA RESIDENTS ONLY

WARNING! Cancer and Reproductive Harm

www.P65Warnings.ca.gov

Child safety

This appliance is not intended for use by

persons (including children) with reduced

physical, sensory or mental capabilities, or lack

of experience and knowledge, unless they

have been given supervision or instruction

concerning use of the appliance by a person

responsible for their safety.

Destroy or recycle the carton, plastic bags, and

any exterior wrapping material immediately

after the refrigerator is unpacked. Children

should never use these items to play. Cartons

covered with rugs, bedspreads, plastic sheets

or stretch wrap may become airtight chambers,

and can quickly cause suffocation.

Important safety instructions

Do not store or use gasoline or other

flammable vapors and liquids in the vicinity of

this or any other appliance.

Do not store explosive substances such as

aerosol cans with a flammable propellant in

this appliance.

Do not operate the refrigerator in the presence

of explosive fumes

Avoid contact with any moving parts of

automatic ice maker.

Remove all staples from the carton. Staples

can cause severe cuts, and also destroy

finishes if they come in contact with other

appliances or furniture.

WARNING!

Do not use electrical appliances inside the

food storage compartments of the appliance

unless they are of the type recommended by

the manufacturer.

Proper disposal of your

refrigerator or freezer

Risk of child entrapment

Child entrapment and suffocation are not

problems of the past. Junked or abandoned

refrigerators or freezers are still dangerous –

even if they will sit for “just a few days”. If you

are getting rid of your old refrigerator or

freezer, follow the instructions below to help

prevent accidents.

We strongly encourage responsible appliance

recycling/disposal methods. Check with your

utility company or visit www.energystar.gov/

recycle for more information on recycling your

old refrigerator.

Before you throw away your old

refrigerator/freezer:

• Remove doors.

• Leave shelves in place so children may not

easily climb inside.

• Have it removed by a qualified service

technician.

IMPORTANT

CFC/HCFC Disposal

Your old refrigerator may have a cooling sys‐

tem that used CFCs or HCFCs (chlorofluoro‐

carbons or hydrochlorofluorocarbons). CFCs

and HCFCs are believed to harm strato‐

spheric ozone if released to the atmosphere.

Other refrigerants may also cause harm to

the environment if released to the atmos‐

phere.

If you are throwing away your old refrigera‐

tor, make sure the refrigerant is removed for

proper disposal by a qualified technician. If

you intentionally release refrigerant, you may

be subject to fines and imprisonment under

provisions of environmental legislation.

SAFETY IMPORTANT INFORMATION

Electrical information

IMPORTANT

Pressing and holding the On/Off button for

three seconds, located on the temperature

control panel, will disable the appliance cool‐

ing system but does not disconnect the pow‐

er to the light bulb and other electrical com‐

ponents. To turn off power to the appliance

you must unplug the power cord from the

electrical outlet.

• The appliance must be plugged into its own

dedicated 115 Volt, 60 Hz., 15 Amp, AC

only electrical outlet. The power cord of the

appliance is equipped with a three-prong

grounding plug for your protection against

electrical shock hazards. It must be plugged

directly into a properly grounded three-

prong receptacle. The receptacle must be

installed in accordance with local codes and

ordinances. Consult a qualified electrician.

Avoid connecting the appliance to a Ground

Fault Interrupter (GFI) circuit. Do not use an

extension cord or adapter plug.

• If the power cord is damaged, it should be

replaced by an authorized service

technician to prevent any risk.

• Never unplug the appliance by pulling on

the power cord. Always grip the plug firmly,

and pull straight out from the receptacle to

prevent damaging the power cord.

• Unplug the appliance before cleaning and

before replacing the light bulb to avoid

electrical shock.

• Performance may be affected if the voltage

varies by 10% or more. Operating the

appliance with insufficient power can

damage the compressor. Such damage is

not covered under your warranty.

• Do not plug the unit into an electrical outlet

controlled by a wall switch or pull cord to

prevent the appliance from being turned off

accidentally.

WARNING!

Do not, under any circumstances, cut, re‐

move, or bypass the grounding prong (A). Al‐

ways use the power cord with a three-prong

grounded plug and grounding type wall re‐

ceptacle.

SAFETY IMPORTANT INFORMATION

IMPORTANT

Features may vary by model.

Accessories are available for your appliance and may be purchased at Frigidaire.com or by

calling toll-free 1-800-374-4432.

External Water Dispenser Model

Freeze

13 14 15

9 10 11 1287

Ice/Water Dispenser

External Appliance Control Display

Water Filter

Condiment Bin

L-Shaped Bin

Dairy Bin

Flipper Mullion

Gallon Bin

Slim Bin

Ice Maker Bin

Flipper Guide

Air Filter

Edge-to-Edge Glass Shelf

Door Bins

Crispers

Adjustable Temp Drawer Control

Adjustable Temp Drawer

Freezer Ice Maker

Upper Freezer Baskets

Lower Freezer Baskets

Internal Water Dispenser Model

10 11 129 13 14

158

Appliance Control Display

Condiment Bin

L-Shaped Bin

Dairy Bin

Internal Water Dispenser

Standard Bin

Flipper Mullion

Water Filter

Edge-To-Edge Glass Shelf

Flipper Guide

Air Filter

Slide-Under 1/2-Width Shelves

Crispers

Adjustable Temp Drawer Controls

Adjustable Temp Drawer

Freezer Ice Maker

Upper Freezer Basket

Lower Freezer Basket

FEATURES

This User Manual provides general installation

and operating instructions for your model. We

recommend using a service or kitchen

contracting professional to install your

appliance. Use the appliance only as instructed

in this User Manual. Before starting the

appliance, follow these important first steps.

Installation Checklist

Doors

❐ Handles are secure and tight

❐ Door seals completely the cabinet on all

sides

Leveling

❐ Refrigerator is level side-to-side and slightly

elevated in front to assist with door and

drawer closing. Front should be higher than

back.

❐ Cabinet is setting solid on all corners

Electrical Power

❐ House power is turned on

❐ Appliance is plugged in

Ice Maker

❐ House water supply is connected to the

appliance

WARNING!

Potable water supply only.

❐ No water leaks present in any connections

- recheck in 24 hours

❐ Ice maker is turned on

❐ Ice and water dispenser operates correctly

Final Checks

❐ Shipping material is removed

❐ Refrigerator and freezer temperatures are

set

❐ Registration card is sent in

Tools necessary

These tools are necessary at different stages

of the installation process:

A. Adjustable Wrench

B. 3/8" Fixed Wrench

C. 3/8" and 1/4" Socket Wrench

D. Screwdriver: Phillips™ Head or Quadrex

Head

E. 6 mm Allen Wrench

Components Provided

A. Top hinge screw

B. Top hinge cover front screw

C. Top hinge cover rear screw

D. Lower hinge screw

Location

• Choose a place that is near a grounded,

non-GFCI, electrical outlet. Do not use an

extension cord or an adapter plug.

• If possible, place the appliance out of direct

sunlight and away from the range,

dishwasher, or other heat sources.

• The appliance must be installed on a floor

that is level and strong enough to support a

fully loaded appliance.

• Consider water supply availability for

models equipped with an automatic ice

maker.

WARNING!

This appliance is intended for use in residen‐

tial household and similar interior applica‐

tions such as:

• Kitchen / kitchenette

• Pantry room

• Basement

• Enclosed garage

• Other interior residential type environ‐

ments

CAUTION!

Do not install the appliance where the tem‐

perature will drop below 55°F (13°C) or rise

above 110 °F (43 °C). The compressor will

not be able to maintain proper temperatures

inside the appliance.

WARNING!

Allow the following clearances for ease of in‐

stallation, proper air circulation, and plumb‐

ing and electrical connections:

• Sides and top 3/8" (9.5 mm)

• Back 1" (25.4 mm)

INSTALLATION



NOTE

If you place the appliance with the door

hinge side against a wall, you may have to

allow additional space so the door can be

open wider.

Door opening

Position the appliance to allow easy access to

a counter when removing food. Make sure the

refrigerator drawers and freezer baskets can

be fully open.

Cabinet leveling and door

alignment

Guidelines for final positioning of appliance:

• All 4 corners of the cabinet must rest firmly

on the floor.

• Slightly elevate the front to ensure that

doors close and seal properly.

• Align the doors with each other and level

them.

You can meet most of these conditions by

raising or lowering the adjustable front rollers.

Leveling

Level the cabinet by raising or lowering the

adjustable front rollers.

1. Slightly open freezer drawer to reveal

adjustable rollers at bottom of cabinet.

2. Use the front roller height adjusting screws

to make initial cabinet adjustments. Use a

3/8" socket wrench to turn the adjustment

screws (1 per side).

• Turn adjustment screw clockwise to

raise the unit.

• Turn adjustment screw

counterclockwise to lower the unit.

3. Ensure both doors are bind-free with their

seals touching the cabinet on all 4 sides

and that cabinet is stable.

4. After unit is leveled, lower the anti-tip leg

(A) until it firmly contacts the floor. An

adjustable wrench may be necessary for

adjustment.

Door leveling



NOTE

Product is shipped with doors adjusted to the

lowest position on the hinges.

To make final door height adjustments:

1. Open freezer drawer to access hinges for

fresh food doors.

2. Insert 6 mm Allen wrench into the shaft of

the lower hinge (included with unit).

• Turn the adjustment screw clockwise

from underneath to raise the door.

• Turn adjustment screw counter-

clockwise from underneath to lower the

door.

Flipper mullion

Adjust the flipper mullion for proper connection

with the mullion guide. Ensure the flipper

mullion is folded and perpendicular to the fresh

food door. If the mullion guide is not in the

correct position, it could prevent the door from

closing completely.

INSTALLATION

To adjust the flipper mullion:

1. Loosen the 2 screws located on the flipper

mullion hinge.

2. Adjust the flipper mullion height. For proper

connection with the flipper mullion guide,

there should be a separation about the

thickness of a coin (0.060", or 1.5 mm)

between the guide (B) and flipper mullion

(A).

0.060”

(1.5 mm)

3. Retighten the screws.

INSTALLATION

Getting through narrow spaces

If your appliance does not fit through an

entrance area, you can remove the doors.

Check first by measuring the entrance.

Removing/Installing refrigerator

doors

To prepare for removing the doors:

1. Unplug the electrical power cord from the

wall outlet.

2. Remove any food from the door shelves

and close the doors.

WARNING!

Make sure the electrical power cord is un‐

plugged from the wall outlet.

To remove refrigerator doors:

1. Remove the 3 screws from both hinge

covers on the left and right top of the

cabinet. Be careful not to damage electrical

connections or sensors.

2. After the hinge covers are removed,

disconnect any harnesses between the

cabinet and doors by grasping both sides

of the connector firmly, depress the latch

and pull apart.

Dispenser Model Left/Right Door

Non-Dispenser Model Left/Right Door

3. Trace lightly around the door’s top hinges

with a pencil. This makes reinstallation

easier.

DOOR REMOVAL

4. Remove bulkhead cover at rear of unit to

access water tubing. Disconnect the water

tube at the push-lock connection on the

rear of the unit below the bulkhead. The

dispenser line is connected to the yellow

water line coming from the main water

valve.

5. Pull the water tube out of the conduit from

the top of the cabinet.



NOTE

You will be pulling approximately five feet of

water tube from the back of the refrigerator.

Use care while pulling the water tube from

the unit to be sure that you do not kink the

tube.

6. Open both doors to a 90° angle.

90˚

CAUTION!

Be sure doors are set aside in a secure posi‐

tion where they cannot fall and cause per‐

sonal injury, or damage to the doors or han‐

dles.

7. Remove hex screws from top hinge plate,

then remove the top hinge.

8. Lift doors off bottom hinges and set aside.

9. Unscrew the three bottom hinge screws

and remove the bottom hinges.

To install refrigerator doors:

1. Replace 3 bottom hinge screws and hinges

on both sides of the cabinet. Ensure

screws are tightly snug to hinges on both

sides of the cabinet before reinstalling

doors.

DOOR REMOVAL

2. Holding the door at a 90° angle, drop the

pin (A) down into the bottom hinge opening

(B). Rotate it slightly in either direction until

the door falls onto the hinge and is fully

seated.



NOTE

When reinserting the water tube and replac‐

ing the top hinge cover, use care to be sure

you do not kink the tube. The water line may

also be difficult to pass back through the

conduit inside the cabinet.



NOTE

Upon replacement, the tube needs to be fully

inserted up to the marking line.

3. Reinstall top hinges and screws.

4. Insert and feed water line back into the

conduit at the top left door hinge until tube

reappears at rear of unit.

5. Reconnect all harnesses.

6. Replace top hinge covers and screws.

7. Reconnect water line to push-lock

connection and reinstall water line

bulkhead cover at rear of unit.

8. Reconnect electrical power cord to the wall

outlet.

To reset door pin

If doors are removed at less than a 40° angle,

the pin returns to the home position. It can be

reset by turning the door upside down and

using a 5/32" Allen wrench to rotate the left

hand pin 90° clockwise and the right hand pin

90° counterclockwise.

Once the door pins are reset, refer to

Removing/Installing refrigerator doors.

Removing/Installing freezer drawer

CAUTION!

The drawer is heavy. Use caution when lift‐

ing.

To remove the drawer:

1. Remove the 4 hex head drawer screws (2

per side) securing the drawer to the slide

assemblies.

2. Lift up drawer to remove it.

CAUTION!

Do not loosen or remove the 3 hex screws.

DOOR REMOVAL

To install the freezer drawer:

1. Extend the freezer slides from the unit.

2. Carefully align support pin with hooks on

end of freezer slides and then lower

freezer door onto slides.

3. Replace the 4 hex head screws that secure

the slides to the door (2 on each side) and

tighten.



NOTE

To locate the pin, look inside the drawer and

the pin is next to the door liner and the

slides. Not all parts are shown in the illustra‐

tion.

DOOR REMOVAL

CAUTION!

Wear gloves and safety goggles. Use ex‐

treme caution when installing these handles.

The rounded end of the handles may be

sharp (some models).

Door handle installation

To install the door handle:

1. Remove the handles and any other

protective packaging from the carton.

2. Position the handle end caps over upper

and lower preinstalled shoulder bolts (A)

that are fastened into door, ensuring the

holes for the set screws are facing towards

the opposite door.

3. While holding handle firmly against door,

fasten upper and lower Allen set screws

(B) with supplied Allen wrench.

4. Repeat the steps above to install the

opposite handle. Ensure the holes for the

set screws are facing towards the opposite

door.



NOTE

When tightening the Allen set screws, apply

force to the longer arm of the Allen wrench

supplied in the handle packaging.

Freezer drawer handle installation

To install the drawer handle:

1. Position freezer handle end caps over left

and right preinstalled shoulder bolts (C)

that are fastened to the door, ensuring the

holes for the set screws are facing down.

2. While holding handle firmly against door,

loosely tighten right Allen set screw (D)

with supplied Allen wrench until there is no

gap between handle and door.

3. Still holding the handle firmly to the door,

firmly tighten left Allen set screw (D) with

supplied Allen wrench.

4. Return to the right Allen set screw (D) and

firmly tighten with supplied Allen wrench.

C C



NOTE

Tighten all the screws so the screw is below

the surface of the handle. Tightly draw the

handles to the freezer and refrigerator doors

with no gaps. Open the opposite door while

tightening the Allen screw to make installa‐

tion easier.

The door handle may loosen over time or if it

was installed improperly. If this happens,

tighten the set screws on the handles.

DOOR HANDLE INSTALLATION

Before Installing The Water Supply

Line

WARNING!

To avoid electric shock, which can cause

death or severe personal injury, disconnect

the appliance from the electrical power be‐

fore connecting a water supply line to the ap‐

pliance.

CAUTION!

To avoid property damage:

• Use copper or stainless steel braided tub‐

ing for the water supply line. Do not use

water supply tubing made of 1/4" plastic.

Plastic tubing greatly increases the poten‐

tial for water leaks, and the manufacturer

will not be responsible for any damage if

you use plastic tubing for the supply line.

• Do not install water supply tubing in areas

where temperatures fall below freezing.

• Chemicals from a malfunctioning softener

can damage the ice maker. If the ice mak‐

er is connected to soft water, ensure that

the softener is maintained and working

properly.

IMPORTANT

Ensure your water supply line connections

comply with all local plumbing codes.

You will need

• Basic tools: adjustable wrench, flat-blade

screwdriver, and Phillips™ screwdriver.

• Access to a household cold water line with

water pressure between 30 and 100 psi.

• A water supply line made of 1/4" (6.4 mm)

OD, copper or stainless steel tubing. To

determine the length of tubing needed,

measure the distance from the ice maker

inlet valve at the back of the appliance to

your cold water pipe. Then add

approximately 6 ft (1.8 m) to ensure you

can move the appliance for cleaning.

• A shutoff valve to connect the water supply

line to your household water system. Do not

use a self-piercing type shutoff valve.

• Do not reuse compression fitting or use

thread seal tape.

• A compression nut and ferrule (sleeve) for

connecting a copper water supply line to the

ice maker inlet valve.



NOTE

Check with your local building authority for

recommendations on water lines and associ‐

ated materials prior to installing your new re‐

frigerator. Depending on your local/state

building codes, Frigidaire recommends:

• for homes with existing valves Smart

Choice® water line kit 5305513409 with a

6 ft (1.8 m) stainless steel water line.

• for homes without an existing valve Smart

Choice® water line kit 5305510264 with a

20 ft (6 m) copper water line with self-tap‐

ping saddle valve.

Please refer to Frigidaire.com for more infor‐

mation.

Installing the water supply line



NOTE

These instructions do not cover after market

ice maker installation. Instructions in after

market ice maker kit should be used.

IMPORTANT

Your appliance water supply system includes

several tubing lines, a water filter, and a wa‐

ter valve. To ensure that your water dispens‐

er works properly, this system must be com‐

pletely filled with water when your appliance

is first connected to the household water

supply line.

To connect water supply line to ice maker inlet

valve:

1. Disconnect refrigerator from electric power

source.

2. Place end of water supply line into sink or

bucket. Turn on water supply and flush

supply line until water is clear. Turn off

water supply at shutoff valve.

3. Remove plastic cap from water valve inlet

and discard cap.

WATER SUPPLY CONNECTION

4. Depending on the tubing you use:

• Copper tubing - Slide brass

compression nut, then ferrule (sleeve)

onto water supply line. Push water

supply line into water valve inlet as far

as it will go (1/4" / 6.4 mm). Slide ferrule

(sleeve) into valve inlet and finger

tighten compression nut onto valve.

Tighten another half turn with a wrench;

do not over tighten.

• Braided flexible stainless steel tubing -

The nut is already assembled on the

tubing. Slide nut onto valve inlet and

finger tighten nut onto valve. Tighten

another half turn with a wrench; do not

over tighten.

5. With steel clamp and screw, secure water

supply line to rear panel of the appliance.

6. Coil excess water supply line (copper

tubing only), about 2.5 turns, behind

refrigerator as shown and arrange coils so

they do not vibrate or wear against any

other surface. Do not kink tubing.

7. Turn on water supply at shutoff valve and

tighten any connections that leak.

8. Reconnect refrigerator to electrical power

source.

9. Turn the ice maker on.

Copper tubing installation

Braided flexible stainless steel tubing

installation

A. Steel clamp

B. Brass compression nut

C. Ferrule (sleeve)

D. Copper water line*

E. Water valve bracket

F. Valve inlet

G. Water valve

H. 6 ft (1.8 m) braided flexible stainless steel

water line from household water supply*

*Include enough tubing in the loop to allow

moving the refrigerator out for cleaning.

WATER SUPPLY CONNECTION

Control display

TEMP SETTINGS

FREEZER REFRIGERATOR

ALERTS

Clear

Alerts

Door Open

High Temp

Power Outage

Freeze

Boost

Temp

F-C

Default

Settings

Hold 3 Sec

Water

Dispenser

Hold 3 Sec

FILTER STATUS

Water

Filter

Air

Filters

Hold To Reset

Good

Order

Replace

Good

Order

Replace

Air Filters

Press and hold to reset after filter(s) has been replaced, status shown at right of

button will reset to Good.

Water Filter

Press and hold to reset after filter has been replaced, status shown at right of but‐

ton will reset to Good.

Water Dis‐

penser

When the water dispenser is on the LEDs above Water Dispenser illuminate.

Freeze Boost

Prior to grocery shopping, we recommend you activate Freeze Boost to lower the

temperature and freeze food faster. Freeze Boost will remain active for up to 24

hours before automatically deactivating or manually exiting by pressing Freeze

Boost to turn the function off. This will reset the freezer to the previous tempera‐

ture setting.

Clear Alerts

Resets any active and illuminated alarms:

Door Open, High Temp, Power Outage.

Temperature

adjustment

buttons

Press either the + or - to adjust to desired temperature setting.

Refrigerator

compartment

button

Select Refrigerator compartment to change temperature.

Select + / - buttons to set the temperature.

Refrigerator control range: +34°F (+1°C) to +44°F (+7°C).

Freezer com‐

partment but‐

ton

Select Freezer compartment to change temperature.

Select + / - buttons to set the temperature.

Freezer control range: -6°F (-21°C) to +6°F (-15°C).

Temp F-C Touch to toggle display from Fahrenheit to Celsius.

Default Set‐

ting

Press and hold for 3 seconds to reset to Factory settings.

Display modes

Your display is equipped with a sleep and lock

mode to prevent accidental changes to the unit

settings during opening and closing of the

doors. When both doors are closed, the display

will be in sleep mode. When either door is first

CONTROLS AND SETTINGS: INTERNAL WATER

DISPENSER

opened, the display will be in lock mode where

all the current settings are visible but dimmed.

Pressing any button on the display will awake

the display and a tone will be played. All

settings will then be fully lit. Touch the display

again to change any setting.

If there is no button pressed for 10 seconds

while any door is open, the display will default

back to lock mode.

Setting cooling temperatures



NOTE

The recommended settings for a product in‐

stalled in a kitchen is 37°F for the fresh food

compartment and 0°F for the freezer.

Press + or - to adjust the temperature to the

desired setting. The temperature setting begins

to blink with the first touch. The display times

out after 10 seconds and then returns to the

basic display.

Clear Alerts

Door Open

If you leave freezer or refrigerator doors open

for 5 minutes or more, the alarm sounds and

the Door Open indicator illuminates on the

control display. Press Clear Alert to reset the

alarm.

High Temp Alarm

High Temp illuminates next to Clear Alerts.

The alarm plays every 60 seconds. Press

Clear Alerts to acknowledge the alarm. The

highest temp value displays when you first

acknowledge the alarm.

Power Outage

In the event of a power outage, Power Outage

illuminates. Press Clear Alerts to acknowledge

the alarm. Other modes may be turned off until

you acknowledge the alarm. While Power

Outage displays on the control display, the unit

continues normal operation. High Temp may

also illuminate until you have reached a safe

operating range temperature.

Sabbath Mode



NOTE

While in Sabbath Mode, neither the lights,

dispenser, nor the control panel will work un‐

til Sabbath Mode is deactivated. Refrigerator

stays in Sabbath Mode after power failure re‐

covery. It must be deactivated with the but‐

tons on the control panel.



NOTE

Although you have entered the Sabbath

Mode, the ice maker will complete the cycle

it had already initiated. The ice cube com‐

partment will remain cold and new ice cubes

can be made with standard trays.

The Sabbath Mode is a feature that disables

portions of the refrigerator and its controls in

accordance with observance of the weekly

Sabbath and religious holidays within the

Orthodox Jewish community.

Turn Sabbath mode ON and OFF by

simultaneously pressing and holding both —

and Temp F-C for five seconds. The display

shows Sb while in Sabbath mode.

In the Sabbath Mode, the High Temp is active

for health reasons. For example, if you leave

the door ajar High Temp activates. The

refrigerator functions normally once you close

the door, without any violation of the Sabbath/

Holidays. The High Temp is permitted when

the cabinet temperature is outside the safe

zone for 20 minutes. The alarm silences itself

after 10 minutes while the High Temp stays lit

until you exit the Sabbath mode.

For further assistance, guidelines

for proper usage and a complete

list of models with the Sabbath

feature, visit the web at star-k.org.

CONTROLS AND SETTINGS: INTERNAL WATER

DISPENSER

Control display

Cold Drink

Timer

Reset

Water Filter

Ice

Maker

Reset

Air F ilters

Chill

Boost

Freeze

Boost

4 11

1520 161819 17

5 6 8 9 107

Lock button

Use the lock button to lock the display preventing it from being used in certain

situations. Press and hold for 3 seconds to enable/disable. While in the locked

state, you cannot make changes to settings on the display. Dispensing ice and

water is disabled. The indicator flashes and an audible warning tone plays.

Ice Maker

Press and hold for 3 seconds to turn ice maker on/off. When indicator is lit, ice

maker is on. When indicator is not lit, ice maker is in the Off state and will stop

making ice. While off, ice dispensing can continue as long as there is ice in the

bucket. When ice maker is off and ice is dispensing, indicator will blink.

Cold Drink

Timer

To quickly chill a drink inside the freezer compartment, touch Cold Drink Timer.

A time value will appear on the freezer temp display (in minutes) and can be

changed using the + / - buttons. A tone will sound when you have input the time.

Range is from 20 to 45 minutes in 5 minute intervals. Drinks freeze if the tem‐

perature setting is too low or timer setting is too long.

WARNING!

When using the cold drink timer, remove drinks from the freezer

compartment when the alarm sounds. Carbonated drinks may ex‐

plode if left in the freezer for too long.

Freeze Boost

Prior to grocery shopping, we recommend you activate Freeze Boost to lower

the temperature and freeze food faster. Freeze Boost will remain active for up to

24 hours before automatically deactivating or manually exiting by pressing

Freeze Boost to turn the function off. This will reset the freezer to the previous

temperature setting.

Freezer tem‐

perature ad‐

justment but‐

tons

Press either the + or - to adjust to desired temperature setting.

Control temperatures range from -6°F (-21°C) to +6°F (-15°C).

Door Open

This alert indicates the door has been open for 5 minutes or more. The Door

Open LED illuminates and the audible alert sounds until the door is closed. The

audible alert can be turned off by pressing the Door Open key or by closing the

door. If the door is open for 5 minutes, the interior light will turn off.

Power Outage

In the event of a power outage, the power outage alert will be illuminated once

power has been restored and a tone will sound. Press any button to silence the

tone.

Adjusting

Temp

Illuminates when temperatures are changed on the display and will remain illu‐

minated until the desired temperatures are reached inside the refrigerator and

freezer. Press either the + or - to adjust to desired temperature setting.

This unit is designed to operate at 37°F Refrigerator / 0°F Freezer. Unit should

stabilize temperatures within 24 hours of installation.

CONTROLS AND SETTINGS: EXTERNAL WATER

DISPENSER MODEL

°F/°C

To toggle between Fahrenheit (°F) and Celsius (°C), simultaneously press and

hold + and - for 5 seconds on refrigerator side of display.

Refrigerator

temperature

adjustment but‐

tons

Press either the + or - to adjust to desired temperature setting.

Control temperatures range from +34°F (+1°C) to +44°F (+7°C).

Chill Boost

Prior to grocery shopping, we activate Chill Boost to lower the temperature and

cool food faster. Chill Boost remains active for up to 6 hours before automatical‐

ly deactivating, or manually exit by pressing Chill Boost to turn the function off.

This resets the freezer to the previous temperature setting.

Reset Water

Filter

Press and hold button for three seconds to reset after filter change.

Reset Air Filter

Filter condition status is always displayed when the door is open. Press and

hold button for 3 seconds to reset after changing the filter.

Light Toggles dispenser light On and Off.

Replace Air Fil‐

ters

Display illuminates every 6 months or when filter needs replacing. Replace the

filter and then press and hold Reset Air Filters button for 3 seconds to deactivate

the warning on the display. Refer to Filter Replacement.

Crush

Press the Crush key to select crushed ice. An indicator light ill be illuminated

above the active feature.

Ice Maker Off

Press and hold for 3 seconds to turn ice maker on/off. When indicator is lit, ice

maker is on. When indicator is not lit, ice maker is in the Off state and will stop

making ice. While off, ice dispensing can continue as long as there is ice in the

bucket. When ice maker is off and ice is dispensing, indicator will blink.

Cube

Press the Cube key to select cubed ice. An indicator light will be illuminated

above the active feature.

Water

Press the Water key to select water. An indicator light will be illuminated above

the active feature.

Replace Water

Filter

Display illuminates every 6 months or after dispensing 120 gallons of water. Re‐

place the filter then press and hold Reset Water Filter button for 3 seconds to

deactivate the warning on display. Refer to Filter Replacement.

Display modes

• Sleep mode

As a default, the display goes to sleep after

a short time. If you press any icon, the

display awakens. After a short time, it goes

back to sleep. When in sleep mode, wake

up the appliance control display to confirm

the ice maker is on/off. You can turn sleep

mode off to have the display on full time

(awake mode). When sleep mode is off, the

display is always illuminated. To turn sleep

mode on/off, simultaneously press and hold

Crush and Light for 5 seconds. A tone

confirms.

• Awake Mode

To change from sleep mode to awake

mode, simultaneously press and hold Crush

and Light for 5 seconds. The display shows

the current temperature/ice maker status. A

tone confirms.

Setting cooling temperatures

(options may vary)



NOTE

The recommended settings for a product in‐

stalled in a kitchen is 37°F for the fresh food

compartment and 0°F for the freezer.

CONTROLS AND SETTINGS: EXTERNAL WATER

DISPENSER MODEL

IMPORTANT

If your product has food freezing in the fresh

food compartment, increase the temperature

setting 1 or 2°.

IMPORTANT

If you place food within 1" in front of the air

ports, there may be the chance of freezing

food.

Clear Alerts

Door Open

If you leave freezer or refrigerator doors open

for 5 minutes or more, the alarm sounds and

the door open indicator illuminates on the

display. Close the door or press any key on the

display to silence the alarm. The appliance

control display returns to normal operations

after you close the door.

High Temp Alarm

The alarm sounds in the event of a high

temperature condition. The appliance control

panel displays HI for whichever compartment

the alarm is detected in and the alarm sounds

every 10 seconds until acknowledged. Touch

any key or open a door to silence the alarm.

Power Outage

In the event of a power outage, a tone sounds

and the power outage alert illuminates once

power has been restored. Press any key on

the appliance control display to silence the

alarm.

Flapper (Dispenser models only)

If a jammed ice cube holds the flapper (or ice

chute door) open when you select Cube or

Crush, the alarm sounds and the current

selection blinks on the dispenser control. The

alarm resets when you remove the ice cube.

Sabbath Mode



NOTE

While in Sabbath Mode, neither the lights,

dispenser, nor the control panel will work un‐

til Sabbath Mode is deactivated. Refrigerator

stays in Sabbath Mode after power failure re‐

covery. It must be deactivated with the but‐

tons on the control panel.



NOTE

Although you have entered the Sabbath

Mode, the ice maker will complete the cycle

it had already initiated. The ice cube com‐

partment will remain cold and new ice cubes

can be made with standard trays.

The Sabbath Mode is a feature that disables

portions of the refrigerator and its controls in

accordance with observance of the weekly

Sabbath and religious holidays within the

Orthodox Jewish community.

Sabbath Mode is turned on and off by

simultaneously pressing and holding both the

FZ- and FF+ for 10 seconds. The display

shows Sb while in Sabbath mode.

In the Sabbath Mode, the High Temp alarm is

active for health reasons. For example, if the

door is left ajar the High Temp alarm is

activated. The refrigerator will function

normally once the door is closed, without any

violation of the Sabbath/Holidays. The High

Temp alarm is permitted when cabinet

temperature is outside the safe zone for 20

minutes. The alarm silences itself after 10

minutes while the High Temp icon stays lit until

the Sabbath mode is exited.

For further assistance, guidelines

for proper usage and a complete

list of models with the Sabbath

feature, visit the web at star-k.org.

CONTROLS AND SETTINGS: EXTERNAL WATER

DISPENSER MODEL



NOTE

Refrigerator Ice Maker (External Dispenser Models Only)

Priming the water supply system

Before making ice for the first time, prime the

water supply system. Air in new plumbing lines

can result in two or three empty ice maker

cycles. If the system is not flushed, the first ice

cubes may have discolored water or have an

odd flavor.

Purge air from the system:

1. Press and hold a drinking glass against the

water dispenser paddle until water comes

out (it may take up to 4 minutes to purge

air from the system).

2. Run approximately 1 full gallon of water

through the dispenser before use, and

discard.

uick

Freeze

Dispenser (varies by model)

CAUTION!

For proper dispenser operation, the recom‐

mended water supply pressure should fall

between 30 psi and 100 psi. Excessive pres‐

sure may cause the system to malfunction.



NOTE

The water dispenser has a built-in device

that shuts off the water flow after 3 minutes

of continuous use. To reset this shutoff de‐

vice, release the dispenser paddle.



NOTE

Dispensed water is not chilled. For colder

water, add ice to cup or container before dis‐

pensing water.

Ice maker Operation and Care

After you properly install the refrigerator and it

has cooled for several hours, the ice maker

can produce ice within 24 hours.

When using the ice maker for the first time,

and in order for it to work properly, you need to

clear air from the water tubing and the filter. If

you do not flush the system, the first ice cubes

may be discolored or have an odd flavor. Once

the ice maker begins making ice, allow the bin

to fill completely, and then discard the first full

bin of ice.

Storage bin capacity

In a standard depth model, the refrigerator ice

maker should produce 3 to 3.4 lbs of ice per 24

hours. In a counter depth model, the

refrigerator ice maker should produce 2.7 to

3.2 lbs of ice per 24 hours.

In a standard depth model, the refrigerator ice

bin holds around 5 lbs of ice. In a counter

depth model, the refrigerator ice bin holds

around 3.7 lbs of ice.

Turning the ice maker on/off

Ice production is controlled by the ice maker

On/Off feature on the appliance control display.

Press the On/Off feature to turn the ice maker

on and off.

IMPORTANT

Turning off the ice maker disables ice mak‐

ing. You will still be able to dispense existing

ice, and dispense water.



NOTE

The ice maker also has a built-in plastic sig‐

nal arm that automatically stops ice produc‐

tion when the ice bin is full. This signal arm

should not be used to manually stop the ice

maker.

AUTOMATIC ICE AND WATER DISPENSER

IMPORTANT

Your ice maker is turned on at the factory so

it can work as soon as you install your refrig‐

erator. If you cannot connect a water supply,

set the ice maker On/Off feature to Off; oth‐

erwise, the ice maker fill valve may make a

loud chattering noise when it attempts to op‐

erate without water.

IMPORTANT

On occasion, you may notice unusually small

ice cubes in the bucket or in dispensed ice.

This could occur in normal operation of the

ice maker. If you start seeing these more fre‐

quently, it may be an indication of low water

pressure or the water filter needs to be re‐

placed. As the water filter nears the end of its

useful life and becomes clogged with parti‐

cles, less water is delivered to the ice maker

during each cycle. If it has been 6 months or

longer since you last changed your water fil‐

ter, replace the water filter with a new one.

Poor quality household water may require

the filter to be changed more frequently.

Ice maker/Dispenser Tips

• Ice cubes stored too long may develop an

odd flavor. Empty the ice container as

explained in Cleaning the ice maker

section.

• If your refrigerator is not connected to a

water supply or the water supply is turned

off, turn off the ice maker.

• If you need a large quantity of ice at one

time, it is best to get cubes directly from the

ice container.

• The following sounds are normal when the

ice maker is operating:

– Motor running

– Ice dropping into ice container

– Water valve opening or closing

– Running water

• When dispensing cubed ice, it is normal to

have a small quantity of little pieces along

with the whole cubes.

• To avoid splashing, dispense ice into your

container before adding liquids.

• It is normal for ice to fill to the top of the ice

bin.

CAUTION!

Chemicals from a malfunctioning water soft‐

ener can damage the ice maker. If the water

supply to your refrigerator is softened, be

sure the softener is maintained to work prop‐

erly.

Cleaning the ice maker

Clean the ice maker and ice bin at regular

intervals, especially prior to vacation or

moving.

1. Turn off the ice maker.

2. Lift the ice bin upward, and then pull it

straight out to remove it.

3. Empty and carefully clean the ice bin with

mild detergent. Do not use harsh or

abrasive cleaners. Rinse with clean water.

4. Allow the ice bin to dry completely before

replacing it in the freezer.

5. Replace the ice bin.

6. Turn the ice maker on.



NOTE

When removing or replacing the ice bin,

avoid rotating the auger in the ice bin. If the

auger is accidentally rotated, you must re‐

align the auger by turning it in 45° turns until

the ice bin fits into place with the drive mech‐

anism. If you do not properly align the auger

when replacing the ice bin, the refrigerator

will not dispense ice. The refrigerator door al‐

so may not close properly causing warm air

to leak into the refrigerator compartment.

AUTOMATIC ICE AND WATER DISPENSER

When to remove and empty the ice bin

Remove and empty the ice bin if:

• An extended power failure (one hour or

longer) causes ice cubes in the ice bin to

melt and re-freeze together after power is

restored, jamming the dispenser

mechanism.

• You do not use the ice dispenser frequently.

Ice cubes will freeze together in the bin,

jamming the dispenser mechanism.

CAUTION!

Never use an ice pick or similar sharp instru‐

ment to break up the ice. This could damage

the ice bin and dispenser mechanism.

To loosen stuck ice, use warm water. Before

replacing the ice bin, make sure it is com‐

pletely dry.

AUTOMATIC ICE AND WATER DISPENSER

Your appliance is equipped with an internal

water dispenser mounted inside the cabinet,

on the left hand fresh food door.

Priming the Water Supply System

CAUTION!

For proper dispenser operation, the recom‐

mended water supply pressure should fall

between 30 psi and 100 psi. Excessive pres‐

sure may cause the system to malfunction.

Before dispensing water for the first time, be

sure to prime the water supply system. If you

do not flush the system, the first glasses of

water may have discolored water or have an

odd flavor.

1. Before dispensing, please ensure Water

Dispenser is enabled on the display (LEDs

above button are lit).

2. Begin filling the system by pressing and

holding a drinking glass against the water

dispenser paddle.

3. Keep the glass in this position until water

comes out of the dispenser. It may take

about 1.5 minutes.

4. Continue dispensing water for about 4

minutes to flush the system and plumbing

connections of any impurities (stop to

empty the glass if necessary).

Using the dispenser

Your appliance arrives with the water

dispenser already activated and ready to use.

To disable/enable the water dispenser, press

and hold Water Dispenser for 3 seconds. The

LEDs above Water Dispenser are not lit the

water dispensing function is disabled.

To dispense the water:

1. Ensure the dispenser is on.

2. Place a cup against the paddle and press

to dispense water.

CAUTION!

Hold the door with one hand while dispens‐

ing water to keep the door from moving and

possible dispensing water on floor.



NOTE

If you prefer to keep the internal water dis‐

penser disabled, use the appliance display to

disable it. The LEDs are not illuminated

above Water Dispenser.



NOTE

The water dispenser has a built-in device

that shuts off the water flow after 3 minutes

of continuous use. To reset this shutoff de‐

vice, simply release the dispenser paddle.

INTERNAL WATER DISPENSER



NOTE

Freezer Ice Maker (Internal Water Dispenser Models Only)

Ice maker operation and care

After you properly install the appliance, the ice

maker can produce ice within 24 hours. When

using the ice maker for the first time, and in

order for it to work properly, you need to clear

air from the water tubing and the filter. If you

do not flush the system, the first ice cubes may

be discolored or have an odd flavor. Once the

ice maker begins making ice, allow the bin to

fill completely, and then discard the first full bin

of ice.

Storage bin capacity

This ice maker should produce between 2 and

2.5 lbs of ice per 24 hours depending on use.

For a standard depth unit, the ice bin should

hold around 12 lbs of ice. For a counter depth

unit, the ice bin should hold around 9 lbs of ice.



NOTE

The ice maker will only produce the adver‐

tised production rate if you set the product to

0°F.



NOTE

The freezer ice maker fills from the back left-

hand corner of the bin. Moving the ice to the

edges of the bin allows the bin to fill com‐

pletely.

Turning the ice maker on/off

Press the power button to turn the ice maker

on (button will not illuminate).

Ice maker tips

The following sounds are normal when the ice

maker is operating:

• Motor running

• Ice dropping into ice bin

• Water valve opening or closing

• Running water

Ice cubes stored too long may develop an odd

flavor. Empty the ice bin as explained below.

CAUTION!

If the water supply to your refrigerator is soft‐

ened, properly maintain be sure the softener.

Chemicals from a water softener can dam‐

age the ice maker.

ICE MAKER

Shelves

CAUTION!

To avoid personal injury or property damage,

handle tempered glass shelves carefully.

Shelves may break suddenly if nicked,

scratched, or exposed to sudden tempera‐

ture change. Allow the glass shelves to stabi‐

lize to room temperature before cleaning. Do

not wash in dishwasher.

You can easily adjust shelf positions in the

refrigerator compartments to suit your needs.

The shelves have mounting brackets that

attach to slotted supports at the rear of each

compartment.

1. Remove all the food from the shelf.

2. Lift the front edge up and pull the shelf out.

3. Replace by inserting the mounting bracket

hooks into the desired support slots.

4. Lower the shelf and lock into position.

Slide-Under Shelf

To adjust the slide-under shelf, push the front

half of the shelf backward toward the rear of

the cabinet until the rear half shelf drops down.

Then, gently continue pushing the front half

shelf back so it slides under the rear half shelf.

Reposition the air seal

IMPORTANT

Be aware of the air seal located at the rear of

the shelf. Shelves located on the left side

should have the air seal mounted on the far

left side. Shelves located on the right side

should have the air seal mounted on the far

right side. This is to ensure there is no inter‐

ference with the large air tower on the back

wall of the cabinet. This also applies to the

crisper shelves.

For glass shelves:

1. Remove air seal by pushing seal straight

back.

2. Position the air seal towards the outside

edge of the shelf to avoid the air tower

when shelf is pushed back into place.

3. Install seal by sliding the open channel end

of the seal onto back edge of shelf until

seal sits snug on back of shelf and flap sits

at about a 10° angle from shelf surface.

Accessories

(some models)

ReadyCook™ Marinade and Oven Pan

Easily prepare, store, and cook delicious meals

with our Frigidaire ReadyCook™ Marinade and

Oven Pan. This all-in-one pan safely stores

food in the fridge with its stainless steel base,

translucent lid, and silicone seal. It is also

oven-safe up to 450°F (232°C) when used

without the lid and is dishwasher safe.

ReadyStore™ Wine and Beverage Rack

Store your favorite wines or beverages with our

ReadyStore™ Wine and Beverage Rack. This

STORAGE FEATURES

space saving rack helps keep your fridge neat

and organized and allows for easy access to

beverages without a hassle. It can be used to

store wine bottles, drink cans, 20 oz drink

bottles, or a combination of all three.

Drawers

This appliance includes a variety of storage

drawers.

Crispers

Crispers are designed for storing fruits,

vegetables, and other fresh produce.

Auto-Humidity Control

Crispers have an auto-humidity control on the

back of each crisper under the humidity control

cover.



NOTE

We do not recommend replacing the auto-

humidity membrane unless it becomes dam‐

aged or ruined. If the membrane becomes

soiled, it can be washed with soap and wa‐

ter. Ensure the membrane is dry before re‐

placing it in the cover and back in the appli‐

ance.

To remove the auto-humidity control

membrane:

1. Remove any shelves placed above the

crisper cover, and then lift up and remove

the crisper cover from the unit.

2. Remove 3 screws on the bottom of the

crisper cover to release the auto-humidity

cover.

3. Slide out the auto-humidity cover from the

crisper cover to gain access to the humidity

membrane.

4. Clean the membrane with hot soapy water.

5. Replace the membrane and cover by

reversing the steps above.

Adjustable Temp Drawer

Ideal for storage of deli meats, cheese, and

beverages.

2 3 4

Lock

Control

The drawer automatically locks

to prevent any unwanted use.

To change the setting, press

and hold Lock for 3 seconds to

unlock it. It will automatically

lock after 10 seconds without

any interaction.

Meat/

Seafood

Setting

Select Meat/Seafood for short

term storage. Freeze any meat

to be kept longer than 2 days.

A tone sounds to confirm

choice.

Cold

Drinks

Setting

Select Cold Drinks when stor‐

ing individually packaged bev‐

erages such as soda cans or

juice boxes. A tone sounds to

confirm choice.

Deli/

Snacks

Setting

Select Deli/Snacks when stor‐

ing meat and cheeses. A tone

sounds to confirm choice.

IMPORTANT

Do not use the Adjustable Temp Drawer to

store fresh produce as these items may

freeze and cause damage to the fruits and

leafy vegetables stored in the drawer.

STORAGE FEATURES

Removing/Installing crisper

drawers with PureAir Produce

Keeper™

You can remove the drawer for cleaning. To

remove the drawer:

1. Pull the drawer out until it stops.

2. Lift the front slightly and remove the

drawer.

CAUTION!

Remove the produce keeper prior to washing

the crisper.

To install the drawer:

1. Place the crisper on top of the deli cover

and tilt upward slightly.



NOTE

The gasket should be on the outside wall of

the crisper after being removed and reinstal‐

led into the unit.

2. Push the crisper straight once the bottom

rollers clear the front deli crisper support

rollers.

Doors

Storage bins (varies by model)

The doors to your refrigerator compartment

use a system of modular storage bins. All of

these bins are removable for easy cleaning.

Some of them have fixed positions, while

others can be adjusted to your needs.

Door bins are ideal for storing jars, bottles,

cans, and large drink containers. They also

enable quick selection of frequently used

items.

Changing position of adjustable

door bin

To change the position of an adjustable door

bin:

1. Remove all food from door bin.

2. Grip the bin firmly with both hands and lift it

upward.

3. Remove the bin.

4. Place the bin just above desired position.

5. Lower the bin onto supports until it is

locked in place.

6. Place the bin liner into the bin.

Freezer accessories

Your freezer has baskets and dividers you can

adjust to your needs.

STORAGE FEATURES

Removing/Installing freezer

baskets

To remove the upper freezer basket:

1. Fully open the freezer drawer.

2. Extend the upper freezer drawer all the

way out from the cabinet.

3. Slightly push inward on the basket tabs to

release the upper basket from the slide

assemblies (1 per side, in front).

Quick

eze

4. Lift the basket up and out of the freezer

compartment.

Reverse the steps to install the upper freezer

basket.

To remove the lower freezer basket:

1. Completely open the freezer compartment.

2. Locate the basket clips in the rear corners

of the basket, and then pull them out to

remove them.

3. Lift the basket up and remove it.

Reverse the steps to install the lower freezer

basket. Push the basket clips in the rear

corners of the basket.

Lower basket divider

To reposition the lower basket divider, grab the

lower divider and slightly pull it up to slide the

divider to the next position.

You cannot remove the divider.

STORAGE FEATURES

Ideas for storing food

Fresh food storage

• Keep the fresh food compartment between

34°F and 40°F, with an optimum

temperature of 37°F.

• Avoid overcrowding the refrigerator shelves,

which reduces air circulation and causes

uneven cooling.

• Avoid placing food in front of air ports.

Fruits and vegetables

• Store fruits and vegetables in crisper

drawers, where trapped moisture helps

preserve food quality for longer time

periods.

• Wash items and remove excess water.

• Wrap any items that have strong odors or

high moisture content.

Meat

• Wrap raw meat and poultry separately and

securely to prevent leaks and contamination

of other foods or surfaces.

• Use the deli drawer to store meat/poultry for

short-term storage. Any meat to be kept

longer than two days should be frozen.

Frozen foods storage

• Keep the freezer compartment at 0°F or

lower.

• A freezer operates most efficiently when it

is at least 2/3 full.

Packaging foods for freezing

• To minimize food dehydration and quality

deterioration, use aluminum foil, freezer

wrap, freezer bags, or airtight containers.

Force as much air out of the packages as

possible and seal them tightly. Trapped air

can cause food to dry out, change color,

and develop an off-flavor (freezer burn).

• Wrap fresh meats and poultry with suitable

freezer wrap prior to freezing.

• Do not refreeze meat that has completely

thawed.

Loading the freezer

• Prior to grocery shopping, activate Freeze

Boost so that on your return you can ensure

your newly purchased food designated for

the freezer will be preserved as quickly as

possible.

• Activating Freeze Boost also will help your

freezer more efficiently maintain the

selected temperature after placing new

purchases with pre-existing frozen foods.

• Avoid adding too much warm food to the

freezer at one time. This overloads the

freezer, slows the rate of freezing, and can

raise the temperature of frozen foods.

• Leave a space between packages, so cold

air can circulate freely, allowing food to

freeze as quickly as possible.

Ideas for energy saving

Installation

• Locate the refrigerator in the coolest part of

the room, out of direct sunlight, and away

from heating ducts or registers.

• Do not place the refrigerator next to heat-

producing appliances such as a range,

oven, or dishwasher. If this is not possible,

a section of cabinetry or an added layer of

insulation between the two appliances will

help the refrigerator operate more

efficiently.

• Level the refrigerator so that the doors

close tightly.

Temperature setting

• Refer to Controls and Settings for

procedures on temperature settings.

Food storage

• Avoid overcrowding the refrigerator or

blocking cold air vents. Doing so causes the

refrigerator to run longer and use more

energy.

• Cover foods and wipe containers dry before

placing them in the refrigerator. This cuts

down on moisture build-up inside the unit.

• Organize the refrigerator to reduce door

openings. Remove as many items as

needed at one time and close the door as

soon as possible.

• Do not place a hot container directly on a

cold shelf. Remember, such an extreme

temperature change may damage the

glass.

STORING FOOD AND SAVING ENERGY

Understanding the sounds you

may hear

Your new, high-efficiency appliance may

introduce unfamiliar sounds. These sounds

normally indicate your appliance is operating

correctly. Some surfaces on floors, walls, and

kitchen cabinets may make these sounds more

noticeable.



NOTE

Energy efficient foam in your appliance is not

a sound insulator.

Following is a list of major components in your

appliance and the sounds they can cause:

A. Evaporator. Refrigerant through the

evaporator may create a boiling or gurgling

sound.

B. Evaporator fan. You may hear air being

forced through the refrigerator by the

evaporator fan.

C. Defrost heater. During defrost cycles,

water dripping onto the defrost heater may

cause a hissing or sizzling sound. After

defrosting, a popping sound may occur.

D. Automatic Ice maker. When ice has been

produced, you will hear ice cubes falling

into the ice bin.

E. Electronic control & automatic defrost

control. These parts can produce snapping

or clicking sound when turning the cooling

system on and off.

F. Condenser fan. You may hear air being

forced through the condenser.

G. Compressor. Modern, high-efficiency

compressors run much faster than

previous models. The compressor may

have a noticeable hum or pulsating sound

during operation.

H. Water valve. Makes a buzzing sound each

time it opens to fill the ice maker.

I. Drain pan (not removable). You may hear

water dripping into the drain pan during the

defrost cycle.

J. Condenser. May create minimal sounds

from forced air.

K. Motorized damper. May produce

intermittent humming during operation.

L. Ice chute. When dispensing ice, you will

hear a snapping or clicking sound when

the solenoid opens and closes the ice

chute.



NOTE

During automatic defrost cycle, a red glow in

the back wall vents of your freezer compart‐

ment is normal.

NORMAL OPERATING SOUNDS

PurePour™ Water Filter

Keep safe, great-tasting water flowing with a

PurePour™ water filter. Using a PurePour™

water filter:

• Makes safe water second nature

PurePour™ water filters are certified to

reduce contaminates* and keep great-

tasting water flowing for you and your

family.

• Produces purity you can trust

Know for certain your PurePour™ water

filter is a protector. Counterfeits and

knockoffs put your refrigerator and health at

risk. Frigidaire Genuine Filters are the

smarter, safer choice.

• Every drop gives back

Partnered on sustainability efforts the use of

a PurePour™ water filter helps cut back on

the cost and use of plastic used to produce

and package bottled water

*For the complete list, please see Performance

Data Sheet on Frigidaire.com.

Ordering replacement filters



NOTE

When you order your replacement filter,

please reorder the same filter type currently

in your refrigerator.

To order your replacement filters, please call

toll-free at 1-800-374-4432, or visit

Frigidaire.com. Frigidaire recommends that

you order extra filters when you first install your

appliance, and that you replace your filters at

least once every 6 months.

Here are the product numbers to request when

ordering:

PurePour™ Water Filter PWF-1™ FPPWFUO1

Find the Performance Data Sheet located in

the Guides and Manuals section for your

specific water filter on Frigidaire.

More about your advanced water

filter

The PurePour™ ice and water filter system is

tested and certified by IAPMO R&T against

Standards 42, 53, 401 and NSF/ANSI/CAN

372CSA B483.1 in PurePour™ PWF-1 for the

reduction of claims specified on the

Performance Data Sheet.

Visit Frigidaire.com for more information.

Do not use with water that is microbiologically

unsafe or of unknown quality without adequate

disinfection before or after the system. Use

systems certified for cyst reduction on

disinfected waters that may contain filterable

cysts.

Test & certification results

• Rated Capacity - 125 gal / 453 L for

PurePour™ and ice and water filter

• Rated service flow - .50 gal/min

• Operating Temperature: Minimum: 33°F,

Maximum: 100°F

• Maximum rated pressure - 100 lbs/in²

• Recommended minimum operating

pressure: 30 lbs/in²

Replacing your PurePour™ water

filter

The water filter is located at the bottom left of

the refrigerator compartment next to the Deli or

Adjustable Temp Drawer.

In general, you should change the water filter

every 6 months to ensure the highest possible

water quality. Water Filter Status on the user

interface prompts you to replace the filter after

a standard amount of water (125 gal / 453 L for

PurePour™) has flowed through the system.

If you have not used your appliance for a

period of time (during moving for example),

change the filter before reinstalling the

appliance.

FILTER REPLACEMENT

It is not necessary to turn the water supply off

to change the filter. Be ready to wipe up any

small amounts of water released during the

filter replacement.

1. Turn off the ice maker.

2. Remove the filter by pushing on the end/

face of the filter.

3. Slide the old water filter cartridge straight

out of the housing and discard it.

4. Unpack the new filter cartridge. Using the

alignment guide, slide it gently into the filter

housing until it stops against the snap-in

connector at the back of the housing.

5. Push firmly until the cartridge snaps into

place (you should hear a click as the

cartridge engages the snap-in connector).

6. Press a drinking glass against the water

dispenser while checking for any leaks at

the filter housing. Any spurts and sputters

that occur as the system purges air out of

the dispenser system are normal.

7. After filling one glass of water, continue

flushing the system for about 4 minutes.

8. Turn on the ice maker.

9. Press and hold the Water Filter reset

button on the Ice and Water Dispenser

control panel for 3 seconds. When the

display changes from red to green, the

status has been reset.

PureAir™ RAF-2 Air Filter

The air filter is located at the top of the air

tower.

To order replacement filters, please visit our

online store at Frigidaire.com or call toll-free at

1-800-374-4432. Here are the product

numbers to request when ordering:

PureAir™ RAF-2 replacement cartridge

FRGPAAF2



NOTE

We recommend you always use genuine

Frigidaire replacement filters only.

Replacing your PureAir™

To ensure optimal filtering of refrigerator odors,

you should change the air filter every 6

months. The filter status light on the main

controls prompts you to replace the filter after 6

months.

To remove and replace the air filter:

1. Place fingers on top of air cover and gently

pull towards front of unit releasing the top

snaps on the cover from the air tower.

2. Lift bottom snaps up and out of air tower

assembly to disengage and remove front

cover.

3. Replace air filter by snapping filter into

snaps on air filter cover.

4. Installation of front cover is reverse of

removal.

5. To reset Air Filter status, refer to Controls

and Settings.

PureAir Produce Keeper™



NOTE

PureAir Produce Keeper™ accessories are

optional and may be installed in most models

at any time. Visit Frigidaire.com for informa‐

tion about PureAir Produce Keeper™ PK-1

accessories.

Part # FRPAPKRF.

Keep fruits and vegetables fresher longer with

PureAir Produce Keeper™. Our produce

keeper absorbs ethylene gas, the natural gas

that causes produce to ripen quicker. Reduce

food waste, save money and enjoy fresh-

tasting produce with a longer storage life.

Ordering Replacement Filters

To order your replacement filters, please visit

our online store at Frigidaire.com, by calling

toll-free at 1-800-374-4432, or by visiting the

dealer where you purchased your refrigerator.

FILTER REPLACEMENT

Frigidaire recommends that you replace your

filters at least once every 6 months.

Here are the product numbers to request when

ordering:

PureAir Produce Keeper™ PK-1 Part

#FRPAPKRF .

Installing the PureAir Produce

Keeper™

CAUTION!

• Do not open:

Contents may irritate eyes or skin. Keep

out of reach of children.

• First aid:

Contains potassium permanganate. In

case of contact with eyes or skin, rinse

immediately with water.

• Do not eat:

If swallowed, seek medical treatment im‐

mediately.

1. Remove the plastic wrapper. Insert

unopened packet into the holder in the

crisper drawer.

2. For optimal results, replace the refill every

6 months along with your air filter.

FILTER REPLACEMENT

Protecting your investment

Keeping your appliance clean maintains its

appearance and prevents odor build-up. Wipe

up any spills immediately and clean the freezer

and fresh food compartments at least twice a

year. When cleaning, take the following

precautions:

• Never use metallic scouring pads, brushes,

abrasive cleaners, or strong alkaline

solutions on any surface.

• Never use chloride or cleaners with bleach

to clean stainless steel.

• Do not wash any removable parts in a

dishwasher.

• Always unplug the electrical power cord

from the wall outlet before cleaning.

• Do not remove the serial plate. Removal of

your serial plate voids your warranty.

• Remove adhesive labels by hand. Do not

use razor blades or other sharp instruments

which can scratch the appliance surface.

• Before moving your appliance, raise the

anti-tip brackets so the rollers will work

correctly. This will prevent the floor from

being damaged.

Do not use abrasive cleaners such as window

sprays, scouring cleansers, brushes,

flammable fluids, cleaning waxes,

concentrated detergents, bleaches or

cleansers containing petroleum products on

plastic parts, interior doors, gaskets or cabinet

liners. Do not use paper towels, metallic

scouring pads, or other abrasive cleaning

materials or strong alkaline solutions.

Refer to the guide below for more details on

caring and cleaning specific areas of your

appliance.



NOTE

If you set your temperature controls to turn

off cooling, power to lights and other electri‐

cal components will continue until you unplug

the power cord from the wall outlet.

CAUTION!

Pull the appliance straight out to move it.

Shifting it from side to side may damage

flooring.

Be careful not to move the appliance beyond

the plumbing connections.

CAUTION!

Damp objects stick to cold metal surfaces.

Do not touch refrigerated surfaces with wet

or damp hands.

IMPORTANT

If you store or move your appliance in freez‐

ing temperatures, be sure to completely

drain the water supply system. Failure to do

so could result in water leaks when the appli‐

ance is put back into service. Contact a serv‐

ice representative to perform this operation.

Vacation and moving tips

Occasion Tips

Short vacations

• Leave the appliance operating during vacations

of three weeks or less.

• Use all perishable items from the appliance com‐

partment.

• Turn automatic ice maker off and empty ice

bucket, even if you will only be gone a few days.

CARE AND CLEANING

Occasion Tips

Long vacations

• Remove all food and ice if you will be gone one

month or more.

• Turn the cooling system off (refer to Controls

and Settings for location of On/Off button) and

disconnect power cord.

• Turn water supply valve to closed position.

• Clean interior thoroughly.

• Leave both doors open to prevent odors and

mold build-up. Block doors open if necessary.

Moving

• Unplug the appliance

• Remove all food and ice.

• Recommend use of a handcart, load from the

side.

• Adjust rollers all the way up to protect them dur‐

ing sliding or moving.

• Pad cabinet to avoid scratching surface.

Care & Cleaning Tips

Part What to use Tips and precautions

Interior and door liners

• Soap and water

• Baking soda and water

Use 2 tablespoons of baking soda in 1 quart of

warm water. Be sure to wring excess water out of

sponge or cloth before cleaning around controls,

light bulb or any electrical part.

Door gaskets Soap and water Wipe gaskets with a clean soft cloth.

Drawers and bins Soap and water Use a soft cloth to clean drawer runners and

tracks.

Glass shelves

• Soap and water

• Glass cleaner

• Mild liquid sprays

Allow glass to warm to room temperature before

immersing in warm water.

Exterior and handles

• Soap and water

• Non abrasive glass

cleaner

Do not use commercial household cleaners con‐

taining ammonia, bleach or alcohol to clean han‐

dles. Use a soft cloth to clean smooth handles.

Do not use a dry cloth to clean smooth doors.

CARE AND CLEANING

Part What to use Tips and precautions

Exterior and handles

(Stainless steel models

only)

• Soap and water

• Stainless steel cleaners

Never use chloride or cleaners with bleach to

clean stainless steel.

Clean stainless steel front and handles with non-

abrasive soapy water and a dishcloth. Rinse with

clean water and a soft cloth. Use a non-abrasive

stainless steel cleaner. These cleaners can be

purchased at most home improvement or major

department stores. Always follow manufacturer’s

instructions. Do not use household cleaners con‐

taining ammonia or bleach.

Always clean, wipe and dry with the grain to pre‐

vent scratching. Wash the rest of the cabinet with

warm water and mild liquid detergent. Rinse well,

and wipe dry with a clean soft cloth.

CARE AND CLEANING

Let us help you troubleshoot your concern! This section will help you with common issues. If you

need us, visit our website, chat with an agent, or call us. We may be able to help you avoid a

service visit. If you do need service, we can get that started for you!

Visit Frigidaire.com or call toll-free 1-800-374-4432.

Automatic Ice Maker

Concern Potential Cause Common solution

Ice maker is not making any ice. Ice maker is turned off. Turn on ice maker. For the refrig‐

erator ice maker, press and hold

the Ice Maker On/Off button on

your display. For the freezer ice

maker, turn the ice maker on by

pressing the toggle switch on the

(-) side.

Refrigerator is not connected to

water line or water valve is not

open.

Connect the unit to the household

water supply and ensure the wa‐

ter valve is open.

The water supply line is kinked. Ensure that the supply line does

not kink when the refrigerator is

pushed into place against the

wall.

The water filter is not seated

properly.

Remove and re-install the water

filter. Be sure to seat it fully into

the locked position.

The water filter may be clogged

with foreign material.

If water dispenses slowly or not at

all, or if the filter is 6 months old

or older, it should be replaced.

TROUBLESHOOTING

Concern Potential Cause Common solution

Ice maker is not making enough

ice.

Ice maker is producing less ice

than you expect.

• In a standard depth model,

the refrigerator ice maker

should produce 3.0 to 3.4 lbs

of ice per 24 hours and will

hold around 5 lbs of ice.

• In a counter depth model, the

refrigerator ice maker should

produce 2.7 to 3.2 lbs of ice

per 24 hours and will hold

around 3.7 lbs of ice.

The water filter may be clogged

with foreign material.

If water dispenses slower than

normal, or if the filter is six

months old or older, it should be

replaced.

Saddle valve on cold water pipe is

clogged or restricted by foreign

material.

Ensure that the supply line does

not kink when the refrigerator is

pushed into place against the

wall.

Heavy traffic, opening or closing

of the doors excessively.

Turn off household water line

valve. Remove valve. Clean

valve. Replace valve if necessary.

Freezer control is set too warm

(freezer ice maker).

Set freezer control to colder set‐

ting to improve performance of

the ice maker (freezer ice maker).

Allow 24 hours for temperature to

stabilize.

Water pressure is extremely low.

Cut-off and cut-on pressures are

too low (well systems only).

Have someone turn up the cut-off

and cut-on pressure on the water

pump system (well systems only).

Reverse osmosis system is in re‐

generative phase.

It is normal for a reverse osmosis

system to be below 20 psi during

the regenerative phase.

Freezer ice maker will not stop

making ice (some models).

Ice maker bail arm is being held

down by a package in the freezer

that has fallen against ice maker.

Move any item or frozen ice

cubes that may block the bail arm

from being in the off or upward

position.

Ice cubes are located in once

spot inside the freezer ice bin.

Periodically move ice cubes

around the ice bin so that ice

maker will continue to make ice.

TROUBLESHOOTING

Concern Potential Cause Common solution

Ice cubes are freezing together. Ice cubes are not being used fre‐

quently enough or interruption of

power for prolonged time.

Remove ice container and discard

ice. The ice maker will produce

fresh supply. Ice should be used

at least twice weekly to keep the

cubes separated.

Ice cubes are hollow (shells of ice

with water inside). The hollow

cubes break open in the bin and

leak their water onto existing ice,

which causes it to freeze togeth‐

er.

• This generally occurs when

the ice maker does not get

enough water. This is usually

the result of a clogged water

filter or restricted water sup‐

ply.

• Replace the water filter and if

the condition still occurs check

for a clogged saddle valve,

water valve not turned on all

the way or kinked water sup‐

ply line.

Ice and water dispenser

Concern Potential cause Common solution

Dispenser does not dispense ice. There is no ice in the bin to be

dispensed.

See the section above: Ice maker

is not making any ice.

The refrigerator doors are not

completely closed.

Completely close the refrigerator

doors.

Dispenser paddle has been

pressed too long and the dispens‐

er motor has overheated.

The motor overload protector will

reset in about 3 minutes, and then

ice can be dispensed.

Not dispensing ice regularly may

melt and re-freeze ice causing ice

clumping. Dispensing clumps

could damage the ice bucket.

Empty the ice bucket monthly or

regularly dispense ice. For longer

periods of time (vacation or va‐

cant homes) turn off the ice mak‐

er. See tips in Automatic Ice and

Water Dispenser.

Ice dispenser is jammed. Ice has melted and frozen around

auger due to infrequent use, tem‐

perature fluctuations, and/or pow‐

er outages.

Remove ice container, thaw, and

empty the contents. Clean con‐

tainer, wipe dry, and replace in

proper position. When new ice is

made, dispenser should operate.

See tips on cleaning in Automatic

Ice and Water Dispenser.

Ice cubes are jammed between

ice maker and back of ice con‐

tainer.

Remove ice cubes that are jam‐

ming the dispenser.

TROUBLESHOOTING

Concern Potential cause Common solution

Dispenser does not dispense wa‐

ter.

Water filter not seated properly. Remove and reinstall the water fil‐

ter. For PurePour™, be sure to

push the filter in all the way until it

clicks into place and is secured

inside of the water filter housing.

Water filter is clogged. Replace filter cartridge. Be sure to

push filter all the way in until it

clicks into place and is secured

inside of the water filter housing.

Household water line valve is not

open.

Open household water line valve.

Water not cold enough. The water dispensing system is

not designed to chill water.

Add ice to cup or container before

dispensing water.

Water has an odd taste and/or

odor.

Water has not been dispensed for

an extended period of time.

Draw and discard 10-12 glasses

of water to freshen the supply.

The appliance not properly con‐

nected to cold water line.

Connect unit to cold water line

that supplies water to the kitchen

faucet.

Opening/Closing of Doors/Drawers

Concern Potential cause Common solution

Door(s) does not close. Door was closed too hard, caus‐

ing other door to open slightly.

Close both doors gently.

Refrigerator is not level. It rocks

on the floor when moved slightly.

Ensure floor is level and solid,

and can adequately support the

refrigerator. Contact a carpenter

to correct a sagging or sloping

floor.

Refrigerator is touching a wall or

cabinet.

Ensure floor is level and solid,

and can adequately support the

refrigerator. Contact a carpenter

to correct a sagging or sloping

floor.

Drawers are difficult to move. Food is touching shelf on top of

drawer.

Remove top layer of items in

drawer.

Track that drawers slide on is

dirty.

• Ensure drawer is properly in‐

stalled on track.

• Clean drawer, rollers, and

track. Refer to Care and

Cleaning.

TROUBLESHOOTING

Running of appliance

Concern Potential cause Common solution

Compressor does not run. Freezer control is set to off. Set freezer control.

Refrigerator is in defrost cycle. This is normal for a fully automat‐

ic defrost refrigerator. The defrost

cycle occurs periodically, lasting

about 30 minutes.

Plug at electrical outlet is discon‐

nected.

Ensure plug is tightly pushed into

outlet.

House fuse blown or tripped cir‐

cuit breaker.

Check/replace fuse with a 15 amp

time-delay fuse.

Reset circuit breaker.

Power outage. Check house lights. Call local

electric company.

Refrigerator seems to run too

much or too long.

Your variable speed compressor

is designed to run 100% of the

time except during the defrost cy‐

cle. At times it will run faster, such

as after a defrost cycle.

It is normal for the compressor to

run continuously except during

defrost mode.

Appliance seems to run continu‐

ously.

The appliances are designed with

a variable speed compressor to

be more energy efficient than pre‐

vious models. This means your

compressor reacts quickly to tem‐

perature fluctuations and circu‐

lates cold air based off your use

and room temperature.

This is normal for a variable

speed compressor refrigerator;

however, if you have concerns,

call toll-free 1-800-374-4432 or

visit Frigidaire.com.

Digital temperature display

Concern Potential cause Common solution

Digital temperature displays an

error.

Electronic control system has de‐

tected a performance problem.

Call your Frigidaire service repre‐

sentative, who can interpret any

messages or number codes flash‐

ing on the digital displays.

Water/Moisture/Frost Inside Refrigerator

Concern Potential cause Common solution

Moisture collects on inside of re‐

frigerator walls.

Weather is hot and humid. The rate of frost buildup and inter‐

nal sweating increases.

Flipper mullion Adjust flipper mullion. Refer to

Flipper Mullion in Installation.

Door is slightly open. See the Opening/Closing of

Doors/Drawers section above.

TROUBLESHOOTING

Concern Potential cause Common solution

Water collects on bottom side of

drawer cover.

Vegetables contain and give off

moisture.

• It is not unusual to have mois‐

ture on the bottom side of the

cover.

• Move humidity control (some

models) to lower setting.

Water collects in bottom of draw‐

er.

Washed vegetables and fruit

drain while in the drawer.

Water collecting in bottom of

drawer is normal. Dry items be‐

fore putting them in the drawer or

store produce in tightly sealed

bags to help reduce condensation

inside of the drawer.

Water/Moisture/Frost Outside Refrigerator

Concern Potential cause Common solution

Moisture collects on outside of re‐

frigerator or between doors.

Weather is humid. This is normal in humid weather.

When humidity is lower, the mois‐

ture should disappear.

Door is slightly open, causing cold

air from inside refrigerator to meet

warm air from outside.

See the Opening/Closing of

Doors/Drawers section above.

Food in Fresh food comartment

Concern Potential cause Common solution

Food is freezing. Temperature setting is too low. Move the setting to a higher de‐

gree.

Temperature sensor is covered

by food (right side of fresh food

area).

Allow space for air flow to the

sensor.

Food is covering the air ports. Allow space between the air ports

and the food.

TROUBLESHOOTING

Your appliance is covered by a one year

limited warranty. For one year from your date

of delivery, Electrolux will pay all costs for

repairing or replacing any parts of this

appliance that prove to be defective in

materials or workmanship when such

appliance is installed, used and maintained in

accordance with the provided instructions.

Exclusions

This warranty does not cover the following:

Products with original serial numbers that

have been removed, altered or cannot be

readily determined.

2. Product that has been transferred from its

original owner to another party or removed

outside the USA or Canada.

3. Rust on the interior or exterior of the unit.

4. Products purchased “as-is” are not covered

by this warranty.

5. Food loss due to any refrigerator or freezer

failures.

6. Products used in a commercial setting.

7. Service calls which do not involve

malfunction or defects in materials or

workmanship, or for appliances not in

ordinary household use or used other than

in accordance with the provided

instructions.

8. Service calls to correct the installation of

your appliance or to instruct you how to

use your appliance.

9. Expenses for making the appliance

accessible for servicing, such as removal

of trim, cupboards, shelves, etc., which are

not a part of the appliance when it is

shipped from the factory.

10. Service calls to repair or replace appliance

light bulbs, air filters, water filters, other

consumables, or knobs, handles, or other

cosmetic parts.

11. Surcharges including, but not limited to,

any after hour, weekend, or holiday service

calls, tolls, ferry trip charges, or mileage

expense for service calls to remote areas,

including the state of Alaska.

12. Damages to the finish of appliance or

home incurred during transportation or

installation, including but not limited to

floors, cabinets, walls, etc.

13. Damages caused by: services performed

by unauthorized service companies; use of

parts other than genuine Electrolux parts or

parts obtained from persons other than

authorized service companies; or external

causes such as abuse, misuse, inadequate

power supply, accidents, fires, or acts of

God.

DISCLAIMER OF IMPLIED WARRANTIES;

LIMITATION OF REMEDIES

CUSTOMER’S SOLE AND EXCLUSIVE

REMEDY UNDER THIS LIMITED WARRANTY

SHALL BE PRODUCT REPAIR OR

REPLACEMENT AS PROVIDED HEREIN.

CLAIMS BASED ON IMPLIED WARRANTIES,

INCLUDING WARRANTIES OF

MERCHANTABILITY OR FITNESS FOR A

PARTICULAR PURPOSE, ARE LIMITED TO

ONE YEAR OR THE SHORTEST PERIOD

ALLOWED BY LAW, BUT NOT LESS THAN

ONE YEAR. ELECTROLUX SHALL NOT BE

LIABLE FOR CONSEQUENTIAL OR

INCIDENTAL DAMAGES SUCH AS

PROPERTY DAMAGE AND INCIDENTAL

EXPENSES RESULTING FROM ANY

BREACH OF THIS WRITTEN LIMITED

WARRANTY OR ANY IMPLIED WARRANTY.

SOME STATES AND PROVINCES DO NOT

ALLOW THE EXCLUSION OR LIMITATION

OF INCIDENTAL OR CONSEQUENTIAL

DAMAGES, OR LIMITATIONS ON THE

DURATION OF IMPLIED WARRANTIES, SO

THESE LIMITATIONS OR EXCLUSIONS MAY

NOT APPLY TO YOU. THIS WRITTEN

WARRANTY GIVES YOU SPECIFIC LEGAL

RIGHTS. YOU MAY ALSO HAVE OTHER

RIGHTS THAT VARY FROM STATE TO

STATE.

If You Need Service

Keep your receipt, delivery slip, or some other

appropriate payment record to establish the

warranty period should service be required. If

service is performed, it is in your best interest

to obtain and keep all receipts. Service under

this warranty must be obtained by contacting

Electrolux at the addresses or phone numbers

below.

This warranty only applies in the USA and

Canada. In the USA, your appliance is

warranted by Electrolux Major Appliances

North America, a division of Electrolux Home

Products, Inc. In Canada, your appliance is

warranted by Electrolux Canada Corp.

Electrolux authorizes no person to change or

add to any obligations under this warranty.

Obligations for service and parts under this

warranty must be performed by Electrolux or

an authorized service company. Product

features or specifications as described or

illustrated are subject to change without notice.

USA

1-800-374-4432

Frigidaire

10200 David Taylor Drive

Charlotte, NC 28262

LIMITED WARRANTY

Canada

1-800-265-8352

Electrolux Canada Corp.

5855 Terry Fox Way

Mississauga, Ontario, Canada L5V 3E4

LIMITED WARRANTY

welcome home

Frigidaire.com

1-800-374-4432

Frigidaire.ca

1-800-265-8352

owner support

accessories

service

Our home is your home. Visit us if you

need help with any of these things:

registration

(See your registration card

for more information.)

A17856405 (August 2024)

Frigidaire GRFS287DAF Gallery 28 Cu. Ft. Standard-Depth French Door Refrigerator

Product's Documents

User Manual

Specifications

Frigidaire GRFS287DAF Questions and Answers