1. SAFETY
WARNING! Ensure Health & Safety, local authority and general workshop practice regulations are adhered to when using this
equipment.
9 Familiarise yourself with the application and the limitations of the grease gun, as well as the potential hazards.
9 Keep the work area clean, uncluttered and ensure there is adequate lighting.
9 Keep the grease gun clean for best and safest performance.
9 Check moving parts alignment on a regular basis.
8 DO NOT use the grease gun for any purpose other than that it was designed for.
8 DO NOT operate the grease gun if any parts are damaged or missing, as this may cause failure and/or personal injury.
9 When not in use store in a safe, dry, childproof location.
WARNING! Always wear approved eye protection when operating the grease gun.
2. INTRODUCTION
Robust, double-arm grease gun. Features a protective cap for hose storage preventing contamination. 1/8”BSPT Thread and supplied
with adaptor to t most screw-type cartridges on the market. Supplied with 300mm (12”) delivery hose and 4-jaw coupler.
3. SPECIFICATION
4. OPERATION
4.1. Unscrew the cap of the grease cartridge and push grease out of the
top, then screw into the gun. (This enables the grease to be
initially pushed into the system).
4.2. Ensure that the arm of the grease gun is open when screwing in the
cartridge so that the grease can be pushed past the piston inside
the head.
4.3. Once screwed in push the grease cartridge again to ensure that the
grease is packed inside the head of the grease gun.
4.4. Pump slowly air should be heard rushing through the system until the
grease comes out of the end.
DOUBLE LEVER GREASE GUN
MODEL NO: AK4405
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
AK4405 Issue 1 10/03/25
Original Language Version
© Jack Sealey Limited
Refer to
instructions
Wear eye
protection
Wear protective
gloves
Model No: AK4405
Delivery per Stroke: 0.7cm³
Delivery Pressure: 7000psi
Nett Weight: 0.99kg
Original Language Version
© Jack Sealey Limited
AK4405 Issue 1 10/03/25
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500 sales@sealey.co.uk www.sealey.co.uk
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be
sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment. When
the product becomes completely unserviceable and requires disposal, drain any uids (if applicable) into approved
containers and dispose of the product and uids according to local regulations.
REGISTER YOUR
PURCHASE HERE
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specications and component parts without prior notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
