1
MADE IN CHINA
ASSEMBLY INSTRUCTIONS
ITEM NO: 641
641
Adult assembly required
Small parts may present choking hazard prior to assembly.
Enclosed please find simple step-by-step instructions to help you
quickly assemble your products. Before you begin we recommend
that you following the steps below:
1. Plesae read the instructions thoroughly.
2. Identify all parts and hardware.
3. You will need the following tools:
Philips head screw drive
Flat head screw drive
Hammer
DO NOT use power drills or drivers
To protect your parts during assembly please place them on a soft
surface.
To clean surface use only water on a damp cloth. DO NOT use
window cleaners or cleaning abrasives as it will scratch the surface
and could damage the protective coating.
Dream On Me Inc.
1532 S WASHINGTON AVE
PISCATAWAY TWP NJ 08854
Email: [email protected]
www.dreamonme.com
Dream On Me Haven
Scan the QR code to register your product
https://dreamonme.com/customercare/registration/
2
.
Read all instructions before assembling cradle.KEEP INSTRUCTIONS FOR FUTURE
USE.
Periodically check the safety of your cradle, by making certain all scerws,nuts and bolts
are tightened securely and insepect cradle for damaged hardware, loose joints,missing
parts or sharp edges. DO NOT use the cradle if any parts are missing or broken. Ask your
local dealer for replacement part and instruction literature if needed. DO NOT substitute
parts.
When child is able to climb out unaided, the cradle should no longer be used.
DO NOT suspend items with long strings into cradle. DO NOT place cradle near a window
where cords from blinds or drapes may strangle a child. DO NOT tie pacifiers, necklaces,
or any other item around a chlid’s neck or on the cradle parts. This could cause
strangulation.
DO NOT use a water mattress with this cradle.
DO NOT use shipping or other bags as mattress covers since they can cause suffocation.
Never aim or point a vaporizer or humidifier directly at the cradle as the water vapour
could
ruin the finish of it.
Wash with mild soap and a damp cloth. Do not use abrasives. Avoid furniture polish as it
could be hazardous to your child. If refinishing, use a non-toxic finish specific for children’s
products.
.Failure to follow these warnings and the assembly instructions could result in serious injury
or death.
WARNING
.
.
.
.
.
.
.
FALL HAZARD--To help prevent falls,do not use this product when the infant begins to
push up on hands or has reached 30lbs,whichever comes first.
SUFFOCATION HAZARD--Infants have suffocated in gaps between extra padding and
side of the cradle.On soft bedding Never add a pillow or comforter.Use only the pad
provided by Dream On Me.Never place addtional padding under an infant.
To reduce the risk of SIDS,pediatricians recommend healthy infants be placed on their
backs to sleep,unless otherwise advised by your physician.
If a sheet is used with the pad, use only the one provided by the bassinet or cradle
manufacturer or one specifically designed to fit the dimension of the bassinet or cradle
mattress.
C
3
4
PARTS LIST FOR #641
A: Head board Bottom (2PCS)
B:
Head board Top (2PCS)
a:
Assembly bolt 1-3/4”(8 pcs)
c:
Allen key(2 pcs)
f: Cradle lock (2 pcs)
b:
Shelf brace screw 1-3/8” (6 pcs)
E: Panel MDF (1PC)D: Center Base Rail (1PC)
d: Cradle lock screw (4 pcs)
HARDWARE AND TOOLS DIAGRAM
g:Plastic washers (2 pcs)
F:Mattress (1PC)
PHILLIPS--HEAD SCREWDRIVER
REQUIRED FOR ASSEMBLY
----NOT INCLUDE
Do Not Use Power Drills or Drivers
C:
Rail (2PCS)
b:
4
2
2
a:
1-3/4”
641
(6 pcs)
(2 pcs)
e. cap nut
(4 pcs)
tuerca de tapa
(4 pcs)
Connect rail (B) to one of the headboard (A) by bolts (a)
DO NO’T FULLY TIGHTEN. ALL THE BOLTS.
STEP 1
Insent the bottom shelf (C) to the gap of the
headboard(A) and rails (B).
STE P
2
B
D
B
A
A
5
c
c
a x 8
a
a
a
b
b
D
b x 2
D
A
B
B
A
A
b
b
D
e
e
6
STEP 3
TIGHTEN ALL BOLTS.
Connect another headboard (A) to the rail (B)
by bolts (a)
.
E
B
B
d
7
STEP 4
4
5
5
Connect the four cradle locks(f) to the head
board (A) with the bolts (d) and plastic
washers (g).
f
g
F
B
B
E
Then put in the mattress (D).
d
STEP
Put down the four cradle locks (f) to make the cradle stable.
T
ake it ,then it can swing.
f
UNLOCK
LOCK
B
B
F
8
LIMITED WARRANTY
workmanship and agrees to remedy any such defect.
This is solely limited to the repair or replacement of defective furniture
components and no assembly labor is included.
assembled, subjected to misuse or abuse or which has been altered or
repaired in any way.
rights which vary from State to State.
WARNING: Should this product become damaged, and/or components
are broken or missing, DO NOT USE
Enter our monthly giveaway!
Simply scan the QRcode to register.
Chat with us!
For any questions or concerns or feedback.
1532, S. Washington Avenue
Piscataway, NJ 08854
E-mail: [email protected]
www.dreamonme.com
Follow us on
to get your nursery featured on our social media.
@dreamonmeinc
@dreamonmeinc
