Smart Air Purifier
Questions or Concerns?
Please contact us Mon–Fri, 9:00 am–5:00 pm PST/PDT
at [email protected] or at 1-888-726-8520.
USER MANUAL
Product Series: Core 300S series, Core 300S-P Series
2
Table of Contents
Package Contents
Specifications
Safety Information
Getting to Know Smart Your Air Purifier
Controls
Getting Started
Using Your Smart Purifier
Levoit Replacement Filters
Care & Maintenance
Troubleshooting
Warranty Information
Customer Support
2
2
3
5
6
7
8
12
13
15
19
21
Package Contents
1 × Smart Air Purifier
1 × Pre-installed 3-Stage Original Filter
1 × User Manual
1 × Quick Start Guide
Specifications
Model Core 300S series
Power Supply AC 120V, 60Hz
Rated Power 39W
Operating
Conditions
Temperature:
14°–104°F / -10°–40°C
Humidity: < 85% RH
Noise Level 22–54.5dB
Standby Power < 2W
Dimensions 8.7 × 8.7 × 14.2 in /
22 × 22 × 36 cm
Weight 7.48lb / 3.393kg
Note: To access additional smart functions,
download the free VeSync app (see page 8).
3
SAFETY INFORMATION
• Only use your air purifier as described in
this manual.
• Do not use without removing the plastic
wrap from the filter. The air purifier will not
filter air, and may overheat, causing a fire
hazard.
• Do not use the air purifier outdoors.
• Keep the air purifier away from water, and
wet or damp areas. Never place in water
or liquid.
• Do not use in excessively humid areas.
• Keep the air purifier away from heat
sources.
• Do not use where combustible gases,
vapors, metallic dust, aerosol (spray)
products, or fumes from industrial oil are
present.
• Keep 5 ft / 1.5 m away from where oxygen is
being administered.
• Supervise children when they are near the
air purifier.
• Do not place anything into any opening in
the air purifier.
• Do not sit or place heavy objects on the air
purifier.
• Keep the inside of the air purifier dry. To
prevent moisture buildup, avoid placing in
rooms with major temperature changes or
underneath air conditioners.
• Always unplug the air purifierbefore
servicing ,cleaning or other
maintenances(such aschanging the filter).
To reduce the risk of fire, electric shock, or other injury, follow all instructions and safety guidelines.
General Safety
READ AND SAVE THESE
INSTRUCTIONS
• Do not use the air purifier if it is damaged or
not working correctly, or if the cord or plug
is damaged. Do not try to repair it yourself.
Contact Customer Support (see page 21).
• WARNING: To reduce the risk of fire or
electric shock, do not use this air purifier
with any solid-state speed controls (such
as a dimmer switch).
• WARNING: To Reduce The Risk Of Fire,
Electric Shock Or Injury To Persons, Do
Not Use Replacement Parts That Have Not
Been Recommended By The Manufacturer
(e.g. Parts Made At Home Using A 3D
Printer).
• Not for commercial use. Household use
only.
• This appliance is not intended for used by
persons (including children) with reduced
physical, sensory or mental capabilities,
or lack of experience and knowledge,
unless they have been given supervision or
instruction concerning use of the appliance
by a person responsible for their safety.
• Children should be supervised to ensure that
they do not play with the appliance.
• Cleaning and user maintenance shall not be
made by children without supervision.
4
• Keep the air purifier near the outlet it is
plugged into.
• Never place the cord near any heat source.
• Do not cover the cord with a rug, carpet,
or other covering. Do not place the cord
under furniture or appliances.
• Keep the cord out of areas where people
walk often. Place the cord where it will not
be tripped over.
• This appliance has a polarized plug (one blade
is wider than the other). To reduce the risk of
electric shock, this plug is intended to fit in a
polarized outlet only one way. If the plug does
not fit fully in the outlet, reverse the plug. If it
still does not fit, contact a qualified electrician.
Do not attempt to defeat this safety feature.
• If the supply cord is damaged, it must be
replaced by the manufacturer, its service agent
or similarly qualified persons in order to avoid
a hazard.
Electromagnetic Fields (EMF)
Your Levoit air purifier complies with all standards
regarding electromagnetic fields (EMF). If handled
properly and according to the instructions in this
user manual, the appliance is safe to use based on
scientific evidence available today.
Power & Cord
SAFETY INFORMATION (CONT.)
5
GETTING TO KNOW YOUR SMART AIR PURIFIER
A. Fan Speed Indicators
B. Fan Speed Button
C. On/O Button
D. Sleep Mode Button
E. Timer Button
F. Timer Indicator
G. Wi-Fi® Indicator
H. Auto Mode Button
I. Air Quality Indicator Rings
J. Display O Button
Front, upside downBack
K. Check Filter Indicator
L. Display Lock Button
M. Air Outlets
N. Housing
O. Air Inlets
P. AirSight™ Plus Laser Dust Sensor
Q. Anti-Skid Pads
R. Filter Cover
S. 3-Stage Original Filter
N P
M
O
B
C
D
E
H
I
J
K
L
R
S
A
F
G
Q
6
CONTROLS
On/O Button
• Turns the air purifier on/o.
• Press and hold to configure
the air purifier. See the
VeSync in-app instructions
for more information.
Fan Speed Button
• Cycles through fan speeds:
I (low), II (medium), and III
(high).
• Tapping the Fan Speed
Button while the air purifier
is in Sleep Mode or Auto
Mode will exit that mode.
WiFi Indicator
• Turns on, o, or blinks to
indicate pairing status.
See the VeSync in-app
instructions for more
information.
Sleep Mode Button
• Turns Sleep Mode on (see
page 9).
• Press and hold for 3
seconds to reset the Check
Filter Indicator.
Timer Button
• Cycles through timer
options (see page 10).
• Holding for 2 seconds
allows you to cycle through
the timer options faster.
Display Lock Button
• Prevents current settings
from being changed (see
page 10).
• Blinks when any other
button is tapped to indicate
that Display Lock is on.
Auto Mode
• Turns Auto Mode on (see
page 9).
Check Filter Indicator
• Lights up when the filter
should be checked (see
Check Filter Indicator,
page 13).
• Reset the Check Filter
Indicator by pressing and
holding the Sleep Mode
button for 3 seconds.
Display O Button
• Turns the display o (see
page 10).
• Tap any button (except )
to turn the display back on.
7
3. Replace the filter cover and twist
clockwise to lock. [Figure 1.3]
Figure 1.3
Figure 1.4
15 in /
38 cm
cover should
snap shut
15 in /
38 cm
GETTING STARTED
1. Flip the air purifier over. Twist the filter
cover counterclockwise and remove it.
[Figure 1.1]
Figure 1.1
Figure 1.2
handle facing up
2. Remove the filter from its plastic
packaging and place the filter back into
the air purifier with the handle facing up.
[Figure 1.2]
4. Place the purifier on a flat, stable surface
with the display facing up. Allow at least
15 inches / 38 cm of clearance on all
sides. Keep away from anything that
would block airflow, such as curtains.
[Figure 1.4]
8
USING YOUR SMART
AIR PURIFIER
1. Plug in and tap to turn on the air
purifier. The fan will start on level I.
2. Optionally, tap to change fan speed
between I, II, and III.
Note:
• The indicators are not buttons and
cannot be used to change the fan
speed.
• The fan speed indicators will light up
when active.
• Fan speed III is the loudest, but cleans
air the quickest.
• For best results, or to address a specific
air quality issue such as smoke, run the
air purifier at high speed (level III) for
15–20 minutes before using a lower
speed.
• To eectively clean air, keep windows
and doors closed while the air purifier
is on.
3. Tap to turn o the air purifier.
Figure 2.1
Note: You must create your own VeSync account
to access voice assistants.
1. To download the VeSync app, scan the
QR code or search “VeSync” in the Apple
App Store® or Google Play Store.
2. Open the VeSync app. Log In or Sign Up.
3. Follow the in-app instructions to set up
your smart air purifier.
You can use the VeSync app to connect
your smart air purifier to Amazon Alexa or
Google Assistant™. Please follow in-app
instructions to set up your voice assistant.
VeSync App Setup
Connect with Amazon Alexa or
Google Assistant™
Note:
• To disconnect Wi-Fi, press and hold the
On/O button for 15 seconds until the
Wi-Fi indicator turns o. This will restore
the smart air purifier’s default settings
and disconnect it from the VeSync app.
• To reconnect, please follow the
instructions in the VeSync app for
adding a device.
9
Sleep Mode operates quietly by using a fan
speed lower than fan speed 1.
1. Tap to turn Sleep Mode on/o.
2. Sleep Mode will turn o the display
after 3 seconds if no other buttons are
pressed.
Auto Mode uses AirSight Plus, a smart
laser dust sensor inside the air purifier, to
adjust the fan speed automatically based
on air quality. For example, if the air
quality is bad, the fan will automatically
be set to high speed.
The air purifier is in Standby Mode when it is
turned o, but plugged in.
Note: Display lock can be used while the
air purifier is in Standby Mode to keep the
air purifier from turning back on. The laser
dust sensor will still detect the surrounding
air quality and give you updates in the
VeSync app.
Note:
• When the display is turned o, press
any button (except ) to turn the
display back on. If you don’t press
another button, the display will turn o
again after 3 seconds.
• The Check Filter Indicator will still turn
on and stay on if it’s time to check your
filter (see page 13).
Note:
• The air purifier will take 5 seconds
to detect the air quality each time
it is turned on. During this time, the
air quality indicator rings will be
blue. After 5 seconds, the air quality
indicator rings will change color
based on the detected air quality.
• The VeSync app also supports
additional auto modes: Quiet Auto
Mode and Ecient Auto Mode
(see page 11).
USING YOUR PURIFIER (CONT.)
Air Quality Indicator Chart
Indicator
Color
Air
Quality
Auto Mode
Fan Speed
Blue Very Good Sleep Mode
Green Good Low
Orange Moderate Medium
Red Bad High
When the air purifier is plugged in and
turned o, it will remember its previous fan
speed, Sleep Mode, Auto Mode, Display
Lock, and Display O settings.
When the air purifier is unplugged and
turned o, it will only remember its previous
fan speed, Sleep Mode, and Auto Mode.
Note: The air purifier will remember the
last timer setting chosen (1–12 hours), but it
will not automatically resume the timer. You
will need to reselect the timer after the air
purifier is turned back on.
Memory Function Auto Mode
Standby Mode
Sleep Mode
10
You can set a timer for 1–12 hours.
1. Tap repeatedly to select a time in
1-hour increments. When you’ve chosen
your time, the display will flash 3 times,
and the timer will start automatically.
When the air purifier is on, you can lock
the display to prevent settings from
being accidentally changed. Buttons
will not respond to being tapped.
1. Tap and hold for 3 seconds to
lock/unlock the display.
2. will turn light up, and will
flash 3 times.
This turns o the display lights on the air
purifier, including button lights and indicator
lights (except the Check Filter Indicator).
1. Press to turn o the display.
2. Tap any button (except or ) to
temporarily turn the display back on.
If you don’t press another button, the
display will turn back o after 3 seconds.
3. Press to turn the display back on.
The display will stay on.
Note:
• You can change the fan speed
at any time while the timer is on.
• The timer will restart if the time
is changed.
• The air purifier will remember the
last timer setting while turned o,
but the timer will be cancelled and
need to be restarted.
• You can set a timer for 1–24 hours
in the VeSync app.
Note: The Check Filter Indicator will still turn
on and stay on if it’s time to check your filter
(see page 13).
2. When the timer is finished, the air purifier
will turn o.
3. To cancel a timer, tap until the display
reads “--H” and flashes 3 times.
Note:
• The timer indicator will count down
from your selected time, and the air
purifier will turn o when it’s finished.
• Press and hold for 2 seconds to
cycle through timer options faster.
• The timer indicator cannot be used to
select a time.
• The indicator will light up when active.
Note:
• When the display is locked, will
flash 3 times if you tap other buttons
on the display.
• Display lock can still be used when
the air purifier is in Standby Mode.
USING YOUR PURIFIER (CONT.)
Timer Display Off
Display Lock
11
The VeSync app allows you to access
additional smart air purifier functions,
including those listed below. As the app
develops, more features may become
available.
Remote Control
• Change any air purifier settings
through the app, even while
Display Lock is on.
Timer Function
• Set a timer between 1—24 hours.
Air Quality Updates
• View real-time PM2.5 updates in
the app.
• See your air quality history for the
previous week.
Filter Replacement Info
• Keep tabs on the remaining filter life
by checking the filter life percentage
in the app.
• Shop for replacement filters.
Schedules
• Create and customize schedules for
your air purifier to match your routines.
Auto Mode
• Access additional Auto Modes: Quiet
Auto Mode and Ecient Auto Mode.
• Quiet Auto Mode never uses the
highest fan speed to avoid making
too much noise.
• Ecient Auto Mode lets you choose
the size of the area you want to
purify. The air purifier will use the
highest fan speed to clean the air
in that area. Once your air is clean,
it will lower to the fan speed best
suited to the selected room size.
USING YOUR PURIFIER (CONT.)
VeSync App Functions
12
Your air purifier comes with a Levoit 3-Stage Original Filter. You can also choose a
replacement filter with additional capabilities. Choose the filter best suited to the
environment of your home.
Traps fine particles such as dust, pollen, and pet dander while adsorbing common
household smells such as pet odors and cooking smells.
Best used for: allergies, dust, and light odors
Get all the benefits of the Original Filter with the addition of a High-Eciency Activated
Carbon Filter, which is very eective for strong smells and is customized to address pet
odors and cooking smells.
Best used for: pet allergies, bad-smelling rooms
Get all the benefits of the Original Filter with the addition of a High-Eciency Activated
Carbon Filter, which is very eective for strong smells and is customized to address
air pollution, cigarette smoke, vehicle exhaust, toxic gases and fumes, volatile organic
compounds (VOCs), and smoke from wildfires.
Best used for: high air pollution, smoke
Core 300-P-RF
Levoit 3-Stage Original Filter
Core 300-RF-PA
Levoit 3-Stage Pet Allergy Filter
Core 300-RF-TX
Levoit 3-Stage Toxin Absorber Filter
LEVOIT REPLACEMENT FILTERS
13
Resetting the Check
Filter Indicator
Reset the Check Filter Indicator when:
A. lights up red.
1. Replace the filter (see page 14).
2. Turn on the air purifier.
3. Press and hold for 3 seconds.
4. will turn o when successfully reset.
B. The filter was changed before
lit up.
1. Press and hold for 3 seconds.
2. The will flash for 3 seconds.
3. will turn o when successfully reset.
CARE & MAINTENANCE
Figure 3.1
will light up as a reminder to check the
filter. You will also receive a notification from
VeSync when it’s time to check your filter,
and you can view your filter life percentage
in the app at any time. Depending on how
often you use the air purifier, the indicator
should turn on within 6–8 months. You may
not need to replace your filter yet, but you
should check it when turns on.
Check Filter Indicator
Cleaning the Smart Air Purifier
• Unplug before cleaning.
• Wipe the outside of the air purifier
with a soft, dry cloth. If necessary,
wipe the housing with a damp cloth,
then immediately dry.
• Vacuum the inside of the air purifier.
• Do not clean with abrasive chemicals
or flammable cleaning agents.
Filter When to Clean How to Clean When to Replace
Pre-Filter
Every 2–4
weeks
Use a soft brush or vacuum
hose [Figure 3.1]
6–8 months
Main Filter Do not clean
The outer pre-filter should be cleaned every
2–4 weeks to increase eciency and extend
the life of your filter. Clean the pre-filter using
a soft brush or vacuum hose to remove hair,
dust, and large particles. [Figure 3.1] Do not
clean the filter with water or other liquids.
Cleaning the Filter
14
1. Unplug the air purifier. Flip the air
purifier over and remove the filter
cover (see Getting Started, page 7).
2. Remove the old filter.
3. Clean out any remaining dust or hair
inside the air purifier using a vacuum
hose. Do not use water or liquids to
clean the air purifier. [Figure 3.2]
4. Unwrap the new filter and place it into the
housing (see Getting Started, page 7).
5. Replace the cover. Plug in the air purifier.
6. Reset the Check Filter Indicator
(see page 13).
The AirSight Plus Laser Dust Sensor can be
blocked by dust, which aects the sensor’s
accuracy. Clean the sensor every 3 months.
Using your air purifier in an environment with
more dust may mean you will need to clean
the sensor more often.
1. Unplug the air purifier.
2. Place the end of a vacuum cleaner over
the sensor openings. [Figure 3.3]
3. Turn the vacuum on for at least 10
seconds to clean out dust.
Replacing the Filter
Cleaning the AirSight Plus
Laser Dust Sensor
Figure 3.2
Figure 3.3
If not using the air purifier for an extended
period of time, wrap both the air purifier and
the filter in plastic packaging and store in a
dry place to avoid moisture damage.
Storage
CARE & MAINTENANCE (CONT.)
The filter should be replaced every 6–8
months. You may need to replace your
filter earlier or later depending on how
often you use your air purifier. Using
your air purifier in an environment with
relatively high pollution may mean you
will need to replace the filter more
often, even if is o.
You may need to replace your filter if
you notice:
• Increased noise when the air
purifier is on
• Decreased airflow
• Unusual odors
• A visibly clogged filter
When Should I Replace the
Filter?
Note:
• To maintain the performance of your air
purifier, only use ocial Levoit filters.
For more information, contact Customer
Support.
• Remember to reset after changing
the filter (see page 13).
15
Problem Possible Solution
Air purifier will not turn on or
respond to button controls.
Plug in the air purifier.
Check to see if the power cord is damaged. If it is, stop using
the air purifier and contact Customer Support (see page 21).
Plug the air purifier into a dierent outlet.
The air purifier may be malfunctioning. Contact Customer
Support (see page 21).
Airflow is significantly
reduced.
Make sure the filter is removed from its packaging and
properly in place (see page 7).
Tap to increase the fan speed.
Leave 15 inches / 38 cm of clearance on all sides of the
air purifier.
The pre-filter may be clogged by large particles, such as hair
or lint, blocking airflow. Clean the pre-filter (see page 13).
Replace the filter (see page 14).
Air purifier makes an unusual
noise while the fan is on.
Make sure the filter is properly in place with plastic
packaging removed (see page 7).
Make sure the air purifier is operating on a hard, flat,
level surface.
Replace the filter (see page 14).
The air purifier may be damaged, or a foreign object may
be inside. Stop using the air purifier and contact Customer
Support (see page 21). Do not try to repair the air purifier.
Strange smell coming from
the air purifier.
Clean the filter, or replace if necessary.
Contact Customer Support (see page 21).
Make sure not to use your air purifier in an area with high
humidity or while diusing essential oils.
TROUBLESHOOTING
16
If your problem is not listed, please contact Customer Support (see page 21).
TROUBLESHOOTING (CONT.)
Problem Possible Solution
Poor air purification quality.
Tap to increase the fan speed.
Make sure no objects are blocking the sides or top of the air
purifier (the inlet or outlet).
Make sure the filter is removed from its packaging and
properly in place (see page 7).
Close doors and windows while using the air purifier.
Make sure the room is smaller than 219 ft² / 20 m².
The air purifier may not be as eective in larger rooms.
Replace the filter (see page 14).
is still on after replacing
the filter.
Reset the Check Filter Indicator (see page 13).
has not turned on within
8 months.
is a reminder for you to check the filter and will light
up based on how much the air purifier has been used
(see page 13). If you don’t use your air purifier often,
will take longer to turn on.
turned on before 6
months.
is a reminder for you to check the filter and will light
up based on how much the air purifier has been used
(see page 13). If you run your air purifier frequently,
will turn on sooner.
Air Quality Indicator always
stays red.
The AirSight Plus Laser Dust Sensor may need to be
cleaned (see page 14).
If you’re using an ultrasonic humidifier near the air purifier,
the mist may aect the accuracy of the AirSight Plus Laser
Dust Sensor. The sensor will detect the large mist particles,
and the Air Quality Indicator may turn red. Avoid using an
ultrasonic humidifier near the air purifier, or use a dierent
mode besides Auto Mode.
Air Quality Indicator always
stays blue, even when the air
quality is poor.
The AirSight Plus Laser Dust Sensor detects airborne
particles, but it cannot detect gas. Make sure there isn’t gas
polluting the air.
Display shows Error Code
“E1”.
The motor has malfunctioned. Please contact Customer
Support (see page 21).
17
If your problem is not listed, please contact Customer Support (see page 21).
VESYNC APP TROUBLESHOOTING
ATTRIBUTIONS
My air purifier isn’t connecting to the VeSync app.
• During the setup process, you must be on a secure 2.4GHz WiFi network. Confirm that
the network is working correctly.
• Make sure the WiFi password you entered is correct.
• There should be no spaces at the beginning or end of the password.
• Test the password by connecting a dierent electronic device to the router.
• If you’re manually typing in the SSID and password, double check that both are
entered correctly.
• Try moving your air purifier closer to the router. Your phone should be as close as
possible to your air purifier.
• Your router may need to be at a higher location, away from obstructions.
• Make sure your air purifier and router are away from appliances (such as microwave
ovens, refrigerators, electronic devices, etc.) to avoid signal interference.
• If you’re using a VPN, make sure it’s turned o while setting up your air purifier.
• Disable portal authentication for your WiFi network. If portal authentication is enabled,
the air purifier will not be able to access your WiFi network, and setup will fail.
My air purifier is oine.
• Make sure the air purifier is plugged in and has power, then refresh the VeSync menu
by swiping down on the screen.
• Make sure your router is connected to the internet and your phone’s network
connection is working.
• Delete the oine air purifier from the VeSync app. Swipe left (iOS®) or tap and hold
(Android™), then tap Delete. Reconfigure the air purifier with the VeSync app.
Note: Portal authentication means that you need to sign in to your WiFi network
through a web page before you can use the Internet.
Note: Power outages, internet outages, or changing WiFi routers may cause the
air purifier to go oine.
Amazon, Alexa, and all related logos are trademarks of Amazon.com, Inc. or its aliates.
Google, Android, and Google Play are trademarks of Google LLC.
App Store® is a trademark of Apple Inc.
Wi-Fi® is a registered trademark of Wi-Fi Alliance®.
iOS is a registered trademark of Cisco Systems, Inc. and/or its aliates in the United States
and certain other countries.
18
FEDERAL COMMUNICATION COMMISSION
INTERFERENCE STATEMENT
FCC RADIATION EXPOSURE STATEMENT
FCC SDOC SUPPLIER’S DECLARATION
OF CONFORMITY
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that
may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment o and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate this equipment.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. End users must follow the specific operating instructions for satisfying RF
exposure compliance. To maintain compliance with FCC RF exposure compliance requirements,
please follow operation instructions as documented in this manual. This transmitter must not be
co-located or operating in conjunction with any other antenna or transmitter. This equipment
should be installed and operated with a minimum distance of 20cm between the radiator and
your body. The availability of some specific channels and/or operational frequency bands
are country dependent and are firmware programmed at the factory to match the intended
destination. The firmware setting is not accessible by the end user.
Arovast Corporation hereby declares that this equipment is in compliance with the FCC rules.
The declaration of conformity may be consulted in the support section of our Web site,
accessible from www.levoit.com
19
Product Name Smart Air Purifier
Model Core 300S
For your own reference, we strongly
recommend that you record your
order ID and date of purchase.
Date of Purchase
Order ID
WARRANTY INFORMATION
Levoit Limited Product Warranty
Register your products at https://warranty.levoit.com/warranty
to stay up to date with important product information such as
product updates, limited warranties, usage and maintenance
recommendations, and notifications concerning safety
warnings or product recalls. Registration is not required to
claim your limited warranty.
Two (2) Year Limited Consumer Product Warranty
Arovast Corporation (“Arovast”) warrants that the product
shall be free from defects in material and workmanship for
a period of 2 years from the date of original purchase
(“Limited Warranty Period”), provided the product was used
in accordance with its use and care instructions (e.g., in the
intended environment and under normal circumstances).
Your Limited Warranty Benefits
During the Limited Warranty Period and subject to this
limited Warranty Policy, Arovast will, in its sole and
exclusive discretion, either (i) refund the purchase price
if the purchase was made directly from the online Levoit
store, (ii) repair any defects in material or workmanship,
(iii) replace the product with another product of equal or
greater value, or (iv) provide store credit in the amount of
the purchase price.
Who is Covered?
This limited warranty extends only to the original consumer
purchaser of the product and is not transferable to any
subsequent owner of the product, regardless of whether
the product transferred ownership during the specified
term of the limited warranty. The original consumer
purchaser must provide verification of the defect or
malfunction and proof of the date of purchase to claim the
Limited Warranty Benefits.
Be Aware of Unauthorized Dealers or Sellers
This limited warranty does not extend to products
purchased from unauthorized dealers or sellers. Arovast’s
limited warranty only extends to products purchased from
authorized dealers or sellers that are subject to Arovast’s
quality controls and have agreed to follow its quality
controls. Please be aware, products purchased from an
unauthorized website or dealer may be counterfeit, used,
defective, or may not be designed for use in your country.
You can protect yourself and your products by making sure
you only purchase from Arovast or its authorized dealers.
If you have any questions about a specific seller, or if
you think you may have purchased your product from an
unauthorized seller, please contact our Customer Support
Team via [email protected].
What’s Not Covered?
• Normal wear and tear, including parts that might wear
out over time (e.g., batteries, filters, cleaning brush,
essential oil pads, etc.).
• If the proof-of-purchase has been altered in any way or
is made illegible.
• If the model number, serial number or production date
code on the product has been altered, removed or
made illegible.
• If the product has been modified from its original condition.
• If the product has not been used in accordance with
directions and instructions in the user manual.
• Damages caused by connecting peripherals,
additional equipment or accessories other than those
recommended in the user manual.
• Damages or defects caused by accident, abuse,
misuse, or improper or inadequate maintenance.
• Damages or defects caused by service or repair of the
product performed by an unauthorized service provider
or by anyone other than Arovast.
• Damages or defects occurring during commercial use,
rental use, or any use for which the product is not intended.
• If the unit has been damaged, including but not limited
to damage by animals, lightning, abnormal voltage,
fire, natural disaster, transportation, dishwasher, or
water (unless the user manual expressly states that the
product is dishwasher-safe).
• Incidental and consequential damages.
• Damages or defects exceeding the cost of the product.
Claiming Your Limited Warranty Service in 5 Simple Steps:
1. Make sure your product is within the specified
limited warranty period.
2. Make sure you have a copy of the invoice and order
ID or proof-of-purchase.
3. Make sure you have your product. DO NOT dispose
of your product before contacting us.
4. Contact our Customer Support Team via
5. Once our Customer Support Team has approved
your request, please return the product with a copy
of the invoice and order ID.
20
Sole and Exclusive Remedy
THE FOREGOING LIMITED WARRANTY CONSTITUTES
AROVAST CORPORATION’S EXCLUSIVE LIABILITY, AND
YOUR SOLE AND EXCLUSIVE REMEDY, FOR ANY BREACH
OF ANY WARRANTY OR OTHER NONCONFORMITY OF
THE PRODUCT COVERED BY THIS LIMITED PRODUCT
WARRANTY STATEMENT. THIS LIMITED WARRANTY IS
EXCLUSIVE, AND IN LIEU OF ALL OTHER WARRANTIES.
NO EMPLOYEE OF AROVAST CORPORATION OR
ANY OTHER PARTY IS AUTHORIZED TO MAKE ANY
WARRANTY IN ADDITION TO THE LIMITED WARRANTY IN
THIS LIMITED PRODUCT WARRANTY STATEMENT.
Disclaimer of Limited Warranties
TO THE FULLEST EXTENT PROVIDED BY APPLICABLE
LAW, EXCEPT AS WARRANTED IN THIS LIMITED PRODUCT
WARRANTY POLICY, AROVAST CORPORATION PROVIDES
THE PRODUCTS YOU PURCHASE FROM AROVAST
CORPORATION “AS IS” AND AROVAST CORPORATION
HEREBY DISCLAIMS ALL WARRANTIES OF ANY KIND,
WHETHER EXPRESS OR IMPLIED, STATUTORY, OR
OTHERWISE, INCLUDING BUT NOT LIMITED TO ANY
WARRANTIES OF MERCHANTABILITY, NON-INFRINGEMENT,
AND FITNESS FOR PARTICULAR PURPOSE.
Limitations of Liability
TO THE FULLEST EXTENT PROVIDED BY APPLICABLE
LAW, IN NO EVENT WILL AROVAST CORPORATION, ITS
AFFILIATES, OR THEIR LICENSORS, SERVICE PROVIDERS,
EMPLOYEES, AGENTS, OFFICERS, OR DIRECTORS BE
LIABLE FOR:
(a) DAMAGES OF ANY KIND ARISING OUT OF OR IN
CONNECTION WITH PRODUCTS PURCHASED FROM
AROVAST CORPORATION IN EXCESS OF THE PURCHASE
PRICE PAID BY THE PURCHASER FOR SUCH PRODUCTS, OR
(b) INDIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL, OR
PUNITIVE DAMAGES EVEN IF AROVAST CORPORATION
OR ONE OF ITS SUPPLIERS HAS BEEN ADVISED OF THE
POSSIBILITY OR LIKELIHOOD OF SUCH DAMAGES.
AND REGARDLESS OF WHETHER CAUSED BY TORT
(INCLUDING NEGLIGENCE), BREACH OF CONTRACT,
OR OTHERWISE. OUR LIABILITY SHALL UNDER NO
CIRCUMSTANCES EXCEED THE ACTUAL AMOUNT PAID
BY YOU FOR THE DEFECTIVE PRODUCT, NOR SHALL
WE UNDER ANY CIRCUMSTANCES BE LIABLE FOR ANY
CONSEQUENTIAL, INCIDENTAL, SPECIAL OR PUNITIVE
DAMAGES OR LOSSES, WHETHER DIRECT OR INDIRECT.
EXCEPT AS COVERED BY THIS LIMITED PRODUCT
WARRANTY STATEMENT, AROVAST CORPORATION
SHALL NOT BE LIABLE FOR COSTS ASSOCIATED
WITH THE REPLACEMENT OR REPAIR OF PRODUCTS
PURCHASED FROM IT, INCLUDING, BUT NOT LIMITED TO,
LABOR, INSTALLATION, OR OTHER COSTS INCURRED BY
THE USER AND, IN PARTICULAR, ANY COSTS RELATING
TO THE REMOVAL OR REPLACEMENT OF ANY PRODUCT.
OTHER RIGHTS YOU MAY HAVE
SOME JURISDICTIONS DO NOT ALLOW FOR: (1)
EXCLUSION OF IMPLIED WARRANTIES; (2) LIMITATION
ON THE DURATION OF IMPLIED WARRANTIES; AND/
OR (3) EXCLUSION OR LIMITATION OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES; SO THE DISCLAIMERS
IN THIS POLICY MAY NOT APPLY TO YOU. IN THESE
JURISDICTIONS YOU HAVE ONLY THE IMPLIED
WARRANTIES THAT ARE EXPRESSLY REQUIRED TO BE
PROVIDED IN ACCORDANCE WITH APPLICABLE LAW. THE
LIMITATIONS OF WARRANTIES, LIABILITY, AND REMEDIES
APPLY TO THE MAXIMUM EXTENT PERMITTED BY LAW.
ALTHOUGH THIS LIMITED WARRANTY GIVES YOU
SPECIFIC LEGAL RIGHTS, YOU MAY HAVE OTHER RIGHTS
IN YOUR JURISDICTION. THIS STATEMENT OF LIMITED
WARRANTY IS SUBJECT TO APPLICABLE LAWS THAT
APPLY TO YOU AND THE PRODUCT. PLEASE REVIEW THE
LAWS IN YOUR JURISDICTION TO UNDERSTAND YOUR
RIGHTS FULLY.
CHANGES TO THIS POLICY
We may change the terms and availability of this limited
warranty at our discretion, but any changes will not be
retroactive.
This warranty is made by:
AROVAST CORPORATION
1202 N. Miller St., Suite A
Anaheim, CA 92806, USA
21
CUSTOMER SUPPORT
If you have any questions or concerns about
your new product, please contact our helpful
Customer Support Team.
Arovast Corporation
1202 N. Miller St., Suite A
Anaheim, CA 92806, USA
Email: [email protected]
Toll-Free: 1-888-726-8520
Mon–Fri, 9:00 am–5:00 pm PST/PDT
Support Hours
*Please have your order invoice PDF or
screenshot(s) ready before contacting
Customer Support.
The energy eciency of this ENERGY STAR certified model is
measured based on a ratio between the model’s CADR for
Smoke and the electrical energy it consumes, or CADR/Watt.
NOTES
NOTES
A2_24I02 us
