T3 10.
4
"
Tablet
User Manual
Brand
LincPlus
Model
T3
CPU
MediaTek MT8 7 8 1 Octa- Core
OS
Android 1 3
Memory
8G LpDDR4
Storage
1 28 G eMMC/uFS+DDR
Display
10.36 inch, 2000x1200, IPS
Touch
Incell, 10piont
Case
Full Metal
Battery
7000mAH/3.8V
Camera
Front 8 M, Rear 13M, Flashlight
Wi- Fi
2.4G/5G 802.11 a/b/g/n/ac
Bluetooth
Bluetooth 5.2
I/ O
USB port
USB TypeC,USB data and audio out
SD port
Micro SD
Button
Power, VOL-, VOL+
Sensor
G- sensor/ L-Sensor/ P-Sensor
GNSS
GPS/ BeiDou/ Glonass/ Galileo
Microphones
1x MIC
Speaker
4x 1W Box Speaker
Charger
2 0 W, Support PD/ PE+ quick charger
Dimension
249x159x7.9mm,8.8mm narrow bezel
Weight
Tablet 480g
Contains
Tablet, Charging cable, Charging head, Ejection
pin, Manual
① Power button ② Volume up/ down ③ Microphone
④ Front camera ⑤ Speakers ⑥ USB port ⑦ Charging indicator
⑧ Micro SD ⑨Flash Light ⑩ Rear camera
Dear customer;
LincPlus would like to thank you for your recent purchase. We truly
care about your user experience.
If you have any questions or concerns, please feel free to contact us.
Our customer support team is standing by to assist you.
Best regards
LincPlus Service Team
E2EURO Consulting HUNGARY (for Prodsg authorities only)
Hoferstrasse 9b, 71636 Ludwigsburg Germany
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1)This device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
FCC Caution
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including interference
that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
Information to the user.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
Specific Absorption Rate (SAR) information:
This mobile phone meets the government's requirements for exposure to radio
waves. The guidelines are based on standards that were developed by
independent scientific organizations through periodic and thorough evaluation
of scientific studies. The standards include a substantial safety margin designed
to assure the safety of all persons regardless of age or health.
FCC RF Exposure Information and Statement The SAR limit of USA (FCC) is
1.6 W/kg averaged over one gram of tissue. Device types: Portable Equipment
(FCC ID: 2AHYJ-TVE1070M) has also been tested against this SAR limit. The
highest SAR value reported under this standard during product certification for
use at the the body& worn is 0.422W/kg. This device was tested for typical
body-worn operations with the back of the handset kept 0mm from the body. To
maintain compliance with FCC RF exposure requirements, use accessories that
maintain a 0mm separation distance between the user's body and the back of
the handset. The use of belt clips, holsters and similar accessories should not
contain metallic components in its assembly. The use of accessories that does
not satisfy these requirements may not comply with FCC RF exposure
requirements, and should be avoided.
