12F, A4, Nanshan Zhiyuan, 1001 Xueyuan Avenue, Nanshan Dist., ShenZhen ,PRC
This device complies with part 15 of the FCC rules. Operation is subject to the
following two conditions: ( 1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interfer-
ence that may cause undesired operation.
15.21 Information to the user.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
15.105 Information for the user.
Note: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with
theinstructions, may cause interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installa-
tion. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connecting the equipment to a socket on a circuit different from that to
which the receiver is connected.
- Contact with the provider or a radio TV technician for help. Specific
absorption rate (SAR):
This Tablet meets the government's requirements for exposure to radio
waves. The guidelines are based on standards developed by independent
scientific organizations through periodic and thorough evaluation of scientific
studies. The standards include a margin of safety designed to ensure the safety
of all people regardless of their age or health.
The FCC Statement of Exposure to RF and the SAR limit for the United States
(FCC) is 1.6 W/kg average for each gram of tissue. This device was tested for
typical operations of use on the body, with the back of the Tablet at 0mm
from the body. To maintain compliance with FCC RF exposure require-
ments, use accessories that maintain a distance of 0mm between the user's
body
and the back of the Tablet . The use of belt clips, covers and similar accessories
must not contain metallic components in their assembly. The use of accesso-
ries that do not meet these requirements may not meet FCC RF exposure
requirements and should be avoided.
Functioning in the body
This device was tested for typical operations of use in the body. To comply with
RF exposure requirements, a minimum separation distance of 0mm must be
maintained between the user's body and the telephone, including the
antenna. Third-party accessories such as belt clips. covers and similar
accessories used with this device should not contain metallic components,
accessories that do not meet these RF exposure requirements and should be
avoided from use on the body. Use
only the supplied antenna or an approved antenna.
9 10
12F, A4, Nanshan Zhiyuan, 1001 Xueyuan Avenue, Nanshan Dist., ShenZhen ,PRC
This device complies with part 15 of the FCC rules. Operation is subject to the
following two conditions: ( 1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interfer-
ence that may cause undesired operation.
15.21 Information to the user.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
15.105 Information for the user.
Note: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with
theinstructions, may cause interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installa-
tion. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connecting the equipment to a socket on a circuit different from that to
which the receiver is connected.
- Contact with the provider or a radio TV technician for help. Specific
absorption rate (SAR):
This Tablet meets the government's requirements for exposure to radio
waves. The guidelines are based on standards developed by independent
scientific organizations through periodic and thorough evaluation of scientific
studies. The standards include a margin of safety designed to ensure the safety
of all people regardless of their age or health.
The FCC Statement of Exposure to RF and the SAR limit for the United States
(FCC) is 1.6 W/kg average for each gram of tissue. This device was tested for
typical operations of use on the body, with the back of the Tablet at 0mm
from the body. To maintain compliance with FCC RF exposure require-
ments, use accessories that maintain a distance of 0mm between the user's
body
and the back of the Tablet . The use of belt clips, covers and similar accessories
must not contain metallic components in their assembly. The use of accesso-
ries that do not meet these requirements may not meet FCC RF exposure
requirements and should be avoided.
Functioning in the body
This device was tested for typical operations of use in the body. To comply with
RF exposure requirements, a minimum separation distance of 0mm must be
maintained between the user's body and the telephone, including the
antenna. Third-party accessories such as belt clips. covers and similar
accessories used with this device should not contain metallic components,
accessories that do not meet these RF exposure requirements and should be
avoided from use on the body. Use
only the supplied antenna or an approved antenna.
9 10
12F, A4, Nanshan Zhiyuan, 1001 Xueyuan Avenue, Nanshan Dist., ShenZhen ,PRC
This device complies with part 15 of the FCC rules. Operation is subject to the
following two conditions: ( 1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interfer-
ence that may cause undesired operation.
15.21 Information to the user.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
15.105 Information for the user.
Note: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with
theinstructions, may cause interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installa-
tion. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connecting the equipment to a socket on a circuit different from that to
which the receiver is connected.
- Contact with the provider or a radio TV technician for help. Specific
absorption rate (SAR):
This Tablet meets the government's requirements for exposure to radio
waves. The guidelines are based on standards developed by independent
scientific organizations through periodic and thorough evaluation of scientific
studies. The standards include a margin of safety designed to ensure the safety
of all people regardless of their age or health.
The FCC Statement of Exposure to RF and the SAR limit for the United States
(FCC) is 1.6 W/kg average for each gram of tissue. This device was tested for
typical operations of use on the body, with the back of the Tablet at 0mm
from the body. To maintain compliance with FCC RF exposure require-
ments, use accessories that maintain a distance of 0mm between the user's
body
and the back of the Tablet . The use of belt clips, covers and similar accessories
must not contain metallic components in their assembly. The use of accesso-
ries that do not meet these requirements may not meet FCC RF exposure
requirements and should be avoided.
Functioning in the body
This device was tested for typical operations of use in the body. To comply with
RF exposure requirements, a minimum separation distance of 0mm must be
maintained between the user's body and the telephone, including the
antenna. Third-party accessories such as belt clips. covers and similar
accessories used with this device should not contain metallic components,
accessories that do not meet these RF exposure requirements and should be
avoided from use on the body. Use
only the supplied antenna or an approved antenna.
9 10
12F, A4, Nanshan Zhiyuan, 1001 Xueyuan Avenue, Nanshan Dist., ShenZhen ,PRC
This device complies with part 15 of the FCC rules. Operation is subject to the
following two conditions: ( 1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interfer-
ence that may cause undesired operation.
15.21 Information to the user.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
15.105 Information for the user.
Note: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with
theinstructions, may cause interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installa-
tion. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connecting the equipment to a socket on a circuit different from that to
which the receiver is connected.
- Contact with the provider or a radio TV technician for help. Specific
absorption rate (SAR):
This Tablet meets the government's requirements for exposure to radio
waves. The guidelines are based on standards developed by independent
scientific organizations through periodic and thorough evaluation of scientific
studies. The standards include a margin of safety designed to ensure the safety
of all people regardless of their age or health.
The FCC Statement of Exposure to RF and the SAR limit for the United States
(FCC) is 1.6 W/kg average for each gram of tissue. This device was tested for
typical operations of use on the body, with the back of the Tablet at 0mm
from the body. To maintain compliance with FCC RF exposure require-
ments, use accessories that maintain a distance of 0mm between the user's
body
and the back of the Tablet . The use of belt clips, covers and similar accessories
must not contain metallic components in their assembly. The use of accesso-
ries that do not meet these requirements may not meet FCC RF exposure
requirements and should be avoided.
Functioning in the body
This device was tested for typical operations of use in the body. To comply with
RF exposure requirements, a minimum separation distance of 0mm must be
maintained between the user's body and the telephone, including the
antenna. Third-party accessories such as belt clips. covers and similar
accessories used with this device should not contain metallic components,
accessories that do not meet these RF exposure requirements and should be
avoided from use on the body. Use
only the supplied antenna or an approved antenna.
9 10
12F, A4, Nanshan Zhiyuan, 1001 Xueyuan Avenue, Nanshan Dist., ShenZhen ,PRC
This device complies with part 15 of the FCC rules. Operation is subject to the
following two conditions: ( 1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interfer-
ence that may cause undesired operation.
15.21 Information to the user.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
15.105 Information for the user.
Note: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with
theinstructions, may cause interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installa-
tion. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connecting the equipment to a socket on a circuit different from that to
which the receiver is connected.
- Contact with the provider or a radio TV technician for help. Specific
absorption rate (SAR):
This Tablet meets the government's requirements for exposure to radio
waves. The guidelines are based on standards developed by independent
scientific organizations through periodic and thorough evaluation of scientific
studies. The standards include a margin of safety designed to ensure the safety
of all people regardless of their age or health.
The FCC Statement of Exposure to RF and the SAR limit for the United States
(FCC) is 1.6 W/kg average for each gram of tissue. This device was tested for
typical operations of use on the body, with the back of the Tablet at 0mm
from the body. To maintain compliance with FCC RF exposure require-
ments, use accessories that maintain a distance of 0mm between the user's
body
and the back of the Tablet . The use of belt clips, covers and similar accessories
must not contain metallic components in their assembly. The use of accesso-
ries that do not meet these requirements may not meet FCC RF exposure
requirements and should be avoided.
Functioning in the body
This device was tested for typical operations of use in the body. To comply with
RF exposure requirements, a minimum separation distance of 0mm must be
maintained between the user's body and the telephone, including the
antenna. Third-party accessories such as belt clips. covers and similar
accessories used with this device should not contain metallic components,
accessories that do not meet these RF exposure requirements and should be
avoided from use on the body. Use
only the supplied antenna or an approved antenna.
9 10
12F, A4, Nanshan Zhiyuan, 1001 Xueyuan Avenue, Nanshan Dist., ShenZhen ,PRC
This device complies with part 15 of the FCC rules. Operation is subject to the
following two conditions: ( 1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interfer-
ence that may cause undesired operation.
15.21 Information to the user.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
15.105 Information for the user.
Note: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with
theinstructions, may cause interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installa-
tion. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connecting the equipment to a socket on a circuit different from that to
which the receiver is connected.
- Contact with the provider or a radio TV technician for help. Specific
absorption rate (SAR):
This Tablet meets the government's requirements for exposure to radio
waves. The guidelines are based on standards developed by independent
scientific organizations through periodic and thorough evaluation of scientific
studies. The standards include a margin of safety designed to ensure the safety
of all people regardless of their age or health.
The FCC Statement of Exposure to RF and the SAR limit for the United States
(FCC) is 1.6 W/kg average for each gram of tissue. This device was tested for
typical operations of use on the body, with the back of the Tablet at 0mm
from the body. To maintain compliance with FCC RF exposure require-
ments, use accessories that maintain a distance of 0mm between the user's
body
and the back of the Tablet . The use of belt clips, covers and similar accessories
must not contain metallic components in their assembly. The use of accesso-
ries that do not meet these requirements may not meet FCC RF exposure
requirements and should be avoided.
Functioning in the body
This device was tested for typical operations of use in the body. To comply with
RF exposure requirements, a minimum separation distance of 0mm must be
maintained between the user's body and the telephone, including the
antenna. Third-party accessories such as belt clips. covers and similar
accessories used with this device should not contain metallic components,
accessories that do not meet these RF exposure requirements and should be
avoided from use on the body. Use
only the supplied antenna or an approved antenna.
9 10
12F, A4, Nanshan Zhiyuan, 1001 Xueyuan Avenue, Nanshan Dist., ShenZhen ,PRC
This device complies with part 15 of the FCC rules. Operation is subject to the
following two conditions: ( 1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interfer-
ence that may cause undesired operation.
15.21 Information to the user.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
15.105 Information for the user.
Note: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with
theinstructions, may cause interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installa-
tion. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connecting the equipment to a socket on a circuit different from that to
which the receiver is connected.
- Contact with the provider or a radio TV technician for help. Specific
absorption rate (SAR):
This Tablet meets the government's requirements for exposure to radio
waves. The guidelines are based on standards developed by independent
scientific organizations through periodic and thorough evaluation of scientific
studies. The standards include a margin of safety designed to ensure the safety
of all people regardless of their age or health.
The FCC Statement of Exposure to RF and the SAR limit for the United States
(FCC) is 1.6 W/kg average for each gram of tissue. This device was tested for
typical operations of use on the body, with the back of the Tablet at 0mm
from the body. To maintain compliance with FCC RF exposure require-
ments, use accessories that maintain a distance of 0mm between the user's
body
and the back of the Tablet . The use of belt clips, covers and similar accessories
must not contain metallic components in their assembly. The use of accesso-
ries that do not meet these requirements may not meet FCC RF exposure
requirements and should be avoided.
Functioning in the body
This device was tested for typical operations of use in the body. To comply with
RF exposure requirements, a minimum separation distance of 0mm must be
maintained between the user's body and the telephone, including the
antenna. Third-party accessories such as belt clips. covers and similar
accessories used with this device should not contain metallic components,
accessories that do not meet these RF exposure requirements and should be
avoided from use on the body. Use
only the supplied antenna or an approved antenna.
9 10
12F, A4, Nanshan Zhiyuan, 1001 Xueyuan Avenue, Nanshan Dist., ShenZhen ,PRC
This device complies with part 15 of the FCC rules. Operation is subject to the
following two conditions: ( 1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interfer-
ence that may cause undesired operation.
15.21 Information to the user.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
15.105 Information for the user.
Note: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with
theinstructions, may cause interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installa-
tion. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connecting the equipment to a socket on a circuit different from that to
which the receiver is connected.
- Contact with the provider or a radio TV technician for help. Specific
absorption rate (SAR):
This Tablet meets the government's requirements for exposure to radio
waves. The guidelines are based on standards developed by independent
scientific organizations through periodic and thorough evaluation of scientific
studies. The standards include a margin of safety designed to ensure the safety
of all people regardless of their age or health.
The FCC Statement of Exposure to RF and the SAR limit for the United States
(FCC) is 1.6 W/kg average for each gram of tissue. This device was tested for
typical operations of use on the body, with the back of the Tablet at 0mm
from the body. To maintain compliance with FCC RF exposure require-
ments, use accessories that maintain a distance of 0mm between the user's
body
and the back of the Tablet . The use of belt clips, covers and similar accessories
must not contain metallic components in their assembly. The use of accesso-
ries that do not meet these requirements may not meet FCC RF exposure
requirements and should be avoided.
Functioning in the body
This device was tested for typical operations of use in the body. To comply with
RF exposure requirements, a minimum separation distance of 0mm must be
maintained between the user's body and the telephone, including the
antenna. Third-party accessories such as belt clips. covers and similar
accessories used with this device should not contain metallic components,
accessories that do not meet these RF exposure requirements and should be
avoided from use on the body. Use
only the supplied antenna or an approved antenna.
9 10
12F, A4, Nanshan Zhiyuan, 1001 Xueyuan Avenue, Nanshan Dist., ShenZhen ,PRC
This device complies with part 15 of the FCC rules. Operation is subject to the
following two conditions: ( 1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interfer-
ence that may cause undesired operation.
15.21 Information to the user.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
15.105 Information for the user.
Note: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with
theinstructions, may cause interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installa-
tion. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connecting the equipment to a socket on a circuit different from that to
which the receiver is connected.
- Contact with the provider or a radio TV technician for help. Specific
absorption rate (SAR):
This Tablet meets the government's requirements for exposure to radio
waves. The guidelines are based on standards developed by independent
scientific organizations through periodic and thorough evaluation of scientific
studies. The standards include a margin of safety designed to ensure the safety
of all people regardless of their age or health.
The FCC Statement of Exposure to RF and the SAR limit for the United States
(FCC) is 1.6 W/kg average for each gram of tissue. This device was tested for
typical operations of use on the body, with the back of the Tablet at 0mm
from the body. To maintain compliance with FCC RF exposure require-
ments, use accessories that maintain a distance of 0mm between the user's
body
and the back of the Tablet . The use of belt clips, covers and similar accessories
must not contain metallic components in their assembly. The use of accesso-
ries that do not meet these requirements may not meet FCC RF exposure
requirements and should be avoided.
Functioning in the body
This device was tested for typical operations of use in the body. To comply with
RF exposure requirements, a minimum separation distance of 0mm must be
maintained between the user's body and the telephone, including the
antenna. Third-party accessories such as belt clips. covers and similar
accessories used with this device should not contain metallic components,
accessories that do not meet these RF exposure requirements and should be
avoided from use on the body. Use
only the supplied antenna or an approved antenna.
9 10
12F, A4, Nanshan Zhiyuan, 1001 Xueyuan Avenue, Nanshan Dist., ShenZhen ,PRC
This device complies with part 15 of the FCC rules. Operation is subject to the
following two conditions: ( 1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interfer-
ence that may cause undesired operation.
15.21 Information to the user.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
15.105 Information for the user.
Note: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with
theinstructions, may cause interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installa-
tion. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connecting the equipment to a socket on a circuit different from that to
which the receiver is connected.
- Contact with the provider or a radio TV technician for help. Specific
absorption rate (SAR):
This Tablet meets the government's requirements for exposure to radio
waves. The guidelines are based on standards developed by independent
scientific organizations through periodic and thorough evaluation of scientific
studies. The standards include a margin of safety designed to ensure the safety
of all people regardless of their age or health.
The FCC Statement of Exposure to RF and the SAR limit for the United States
(FCC) is 1.6 W/kg average for each gram of tissue. This device was tested for
typical operations of use on the body, with the back of the Tablet at 0mm
from the body. To maintain compliance with FCC RF exposure require-
ments, use accessories that maintain a distance of 0mm between the user's
body
and the back of the Tablet . The use of belt clips, covers and similar accessories
must not contain metallic components in their assembly. The use of accesso-
ries that do not meet these requirements may not meet FCC RF exposure
requirements and should be avoided.
Functioning in the body
This device was tested for typical operations of use in the body. To comply with
RF exposure requirements, a minimum separation distance of 0mm must be
maintained between the user's body and the telephone, including the
antenna. Third-party accessories such as belt clips. covers and similar
accessories used with this device should not contain metallic components,
accessories that do not meet these RF exposure requirements and should be
avoided from use on the body. Use
only the supplied antenna or an approved antenna.
9 10
12F, A4, Nanshan Zhiyuan, 1001 Xueyuan Avenue, Nanshan Dist., ShenZhen ,PRC
This device complies with part 15 of the FCC rules. Operation is subject to the
following two conditions: ( 1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interfer-
ence that may cause undesired operation.
15.21 Information to the user.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
15.105 Information for the user.
Note: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with
theinstructions, may cause interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installa-
tion. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connecting the equipment to a socket on a circuit different from that to
which the receiver is connected.
- Contact with the provider or a radio TV technician for help. Specific
absorption rate (SAR):
This Tablet meets the government's requirements for exposure to radio
waves. The guidelines are based on standards developed by independent
scientific organizations through periodic and thorough evaluation of scientific
studies. The standards include a margin of safety designed to ensure the safety
of all people regardless of their age or health.
The FCC Statement of Exposure to RF and the SAR limit for the United States
(FCC) is 1.6 W/kg average for each gram of tissue. This device was tested for
typical operations of use on the body, with the back of the Tablet at 0mm
from the body. To maintain compliance with FCC RF exposure require-
ments, use accessories that maintain a distance of 0mm between the user's
body
and the back of the Tablet . The use of belt clips, covers and similar accessories
must not contain metallic components in their assembly. The use of accesso-
ries that do not meet these requirements may not meet FCC RF exposure
requirements and should be avoided.
Functioning in the body
This device was tested for typical operations of use in the body. To comply with
RF exposure requirements, a minimum separation distance of 0mm must be
maintained between the user's body and the telephone, including the
antenna. Third-party accessories such as belt clips. covers and similar
accessories used with this device should not contain metallic components,
accessories that do not meet these RF exposure requirements and should be
avoided from use on the body. Use
only the supplied antenna or an approved antenna.
9 10
12F, A4, Nanshan Zhiyuan, 1001 Xueyuan Avenue, Nanshan Dist., ShenZhen ,PRC
This device complies with part 15 of the FCC rules. Operation is subject to the
following two conditions: ( 1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interfer-
ence that may cause undesired operation.
15.21 Information to the user.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
15.105 Information for the user.
Note: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with
theinstructions, may cause interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installa-
tion. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connecting the equipment to a socket on a circuit different from that to
which the receiver is connected.
- Contact with the provider or a radio TV technician for help. Specific
absorption rate (SAR):
This Tablet meets the government's requirements for exposure to radio
waves. The guidelines are based on standards developed by independent
scientific organizations through periodic and thorough evaluation of scientific
studies. The standards include a margin of safety designed to ensure the safety
of all people regardless of their age or health.
The FCC Statement of Exposure to RF and the SAR limit for the United States
(FCC) is 1.6 W/kg average for each gram of tissue. This device was tested for
typical operations of use on the body, with the back of the Tablet at 0mm
from the body. To maintain compliance with FCC RF exposure require-
ments, use accessories that maintain a distance of 0mm between the user's
body
and the back of the Tablet . The use of belt clips, covers and similar accessories
must not contain metallic components in their assembly. The use of accesso-
ries that do not meet these requirements may not meet FCC RF exposure
requirements and should be avoided.
Functioning in the body
This device was tested for typical operations of use in the body. To comply with
RF exposure requirements, a minimum separation distance of 0mm must be
maintained between the user's body and the telephone, including the
antenna. Third-party accessories such as belt clips. covers and similar
accessories used with this device should not contain metallic components,
accessories that do not meet these RF exposure requirements and should be
avoided from use on the body. Use
only the supplied antenna or an approved antenna.
9 10
