1 of 7
Owner’s Manual
Grant Park
6-Piece Folding Set - Table
Model Number: GP-6PC-24
SKU Number: 272-1199
2 of 7
Parts List – Grant Park Table
N0.
Illustration
Description
Qty.
N0.
Illustration
Description
Qty.
A
Tabletop
1
G
M6 Steel Washer
8
B
Table Legs
4
H
Allen Wrench
1
C
Center Ring with
Umbrella Hole
1
I
Hex Wrench
1
D
Center Ring
1
J
M6 Bolt Cover
8
E
M6 x 56mm Bolt
8
K
M6 Nut Cover
8
F
M6 Nut
8
3 of 7
Assembly Instructions
Grant Park Table
Note: For video instructions please visit:
https://insideout.store/video-assembly-instructions/
Important:
⚫ Read all the instructions before assembly. Failure to do so may result in faulty assembly and
potential injury.
⚫ Before assembling the product, remove all protective materials, hardware kit(s), and identify all
parts packed in the carton that are present. (Note: If any part is missing or damaged, do not attempt
to assemble). Contact InSide Out Customer Support. See page 7.
⚫ Assemble product on a soft and non-abrasive surface, such as carpet to avoid damaging the item.
⚫ Two people are required to assemble heavy items.
⚫ Do not tighten bolts until noted after each step.
Step 1: Place Tabletop (A) upside down on flat protected surface and insert Table Legs (B) into plastic
receivers in the table rim. See Figure 1.
Note: The Plastic Receivers in the Table Rim are adjustable for alignment.
Figure 1
B
B
B
B
A
4 of 7
Step 2: Loosely attach the four Table Legs (B) to the Center Ring (D) and Bottom Center Ring with
Umbrella Hole (C) with Bolts (E), Nuts (F), and Washers (G). See Figure 2.
Do not tighten the bolts at this moment. Check alignment for Top Center Ring (D) and
Bottom Center Ring with Umbrella Hole (C). Tighten all Bolts. Attach the Nut Covers (K) and
Bolt Covers (J).
Figure 2
Step 3: Carefully turn the Table over to the upright position. See Figure 3. Enjoy!
Note: Please see our video for additional assembly assistance:
https://insideout.store/video-assembly-instructions/
C
D
B
F
G
E
5 of 7
Parts List – Grant Park Umbrella
N0.
Illustration
Description
Qty.
N0.
Illustration
Description
Qty.
A
Umbrella
1
B
Umbrella Pole
1
6 of 7
Assembly Instructions
Grant Park Umbrella
Note: For video instructions please visit:
https://insideout.store/video-assembly-instructions/
Important:
⚫ Read all the instructions before assembly. Failure to do so may result in faulty assembly and
potential injury.
⚫ Before assembling the product, remove all protective materials, hardware kit(s), and identify all
parts packed in the carton that are present. (Note: If any part is missing or damaged, do not attempt
to assemble). Contact InSide Out Customer Support. See page 7.
⚫ Assemble product on a soft and non-abrasive surface, such as carpet to avoid damaging the item.
⚫ Two people are required to assemble heavy items.
WARNING: DO NOT USE UMBRELLA WITHOUT UMBRELLA BASE
Note: Umbrella ribs may be compressed from shipment. Place Umbrella (A) upside down and gently
shake to separate the Umbrella Ribs.
Step 1: Open the Lock on the lower umbrella pole (B) by raising the lever. Insert Umbrella (A) into the
lower Umbrella Pole (B). Lock the Umbrella into the Pole by lowering the lever. See Figure 1.
Figure 1
Note: Please see our video for additional assembly assistance:
https://insideout.store/video-assembly-instructions/
A
B
A
B
7 of 7
Maintenance & Care
Maintenance is required for all outdoor furniture and accessories. Inspect all hardware thoroughly before use
and during the season to make sure bolts are securely fastened. Use furniture covers or store out of the
elements when not in use. Failure to maintain the furniture will void warranty.
Frame: Clean frames with a mild soap and warm water. Do not use abrasive materials, cleaners or
bleach. Rinse with clean water and dry thoroughly.
Tabletop: Clean the tabletop with a soft cloth or sponge. Never use scouring creams, abrasive cleaners,
acid or petroleum-based products. Wash with warm water and dry thoroughly.
Fabric: Fabric may be cleaned by hand with a mild solution of soap and water. Rinse fabric thoroughly
and allow it to drip dry. Do not use bleach or solvents on fabrics.
Wicker: Clean the resin wicker with a soft cloth or sponge. Never use scouring creams, abrasive
cleaners, acid or petroleum-based products. Wash with warm water and dry thoroughly.
Warranty
LIMITED 1 YEAR WARRANTY: The manufacturer will replace any part found to be defective in material
or workmanship within 30 days of purchase date. The purchaser must contact the manufacturer’s customer
service department. After 30 days of purchase date the warranty is limited. The manufacturer, at its option,
will repair or replace the defective parts. Proof of purchase (dated register receipt) and photos are required
for all warranty claims. It remains the customer's responsibility to pay for freight and packaging charges to
and from the service center. The warranty is to the original purchaser and is non-transferable. Any
replacement or warranted items will be in the original style and color, or similar style and color if the original
is unavailable or has been discontinued. Please contact our Customer Service for assembly
assistance or replacement parts. Do not return to the store without authorization.
EXCLUSIONS: Furniture used for commercial, contract, or other non-residential purposes are excluded.
Damage due to acts of nature, misuse, improper assembly or maintenance is excluded. Glass breakage,
discoloration, fading, mildew, corrosion, and rusting are excluded.
LIABILITY: Inside Out Intl LLC and Retailer disclaim any and all liability for personal injury, property
damage or loss resulting from incorrect attachment, improper use, inadequate maintenance, unapproved
modification, or neglect of this product.
Customer Service Contact Information
Hours: Monday - Friday 8:00 a.m. - 5:00 p.m. Central Time (CT)
Phone: 1-888-607-4417
Email: servi[email protected]t
