SOLHEEL SLIM THERMAL
Model: R-WMF05
USER MANUAL
READ ALL INSTRUCTIONS BEFORE USING.
1.This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a
person responsible for their safety.
2. Children should be supervised to ensure that they do not play with
the appliance.
3. WARNING – To reduce the risk of burns, re, electric shock, or injury
to persons.
a) This appliance should never be left unattended when plugged in.
Unplug from outlet when not in use, and before putting on or
taking o parts.
b) Do not operate under blanket or pillow. Excessive heating can
occur and cause re, electric shock, or injury to persons.
c) Close supervision is necessary when this appliance is used by, on, or
near children, invalids, or disabled persons.
d) Use this appliance only for its intended use as described in this
manual. Do not use attachments not recommended by the
manufacturer.
e) Never operate this appliance if it has a damaged cord or plug, if it is
not working properly, if it has been dropped or damaged, or
dropped into water.
f) Do not carry this appliance by supply cord or use cord as a handle.
g) Keep the cord away from heated surfaces.
h) Never operate the appliance with the air openings blocked. Keep
the air openings free of lint, hair, etc..
i) Never drop or insert any object into any opening.
IMPORTANT SAFETY
INSTRUCTIONS
j) Do not use the appliance outdoors.
K) Do not operate where aerosol (spray) products are being used or
where oxygen is being administered.
l) To disconnect, turn all controls to the o position, then remove plug
from outlet.
4. The appliance is only to be used with the power supply unit
provided with the appliance.
5. The appliance has a heated surface. Persons insensitive to heat
must be careful when using the appliance.
6. WARNING: Use heated surfaces carefully. May cause serious burns.
Do not use overinsensitive skin areas or in the presence of poor
circulation. The unattended use of heat by children or
incapacitated persons may be dangerous.
7. WARNING: Do not stand on the appliance. Use only while seated.
8. The appliance is intended for household use only and not intended
for medical use. It should not be used in treatment or alleviation of
disease or abnormal physical state.
SAVE THESE INSTRUCTIONS
01
READ ALL INSTRUCTIONS BEFORE USING.
1.This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a
person responsible for their safety.
2. Children should be supervised to ensure that they do not play with
the appliance.
3. WARNING – To reduce the risk of burns, re, electric shock, or injury
to persons.
a) This appliance should never be left unattended when plugged in.
Unplug from outlet when not in use, and before putting on or
taking o parts.
b) Do not operate under blanket or pillow. Excessive heating can
occur and cause re, electric shock, or injury to persons.
c) Close supervision is necessary when this appliance is used by, on, or
near children, invalids, or disabled persons.
d) Use this appliance only for its intended use as described in this
manual. Do not use attachments not recommended by the
manufacturer.
e) Never operate this appliance if it has a damaged cord or plug, if it is
not working properly, if it has been dropped or damaged, or
dropped into water.
f) Do not carry this appliance by supply cord or use cord as a handle.
g) Keep the cord away from heated surfaces.
h) Never operate the appliance with the air openings blocked. Keep
the air openings free of lint, hair, etc..
i) Never drop or insert any object into any opening.
j) Do not use the appliance outdoors.
K) Do not operate where aerosol (spray) products are being used or
where oxygen is being administered.
l) To disconnect, turn all controls to the o position, then remove plug
from outlet.
4. The appliance is only to be used with the power supply unit
provided with the appliance.
5. The appliance has a heated surface. Persons insensitive to heat
must be careful when using the appliance.
6. WARNING: Use heated surfaces carefully. May cause serious burns.
Do not use overinsensitive skin areas or in the presence of poor
circulation. The unattended use of heat by children or
incapacitated persons may be dangerous.
7. WARNING: Do not stand on the appliance. Use only while seated.
8. The appliance is intended for household use only and not intended
for medical use. It should not be used in treatment or alleviation of
disease or abnormal physical state.
SAVE THESE INSTRUCTIONS
02
WHAT’S IN THE BOX
ABOUT THE PRODUCT
Foot Massager × 1
Power Adapter × 1
2.Product Overview
03
1.Specications
Product Name: Foot Massager
Model: R-WMF05
Input: 12V 2A
Rated Power: 24W
Power Cord Length: 5.9 ft / 1.8 m
Applicable Foot Size: Up to 14 (US) / 48 (EU)
Product Weight: 3.3 lb / 1.5 kg
Product Size: 14.7 × 12.7 × 7.1 in / 360 × 322 × 180 mm
Footbed
USING THE PRODUCT
*Do not use the appliance for more than 30 mins each time.
*Do not stand up while massaging.
1. Connect the appliance to the power adapter and plug it into a
power outlet. Once the appliance is plugged in, the power
indicator will ash white, indicating that it is on standby mode.
2. Use the Control Panel to operate the appliance.
3. The appliance must be used with the power adapter provided.
04
Power
Indicator
Power Port
Kneading
Speed Button
Power /
Timer Button
Heat Button
Heating:
Only for the toes
Kneading:
Only for the arches
and heels
Button Instructions
Note:
1. Unplug the appliance after each use.
2. This appliance has two functions: kneading and heating. Each
function can be used separately or combined.
Press and hold to turn ON / OFF the appliance.
Press to cycle through 15 min (solid white) / 30 min (solid
red).
Press to turn ON / OFF the heat for the toes.
Press and hold to cycle through kneading directions: turn
outward and turn inward.
Press to cycle through kneading speeds: low, high and o.
Note: 1. When turn on / o the appliance, it will emit a
prolonged beep.
2. When turning on the appliance, Heat (On), Kneading
Speed (Low), Kneading Direction (Turn Outward), and Timer
(15 Min) will be activated by default.
Button
Operation
05
TROUBLESHOOTING GUIDE
Problem
The appliance does
not work.
Insucient heat or
no heat.
1. Disconnected power or
loose plug causing
poor contact.
2. Not using the supplied
power adapter.
2. Use the power adapter
provided with the
appliance.
3. The massage nodes do
not work due to the
excessive pressure
applied to the
massage nodes.
3. When using the
appliance, sit down
and place your feet on
it, rather than standing
on it and applying
excessive pressure.
1. Plug in and secure the
power source and turn
on the device again.
Cause Solution
06
1. The heat function was
turned o during the
operation.
1. Press the button to
turn on the heat.
2. The appliance takes
time to heat up
gradually.
2. Wait several minutes
after turning on the
heat.
3. The toes do not touch
the heated area of the
appliance.
3. Move your feet position
forward until your toes
touch the heated area.
CLEANING & MAINTENANCE
1. Use a soft, dry cloth to wipe the appliance. Do not use corrosive
cleaning agents like benzene or thinner to clean the appliance.
2. Avoid spraying water on the appliance or immersing it in any type
of liquid.
3. When this appliance is not being used, store it in a cool and dry
location. Do not store near intense heat or an open ame.
4. Do not leave the appliance in direct sunlight for prolonged periods
of time.
5. Do not attempt to disassemble or reassemble the appliance.
6. Do not use sharp objects (such as knives) as those can damage the
appliance.
07
Insucient heat or
no heat.
4. Thicker socks were
worn, which aects the
transfer of heat.
4. Wear thinner socks
during massage. Or use
your hand to check the
heating area to conrm
the heat is enabled
properly.
The appliance shut
o suddenly.
1. The plug is loose,
causing poor contact.
1. Plug in and secure the
power adapter, then turn
on the appliance again.
2. The timer ran out. 2. Restart the appliance for
another session.
Problem
Cause Solution
08
Your RENPHO product purchase is covered by a one-year limited
manufacturer warranty from the date of delivery.
For warranty terms and conditions, please visit:
https://renpho.com/pages/warranty-terms-and-conditions
Note: Product registration is not required for the warranty.
If you choose not to register your product, it will not diminish the
product warranty.
Please feel free to contact us if you have any questions or concerns.
RENPHO Customer Service Team guarantees a quick response and
hassle-free solutions to any issue you may have within business hours.
*For defective products or the return of items, please contact us with
your order number within the specied warranty period. DO NOT
dispose of any product parts as they may be required for inspection/re-
pair.
WARRANTY POLICY
CUSTOMER SERVICE
TEL: +1(844) 417 0149 (US&CA)
Monday-Friday 9:00AM-4:30PM
1800 MY RENPHO (1800 69 7367) (AU ONLY)
Monday-Friday 9:00AM-6:00PM (AEST)
+44(0)7434 666088 (UK ONLY)
Monday-Friday 9:00AM-5:00PM (GMT)
Email: [email protected] (US&CA)
support-au@renpho.com (AU)
[email protected] (UK&EU)
09
Hereby, Shenzhen Ruiyi Business Technology Co., Ltd. declares that
this equipment complies with Directive 2014/30/EU, Directive
2014/35/EU, Directive 2011/65/EU, The Electrical Equipment
(Safety) Regulations 2016, The Electromagnetic Compatibility
Regulations 2016, Restriction of the Use of Certain Hazardous
Substances in Electrical and Electronic Equipment Regulations
2012, and other relevant provisions. The full text of the Declaration
of Conformity can be obtained at the following internet address:
https://renpho.eu/pages/compliance-data
The crossed-out wheeled bin symbol means that you are legally
obliged to dispose of these appliances separately from unsorted
municipal waste, i.e. old appliances must be disposed of separately
from household waste. Batteries or rechargeable batteries that are
not permanently installed must be removed beforehand and
disposed of separately.
2. Options for returning old appliances
Owners of WEEE can return or collect it within the framework of the
possibilities set up and available by public waste management authorities to
ensure proper disposal.
1. Meaning of the crossed-out wheeled bin symbol
10
FCC Regulatory Compliance
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
Warning: changes or modications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment o and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit dierent from that to which the
receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
ISED Regulatory Compliance
This device contains licence-exempt transmitter(s)/receiver(s) that comply with
Innovation, Science and Economic Development Canada’s licence-exempt RSS(s).
Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause
undesired operation of the device.
L'émetteur/récepteur exempt de licence contenu dans le présent appareil est
conforme aux CNR d'Innovation, Sciences et Développement économique Canada
applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux
deux conditions suivantes :
(1) L'appareil ne doit pas produire de brouillage;
(2) L'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage
est susceptible d'en compromettre le fonctionnement.
NA1
Made in China
尺寸：98x135
128g铜版纸，黑白印刷，封面过哑油，骑马订
此页不印刷
