Flat Panel
LCD Television
LC-55TD5
En
Read all of these instructions carefully before using this television.
Keep these instructions in a safe place for future reference.
S E R I E S
Instruction Manual
All manuals and user guides at all-guides.com
all-guides.com
All manuals and user guides at all-guides.com
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to
alert the user to the presence of un-insulated dangerous voltage within the products
enclosure that may be of sufficient magnitude to constitute a risk of electric to persons.
The exclamation point within an equilateral triangle is interded to
aler the user to the
presence of important operating and maintenance (servicing) instruction the literature
accompanying the appliance.
CAUTION: USE OF ANY CONTROLS, ADJUSTMENTS, OR PROCEDURES OTHER THAN
THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
CAUTION: These servicing instructions are for use by qualified service personnel only. To reduce
the risk of electric shock, do not perform any servicing other than that contained in the operating
instructions unless you are qualified to do so.
Refer to service manual for servicing instructions.
Important Safety Instructions
Note:
1.Read these instructions.
2.Keep these instructions.
3.Heed all warnings.
4.Follow all instructions.
5.Do not use near water.
6.Clean only with dry cloth.
7.Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
8.Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including
amplifiers) that produce heat.
9.Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has
two blades with one wider than the other. A grounding type plug has two blades and a third
grounding prong. The wide blade or the third prong are
provided for your safety. If the provided
plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
2
IMPORTANT INFORMATION
English
All manuals and user guides at all-guides.com
10.Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
11.Only use attachments / accessories specified by the manufacturer.
12.Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold
with the apparatus.
When a cart is used, use caution when moving the cart / apparatus combination to avoid injury from tip-over.
13.Unplug this apparatus during lightning storms or when unused for long periods of time.
14.Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any
way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain
or moisture, does not operate normally, or has been dropped.
15
.Apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, suchas vases, shall be
placed on the apparatus.
16.WARNING:To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
17.Mains plug or appliance coupler is used
as the disconnect device, shall be readily operable.
3
IMPORTANT INFORMATION
English
All manuals and user guides at all-guides.com
Screws:9xMB5X10
All manuals and user guides at all-guides.com
If
the Westinghouse Customer Service.
is
All manuals and user guides at all-guides.com
all-guides.com
6
Keep the TV dry and away from humidity.
Keep the TV away from heat sources
.
Unplug the TV before cleaning it. Do not use solvent or liquid to clean
the TV.
Only clean the TV with a soft and dry cloth.
In case of troubleshooting, do not use spare parts other than those
suggested by
the manufacturer. Using inadequate spare parts can
lead to electric shocks, short-circuits, fire or other incidents.
Unplug the TV during lightning storms or when unused for long periods
of time.
English
SAFETY PRECAUTIONS
All manuals and user guides at all-guides.com
CONTENTS
CONTENTS
PICTURE SOUND SLEEP DISPLAY
INPUT
VOL+
VOL-
EXIT
MUTE
MENU
OK
ENTER
CH+
CH-
1 2 3
4 5 6
7 8 9
0
FAV
CC
ASPECT
MTS
All manuals and user guides at all-guides.com
INPUT
Blue when TV is powered on.
POWER
SWITCH
USB
(SERVICE)
TUNER
TUNER
OVERVIEW
6. OVERVIEW
Red when TV is powered off. No color when power switch
is turned off.
(Shared audio with AV IN)
AC IN and POWER SWITCH
All manuals and user guides at all-guides.com
TUNER
into AC IN
Make sure the power switch is turned on, which is located at the back of the TV.
below.
All manuals and user guides at all-guides.com
TUNER
INPUT
TV
INPUT
All manuals and user guides at all-guides.com
all-guides.com
TUNER
TUNER
TV
TV PC
the INPUT
All manuals and user guides at all-guides.com
USB
(SERVICE)
TUNER
USB
(SERVICE)
TUNER
All manuals and user guides at all-guides.com
PICTURE SOUND SLEEP DISPLAY
INPUT
VOL+
VOL-
EXIT
MUTE
MENU
OK
ENTER
CH+
CH-
1 2 3
4 5 6
7 8 9
0
FAV
CC
ASPECT
MTS
INPUT
INPUT
PICTURE
Select the picture mode
SOUND
Select the sound mode
SLEEP
Set the Sleep Timer.
Displays
Displays
set
All manuals and user guides at all-guides.com
All manuals and user guides at all-guides.com
MENU OPERATION
, then press
Use the Left and Right arrow to select your time zone. Use
Down arrow to select Next, then press Enter.
Use Up and Down arrows to select channel scan source, then
press Enter.
Please follow the Setup Wizard to scan and store channels.
You can perform the scan later if you choose to skip.
To scan now, press Enter.
Enter.
Time Zone
Time Zone
All manuals and user guides at all-guides.com
all-guides.com
Use Up and Down arrows to select channel scan source, then
press Enter.
Are you Using a Cable/Satellite Box to connect your TV?
Use the Left and Right arrows to select the input source of
your cable/satellite box. Use Down arrow to select Next,
then press Enter.
RF (TV Tuner input) is not recommended due to its poor
quality analog signal. Use Down arrow to select Back
and choose a higher quality input source. If you do not have
a high definition output, contact your cable/satellite provider
for additional information. Or, press Enter to proceed.
Use Up and Down arrows to make selection, then press Enter.
All manuals and user guides at all-guides.com
INPUT
All manuals and user guides at all-guides.com
OK
For TV Mode:
All manuals and user guides at all-guides.com
19
Auto Wid e
Press ▼/▲button to select the item Auto Wide, then press ENTER button to adjust. It can set the
picture to fit the screen automatically. When the Auto Wide is selected, the symbol will show as:
English
MENU OPERATION
1.Press ENTER when the Screen Settings item is highlighted. Then you will go to the sub-menu
as following.
2.Press to select the desired menu item. Press ENTER to proceed if necessary▼/▲.
3.Press ◄/► to adjust the item to the desired level.
4.When you have changed the settings, you
can exit from the menu by pressing MENU.
Screen Size
Press ▼/▲ button to select Screen Size, then press ◄/► button to adjust. Available Screen Size:
Standard, Fill, Over, Scan.
Screen Settings
Screen Size Standard
Auto Wide
SCREEN SETTINGS
MENU
:Return
:Select Menu
:Change Setting
Sharpness
27
Tint
27
Sharpness
Tint
Press ▼/▲ button to select Sharpness,
then press ◄/► button to adjust.
Press ▼/▲ button to select Tint,
then press ◄/► button to adjust.
Screen Size(N/A) Standard
Auto Wide
SCREEN SETTINGS
MENU
:Return
:Select Menu :Enable/Disable
ENTER
Color
27
Color
Press ▼/▲ button to select Color,
then press ◄/► button to adjust.
All manuals and user guides at all-guides.com
120 Hz
120 Hz
120 Hz
120 Hz
120 Hz
All manuals and user guides at all-guides.com
all-guides.com
21
Bass
Treble
Balance
Press ▼/▲ button to select the item Bass, then press ◄/► button to adjust.
Press ▼/▲ button to select the item Treble, then press ◄/► button to adjust.
Press ▼/▲ button to select the item Balance, then press ◄/► button to adjust.
English
MENU OPERATION
SOUND SETTING
Sound Mode User
Bass
Treble
Balance
MENU
:Return
:Select Menu
:Change Setting
1.Press ENTER when the Sound Settings item is high lighted. Then you will go to the sub-menu as
following.
2.Press ▼/▲ to select the desired menu item. Press ENTER to proceed if necessary.
3.Press ◄/► to the desired level.
4.When you have changed the settings, you can exit from
the menu by pressing MENU.
Sound Mode
Press ▼/▲button to select the item Sound Mode, then press ◄/► button to adjust. Only in the
User mode, the detail optionsas following can be adjusted. Available Sound Mode: User, Dynamic,
Standard, Soft.
Sound Settings
SOUND
Sound Settings
Surround Mode
Analog Sound Stereo
Digital Sound English
Other Settings
Equalizer Settings
MENU
ENTER
:Return
:Select Menu :Go to Next Menu
SOUND MENU
All manuals and user guides at all-guides.com
22
OTHER SETTINGS
AVL Off
Sepeaker On
Digital Audio Output Dolby Digital
MENU
:Return
:Select Menu :Enable/Disable
Other Settings
English
MENU OPERATION
Surround Mode
Analog Sound
Digital Sound
Surround Mode
Press ▼/▲ button to select the item Surround Mode, then press OK button to adjust. It can set
the picture to fit the screen automatically. When the Auto Wide is selected, the symbol will show as
following:
Press ▼/▲ button to select the item Preferred Analog Sound, then press ◄/► button
to select
the prefer audio when switching to an analog channel. Available Analog Sound: Stereo, Mono,SAP.
Press ▼/▲ button to select the item Preferred Digital Sound , then press ◄/► button to select
the prefer audio when switching to a digital channel. Available Digital Sound: English, French,
Spanish.
Bass
7
Treble
7
Balance
7
All manuals and user guides at all-guides.com
23
Note: This menu is only shown when the input source is TV.
CHANNEL
Channel List
Favorite List
Channel Setting
Signal Type Air
Auto Channel Search Enter
:Return
:Select Menu :Go to Next Menu
MENU
CHANNEL MENU
English
MENU OPERATION
EQUALIZER SETTINGS
Mode OFF
100
0(N/A)
250 500 1K 2K
4K
10K
:Return
:Select Menu :Change Setting
MENU
Equalizer Settings
Equalizer Mode
Press ▼/▲ button to select the item Equalizer Mode, then press ◄/► button to select the desired
mode. Available Equalizer Mode: OFF, ROCK, POP, JAZZ, User.
0(N/A) 0(N/A) 0(N/A) 0(N/A) 0(N/A) 0(N/A)
AVL
Speaker
Digital Audio Output
Press ▼/▲ button to select the item AVL, then press ◄/► button to select ON or OFF. Auto
Volume Level can set the volume automatically adjust corresponding to the input audio.
Press ▼/▲ button to select the item Speaker, then press ◄/► button to select ON or OFF. If set
to Off, the speaker will be mute.
Press ▼/▲ button to select the item Digital Audio Output, then press ◄/► button to select the
desired digital audio output. Available digital audio output: Dolby Digital, Off, PCM.
All manuals and user guides at all-guides.com
Press ▼/▲ button to select Manual Channel Setting, then press OK button to set the value in the
sub menu.
24
CHANNEL SETTING
No Channels Present
Please Perform Channel Search First
:Return
:Select Menu
:Select Cha nnel
MENU
Channel Setting
Press ▼/▲ button to select Signal Type, then press ◄/► button to select the type you want to set.
There are two selections: Air and Cable.
Signal Type
English
MENU OPERATION
FAVORITE LIST
Page 1/1
No Favorite Channels Present
Please Perform Favorite Channel Add First
:Return
:Select Menu
:Page
:Select Cha nnel
MENU
ENTER
Press ▼/▲ button to select Favorite List, then press OK button to scan the Favorite Channel List.
Favorite List
Channel List
No Channels Present
Please Perform Channel Search First
Page 1/1
:Return
:Select Menu
:Page
:Select Cha nnel
MENU
ENTER
Press ▼/▲ button to select Channel List, then press OK button to scan the Channel List. If you
select the option “In Channel List” On, the channel label will display in the list.
Channel List
All manuals and user guides at all-guides.com
25
PARENTAL CONTROL
Lock Parental Control
V-CHIP(N/A)
Change Password(N/A)
Pront
Panel Lock(N/A)
:Return
:Enter password
MENU
Input password to enter,default password is‘‘0000’’.
Source Lock(N/A)
DIGITAL
PARENTAL CONTROL
PARENTAL CONTROL
Lock Parental Control(N/A)
V-CHIP
Change Password
Front
Panel Lock
Source
Lock
V-CHIP
US V-Chip
Canada V-Chip
Block UnRated Show
Downloadable Rating(N/A)
Clear Downloadable Date(N/A)
MENU
ENTER
:Return
:Select Menu :Go to Next Menu
Press ▼/▲ button to select V-CHIP, then press OK button to adjust. A sub menu will appear
as below.
V-CHIP
English
MENU OPERATION
AUTO CHANNEL SEARCH-Air
Now Searching...Please Wait...
Return
Analog Channels Found: 0
Digital Channels Found: 0
92%
Press ▼/▲ button to select Auto Channel Search, then press OK button to search channel.
A Channel Search Menu will appear as below.
Auto Channel Search
MENU
ENTER
:Return
:Select Menu :Go to Next Menu
All manuals and user guides at all-guides.com
all-guides.com
26
Movie Rating
G
PG
PG-13
R
NC-17
X
:Select
:Lock/Unlock
ENTER
Press ▼/▲ button to select Movie Rating, then press OK button to adjust. A sub menu will appear
as below.
Movie Rating
TV Rating
D L S V FV
TV-Y
TV-Y7
TV-G
TV-PG
TV-14
TV-MA
:Select
:Lock/Unlock
ENTER
Press ▼/▲ button to select Rating, then press OK button to lock.
Press ▼/▲ button to select TV Rating, then press OK button to adjust. A sub menu will appear
as below.
TV Rating
Press ▼/▲/◄/► button to select Rating, then press OK button to lock.
English
MENU OPERATION
USA
Movie Rating
TV Rating
MENU
ENTER
:Return
:Select Menu
:Go to Next Menu
Press ▼/▲ button to select US V-CHIP, then press OK button to adjust. A sub menu will appear
as below.
US V-CHIP
All manuals and user guides at all-guides.com
27
French Rating
G
8ans
+
13ans+
16ans+
18ans+
:Select
:Lock/Unlock
ENTER
MENU
:Return
Block UnRated Show
Downloadable Rating
Clear Downloadable Date
The operation of CANADA V-CHIP is the same as the operation of US V-CHIP.
Press ◄ / ► button to select Block UnRated Show, then press OK button to set the rating locked.
Press ▼ / ▲ button to select Downloadable Rating, then press OK
button to set the rating.
If the DTV program doesn’t have this rating information, this option will be in gray.
Press ▼ / ▲ button to select Clear Downloadable Data, then press OK button to set the rating.
Note: The above two operation only valid when playing the downloadable data stream.
The
operations are the same as US V-CHIP.
Press ▼ / ▲ button to select Change Password, then press OK button to adjust the value.
A Sub Menu Will appear as below. If the password is changed, all of the passwords in the menu will
be changed at the same time.
CHANGE PASSWORD
English
MENU OPERATION
CANADA
English Rating
French Rating
:Return
:Select Menu :Go to Next Menu
MENU
ENTER
Press ▼/▲ button to select US V-CHIP, then press OK button to adjust. A sub menu will appear
as below.
English Rating
C
C8
+
G
PG
14+
:Select
:Lock/Unlock
ENTER
MENU
:Return
18
+
CANADA V-CHIP
All manuals and user guides at all-guides.com
28
Source Lock
Page1/2
TV
AV
YPbPr1
YPbPr2
HDMI1
HDMI2
:Return
:Select
:Page
:On/Off
MENU
ENTER
Press ▼/▲ button to select Source Lock, then press OK button to enter the sub menu.
Press ▼/▲ button to select Source, then press OK button to set the Source Lock .
You can’t enter the locked source if you set the Source lock.
HDMI3
Source Lock
SETUP
Closed Caption
Menu Language English
CLOCK
:Return
:Select Menu :Go to Next Menu
MENU
ENTER
Setup Menu
English
MENU OPERATION
Note: If you forget your password, you can use “1470” to enter any menu locked.
Change Password
Old PIN
New PIN(N/A)
Confirm(N/A)
:Return
:Password
ENTER
D IGITAL
All manuals and user guides at all-guides.com
29
Caption Display
Analog Caption Type
Digital Caption Type
Digital CC Preset
Digital CC Style
Press ▼/▲ button to select Caption Display, then press ◄/► button to select ON or OFF.
Press ▼/▲ button to select Analog Caption Type, then press ◄/► button to select the type.
Available type: CC1, CC2, CC3, CC4,
TEXT1, TEXT2, TEXT3, TEXT4.
Press ▼/▲ button to select Digital Caption Type, then press ◄/► button to select the type.
Available type: Service1~6.
Press ▼/▲ button to select Digital CC Preset, then press ◄/► button to select Default or Custom.
This menu is only shown when the Digital CC Preset is selected Custom.
DIGITAL CC STYLE
CC Size Default
CC Font
CC Opacity
Text Color
CC Background Opacity
CC Background Color
CLOSE CAPTION
:Return
:Select Menu
MENU
:Change Setting
Default
Default
Default
Default
Default
English
MENU OPERATION
Press ▼/▲ button to select the item Closed Caption, then press ◄/► button to adjust.
CLOSED CAPTION
Caption Display
Analog Caption Type
Digital Caption Type
Digital CC Preset
Digital CC Style(N/A)
Off
CC1
Service1
Custom
:Return
:Select Menu
MENU
:On/Off
Closed Caption
All manuals and user guides at all-guides.com
30
Press ▼/▲ button to select the item Menu Language, then press ◄/► button to adjust.
Available Language: English, French, Spanish.
CLOCK
Tim e Zone Alaska
Auto Clock Off
Setup Tim e 2009-10-21 20:00:00
Day Of Wee k( N/ A) Tue(N/A)
:Change Setting:Select Menu
Press ▼/▲ button to select the Clock, then press OK to edit.
Menu Language
Clock
Tim e Zone
Auto Clock
Setup Ti me
Day Of We ek
Press ▼/▲ button to select Timer Zone, then press ◄/► button to set. Available Size: Central,
Mountain, Pacific, Alaska, Hawaii, Samoa, Newfoundland, Atlantic, Eastern.
Press ▼/▲ button to select Auto Clock, then press ◄/► button to set it On or Off. If you set
it On,
it will adjust the time corresponding the DTV time automatically.
Press ▼/▲ button to select Setup Time, then press ◄/► button to adjust the time and use the
ENTER button to go to the next option.
This option displays the Day Of Week corresponding to the setup time.
English
MENU OPERATION
CC Opacity
Text Color
CC Background Opacity
CC Background Color
Press ▼/▲ button to select CC Opacity, then press ◄/► button to select the Opacity.
Available Opacity: Default, Solid, Flashing, Translucent, Transparent.
Press ▼/▲ button to select Text Color, then press ◄/► button to select the color.
Available Color: Default, Black, White, Red, Green,
Blue, Yellow, Magenta, Cyan.
Press ▼/▲ button to select CC Background Opacity, then press ◄/► button to select the Opacity.
Available Opacity: Default, Solid, Flashing, Translucent, Transparent.
Press ▼/▲ button to select CC Background Color, then press ◄/► button to select the Color.
Available Color: Default, Black, White, Red, Green, Blue, Yellow, Magenta,
Cyan.
CC Size
CC Font
Press ▼/▲ but ton to select CC Size, then press ◄/► but ton to set . Avai labl e Si ze: Defaul t, Small,
Standar d, Lar ge.
Press ▼/▲ but ton to sel ect , then press ◄/► but ton to sel ect the Font. Avai labl e type: Defaul t, Styl e0~7 .
All manuals and user guides at all-guides.com
all-guides.com
Enter the Reset password “0000”,
For
Modes:
All manuals and user guides at all-guides.com
32
PICTURE SETTINGS
Picture Mode User
Brightness
Contrast
Color
Tint
Sharpness
:Return
:Select Menu :Change Setting
MENU
Picture Mode
Brightness
Brightness
25
1.Press ENTER when the Picture Settings item is highlighted. Then you will go to the sub-menu as
following.
2.Press ▼/▲ to select the desired menu item. Press ENTER to proceed if necessary.
3.Press◄/► to adjust the item to the desired level.
4.When you have changed the settings, you can
exit from the menu by pressing MENU.
Press ▼/▲ button to select Picture Mode, then press ◄/► button to adjust.
Available picture mode: Movie, User, Dynamic, Standard.
Press ▼/▲ button to select Brightness,
then press ◄/► button to adjust.
Picture Settings
English
MENU OPERATION
PICTURE MENU
MENU
Color Temperature Normal
Advanced Picture Settings(N/A)
Picture Settings
Screen Settings
PC Settings
PICTURE
ENTER
:Return
:Select Menu
:Go to Next Menu
All manuals and user guides at all-guides.com
33
SCREEN SETTINGS
Screen Size Standard
Auto Wide( N/A)
:Return
:Select Menu
:Change Setting
MENU
Screen Size
Auto Wid e
1.Press ENTER when the Screen Settings item is highlighted. Then you will go to the sub-menu as
following.
2.Press▼/▲ to select the desired menu item. Press ENTER to proceed if necessary.
3.Press ◄/► to adjust the item to the desired level.
4.When you have changed the settings,
you can exit from the menu by pressing MENU.
Press ▼/▲ button to select Screen Size, then press ◄/► button to adjust. Available Screen Size:
Standard.
Auto Wide item is invalid in PC source.
1.Press ENTER when the PC Settings item is highlighted. Then you will go the sub-menu as following.
2.Press
▼/▲to select the desired menu item. Press ENTER to proceed if necessary .
3.Press ◄/► to adjust the item to the desired level.
4.When you have changed the settings, you can exit from the menu by pressing MENU.
Screen Settings
PC Setting
English
MENU OPERATION
Color
27
Sharpness
27
Color
Sharpness
Tint
Press ▼/▲ button to select Colort,
then press ◄/► button to adjust.
Press ▼/▲ button to select Sharpness,
then press ◄/► button to adjust.
This option can not be adjusted.
Contrast
Contrast
25
Press ▼/▲ button to select Contrast,
then press ◄/► button to adjust.
All manuals and user guides at all-guides.com
34
Auto Adjust
Horizontal Position
Vertical Position
Clock
Phase
Reset
Horizontal Position
25
Vertical Position
25
Clock
25
Phase
25
Press ▼/▲ button to select Auto Adjust, then press OK button to start auto adjusting.
Press ▼/▲ button to select Horizontal Position,
then press ◄/► button to adjust.
Press ▼/▲ button to select Vertical Position,
then press◄/► button toadjust.
Press ▼/▲ button to select Clock, then press
◄/► button to adjust.
Press ▼/▲
button to select Phase, then press
◄/► button to adjust.
Press ▼/▲ button to select Reset, then press
OK button to reset the options above.
1.SOUND menu and description are the same as that for TV.
but the settings for Analog Sound and Digital Sound are invalid in PC source.
2.PARENTAL menu and descriptions are the same as that for TV source.
3.SETUP menu and description are the same as that for TV source.
But the setting for Closed Caption is invalid in PC source.
4.OTHER menu and description are the same as that for TV source.
5.CHANNEL menu and description are invalid in PC source.
Note: The operation and description of the hot key is programmable on your
remote control.
English
MENU OPERATION
PC SETTINGS
Auto Adjust Enter
Horizontal Position
Vertical Position
Clock
Phase
Reset Enter
:Return
:Select Menu :Press To Enter
MENU ENTER
All manuals and user guides at all-guides.com
35
Please check if you can solve problems by troubleshooting yourself.
Control
Troubleshooting
No signal
No color shades
Stain on the
screen
Double or multiple
display image
Snow on the screen
The remote control
does not work
"Zip" made noise on
TV cover
No sound
Please check that all cables are correctly plugged in.
Adjust the contrast, the color and the brightness.
May be the result from a lighting
signal from car, motor, neon light
and other electrical devices or appliances.
May be the result of an electrical wave disturb from other TV,
Computer and Game machine or Radio.
The cables of the antenna are not correctly plugged in.
Please check the batteries order and alignment. Check that the IR
of
the remote control is not hidden by something.
Even if the display image is correct, the noise may come from an
unsteady fixation of the panel.
Make sure that you have not press the MUTE button of the panel
or of the remote control.
10. Troubleshooting
English
TROUBLESHOOTING
All manuals and user guides at all-guides.com
all-guides.com
260
42.3
TUNER
1320 x 300 x 916 mm
1320 x 114 x 876 mm
w /
w / o
49.86
55
-
-
All manuals and user guides at all-guides.com
All manuals and user guides at all-guides.com
All manuals and user guides at all-guides.com
© 2010 Seiki Digital Inc. All rights reserved. Printed in China
www.seikiworld.com
All manuals and user guides at all-guides.com
