XR7100
XR7200
Use and Care Guide
IMPORTANT SAFETY
INSTRUCTIONS
When using an electrical appliance, basic precautions should always
be observed, including the following. Please read all instructions
before using this shaver.
WARNINGS
To reduce the risk of burns, fire, electric shock, or injury to persons:
• Do not reach for the appliance if it has fallen into water while
plugged into the power source. Unplug from the power source at
the wall immediately.
• Shaver may be rinsed under water or used in the shower, but
never use the USB charging cable in the shower.
• Detach the shaver and USB cable from the power source before
cleaning.
• When recharging, place in a safe position, out of the reach of
children and pets.
• Close supervision is necessary when this appliance is used by,
on, or near children or individuals with certain disabilities or
special needs.
• Use this appliance only for its intended use as described in this
manual.
• Do not use attachments not recommended or provided by the
supplier.
• Never attempt to charge this appliance if the USB cable is frayed
or the plug is damaged.
• Keep the USB cable away from heated surfaces.
• Never drop or insert objects into any of the appliances openings.
• This appliance is intended for household use only.
• Do not use outdoors, or operate where aerosol (spray) products
are being used, or where oxygen is being administered.
• Do not plug in or unplug this appliance when your hands are wet.
• Do not use extension cords or a voltage converter with this
appliance.
• Do not wrap the USB cable around the appliance.
• Always store the appliance and charger in low moisture area.
• Do not expose the appliance to temperatures over 140° F (60° C).
• Detach removable USB cable from the appliance during storage.
• Do not use this shaver if the cutting head surfaces are damaged
or broken as skin injury could occur.
• This shaver and trimmer are intended for use on scalp hair only.
It should not be used for facial hair or longer hair on your body.
Product Features
1. On/Off Button
2. Head assembly
3. Individual flexing blades
4. Hair Pocket
5. Pop Up Trimmer
6. Turbo button
7. Charging indicator lights
8. Charging port
Not shown:
• Head Guard
• Cleaning Brush
• USB cable
• Lubricating oil
(not included with all models)
• Storage Bag
(not included with all models)
SAVE THESE INSTRUCTIONS
Specifications
Guidelines
• Do not attempt to shave head hair that is longer than 4 days growth or
2.0 mm. The head shaver is intended to maintain the shaved look and
can be used daily or every two or three days.
• The head shaver cannot shave long hair down to the shaved length.
If your hair is longer than 2.0 mm you should trim it down with a hair
clipper first before using the head shaver.
• The head shaver can be used dry or it can be used with shaving cream
or gel in the shower.
1. Hold the head shaver body in the palm of your hand. Press the On/Off
switch to turn the head shaver on.
2. Press the five cutting heads against your scalp. It is not necessary
to press hard to shave. Pressing hard does not cut closer and could
increase irritation. The cutting head will flex to follow the contours of
your head.
3. Move the shaver slowly around your head. You may use linear strokes,
or rotating motion, whichever you feel is most effective picking up and
cutting your hair.
4. Use a hand held mirror to check the back of your head to confirm a
complete and thorough shave. You may also use your other hand to feel
for complete and consistent cutting.
5. It is not recommended to use the head shaver for facial hair.
6. When finished turn the shaver off.
Shaving Your Head
Charging
Charging Indicator Lights
Register Your New Product Today!
By registering your new Remington
®
product, you will receive special offers.
Register online at: RemingtonProducts.com
Power System Cordless (Rechargeable)
Initial Charge Time 2 Hours
Full Charge Time 2 Hours
Cordless Run Time Up to 60 Minutes
Indicators 4 LEDs
Voltage Type 5V dc with USB cable
Waterproof Yes
Replacement Head and Cutters
(fits both XR7100 and XR7200)
SPR-XR7100 (without titanium)
SPR-XR7100-T (with titanium)
Power System: Cordless - shaver can only be used when disconnected
from the USB cable. The shaver will not run while it is charging.
Before using, read the important safety instructions in this manual.
1. Ensure the product is switched off.
2. Connect the shaver to the USB cable and then connect the USB end of
the cable to a powered USB port.
3. Charge for 2 hours when using for the first time. This first charge is
important to the shaver’s battery life.
4. When empty, the battery should be charged for 2 hours for a full charge
and will provide up to 60 minutes of run time.
Caution:
• Make sure the shaver and your hands are dry when charging the shaver.
• Always charge the shaver in a cool, dry place.
During charging
Lights Charge level
0-25%
25-50%
50-75%
75-99%
Once fully charged, all 4 lights will stay on for 5 minutes and then go off.
Charge remaining
After use, when you switch off your shaver, the charging indicator lights
show the remaining charge for 5 seconds.
Lights Charge remaining
99-75%
75-50%
50-25%
25% or less
During use
The lights will illuminate backwards and forwards during use in a cycling
pattern.
• Your head shaver cannot be used when it is charging.
• When empty, the battery should be charged for 2 hours for a full charge
and will provide up to 60 minutes of run time.
• To preserve the life of the battery do not charge the battery after each
use. The best practice is to use the shaver until there is only a single
light left flashing and then recharge.
The pop-up trimmer is located at the back of the shaver body. It can be
used for trimming edges of beards, sideburns or ears.
1. To activate the trimmer, turn the shaver on. Slide down the release
button to pop the trimmer up (A).
2. Use cutting strokes in the direction opposite to the direction that the
trimmer folds away (B).
3. When finished, press the trimmer down and snap it back into the stored
position. (C)
Note: Lubricate teeth with oil every 6 months.
Use the Turbo feature to shave thick hair. Press the turbo button to operate
the shaver in Turbo mode. The charging indicator light pattern will speed
up. Press the turbo button again to deactivate turbo mode.
Pop-Up Trimmer
Turbo Feature
A B C
2
6
1
7
8
3
5
4
Product may vary slightly
from what is illustrated.
XR7100_7200_30114_E_IB_D.indd 1XR7100_7200_30114_E_IB_D.indd 1 8/29/23 2:04 PM8/29/23 2:04 PM
When your rechargeable shaver reaches the end of its useful life, the
batteries must be removed from the shaver and be recycled or disposed of
properly in accordance with your state and local requirements. If this is not
required by law, you may elect to dispose of the shaver with the batteries.
CAUTION! Do not put in fire or mutilate your batteries when disposing as
they may burst and release toxic materials. Do not short circuit as it may
cause burns. Dispose of properly in accordance with your local and state
requirements.
To Remove the Rechargeable Battery:
1. Ensure the device is discharged of all power. To do this, switch it on and
allow it to run until it stops.
2. Remove the head assembly by pulling it off.
3. Using a small screwdriver, pry the front panel off the handle.
4. Pry off then remove the two side panels.
5. Using a small flat screwdriver, pry off the display panel.
6. Unscrew the 4 screws and open the front housing.
7. Unscrew the 4 screws and remove the rear housing.
8. Pry the battery from the circuit board.
9. Disconnect the battery from the two connection wires.
Product Disposal
Please do not throw this product away with normal household waste. If possible,
take it to an official collection point in your area that recycles this type of product.
Thank you for considering the environment.
5V dc with USB cable Type: R29A, R29B
Questions or comments: Call 800-736-4648 in the U.S.
or visit RemingtonProducts.com.
Dist. by: Empower Brands, LLC, Middleton, WI 53562
®
Registered Trademark and
TM
Trademark of Empower Brands, LLC.
© 2023 Empower Brands, LLC. All rights reserved. 08/2023 30114
Made in China
T22-7002937-D
Shaver Replacement Parts
Please refer to the specifications’ table in this manual that lists the correct
replacement part number for your shaver.
It is very important to replace the shaving heads and cutters when
necessary to ensure a close, comfortable shave without irritation. We
recommend they be replaced every 12 months. Here are some signs of
head and cutter wear, indicating that replacement is needed:
• Irritation: As the heads get excessively worn you may experience some
skin irritation. This would be especially noticeable when you apply
moisturizing lotion.
• Pulling: When the cutters wear you may feel a sense of pulling and a
loss of closeness when you shave. This is an indication that it is time to
replace the shaving heads and cutters.
The replacement cutting head for your shaver is model
number SPR-XR7100.
How to Order Parts and Accessories
• Order Online: RemingtonProducts.com
Limited Five-Year Warranty
Empower Brands, LLC warrants this product to the original purchaser against
any defects that are due to faulty material or workmanship for a five-year period
from the original date of consumer purchase. This warranty does not include
damage to the product resulting from accident or misuse. If the product should
become defective within the warranty period, we will replace it free of charge.
For more information call 800-736-4648 in the U.S. or Canada.
Warranty excludes:
• Heads and cutters
KEEP ORIGINAL SALES RECEIPT AS PROOF OF PURCHASE FOR WARRANTY PURPOSES.
This warranty does not cover products damaged by the following:
• Accident, misuse, abuse or alteration of the product
• Servicing by unauthorized persons
• Use with unauthorized accessories
• Connecting it to incorrect current and voltage
• Any other conditions beyond our control
No responsibility, obligations, or liability is assumed for the installation or
maintenance of this product.
EMPOWER BRANDS, LLC SHALL NOT BE RESPONSIBLE FOR ANY INCIDENTAL,
SPECIAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS
PRODUCT. ALL IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO IM PLIED
WARRANTIES OF FITNESS AND MERCHANTABILITY, ARE LIMITED IN DURATION
TO FIVE YEARS FROM DATE OF ORIGINAL PURCHASE.
This warranty gives you specific legal rights and you may also have other rights
which vary from state to state or province to province. Some states do not allow
the exclusion or limitation of incidental, special or consequential damages.
This warranty shall not be valid where it is contrary to U.S. and other
applicable laws, or where the warranty would be prohibited under any
economic sanctions, export control laws, embargos, or other restrictive trade
measures enforced by the United States or other applicable jurisdictions.
This includes, without limitation, any warranty claims implicating parties
from, or otherwise located in, Cuba, Iran, North Korea, Syria and the disputed
Warranty
Crimea region.
Empower Brands, LLC Money-back Offer
If within 30 days after you have purchased your Remington
®
branded product from an
authorized source, you are not satisfied and would like a refund, return it with the sales
receipt indicating purchase price and date of purchase to the retailer from whom it was
purchased. Empower Brands, LLC will reimburse all retailers who accept the product
within 30 days from the date of purchase. If you have any questions concerning the
money-back guarantee, please call 800-736-4648 in the U.S. or Canada.
Remington Guarantees Satisfaction After 30 Days!
Remington 60-Day Money Back Guarantee*
If within 60 days after purchasing any Remington
®
product, you are not completely
satisfied and would like a refund, keep your receipt and contact us at
[email protected] or call 800-736-4648 in the U.S. or Canada.**
*Applies to U.S. and Canadian customers’ returns only.
**Terms and conditions apply.
1. Refund will be in the form of a check issued in U.S. Dollars and will include
applicable taxes, if any, paid by customer.
2. Please allow 4 – 6 weeks to receive your refund by check.
1. After each use, hold the shaver over a bin and remove the top of the
shaving head.
2. Pull the cutting head unit off the head assembly (A).
3. Empty the clippings that have collected inside the hair pocket into the
bin.
4. The head can be rinsed under a running tap (B).
5. Use a cleaning brush to remove any shaving debris.
6. Shake off excess water and allow to dry before reassembly.
7. To maintain optimum performance, the blades must be kept lubricated.
Place a small drop of oil onto a fingertip and then touch the oiled
fingertip to each cutter head, gently wiping the oil onto the cutter. Wipe
any excessive oil off the surface of the cutters. Hair clipper oil or sewing
machine oil are suitable for this purpose.
8. Oil should be applied weekly or if the shaver begins to ‘pulse’ indicating
lubrication is required. (Silicone based pressure pack lubricants are not
recommended.)
Maintenance
Safety Mode
Cleaning and Lubrication
Care for your product to ensure a long lasting performance. We
recommend that you clean it after each use.
The Balder Shaver is designed to collect all the hair clippings while it cuts.
This avoids clippings from spilling onto bathroom counters or shower
stalls, making clean up easy.
• When cleaning the shaver, make sure it is turned off and disconnected
from the charging cable.
• The shaver is washable and can be cleaned by rinsing under warm
water.
• When using shave creams or gels with the shaver, it is especially
important to clean after each use to prevent the gel from drying and
clogging the cutters.
• When cleaning the external surfaces of the shaver, do not use strong
detergents or other chemicals.
• To dry, wipe the surface of the shaver with a dry towel. Do not use a
hair dryer or heater to dry the shaver.
• The shaver head and neck assembly is designed to be detachable from
the shaver body. Simply pull upwards from the neck of the shaver for
easy release. To reattach the neck, align it with the neck attachment
cavity so that it clips back into position.
• Your head shaver will turn itself off and enter safety mode if the demand
on the battery is too high. This can be because of inadequate cleaning or
excessive hair clippings in the hair pocket.
• If this occurs, open and clean your shaver. The left and right charging
indicator lights will flash for ten seconds. After an additional 5 seconds
your shaver will reset itself and be ready to operate as normal.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate this device.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
XR7100_7200_30114_E_IB_D.indd 2XR7100_7200_30114_E_IB_D.indd 2 8/29/23 2:04 PM8/29/23 2:04 PM
