成品尺寸：105x150mm
材质：105G双铜，4色印刷，
骑马钉 共20P
Gemini BeatGrip
Magnetic Bluetooth Party Speaker
©2024 Innova�ve Concepts & Design LLC. All Right Reserved.
Bluetooth® is a registered trademark of Bluetooth SIG Inc.
Product Specifica�ons and colors may vary from photo.
Manufactured and serviced by:
Innova�ve Concepts & Design LLC
458 Florida Grove Road
Perth Amboy, NJ 08861 USA
(732)587-5466
geminisound.com
封面
What’s Included
Please ensure that you find these accessories with your BeatGrip package
• Gemini BeatGrip
• USB-C Charging Cable
• User Manual
2
INDEX
What's Included 2
Precau�ons 3
Features 4
Product Overview 5
Opera�ons 7
Specifica�ons 10
FCC Compliance Statement 11
Legality & Safety 12
Warranty Info 13
Manual en Español 14
3
PRECAUTIONS
PLEASE READ THESE INSTRUCTIONS GIVEN IN THIS MANUAL AND THOSE
MARKED ON THE UNIT
This set has been designed and manufactured to assure personal safety. Improper
use can result in electric shock or fire hazard. The safeguards incorporated in this
unit will protect you if you observe the following procedures for installa�on, use
and servicing. This unit is fully transistorized and does not contain any parts that
can be repaired by the user.
WARNINGS
Fire and electric shock hazard
1 - Do not place any open flame sources, such as lighted candles, on or near the
apparatus.
2 - Do not a�empt to service the apparatus yourself.
3 - Opening or removing covers may expose you to dangerous voltages or other
hazards and will void the manufacturer’s warranty.
4 - To prevent risk of fire or electric shock, avoid overloading wall outlets, extension
cords, or integral convenience receptacles.
5 - Lightning storms Unplug this apparatus during lightning storms.
6 - Object and liquid entry: Never insert objects of any kind through the openings of
this apparatus, as it may touch dangerous voltage points or short-circuit parts that
could result in a fire or electric shock. Care should be taken so that objects do not
fall and liquids are not spilled into the apparatus through openings in the enclosure.
NOTE: This unit may be submi�ed for changes in specifica�ons, characteris�cs
and/or opera�on without prior no�ce to user, in order to con�nue improving and
developing its technology.
CAUTION
RISK OF ELECTRIC SHOCK,
DO NOT OPEN
Cau�on: To reduce the risk of electric shock do not
open this device,there are no serviceable parts for
customers. Please refer any maintenance or repair
to qualified personnel.
This sign means the existence of
dangerous voltage inside the unit,
which states a risk of electric shock.
This sign means that there are important
instruc�ons of opera�on and handling in
the manual that comes with this device.
THIS PRODUCT MAY CONTAIN MINISCULE
AMOUNTS OF CHEMICALS INCLUDING
DEHP. WHICH ARE KNOWN TO THE STATE
OF CALIFORNIA TO CAUSE CANCER AND
BIRTH DEFECTS OR OTHER REPRODUCTIVE
HARM WWW.P65WARNINGS.CA.GOV
WARNING
4
FEATURES
Meet the Gemini BeatGrip Magne�c Bluetooth Speaker – a perfect blend of
portability and performance. Cra�ed for modern lifestyles, this handheld speaker
boasts a magne�c base for effortless a�achment to any metal surface, offering
you the freedom to enjoy music anywhere you go, rain or shine. With IPX6 weath-
er-resistant design, it ensures durability even in wet condi�ons. Immerse yourself
in high-quality audio, whether you're grooving to your favorite tunes or taking
calls via the built-in speakerphone. The BeatGrip's 2600mAh ba�ery ensures unin-
terrupted music with play�me up to 12 hours, making it your ideal companion for
outdoor adventures or cozy indoor moments. Addi�onally, its vibrant LED party
light sets the mood for any occasion. Elevate your audio experience with the
Gemini BeatGrip Magne�c Bluetooth Speaker – where style meets func�onality.
MAGNETIC DESIGN WITH LED LIGHT
Effortlessly a�ach to metallic surfaces for hands-free listening. The built-in LED light
adds ambiance to your music experience.
WIRELESS CONNECTIVITY
Seamlessly connect with your devices via Bluetooth for up to 12 hours of con�nu-
ous playback. Answer calls with the built-in microphone.
PREMIUM AUDIO PERFORMANCE
Enjoy crystal-clear sound quality with the BeatGrip's powerful speakers, perfect for
music, podcasts, and calls.
WEATHER-RESISTANT
Designed to withstand outdoor elements, making it ideal for various ac�vi�es and
environments.
PORTABLE AND VERSATILE
Compact and lightweight design, perfect for on-the-go use. Features TWS Wireless
Pairing between two units for an enhanced sound experience.
5
PRODUCT OVERVIEW
5
1
2
3
7
4
6
PRODUCT OVERVIEW
Long press 2s: Power on/off
Short press one �me: Play/Pause; Pick up/Hang up call
Short press twice: Switch LED ligh�ng mode
Short press 3 �mes: Protect call privacy; Reject incoming
call; TWS connect/disconnect
Short press one �me: Increase volume
Long press 2s: Next song
Short press one �me: Decrease Volume
Long press 2s: Previous song
USB Type-C Charging port
Telephone Microphone
LED Party Light
5 Modes
Short press at same �me: Bluetooth disconnec�on
Long press 2s at the same �me: Turn on/off SOS light
LED Status indicator:
Power on/ TWS = Blue LED on
Bluetooth Search = Flashing Blue LED
Low ba�ery = Flashing Red LED
Charging = Red LED on
Fully charged = LED off
1
2
3
2/3
4
5
6
7
6
OPERATIONS
1. Power On/Off
• Long press bu�on (1) 2s to power on/off.
2. Bluetooth Mode
• Long press bu�on (1) 2s to power on with tone,
speaker will enter into bluetooth pairing mode,
indicator (4) will flash blue.
• Choose “Gemini BeatGrip” in your bluetooth list, there
will be tone once connected successfully, and indicator
(4) will become solid blue. Now, you can play music.
3. TWS Connec�on
• A�er power on but before connected with any device, short press bu�on (1)
3 �mes on either speaker to turn on TWS func�on, you will hear prompt tone and
the blue indicator will flash.
• There will be beep once paired successfully, then the blue indicator of linked
speaker will be solid on and the blue indicator of master speaker will flash, now
you can connect speaker with Bluetooth device for stereo playback from both
speakers.
Gemini BeatGrip
Bluetooth
My Device
Power bu�on
Status indicator
LED light
TWS
Power bu�on
7
4. Volume Control
• Short press bu�on (2) one �me for volume up, there will be beep when maxi-
mum volume is reached.
• Long press bu�on (2) 2s for next song.
• Short press bu�on (3) one �me for volume down.
• Long press bu�on (3) 2s for previous song.
5. LED Ligh�ng Mode
• A�er power on, double click bu�on (1) to switch LED ligh�ng mode (Mode 1
/ Mode 2 / Mode 3 / Mode 4 / Mode 5 / Off)
• Long press both bu�ons (2/3) at the same �me for 3 seconds to turn
on/off Ligh�ng.
6. Calling
• When a call is incoming, short press bu�on (1) to answer.
• Short press bu�on (1) 3 �mes to hang up.
• During a call/conversa�on, short press bu�on (1) to hang up.
• Short press bu�on (1) 3 �mes to protect call privacy (move call to phone).
Bu�on
Bu�on
Reject Answer
Power button
8
7. Power Saving
• Speaker will power off automa�cally to save ba�ery when nothing is connected
a�er 10 minutes.
8. Charging
Important note:
• Use supplied USB-C charging cable
• Use an output source 5V/2A (or above)
• Charge when you hear low ba�ery prompt tone or the indicator flash red. The
red indicator will be normally on while charging and switch off a�er fully charged.
9
SPECIFICATIONS
Ac�ve/Passive
Amplifier Type
Driver Size
Total Power
Media Player
Bluetooth
Ligh�ng
Frequency Response
Max Peak SPL @ 1 Meter
Enclosure Material
Moun�ng Op�ons
Ba�ery Specifica�ons
Charging Current
Ba�ery Charge Time
Talking Time
Product Size
Product Weight
Ba�ery Specs
Ac�ve
Class D
2 x 2”
30W Peak
Bluetooth only
BT V5.3 (AC6956F)
RBG LED Party Light
60Hz-18kHz
85 dB
ABS + Plas�c
Magne�c mount
3.7V/2600mAh
5V / 1A
5-6 hours (70% volume, LED ligh�ng off)
6-8 hours (50% volume, LED ligh�ng off)
3-4 hours
8-10 hours
199 x 80 x 47.2mm
.43 Kg
2600mAH Lithium-Ion Rechargeable Ba�ery
Ba�ery Play�me
10
Responsible Party Name:
Innova�ve Concepts & Designs LLC
Company address:
458 Florida Grove Road
Perth Amboy, NJ, 08861 USA
FCC Compliance Statement
This device complies with Part 15 of the FCC Rules. The opera�on is subject to the
following two condi�ons:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that
may cause undesired opera�on.
Note: This equipment has been tested and found to comply with the limits for a
class B digital device, pursuant to Part 15 of the FCC Rules. This equipment gener-
ates uses and can radiate radio frequency energy and if not installed and used in
accordance with the instruc�ons, may cause harmful interference to radio com-
munica�ons. However, there is no guarantee that interference will not occur in a
par�cular installa�on. If this equipment does cause interference to radio or televi-
sion recep�on, which can be determined by turning the equipment off and then
on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separa�on between the equipment and receiver.
• Connect the equipment to a different outlet so that the equipment and receiver
are on different branch circuits.
• Consult the dealer or an experienced radio/TV technician for help.
FCC ID: 2AE6G-BEATGRIP
11
LEGALITY & SAFETY
The device is not intended for use by people (including children) with reduced
physical, sensory or mental capacity. People who have not read the manual, unless
they have received an explana�on by someone responsible for their safety, should
not use this unit. Children should be monitored to ensure that they do not play with
the device. The device should always be readily accessible. The device should not
be exposed to water. No objects filled with liquids, such as vases, shall be placed on
the device. Always leave a minimum distance of 10 cm around the unit to ensure
sufficient ven�la�on. Open flame sources, such as candles, should not be placed on
top of the device. The device is intended for use only in a temperate climate. At full
volume, prolonged listening may damage your hearing and cause temporary or
permanent deafness, hearing drone, �nnitus, or hyperacusis.
Listening at high volume is not recommended. One hour per day is not recommend
either. Danger of explosion if ba�ery is incorrectly replaced or not replaced by the
same type or equivalent. The ba�ery should not be exposed to excessive heat such
as sunshine or fire. Different types of ba�eries, or new and used ba�eries, should
not be mixed. The ba�ery must be installed according to its polarity. If the ba�ery
is worn, it must be removed from the product. The ba�ery must be disposed of
safely. Always use collec�on bins to protect the environment.
The ba�ery can only be replaced by the maker of this product, the sales department, or
a qualified person. Switch the device off where the use of the device is not allowed or
where there is a risk of causing interference or danger - for examples: on an
aircra�, or near medical equipment, fuel, chemicals or blas�ng sites. Check the
current laws and regula�ons regarding the use of this device in the areas where you
drive. Do not handle the device when driving.
Concentrate fully on driving. All wireless devices are suscep�ble to interference
which may affect their performance. All our devices conform to interna�onal/na�onal
standards and regula�ons, and we aim to limit user exposure to electromagne�c
fields. These standards and regula�ons were adopted a�er the comple�on of extensive
scien�fic research. This research established no link between the use of the mobile
headset and any adverse effects on health if the device is used in accordance with
standard prac�ces. Only qualified people are authorized to install or repair this
product. Only use ba�eries, chargers and other accessories which are compa�ble
with this equipment. Do not connect incompa�ble products. This equipment is not
waterproof. Keep it dry. Keep your device in a safe place, out of the reach of young
children. The device contains small parts which may present a choking hazard to kids.
12
WARRANTY
A. Innova�ve Concepts & Designs LLC guarantees its products to be free from defects
in materials and workmanship for one (1) year from the original purchase date.
Excep�ons: Laser assemblies on CD Players, ba�eries, cartridges, and crossfaders
are covered for 90 days.
B. This limited warranty does not cover damage or failure caused by abuse, misuse,
abnormal use, faulty installa�on, improper maintenance, or any repairs other than
those provided by an authorized Innova�ve Concepts & Designs Service Center.
C. There are no obliga�ons of liability on the part of Innova�ve Concepts & Designs
for consequen�al damages arising out of or in connec�on with the use or performance
of the product or other indirect damages with respect to loss of property, revenues,
of profit, or costs of removal, installa�on, or reinstalla�on. All implied warran�es for
Innova�ve Concepts & Designs, including implied warran�es for fitness, are limited
in dura�on to one (1) year from the original date of purchase, unless otherwise
mandated by local statutes.
WELCOME TO THE GEMINI FAMILY!
At Gemini, our highest priority is making your experience unforge�able. Need
help with se�ng up, troubleshoo�ng, or looking for some �ps?We're here for
you, Monday through Friday 9AM-5PM EST.
@
@GeminiSoundHQ
13
FUNCIONES
Conoce el altavoz Bluetooth magné�co Gemini BeatGrip, una combinación perfecta
de portabilidad y rendimiento. Diseñado para es�los de vida modernos, este altavoz
de mano cuenta con una base magné�ca para sujetarlo sin esfuerzo a cualquier
superficie metálica, ofreciéndole la libertad de disfrutar de la música dondequiera
que vaya, llueva o truene. Con un diseño resistente a la intemperie IPX6, garan�za
la durabilidad incluso en condiciones húmedas. Sumérgete en audio de alta calidad,
ya sea que estés bailando tus canciones favoritas o atendiendo llamadas a través
del altavoz incorporado. La batería de 2600 mAh del BeatGrip garan�za música
ininterrumpida con un �empo de reproducción de hasta 12 horas, lo que lo convierte
en su compañero ideal para aventuras al aire libre o momentos acogedores en interiores.
Además, su vibrante luz LED para fiestas crea el ambiente para cualquier ocasión.
Eleva tu experiencia de audio con el altavoz Bluetooth magné�co Gemini BeatGrip,
donde el es�lo se une a la funcionalidad.
DISEÑO MAGNÉTICO CON LUZ LED
Se adhiere sin esfuerzo a superficies metálicas para escuchar con las manos libres. La
luz LED incorporada agrega ambiente a su experiencia musical.
CONECTIVIDAD INALÁMBRICA
Conéctese sin problemas con sus disposi�vos a través de Bluetooth para obtener
hasta 12 horas de reproducción con�nua. Responde llamadas con el micrófono
incorporado.
RENDIMIENTO DE AUDIO PREMIUM
Disfruta de una calidad de sonido ní�da con los potentes altavoces del BeatGrip,
perfectos para música, podcasts y llamadas.
RESISTENTE A LA INTEMPERIE
Diseñado para soportar los elementos exteriores, por lo que es ideal para diversas
ac�vidades y entornos.
PORTÁTIL Y VERSÁTIL
Diseño compacto y ligero, perfecto para su uso sobre la marcha. Cuenta con empare-
jamiento inalámbrico TWS entre dos unidades para una experiencia de sonido
mejorada.
14
DESCRIPCIÓN GENERAL DEL PRODUCTO
5
1
2
3
7
4
6
15
Pulsación larga 2 s: Encendido/apagado
Pulsación corta una vez: Reproducir/Pausa;
Contestar/Colgar llamada
Pulsación corta dos veces: Cambiar el modo de
iluminación LED
Pulsación corta 3 veces: Proteger la privacidad de
la llamada; Rechazar llamada entrante;
Conexión/desconexión de TWS
Pulsación corta una vez: Aumentar el volumen
Pulsación larga 2s: Siguiente canción
Pulsación corta una vez: Disminuir volumen
Pulsación larga 2s: Canción anterior
Puerto de carga USB �po C
Micrófono telefónico
Luz LED para fiestas
5 modos
Pulsación corta al mismo �empo: desconexión Bluetooth
Pulsación larga 2 segundos al mismo �empo: Enciende /
apaga la luz SOS
Indicador de estado LED:
Encendido / TWS = LED azul encendido
Búsqueda Bluetooth = LED azul intermitente
Batería baja = LED rojo intermitente
Carga = LED rojo encendido
Completamente cargado = LED apagado
1
2
3
2/3
4
5
6
7
16
OPERATIONS
1. Encendido/apagado
• Mantenga presionado el botón (1)
2 segundos para encender / apagar.
2. Modo Bluetooth
• Mantenga presionado el botón (1) 2 segundos
para encender con tono, el altavoz entrará en modo
de emparejamiento bluetooth, el indicador (4)
parpadeará en azul.
• Elija "Gemini BeatGrip" en su lista de bluetooth,
habrá tono una vez que se conecte correctamente y
el indicador (4) se volverá azul fijo. Ahora, puedes
reproducir música.
3. Conexión TWS
• Después de encender pero antes de conectarse con cualquier disposi�vo, presi-
one brevemente el botón (1) 3 veces en cualquiera de los altavoces para
ac�var la función TWS, escuchará el tono de aviso y el indicador azul parpadeará.
• Habrá un pi�do una vez que se empareje correctamente, luego el indicador azul
del altavoz vinculado se encenderá de forma fija y el indicador azul del altavoz
principal parpadeará, ahora puede conectar el altavoz con el disposi�vo Blue-
tooth para la reproducción estéreo desde ambos altavoces.
Gemini BeatGrip
Bluetooth
My Device
Power bu�on
Status indicator
LED light
TWS
Power bu�on
17
4. Control de volumen
• Presione brevemente el botón (2) una vez para subir el volumen, habrá un
pi�do cuando se alcance el volumen máximo.
• Mantenga presionado el botón (2) 2s para la siguiente canción.
• Presione brevemente el botón (3) una vez para bajar el volumen.
• Mantenga presionado el botón (3) 2s para la canción anterior.
5. Modo de iluminación LED
• Después de encender, haga doble clic en el botón (1) para cambiar el modo
de iluminación LED (Modo 1 / Modo 2 / Modo 3 / Modo 4 / Modo 5 / Apagado)
• Mantenga presionados ambos botones (2/3) al mismo �empo durante 3
segundos para encender / apagar la iluminación.
6. Llamadas
• Cuando se reciba una llamada, presione brevemente el botón (1) para responder.
• Presione brevemente el botón (1) 3 veces para colgar.
• Durante una llamada/conversación, presione brevemente el botón (1) para colgar.
• Presione brevemente el botón (1) 3 veces para proteger la privacidad de la
llamada (mover la llamada al teléfono).
Bu�on
Bu�on
Reject Answer
Power button
18
7. Ahorro de energía
• El altavoz se apagará automá�camente para ahorrar batería cuando no haya
nada conectado después de 10 minutos.
8. Carga
Nota importante:
• U�lice el cable de carga USB-C suministrado
• U�lice una fuente de salida de 5 V/2 A (o superior)
• Cargue cuando escuche el tono de aviso de batería baja o el indicador parpadee
en rojo. El indicador rojo estará normalmente encendido durante la carga y se
apagará después de la carga completa.
19
CARACTERÍSTICAS TÉCNICAS
Ac�vo/Pasivo
Tipo de amplificador
Tamaño del controlador
Potencia total
Reproductor mul�media
Bluetooth
Iluminación
Respuesta de frecuencia
Pico máximo de SPL @ 1 metro
Material de la carcasa
Opciones de montaje
Especificaciones de la batería
Corriente de carga
Tiempo de carga de la batería
Tiempo de conversación
Tamaño del producto
Peso del producto
Especificaciones de la batería
Ac�vo
Clase D
2 x 2"
Pico de 30 W
Solo Bluetooth
BT V5.3 (AC6956F)
Luz de fiesta LED RBG
60Hz-18kHz
85 dB
ABS + Plás�co
Montaje magné�co
3.7V/2600mAh
5V / 1A
3-4 horas
8-10 horas
199 x 80 x 47,2 mm
.43 Kg
Batería recargable de iones de li�o de 2600 mAH
Tiempo de reproducción
de la batería
5-6 horas
(70% de volumen, iluminación LED apagada)
6-8 horas
(50% de volumen, iluminación LED apagada)
封底
