OPENING THE SAFE WITH ACCESS KEY
1. Remove the small cover by gently pulling on it, to expose the
access key slot
2. Insert the access key and turn key to the left to unlock
3. Turn handle to the right to open safe door
4. Turn access key to the right to lock, remove key and replace
small plug
NOTE
Store access keys in a secure place. NOT inside of safe
See reverse side for more information
3/24
BC691
A
C
E
F
B
D
Parts of the Control Panel
C. LCD Screen
D. Key Pad
A. Handle
B. Override Key and Cover
Parts of the Inside of the Safe Door
E. Initialization Button F. Battery Compartment
PARTS OF THE SAFE
User Manual For
Fireproof Digital Keypad Safe
WARNING
- Avoid leaving door open and unattended; it will allow
unauthorized individuals to reprogram the safe, gaining full
access to the safe and its contents.
- Gun Warning, do NOT storage items such as firearms,
combustible materials, or medication in this unit.
- The safe can withstands heat up to 1700°F for 1 hour. The
interior will reach up to 350°F. Avoid storing items such as
pearls, digital media, back up tapes, data cartridge, CD’s etc.
These items sustain heat damage at temperatures much lower
than 350°F.
- The safe has a proprietary insulation that has a high moisture
content. To avoid humidity damage to contents we recommend
placing a desiccant or dehumidifier inside the safe to protect
the contents from rust or mildew.
- If you are storing delicate items such as jewelry, photos, etc.
we recommend putting them in an air-tight container, prior to
placing them in the safe for storage.
- In the event of a fire, we recommend caution when opening the
safe. If you feel unsure about opening the safe because of the
contents stored, contact your local fire department for
assistance.
- Store emergency keys in a secure place; NOT inside of
the safe.
NOTE: BARSKA is not responsible for any damage or lost
contents in the safe due to moisture.
NOTE: BARSKA is not responsible if the safe is stolen or
contents in the safe.
Read all instructions before using this safe.
BATTERIES
1. Remove battery cover on the inside of the safe door
2. Insert 4 AA batteries into the battery compartment and pay
attention to the polarity of the batteries
3. Replace compartment cover
REPLACING BATTERIES
If LCD displays LO BAT, this indicates that the batteries are low.
1. Open safe by using the access key
2. Repeat steps 1-3 of “Batteries” above and replace old batteries
with new batteries
3. Close safe and ensure that the safe is locked
NOTE
After reinserting batteries safe retains last personal pin codes
saved
CREATING PERSONAL PIN CODES
For security purposes, change the factory default codes as soon as
possible and before placing valuables in the safe.
NOTE
1st default pin code is 1234
2nd default pin code is 123456
NOTE
Safe retains only two 3-8 digit pin codes
1st Personal Pin Code
1. Open safe either by default pin codes or access key
Note: A beep will sound for each key pressed
2. Input the factory preset pin code #1234# then press * button
rapidly, on the LCD screen one dash will be blinking
3. Input your personal pin code, press # to confirm the LCD
screen will show -----, input digit pin code again, press # to
confirm
4.“Into” appears in the LCD screen which indicates that your pin
code is saved
©2024 BARSKA® | Pomona, CA 91767 | www.barska.com
SAFE/LOCK BOX
1 YEAR LIMITED WARRANTY
BC767
RESET PERSONAL PIN CODES
1. Open safe by entering either of the personal pin codes or by
using the access key
2. Press and hold down the initialization button on the inside of
the safe door, release initialization button
3. On the LCD screen it will show CLEAR, indicating that the pin
codes have been deleted.
4. The safe is now in default mode. Default pin codes are 1234
and 123456
5. See “Initial Numeric Pin Codes” to change default pin codes
CARE AND MAINTENANCE
- For security purposes, change the factory default codes as
soon as possible
- If necessary use a damp cloth to clean the safe. DO NOT use
chemicals or cleaning agents
- Keep liquids away from the control panel. Spills on the control
panel will cause damage and possibly electric shock
- Secure safe in a proper area to prevent it from falling and
causing damage or injury
- DO NOT over stuff the contents of the safe, it can damage the
motor mechanism or the contents
- DO NOT disassemble the product. For all repairs and
maintenance, contact authorized service centers or distributor
BARSKA Customer Service
Replacement Keys: When calling for replacement or additional
access keys have the access key code number ready. The access
key code is etched on the access keys and on the access key slot.
User Manual For
Fireproof Digital Keypad Safe
CREATING PERSONAL PIN CODES (continued)
2nd Personal Pin Code
For security purposes you must change the 2nd pin code set
1. Press #123456# then press * button rapidly, on the LCD screen
one dash will be blinking
2. Follow steps 3 and 4 of “1st Personal Pin Code”
NOTE
Be sure to write down these codes immediately and store in a
safe place
TESTING THE PERSONAL PIN CODES
1. With safe door open, and the handle in the locked position.
Press # and enter in 1st set of the personal pin code on the key
pad and press # again
Successful Save
- You will hear 3 short beeps
- The LCD screen will show OPEN
- Move handle to the right to retract bolts
Unsuccessful Save
- You will hear a consistent beeping
- The LCD screen will show ERROR
- Handle will not move
- Repeat steps Creating Personal Pin Codes, of 1st Personal
Pin Code
2. To test 2nd personal pin code. Press # and enter in 2nd set of
the personal pin code on the key pad and press # again. See
“ Successful Save” and “ Unsuccessful Save” above
3. Close safe and ensure that the safe is locked
OPENING SAFE WITH PERSONAL PIN CODES
1. Press # then input either of the personal pin codes then press #.
2. Turn the handle to the right and pull the safe door open
NOTE
After entering pin, you have 5 seconds to turn the handle before the
mechanism re-locks automatically
3. To close safe, close door and turn handle to the left to lock
BARSKA warrants this new safe/lock box to be free of defects
in material and/ or workmanship under normal use for a period
of twelve (12) months from the date product is purchased. This
limited warranty is delimited to repair or replacement only. This
warranty does not cover damage caused by improper
installation or maintenance. BARSKA disclaims all liability for
incidental or consequential damages resulting from misuse,
abuse, accident (such as dropping), fire, flood, service or
repairs other than those performed by BARSKA, acts of nature,
or arising out of any breach of this warranty. Altering the
product under any circumstances will automatically void the
warranty.
For service under this limited warranty, please have available
the proof of purchase and the purchase date and location as
well as a detailed description of the problem. This warranty is
not transferable and only applies to the original purchaser with
a proof of purchase from BARSKA or from an authorized
dealer. This warranty applies only to products purchased within
the United States, excluding Alaska, the Hawaiian Islands and
all U.S. territories in the Caribbean and the Pacific.
BARSKA will examine and go through troubleshooting
procedures, product repair or replacement of defective part(s)
or units with new part(s) or provide a new unit, if necessary,
during the warranty period. Reasonable shipping/handling
charges may apply and are based on Barska sole discretion.
Purchaser shall be required to prepay Shipping/handling
charges with a check or money order to BARSKA at time
product is returned. The Return Merchandise Authorization
Number (RMA#) and shipping/handling charge MUST be
obtained from BARSKA in advance of return. BARSKA shall
not be liable for damages or loss occurring during shipping.
Please visit via www.barska.com or call 909.445.8168 to obtain
the RMA#, Shipping/handling amount, and for more
information.
BARSKA reserves the right to modify or discontinue, without
prior notice to the purchaser, any model or style of the product.
BARSKA will determine, at its sole discretion, whether a
product will be repaired or replaced. BARSKA reserves the
right to discontinue or change any feature of its products at any
time. If an exact replacement or product is not available,
BARSKA reserves the right to provide a part or product that
matches as closely as possible.
LIMITATION OF REMEDIES
BARSKA disclaims any warranties, express or implied,
whether of merchantability or fitness for a particular use,
except as expressly set forth herein. The sole obligation of
BARSKA under this limited warranty shall be to repair or
replace the covered product, in accordance with the terms set
forth herein. BARSKA expressly disclaims any lost profits,
general, special, indirect or consequential damages which may
result from breach of any warranty, or arising out of the use or
inability to use any BARSKA product. Any warranties which are
implied and which cannot be disclaimed shall be limited in
duration to a term of one year from the date of original retail
purchase.
Some states do not allow the exclusion or limitation of
incidental or consequential damages or limitation on how long
an implied warranty lasts, so the above limitations and
exclusions may not apply to you.
BARSKA
855 Towne Center Drive, Pomona, CA 91767
Note: All information, feature, and specification displayed herein
are based on the data available at the time of publishing, thus
they are subject to change without notice. All product pictures
displayed herein are for illustration purposes only. The actual
product may vary due to different circumstances.
