Technical Support and E-Warranty Certificate www.vevor.com/support
SPARKLING WATER MAKER
MODEL:HR-192 HR-192-AUS
We continue to be committed to provide you tools with competitive price.
"Save Half", "Half Price" or any other similar expressions used by us only represents an
estimate of savings you might benefit from buying certain tools with us compared to the major
top brands and does not necessarily mean to cover all categories of tools offered by us. You
are kindly reminded to verify carefully when you are placing an order with us if you are
actually saving half in comparison with the top major brands.
- 1 -
MODEL:HR-192 HR-192-AUS
Have product questions? Need technical support? Please feel free to
contact us:
Technical Support and E-Warranty Certificate
www.vevor.com/support
NEED HELP? CONTACT US!
This is the original instruction, please read all manual instructions
carefully before operating. VEVOR reserves a clear interpretation of our
user manual. The appearance of the product shall be subject to the
product you received. Please forgive us that we won't inform you again if
there are any technology or software updates on our product.
SPARKLING WATER
MAKER
- 2 -
Warning-To reduce the risk of injury, user must read
instructions manual carefully.
INCLUDED IN THE BOX
Sparkling water maker
This book
Water bottle
PRODUCT COMPONENTS
- 3 -
ATTACHING THE GAS CYLINDER
Carefully lay the machine down on the side.
Unscrew the plastic sealing from the cylinder top. Carefully insert the gas
cylinder through the hole at the bottom of machine. Don’t drop the cylinder
into the hole. When you feel that it reaches the top, begin screwing the
cylinder clockwise until it is fastened. Don’t screw too hard since this might
break the threads holding the gas cylinder in place.
When you need to replace the gas cylinder, lay the machine down on the
side and unscrew it counterclockwise and then carefully pull it out of the
compartment.
THE CARBONATION PROCESS
- 4 -
1.Fill the water bottle
Rinse the water bottle with
lukewarm water before you use it
for the first time. Fill the water
bottle with cold, clean water up to
the marked filling line. If you fill too
much you will get a lot of water in
the spill tray during carbonation.
2. Attach the water bottle
Screw the water bottle into the
water bottle socket. Screw
counterclockwise if viewed from
above. Don’t screw extremely hard
- just make sure the water bottle
sits properly.
3.Carbonate the water
4.Ventilate the bottle
- 5 -
Push the button downside until you
hear a sound from the machine.
Release the button to horizontal
position. The remaining pressure
in the water bottle will be released
automatically with a puff sound.
Then unscrew the water bottle.
RINSING THE WATER BOTTLE
.
To clean the water bottle, using clean
lukewarm water with a mild detergent. If
using a dishwasher brush, make sure the
brush is intended to be used for cleaning
plastic bottles and do not leave any
scratches. Do not use solvents, strong
detergents or cleanser with abrasive
substances.
Never wash the water bottles in a
dishwasher. The water bottles can
withstand a maximum temperature of 40
degrees Celsius.
EMPTYING THE SPILL TRAY
Why is there water in the spill tray?
Water that flushes through the machine during the carbonating process
ends up in the spill tray. This is often a result of too much water in the water
bottle. Make sure the water is not filled above the maximum filling line.
- 6 -
SAFETY GUIDELINES
Never carbonate anything other than plain water
When carbonating, a small amount of liquid could bubble up through the
valves. If the water contains sugar or other compounds, the valves could
start malfunction and the machine could potentially be dangerous to use.
Never add fruit slices, ice and flavors in the water bottle. Use a pitcher or
mix it directly in your glass. Rinse the water bottle carefully before filling it
with water.
Don’t put fruits,
vegetables or herbs in
the water bottle before
carbonating.
Don’t put flavors or
syrup into the water
bottle before
carbonating.
Don’t carbonate wine.
Don’t carbonate juice
or milk.
Don’t put ice in the
water bottle before
carbonating.
Don’t give new life to
old flat soda.
- 7 -
Never clean the water bottle in the dishwasher
The water bottle is designed to withstand pressures up to double the
working pressure of the machine. However, this ability is quickly destroyed
if the bottle is exposed to heat above 40 degrees Celsius. Most
dishwashers operate at very high temperatures, so therefore never put the
bottle in the dishwasher.
Keep the sparkling water maker away from potential sources of heat
Due to the laws of physics, the pressure in the gas cylinder depends on the
outside temperature. The sparkling water maker is optimized for using the
gas cylinder at room temperature. If the cylinder gets too hot, it could be
dangerous to use the machine.
Don’t place the sparkling water
Don’t place the sparkling water
- 8 -
maker in a sunny window.
maker close to a hot radiator.
Don’t place the sparkling water
maker close to an open flame.
Don’t use the sparkling water
maker in extreme hot conditions.
Do not transport the sparkling water maker with the gas cylinder
attached
Always unscrew the gas cylinder during transport.
- 9 -
Do not use the water bottle after the expiry date
After the bottle has expired, the plastic may have weakened a little bit and
for safety reasons the water bottle should be replaced with a new one.
DO NOT USE WATER BOTTLES FROM OTHER BRANDS.
THIS CAN DAMAGE THE MACHINE AND LEAD TO A SAFETY RISK.
More advice on the water bottle
Never use a bottle that has been deformed,discolored or scratched. Never
put the bottle in the freezer.
Keep bacteria and bad smell away by always keeping the bottle clean and
storing it without the cap being screwed on.
Never inject gas into an empty water bottle
Using an empty water bottle may lead to a higher pressure in the water
bottle which could result in a safety risk.
- 10 -
Keep the sparkling water maker away from children
Children are way too creative to use this product.
Always use your sparkling water maker in an upright position⊘
If used in other ways than standing in an upright position, dangerous levels
of CO2 could accumulate in the water bottle during carbonation.
TECHNICAL SPECIFICATIONS
SPARKLING WATER MAKER
WATER BOTTLE
- 11 -
Height: 423mm
Width: 125mm
Depth: 240mm
Weight: ≈950g
Height: 285mm
Diameter: 80mm
Weight: 209g
Volume: ≈ 0,8 l (up to the filling
line)
Compatible with standard gas cylinders approved for
use with machines from all major brands worldwide*.
Other gas cylinders might seem to work but could
damage the machine or cause safety risk.
*Except Australia and New Zealand
- 12 -
Manufacturer: Shanghaimuxinmuyeyouxiangongsi
Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu,
shanghai 200000 CN.
Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD
NSW 2122 Australia
Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim
Place, Rancho Cucamonga, CA 91730
REP
UK
YH CONSULTING LIMITED. C/O YH Consulting
Limited Office 147, Centurion House, London
Road, Staines-upon-Thames, Surrey, TW18 4AX
REP
EC
E-CrossStu GmbH
Mainzer Landstr.69,
60329 Frankfurt am Main.
