5.3 Replacing Test Leads ............................... 25
Note-Important safety information, refer to the
instruction manual.
Conforms to UL STD. 61010-1, 61010-2-032,
61010-2-033; Certified to CSA STD C22.2 NO.
61010-1, 61010-2-032,61010-2-033
Complies with European (EU) safety standards
Earth (ground) TERMINAL
Equipment protected throughout by double
insulation or reinforced insulation.
Direct current
Alternating current
CAT III: MEASUREMENT CATEGORY III is applicable to
test and measuring circuits connected to the distribution
part of the building's low-voltage MAINS installation.
50
Temp
3.0V
50Ω
/1°F
-4°F~32°F
33°F~752°F
753°F~1832°F
±(5.0% of rdg +7 digit)
±(2.0% of rdg +4 digit)
±(2.0% of rdg +4 digit)
/
/
/
Replace test leads if leads become damaged or worn.
Use meet EN 61010-031 standard, rated CAT III 600V, or
better test leads.
WARNING
5.3 Replacing Test Leads
26
