WALL MOUNT
INSTALLATION & USER
INSTRUCTIONS
Qasair Rangehoods Installation Instructions2
Qasair Rangehoods Installation Instructions
3
Standard Warranty / Extended Warranty
Important Information
Instructions for Models
H Series & PYR
Instructions for Models
3F / SEA / SMF / CM / STA / STF / IN
Instructions for Models
BRH / LAM / BAR / MAR / MAJ / FAS
Installation Ideas
Operation Details, Rangehood Cleaning, Filter Cleaning
Ducting Pieces
Remote Switching Specications
Appliance Guarantee
Guarantee Exclusions
6
4
10
28
39
42
54
59
62
61
60
Qasair Rangehoods Installation Instructions4
The installation of QASAIR Rangehoods must comply with the information in this booklet. QASAIR Rangehoods are
designed and made to work efciently over all domestic cookware available on the Australian market.
Clearance from cooktop to Rangehood
For electric hot plate cooktops
As there are no regulations for Rangehoods over an electric hot plate, please follow the manufacturers Instructions /
Recommendations.
For Induction cooktops
Induction cooktops may present problems with condensation on lters of Rangehoods.
All Qasair Rangehoods installed above an induction cooktop must be installed no less than 750mm between the
induction cooktop and the Rangehood, with the exception of the Eastmore (EAS) Rangehood which can be installed
no less than 600mm. Undermount (NDCH) and Conley (CON) Rangehoods are not suitable for induction cooktops.
For gas cooktops
All Qasair Rangehood installations over a gas appliance must comply with (AS/NZS 5601.1).
The Regulations for the installation of Gas Appliances (AS/NZS 5601.1) states that the clearance between the
highest part of the burner of a gas cooking appliance and a Rangehood be no less than 600mm. If the gas
appliance is designed for use without a cooking vessel like an indoor barbecue or open ame grill, then the
clearance from the cooking surface to the Rangehood shall be no less than 1200mm.
All Qasair Rangehoods installed above a gas cooktop must be installed no less than 600mm between the highest
part of the burner and the Rangehood.
The recommendation for Qasair Wallmount Rangehoods is that they be installed between 700 to 800mm above the
highest part of the burner. When the Rangehood is installed in a galley or partially enclosed kitchen the Rangehood
can be installed between 900 to 1000mm above the highest part of the burner.
Qasair Island Rangehoods should not be installed any higher than 800mm above the highest part of the burner as
any movement around the bench will result in fumes being drawn out from the catchment area of the Rangehood
with the exception of the Thermidor and Liverpool which for aesthetic reasons is installed ush with the ceiling.
Ducting
1. Every QASAIR Rangehood must be ducted to the outside atmosphere by the use of zinc-alume duct or
non-porous and non-ammable materials. Do not use of any type of exible ducting or plastic PVC piping.
Rangehoods must not be vented into a wall cavity or a ceiling space. Externally ducting the rangehood prevents
a build up of grease, which can be a re risk. Ensure the external outlet vent does not restrict the airow in any
way, as this may result in reduced performance.
2. QASAIR Rangehoods must be ducted in duct work equivalent to the outlet of the rangehood ie: The cross
sectional area of the rangehood outlet and the duct work must be equal. Do not reduce the duct size or have
sharp bends. Enlarge the duct size if the duct is to run 6 metres or longer. Advice from CONDARI is available to
ensure optimum performance. Always use nonammable materials to minimise the risk of re in the duct.
3. Ensure all ducting pieces are correctly tted and sealed with either duct tape or silicone to ensure that fumes
do not escape into the ceiling space and seep into living areas through vents or light ttings.
IMPORTANT INFORMATION
Qasair Rangehoods Installation Instructions
5
Other Important Information
1. Always adequately ventilate the room when the rangehood is in use at the same time as appliances
burning gas or other fuels.
2. WARNING: Incorrect venting will result in additional noise and a reduction in efciency. Exhaust air must not be
discharged into any chimney or ue, which may carry combustible products from other sources.
a) Do not discharge the air-ow from the rangehood into a ue used for exhausting fumes
from burning gas or fuel;
b) For cleaning purposes please refer to page 59 of installation instructions for stainless steel;
c) If cleaning is not carried out in accordance with the instructions as listed on page 59, there may be an
increased risk of re;
d) Some parts of the rangehood may become hot when cooking;
e) This appliance is not intended for use by persons (including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a person responsible for their safety.
3. The installation and tting of the rangehood should be done in such a way that will allow the unit to be removed
if service is required. Additional costs incurred in the removal of wall tiles, damage to walls or bench tops are not
covered by warranty.
4. To reduce the risk of xing screws coming in contact with live parts, do not drill or screw into the rangehood.
Live wires are encapsulated where possible to prevent user contact. If necessary drill from the inside out and
only through single sheet material.
5. NOTE: CONDARI recommend an air movement of between 1000 to 1400 cubic metres per hour over an indoor
barbecue, depending on the length of the duct run. Ensure a twin motor unit is installed over indoor barbecues
for optimum results. Barbecues should be positioned under the centre of the hood where the fans are mounted
and not near the outer edges where leakage may occur.
6. The lights in the rangehoods are LED and come with a night light except for D400L-1 and SEN400L-1.
7. If the supply cord is damaged, an authorised service centre or licensed electrician must replace it.
8. Do not ambé under the rangehood.
9. QASAIR domestic rangehoods must not to be used over barbecues approved for outdoor use only,
CONDARI make a range of hoods specically for outdoor barbecues in alfresco areas under the CONDOR
name.
10. CONDARI can manufacture rangehoods to be used over commercial cookers in domestic applications.
12. NOTE: Ensure all requirements are met with gas and electrical regulations and or state authorities.
Qasair Rangehoods Installation Instructions6
INSTALLATION INSTRUCTIONS
• H SERIES
• PYR
1. Remove canopy and flue from boxes and check you have correct model and flue.
2. Locate centre point of cooktop.
3. Use level or plumb line to mark centre up to ceiling.
4. Mark level line for base of canopy 700-800mm above bench 750mm desirable.
5. Check roof space above for wires and obstructions as now is the time to decide on any changes to location due
to immovable obstructions.
6. Mark flue size on ceiling and cut neat exact hole to pass flue through.
7. For rear ducted models cut hole in wall for vent to pass through.
8. Fix mounting bracket to wall at desired height.
9. Remove fan(s) from canopy by removing side fixing bolts and disconnecting electrical plug at flexible connector.
10. Locate solid fixing points on wall and drill holes in rear of canopy to suit. If no solid fixing is available then now is
the time to install fixing points. Four points are recommended with one on each side at top and one on each side
at bottom.
11. Drill hole in rear of unit to pass power connection through where available on wall.
12. Check flue slides through hole in ceiling.
13. Place canopy flat on floor and fit stainless flue over spigot pushing all the way down for a neat fit. Drill hole in
rear of flue and fix to canopy with pop rivet or screw.
14. Carefully lift canopy into position, guiding flue through ceiling and feeding power cable through hole in rear of
canopy. Make sure canopy is sitting correctly on mounting bracket then fix to wall through fixing holes with solid
screws. (You may need to place a packer behind canopy if wall is bowed to make the canopy sit correctly).
15. Complete electrical connection to 10 AMP junction box to local electrical authority regulations ensuring power is
turned off during work.
16. Fit ducting to outside or exterior wall vent for rear ducted models. (Seal rear vents onto rear of hood with
silicone). A plumber should seal roof penetration with appropriate flashing. All joins in ducting need to be sealed
with duct tape or silicone and only use approved ducting of the correct size for your canopy.
17. Fit motor(s) back into canopy with fixing bolts and plug electrical connector in.
18. Test run hood.
MOUNTING BRACKET
• Use vertically punched slot for centre line
• Before cutting any holes check ceiling space for structural beams. It may be possible at this point to relocate the
hood position.
The fixing points are prepunched holes in the back of the hood and it may be necessary to drill through the back
of the hood into the wall stud.
Recommended xing points
Installation must be carried out by the procedure outlined.
Failure to do so may void the guarantee.
Electrical: Wiring to the appliance must comply with State and local Regulations.
Connection to be carried out by a registered electrician.
Qasair Rangehoods Installation Instructions
7
Heritage
Technical Specification Sheet
H
Wall Mounted
3
310mm
Power Entry Vertical
Light Centres
Light Qty
600mm
600HL-1
LED Light
Conversion
Top/Back Back/Top
Nightlight
2
Condari Pty Ltd.
Filter Qty
2
Motor Qty
Motor Box /
Flue Width
150mm
Version: C 20/01/2015F
Body Width
Model 600HL-1
Page 1 of 2
Filter Size
272mm
x
3
5
5
m
m
NO
700HL-1
Square Square
130mm
900HL-1
N/A
YES
125mm
Power Entry Horizontal
PowderKote
Available
Corner Type
Electrical Connection
YES
Outlet Spacing
900mm
240mm
Cool
11
700HL-1
Cool
510mm
22
310mm
YES
Junction Box
NO
Junction Box
135mm 210mm
NO
YES
Square
N/A N/A
272mm
x
3
5
5
m
m
290mm
x
3
5
5
m
m
150mm
Junction Box
Model900HL-1
YESYES
1
240mm
Cool
240mm
700mm
2
5
0
0
3
0
0
1
5
0
1
1
0
A
v
a
i
l
a
b
l
e
L
e
n
g
t
h
s
:
D
L
E
6
0
0
m
m
D
L
E
9
0
0
m
m
D
L
E
1
2
0
0
m
m
D
L
E
1
5
0
0
m
m
1
0
6
3
0
M
i
n
i
m
u
m
H
e
i
g
h
t
:
3
0
0
m
m
M
a
x
i
m
u
m
H
e
i
g
h
t
:
1
8
0
0
m
m
HERITAGE - H
Qasair Rangehoods Installation Instructions8
Heritage
Technical Specification Sheet
H
Wall Mounted
YES
2
816mm
2
370mm
Cool
Model1500HL-2
1500mm1200mm
370mm
1200HL-2
YES
Cool
2
Power Entry Vertical
648mm
22
Cool
370mm
2
YES
5
Outlet Spacing
Model
Body Width
Motor Box /
Flue Width
Motor Qty
LED Light
4
1000HL-2
1000mm
510mm
3
Nightlight
Light Qty
Light Centres
Filter Qty
Junction Box
215mm
375mm
YES
272mm
x
3
5
5
m
m
272mm
x
3
5
5
m
m
1500HL-2
NO
1200HL-2
YES
150mm
Square
Version: C 20/01/2015F
Square
75mm
290mm
x
3
5
5
m
m
1000HL-2
Junction Box
130mm
100mm
NO
Square
Page 2 of 2
Junction Box
NO
250mm
YES
190mm
100mm
Condari Pty Ltd.
PowderKote
Available
Corner Type
Electrical Connection
Power Entry Horizontal
Filter Size
Conversion
Top/Back Back/Top
5
0
0
3
0
1
5
0
1
1
0
3
7
5
A
v
a
i
l
a
b
l
e
L
e
n
g
t
h
s
:
D
L
E
-
2
6
0
0
m
m
D
L
E
-
2
9
0
0
m
m
D
L
E
-
2
1
2
0
0
m
m
D
L
E
-
2
1
5
0
0
m
m
1
5
0
M
i
n
i
m
u
m
H
e
i
g
h
t
:
3
7
5
m
m
M
a
x
i
m
u
m
H
e
i
g
h
t
:
1
8
7
5
m
m
HERITAGE - H
Qasair Rangehoods Installation Instructions
9
Pyramid
Technical Specification Sheet
PYR
Wall Mounted
Conversion
Top/Back Back/Top
Filter Size
Model
Electrical Connection
Minimum Height
(H =)
Maximum Height
(H =)
PowderKote
Available
All-thread
Fixing Centres
Page 1 of 1
Corner Type
N/A
Filter Qty
3
Motor Qty
Light Qty
Light Centres
Motor Box /
Flue Width
Body Width
Model
Cool
YES
2
PYR 900L-1
1
900mm
270mm
510mm
LED Light
Nightlight
Condari Pty Ltd.
Junction Box
PYR 900L-1
Square
Version: B 20/01/2015F
NO
N/A
N/A
N/A
272mm
x
3
5
5
m
m
5
0
0
3
8
0
1
5
0
1
1
0
3
0
P
o
w
e
r
E
n
t
r
y
2
8
0
A
v
a
i
l
a
b
l
e
L
e
n
g
t
h
s
:
D
L
P
6
0
0
m
m
D
L
P
9
0
0
m
m
D
L
P
1
2
0
0
m
m
D
L
P
1
5
0
0
m
m
2
0
1
1
0
5
0
0
3
0
2
3
0
PYRAMID - PYR
Qasair Rangehoods Installation Instructions10
INSTALLATION INSTRUCTIONS
• 3F
• SEA
• SMF
• CM
• STA / STF
• IN (REMOTE SWITCHED)
1. Prepare wall by marking level line at desired height above cooktop.
2. Plumb line from centre of cooktop to ceiling and mark flue cut out.
3. Mark level line for base of canopy 700-800mm above bench 750mm desirable.
4. Position mounting bracket on wall and fix with four screws.
5. Cut a neat hole through the ceiling and remove any obstructing timbers.
6. Note: Various offsets are available from your QASAIR dealer to duct around any major structural beams which
cannot be removed. Ask your QASAIR dealer for advice.
7. In the case of back ducted models, cut a hole in the wall at the desired height.
8. Locate solid fixing point in wall to support hood. If there is no solid fixing point it will have to be placed in the wall
before proceeding. QASAIR recommend at least four (4) fixing points.
9. Drill holes in back of unit at suitable fixing points.
10. Drill 20mm hole in the rear of unit for 240 volt power cable as close as possible to junction box or use hole below
the junction box.
11. Attach flue (if applicable), then carefully lift into position on level line. Ensure flue is pushed into position and
electrical cable is fed into rear of unit.
12. Duct in approved manner to outside atmosphere.
Recommended xing points
Installation must be carried out by the procedure outlined.
Failure to do so may void the guarantee.
Electrical: Wiring to the appliance must comply with State and local Regulations.
Connection to be carried out by a registered electrician.
Qasair Rangehoods Installation Instructions
11
3 Flare
Technical Specification Sheet
3F Wall Mounted
3F 1200L-2
2
3
510mm
YESYES
2
1200mm
400mm
22
300mm
Cool
900mm
3F 900L-2
Cool
Light Centres
Filter Qty
Nightlight
Light Qty
LED Light
Motor Qty
Model
Body Width
Maximum Height
(H =)
Corner Type
648mm
Condari Pty Ltd.
4
All-thread
Fixing Centres
PowderKote
Available
Filter Size
Conversion
Top/Back Back/Top
Page 1 of 2
Motor Box /
Flue Width
Minimum Height
(H =)
Model
Electrical Connection
480mm
NO
3F 900L-2
272mm
x
3
5
5
m
m
Version: C 20/01/2015F
YES
1680mm
Junction Box Junction Box
NO
1680mm
YES
480mm
Round
N/A
Round
N/A
272mm
x
3
5
5
m
m
3F 1200L-2
Power Entry
Power Entry
A Transition is supplied to suit standard DL2 ducting.
Flues made to order for back ducted models.
Ø15mm Radius
Ø15mm Radius
Ø
5
1
0
8
0
9
0
2
5
0
4
8
0
1
8
0
A
v
a
i
l
a
b
l
e
L
e
n
g
t
h
s
:
6
0
0
m
m
9
0
0
m
m
1
2
0
0
m
m
3 FLARE - 3F
Qasair Rangehoods Installation Instructions12
3 Flare
Technical Specification Sheet
3F Wall Mounted
Filter Qty
Nightlight
Light Qty
Light Centres
Motor Qty
LED Light
Motor Box /
Flue Width
Model
Body Width
4
816mm
5
Conversion
Top/Back Back/Top
Condari Pty Ltd.
Maximum Height
(H =)
All-thread
Fixing Centres
Minimum Height
(H =)
Corner Type
3F 1500L-3 Model
648mm
Electrical Connection
PowderKote
Available
YES
Round
N/A
Version: C 20/01/2015F
Page 2 of 2
N/A
YES
450mm
3
1200mm
3F 1200L-3 3F 1200L-3
NO
Junction Box
272mm
x
3
5
5
m
m
480mm
1680mm 1680mm
3F 1500L-3
Round
Junction Box
Filter Size
3
2
Cool
272mm
x
3
5
5
m
m
NO
500mm
Cool
1500mm
2
YES
480mm
YES
Power Entry
Power Entry
Ø15mm
Radius
Ø15mm Radius
A Transition is supplied to suit standard DL3 ducting
.
F
l
u
e
s
m
a
d
e
t
o
o
r
d
e
r
f
o
r
b
a
c
k
d
u
c
t
e
d
m
o
d
e
l
s
.
5
1
0
8
0
9
0
2
5
0
4
8
0
A
v
a
i
l
a
b
l
e
L
e
n
g
t
h
s
:
6
0
0
m
m
9
0
0
m
m
1
2
0
0
m
m
2
3
0
3 FLARE - 3F
Qasair Rangehoods Installation Instructions
13
Motor Box /
Flue Width
Condari Pty Ltd. Page 1 of 2
Version: C 20/01/2015F
Body Width
Model
Motor Qty
Light Centres
Light Qty
Nightlight
LED Light
Filter Qty
Model
Filter Size
Conversion
Top/Back Back/Top
Electrical Connection
Minimum Height
(H =)
Maximum Height
(H =)
PowderKote
Available
All-thread
Fixing Centres
Corner Type
SEA 600L-1 SEA 900L-2SEA 900L-1SEA 600L-1SEA 900L-2SEA 900L-1
600mm
Centre
2
N/A
1
Cool
YES
1
272mm
x
2
7
2
m
m
NO
Junction Box
400mm
1450mm
YES
400mm
Square
900mm
N/A
1
Cool
YES
2
510mm
3
900mm
N/A
2
Cool
YES
2
510mm
3
272mm
x
2
7
2
m
m
NO
Junction Box
400mm
1450mm
YES
700mm
Square
272mm
x
2
7
2
m
m
NO
Junction Box
400mm
1450mm
YES
700mm
Square
Senator
Technical Specification Sheet
SEA
Wall Mounted
Power entry location
is the same for all
Senator models.
H
4
0
0
3
1
0
A
l
l
-
T
h
r
e
a
d
r
o
d
s
a
r
e
s
u
p
p
l
i
e
d
f
o
r
e
x
t
r
a
s
u
p
p
o
r
t
.
SENATOR - SEA
Qasair Rangehoods Installation Instructions14
1300
m
m
Square
1300
m
m
Square
YES
400mm
Junction Box
NO NO
1450mm
Junction Box
Square
PowderKote
Available
1000
m
m
All-thread
Fixing Centres
3
Cool
1500mm
N/A
Maximum Height
(H =)
22
816mm
5
816mm
5
Cool
YES YES
N/A
1500mm
Cool
2
SEA 1500L-2 SEA 1500L-3
N/A
2
YES
2
Junction Box
NO
SEA 1200L-2
272mm
x
2
7
2
m
m
YES
400mm
272mm
x
2
7
2
m
m
272mm
x
2
7
2
m
m
1450mm
Model
Conversion
Top/Back Back/Top
400mm
YES
1450mm
SEA 1500L-3
Corner Type
Electrical Connection
Minimum Height
(H =)
SEA 1500L-2
Condari Pty Ltd.
Filter Size
648mm
4
1200mm
LED Light
Filter Qty
SEA 1200L-2
Motor Box /
Flue Width
Motor Qty
Light Centres
Light Qty
Nightlight
Model
Body Width
Version: C 20/01/2015F
Page 2 of 2
Senator
Technical Specification Sheet
SEA
Wall Mounted
Power entry location
is the same for all
Senator models.
4
0
0
3
1
0
H
A
l
l
-
T
h
r
e
a
d
r
o
d
s
a
r
e
s
u
p
p
l
i
e
d
f
o
r
e
x
t
r
a
s
u
p
p
o
r
t
.
SENATOR - SEA
Qasair Rangehoods Installation Instructions
15
Motor Box /
Flue Width
Condari Pty Ltd. Page 1 of 4
Version: C 20/01/2015F
Body Width
Model
Motor Qty
Light Centres
Light Qty
Nightlight
LED Light
Filter Qty
Model
Filter Size
Conversion
Top/Back Back/Top
Electrical Connection
Minimum Height
(H =)
Maximum Height
(H =)
PowderKote
Available
All-thread
Fixing Centres
Corner Type
SMF 600L-1 SMF 900L-2SMF 900L-1SMF 600L-1SMF 900L-2SMF 900L-1
600mm
3
1
0
m
m
2
450mm
1
Cool
YES
2
272mm
x
3
5
5
m
m
YES
Junction Box
N/A
N/A
YES
N/A
Round
900mm
750mm
1
Cool
YES
2
510mm
3
900mm
750mm
2
Cool
YES
2
510mm
3
272mm
x
3
5
5
m
m
YES
Junction Box
N/A
N/A
YES
N/A
Round
272mm
x
3
5
5
m
m
YES
Junction Box
N/A
N/A
YES
N/A
Round
Maitland
Technical Specification Sheet
SMF
Wall Mounted
Power entry location
is the same for all
SMF models.
5
1
0
1
5
0
1
1
0
2
0
4
5
0
2
0
1
1
0
2
8
0
Ø15mm Radius
Ø15mm
Radius
MAITLAND - SMF
Qasair Rangehoods Installation Instructions16
Maitland
Technical Specification Sheet
SMF
Wall Mounted
Model
Conversion
Top/Back Back/Top
Minimum Height
(H =)
Electrical Connection
Filter Size
Body Width
Motor Box /
Flue Width
Model
Maximum Height
(H =)
SMF 1000L-2
290mm
x
3
5
5
m
m
N/A
All-thread
Fixing Centres
Corner Type
Version: C 20/01/2015F
648mm
4
Condari Pty Ltd.
Round
N/A
N/A
Round
YES
Motor Qty
Page 2 of 4
N/A
YES
Nightlight
Light Qty
850mm
1000mm
SMF 1000L-2
510mm
3
LED Light
Light Centres
Filter Qty
Junction Box
YES
SMF 1200L-2
2
SMF 1200L-2
2
YES
2
Cool
2
N/ACool
YES
1050mm
1200mm
272mm
x
3
5
5
m
m
YES
Junction Box
N/A
PowderKote
Available
2
8
0
1
1
0
2
0
4
5
0
2
0
1
1
0
1
5
0
5
1
0
Power entry location
is the same for all
SMF models.
Ø15mm Radius
Ø15mm
Radius
MAITLAND - SMF
Qasair Rangehoods Installation Instructions
17
Minimum Height
(H =)
Filter Size
Model
Conversion
Top/Back Back/Top
N/A
SMF 1500L-3
Electrical Connection
Page 3 of 4
Body Width
Motor Box /
Flue Width
Motor Qty
Model
Nightlight
Filter Qty
Light Qty
Version: C 20/01/2015F
Light Centres
Maximum Height
(H =)
Corner Type
Condari Pty Ltd.
1350mm
1500mm
SMF 1500L-2
5
LED Light
816mm
YES
N/A
YES
Junction Box
272mm
x
3
5
5
m
m
SMF 1500L-2
N/A
SMF 1800L-3
YES
YESYES
2
N/A
272mm
x
3
5
5
m
m
290mm
x
3
5
5
m
m
All-thread
Fixing Centres
PowderKote
Available
SMF 1800L-3
1800mm
1650mm
4
3
1500mm
1350mm
422mm
6
YES
5
Cool Cool
3
2
SMF 1500L-3
N/A
Round
YES
Junction BoxJunction Box
YES
N/A
Round
N/A
YES
N/A
Round
N/A
816mm
2
Cool
Maitland
Technical Specification Sheet
SMF
Wall Mounted
2
8
0
1
1
0
2
0
4
5
0
2
0
1
1
0
1
5
0
5
1
0
Power entry location
is the same for all
SMF models.
Ø15mm Radius
Ø15mm
Radius
MAITLAND - SMF
Qasair Rangehoods Installation Instructions18
Wall Mounted
Maitland
Technical Specification Sheet
SMF
SMF 600L-1
SHROUD
YES YES
SMF 900L-2
SHROUD
1450mm1450mm
SMF 1500L-3
SHROUD
300mm
Version: C 20/01/2015F
Page 4 of 4
SMF 1200L-2
SHROUD
Condari Pty Ltd.
Model
3
0
0
m
m
3
0
0
m
m
1450mm
YES
Minimum Height
(H =)
Maximum Height
(H =)
YES
Powderkote
A
v
a
i
l
a
b
l
e
300mm
1450mm
SMF 900L-1
SHROUD
YES
SMF 1000L-2
SHROUD
YES
1450mm
300mm
YES
1450mm
300mm
YES
300mm
1450mm1450mm
300mm
SMF 1500L-2
SHROUD
SMF 1800L-3
SHROUD
S
M
F
6
0
0
L
-
1
S
H
R
O
U
D
S
M
F
9
0
0
L
-
1
S
H
R
O
U
D
S
M
F
9
0
0
L
-
2
S
H
R
O
U
D
S
M
F
1
0
0
0
L
-
2
S
H
R
O
U
D
S
M
F
1
2
0
0
L
-
2
S
H
R
O
U
D
S
M
F
1
5
0
0
L
-
2
S
H
R
O
U
D
S
M
F
1
5
0
0
L
-
3
S
H
R
O
U
D
S
M
F
1
8
0
0
L
-
3
S
H
R
O
U
D
MAITLAND - SMF
Qasair Rangehoods Installation Instructions
19
Compact
Technical Specification Sheet
CM
Wall Mounted
CM 900L-2
2
3
510mm
YESYES
2
900mm
750mm
21
450mm
Cool
900mm
CM 900L-1
Cool
Light Centres
Filter Qty
Nightlight
Light Qty
LED Light
Motor Qty
Model
Body Width
Maximum Height
(H =)
Corner Type
510mm
Condari Pty Ltd.
3
All-thread
Fixing Centres
PowderKote
Available
Filter Size
Conversion
Top/Back Back/Top
Page 1 of 3
Motor Box /
Flue Width
Minimum Height
(H =)
Model
Electrical Connection
N/A
YES
CM 900L-1
272mm
x
3
5
5
m
m
Version: C 20/01/2015F
YES
N/A
Junction Box Junction Box
YES
N/A
YES
N/A
Round
N/A
Round
N/A
272mm
x
3
5
5
m
m
CM 900L-2
Power Entry
Ø15mm
Radius
5
1
0
8
0
2
0
1
1
0
4
1
5
1
1
0
2
0
2
8
0
Ø15mm
Radius
Power Entry
COMPACT - CM
Qasair Rangehoods Installation Instructions20
Compact
Technical Specification Sheet
CM
Wall Mounted
Filter Qty
Nightlight
Light Qty
Light Centres
Motor Qty
LED Light
Motor Box /
Flue Width
Model
Body Width
3
648mm
4
Conversion
Top/Back Back/Top
Condari Pty Ltd.
Maximum Height
(H =)
All-thread
Fixing Centres
Minimum Height
(H =)
Corner Type
CM 1200L-2 Model
510mm
Electrical Connection
PowderKote
Available
YES
Round
N/A
Version: C 20/01/2015F
Page 2 of 3
N/A
YES
850mm
2
1000mm
CM 1000L-2 CM 1000L-2
YES
Junction Box
290mm
x
3
5
5
m
m
N/A
N/A N/A
CM 1200L-2
Round
Junction Box
Filter Size
2
2
Cool
272mm
x
3
5
5
m
m
YES
1050mm
Cool
1200mm
2
YES
N/A
YES
Ø15mm
Radius
Ø15mm
Radius
2
8
0
2
0
1
1
0
4
1
5
1
1
0
2
0
8
0
5
1
0
Power Entry
Power Entry
COMPACT - CM
Qasair Rangehoods Installation Instructions
21
Wall Mounted
Compact
Technical Specification Sheet
CM
Condari Pty Ltd.
Version: C 20/01/2015F
Page 3 of 3
YES
Powderkote
A
v
a
i
l
a
b
l
e
YES
Maximum Height
(H =)
Minimum Height
(H =)
1450mm
335mm335mm
1450mm
Model
CM 1000L-2 SHROUD
1450mm
YES
3
3
5
m
m
CM 900L-2 SHROUD
3
3
5
m
m
CM 1200L-2 SHROUD
1450mm
YES
CM 900L-1 SHROUD
C
M
9
0
0
L
-
1
S
H
R
O
U
D
C
M
9
0
0
L
-
2
S
H
R
O
U
D
C
M
1
0
0
0
L
-
2
S
H
R
O
U
D
C
M
1
2
0
0
L
-
2
S
H
R
O
U
D
COMPACT - CM
Qasair Rangehoods Installation Instructions22
S
h
r
o
u
d
Wall Mounted
Statesman
Technical Specification Sheet
STA
Minimum Height
(H =)
Maximum Height
(H =)
Corner Type
Page 1 of 3
Version: E 29/06/2016F
All-thread
Fixing Centres
Light Qty
PowderKote
Available
Conversion
Top/Back Back/Top
Filter Size
Condari Pty Ltd.
Model
Electrical Connection
LED Light
Model
Nightlight
Filter Qty
Light Centres
Motor Qty
Round
Body Width
Motor Box /
Flue Width
STA 900L-1
403mm
900mm
510mm
YES
2
3
1
Cool
1550mm
Junction Box
415mm
YES
N/A
STA 900L-1
272mm
x
3
5
5
m
m
YES
1
5
m
m
R
a
d
i
u
s
Shroud
Power Entry
5
1
0
8
0
2
0
1
1
0
H
2
0
1
1
0
2
8
0
STA 900L-1 shown
without shroud.
STATESMAN - STA
Qasair Rangehoods Installation Instructions
23
S
h
r
o
u
d
Body Width
Motor Box /
Flue Width
Model
Motor Qty
Light Qty
LED Light
Light Centres
Filter Qty
YES
Junction Box
YES
1550mm
N/A
Round
Electrical Connection
Conversion
Top/Back Back/Top
Filter Size
Model
PowderKote
Available
Minimum Height
(H =)
Maximum Height
(H =)
Condari Pty Ltd.
All-thread
Fixing Centres
Corner Type
Version: E 29/06/2016F
740mm
272mm
x
3
5
5
m
m
STA 900L-2
Page 2 of 3
3
510mm
Nightlight
Cool
2
403mm
900mm
STA 900L-2
2
YES
Statesman
Technical Specification Sheet
STA
Wall Mounted
STA 900L-2 shown
without shroud.
Power Entry
Shroud
5
1
0
8
0
2
0
2
5
0
H
2
0
2
5
0
3
8
0
R
a
n
g
e
h
o
o
d
i
s
m
a
n
u
f
a
c
t
u
r
e
d
a
s
t
o
p
d
u
c
t
o
n
l
y
.
A
c
o
n
v
e
r
s
i
o
n
k
i
t
f
o
r
b
a
c
k
d
u
c
t
e
d
i
s
s
u
p
p
l
i
e
d
.
STATESMAN - STA
Qasair Rangehoods Installation Instructions24
S
h
r
o
u
d
YES
2
403mm
1200mm
STA 1200L-2
Cool
4
2
648mm
Version: E 29/06/2016F
Page 3 of 3
Nightlight
Condari Pty Ltd.
Minimum Height
(H =)
Maximum Height
(H =)
PowderKote
Available
STA 1200L-2
272mm
x
3
5
5
m
m
1550mm
Conversion
Top/Back Back/Top
Filter Qty
YES
Corner Type
All-thread
Fixing Centres
Electrical Connection
Model
Filter Size
Body Width
Motor Box /
Flue Width
LED Light
Motor Qty
Model
Light Qty
Light Centres
Junction Box
740mm
Round
YES
N/A
Wall Mounted
Statesman
Technical Specification Sheet
STA
3
8
0
2
5
0
2
0
H
2
5
0
2
0
8
0
5
1
0
R
a
n
g
e
h
o
o
d
i
s
m
a
n
u
f
a
c
t
u
r
e
d
a
s
t
o
p
d
u
c
t
o
n
l
y
.
A
c
o
n
v
e
r
s
i
o
n
k
i
t
f
o
r
b
a
c
k
d
u
c
t
e
d
i
s
s
u
p
p
l
i
e
d
.
STA 1200L-2 shown
without shroud.
Power Entry
Shroud
STATESMAN - STA
Qasair Rangehoods Installation Instructions
25
STAFFORD - STF
Stafford
Technical Specification Sheet
STF
Wall Mounted
Motor Box /
Flue Width
Body Width
LED Light
Motor Qty
Model
PowderKote
Available
Maximum Height
(H =)
403mm
STF 900L-2
900mm
Cool
STF 1200L-2
4
648mm
All-thread
Fixing Centres
Corner Type
Condari Pty Ltd.
Light Centres
Light Qty
Nightlight
Page 1 of 1
Filter Qty
Electrical Connection
Conversion
Top/Back Back/Top
Model
Minimum Height
(H =)
740mm
YES
Junction Box
272mm
x
3
5
5
m
m
STF 900L-2
3
510mm
YES
N/A
1280mm
Square
N/A
Square
1280mm
N/A
Junction Box
Version: C 20/01/2015F
N/A
22
YES
403mm
Cool
2
1200mm
2
Filter Size
272mm
x
3
5
5
m
m
740mm
STF 1200L-2
YES
STF 900L-2 shown
without shroud.
STF 1200L-2 shown
without shroud.
Shroud
Shroud
Power Entry
8
0
2
0
2
5
0
H
2
5
0
3
8
0
Shroud
Shown with Shroud
Rangehood is manufactured as top ducted only. A conversion kit for back ducted is supplied.
5
1
0
Power Entry
2
0
Qasair Rangehoods Installation Instructions26
Integra
Technical Specification Sheet
IN
Wall Mounted
Motor Box /
Flue Width
Body Width
LED Light
Motor Qty
Model
PowderKote
Available
Maximum Height
(H =)
N/A
IN 600L-1
600mm
Cool
IN 900L-2
3
285mm
All-thread
Fixing Centres
Corner Type
Condari Pty Ltd.
Light Centres
Light Qty
Nightlight
Page 1 of 2
Filter Qty
Electrical Connection
Conversion
Top/Back Back/Top
Model
Minimum Height
(H =)
N/A
YES
R
e
m
o
t
e
S
w
i
t
c
h
i
n
g
272mm
x
3
5
5
m
m
IN 600L-1
2
Centre
NO
N/A
N/A
Square
N/A
Square
N/A
N/A
Remote Switching
Version: A 28/11/2014F
N/A
12
NO
N/A
Cool
2
900mm
1
Filter Size
272mm
x
3
5
5
m
m
N/A
IN 900L-2
YES
6
0
0
2
0
1
1
0
2
0
1
1
0
3
0
0
1
0
0
7
0
Power entry locations
are the same for all
Integra models.
INTEGRA - IN
Qasair Rangehoods Installation Instructions
27
Integra
Technical Specification Sheet
IN
Wall Mounted
Version: A 28/11/2014F
N/A
Square
N/A
Square
N/A
N/A
Remote Switching
IN 1200L-3
YES
272mm
x
3
5
5
m
m
N/A
IN 1200L-2
YES
272mm
x
3
5
5
m
m
Page 2 of 2
N/A
N/A
N/A
Remote Switching
Body Width
Motor Box /
Flue Width
Nightlight
Motor Qty
LED Light
Light Qty
N/A
2
Cool
NO
2
N/A
3
Cool
NO
4
560mm
2
IN 1200L-3
1200mm
Model
1200mm
IN 1200L-2
Filter Qty
4
Light Centres
560mm
Condari Pty Ltd.
Corner Type
PowderKote
Available
Conversion
Top/Back Back/Top
Filter Size
Model
Electrical Connection
Maximum Height
(H =)
All-thread
Fixing Centres
Minimum Height
(H =)
Power entry locations
are the same for all
Integra models.
6
0
0
2
0
1
1
0
7
0
1
0
0
2
0
1
1
0
3
0
0
INTEGRA - IN
Qasair Rangehoods Installation Instructions28
INSTALLATION INSTRUCTIONS
• BRH / LAM
• BAR
• MAR
• MAJ
• FAS
1. Remove hood from packaging being careful not to touch stainless steel front.
2. Locate centre of stove and using level or plumb line, mark centre line up to ceiling.
3. Measure height of hood and mark same distance down from ceiling with level line.
4. Mark where ducting needs to be cut either on wall or ceiling, check for wires and timber, then cut hole for ducting.
5. Locate solid fixing points on wall (This hood is very heavy and requires good solid fixing points). If necessary fit
some solid fixing timber to wall behind hood now.
6. Mark fixing points on rear of hood and drill fixing holes to take solid screws.
7. Drill hole in rear or top of the hood to take electrical cable.
8. It may be easier to remove fans for easier fixing and weight when installing.
9. If you do not have adjustable stands you can cut some temporary timber props to sit canopy on when you lift into
position, to hold it while you fit fixing screws.
10. You need two people to lift this canopy into position. * Do not attempt this on your own, as you could cause
yourself injury and damage the hood or stove. CAUTION: Do not under any circumstances lift from the front of
the hood or put any pressure on the front face as you will damage the hood permanently.
11. Carefully lift hood into position and sit on stands to level hood, then screw hood into position through fixing holes.
Make sure you put fixing holes high up in the hood to stop it falling forward.
12. Fit ducting to hood to the outside atmosphere as required either through the roof with appropriate flashing by a
plumber or through the rear wall vent, which needs to be siliconed to the rear of the hood. Always use approved
ducting and seal all duct joins with duct tape or silicone.
13. An electrician should make the electrical connection to the hood by connecting to the 10 AMP junction box.
Ensure power is turned off during this procedure.
14. Refit fans to hood, insert filters and test.
Handy hints: Sometimes it is easier to lift the hood with a person in the roof space pulling up on a rope attached to a
wooden block placed inside base of hood and a second person down the bottom guiding the hood into position.
Installation must be carried out by the procedure outlined.
Failure to do so may void the guarantee.
Electrical: Wiring to the appliance must comply with State and local Regulations.
Connection to be carried out by a registered electrician.
Qasair Rangehoods Installation Instructions
29
Motor Box /
Flue Width
Condari Pty Ltd. Page 1 of 2
Version: C 20/01/2015F
Body Width
Model
Motor Qty
Light Centres
Light Qty
Nightlight
LED Light
Filter Qty
Model
Filter Size
Conversion
Top/Back Back/Top
Electrical Connection
Minimum Height
(H =)
Maximum Height
(H =)
PowderKote
Available
All-thread
Fixing Centres
Corner Type
BRH 600L-1 BRH 900L-2BRH 900L-1BRH 600L-1BRH 900L-2BRH 900L-1
600mm
310mm
2
N/A
1
Cool
YES
2
272mm
x
3
5
5
m
m
NO
Junction Box
400mm
1450mm
YES
500mm
Square
900mm
N/A
1
Cool
YES
2
510mm
3
900mm
N/A
2
Cool
YES
2
510mm
3
272mm
x
3
5
5
m
m
NO
Junction Box
400mm
1450mm
YES
800mm
Square
272mm
x
3
5
5
m
m
NO
Junction Box
400mm
1450mm
YES
800mm
Square
Benton
Technical Specification Sheet
BRH
Wall Mounted
Power entry location
is the same for all
Benton models.
5
1
0
H
A
l
l
-
T
h
r
e
a
d
r
o
d
s
a
r
e
s
u
p
p
l
i
e
d
f
o
r
e
x
t
r
a
s
u
p
p
o
r
t
.
BENTON - BRH
Qasair Rangehoods Installation Instructions30
Benton
Technical Specification Sheet
BRH
Wall Mounted
BRH 1200L-2
2
3
510mm
YESYES
2
1200mm
N/A
22
N/A
Cool
1000mm
BRH 1000L-2
Cool
Light Centres
Filter Qty
Nightlight
Light Qty
LED Light
Motor Qty
Model
Body Width
Maximum Height
(H =)
Corner Type
648mm
Condari Pty Ltd.
4
All-thread
Fixing Centres
PowderKote
Available
Filter Size
Conversion
Top/Back Back/Top
Page 2 of 2
Motor Box /
Flue Width
Minimum Height
(H =)
Model
Electrical Connection
400mm
NO
BRH 1000L-2
290mm
x
3
5
5
m
m
Version: C 20/01/2015F
YES
1450mm
Junction Box Junction Box
NO
1450mm
YES
400mm
Square
800mm
Square
950mm
272mm
x
3
5
5
m
m
BRH 1200L-2
Power entry location
is the same for all
Benton models.
5
1
0
7
5
2
5
0
H
2
0
2
5
0
A
l
l
-
T
h
r
e
a
d
r
o
d
s
a
r
e
s
u
p
p
l
i
e
d
f
o
r
e
x
t
r
a
s
u
p
p
o
r
t
.
BENTON - BRH
Qasair Rangehoods Installation Instructions
31
Lamont
Technical Specification Sheet
LAM
Wall Mounted
NO
LAM 900L-1
Junction Box
272mm
x
3
5
5
m
m
LAM 900L-2
272mm
x
3
5
5
m
m
NO
Junction Box
800mm
Square
Page 1 of 2
N/A
1100mm
Square
800mm
1100mm
400mm400mm
Maximum Height
(H =)
Conversion
Top/Back Back/Top
Electrical Connection
Filter Size
Model
N/A
Version: B 20/01/2015
F
Minimum Height
(H =)
PowderKote
Available
All-thread
Fixing Centres
900mm
LAM 900L-2
N/A
510mm
2
Cool
3
2
YES
Body Width
Motor Qty
Motor Box /
Flue Width
Model
900mm
Cool
N/A
LAM 900L-1
Light Qty
Condari Pty Ltd.
Corner Type
Light Centres
Filter Qty
LED Light
Nightlight
1
510mm
3
YES
2
Power entry location
is the same for all
Lamont models.
5
1
0
H
A
l
l
-
T
h
r
e
a
d
r
o
d
s
a
r
e
s
u
p
p
l
i
e
d
f
o
r
e
x
t
r
a
s
u
p
p
o
r
t
.
LAMONT - LAM
Qasair Rangehoods Installation Instructions32
Lamont
Technical Specification Sheet
LAM
Wall Mounted
LAM 1200L-2
2
3
510mm
YESYES
2
1200mm
N/A
22
N/A
Cool
1000mm
LAM 1000L-2
Cool
Light Centres
Filter Qty
Nightlight
Light Qty
LED Light
Motor Qty
Model
Body Width
Maximum Height
(H =)
Corner Type
648mm
Condari Pty Ltd.
4
All-thread
Fixing Centres
PowderKote
Available
Filter Size
Conversion
Top/Back Back/Top
Page 2 of 2
Motor Box /
Flue Width
Minimum Height
(H =)
Model
Electrical Connection
400mm
NO
LAM 1000L-2
290mm
x
3
5
5
m
m
Version: B 20/01/2015F
N/A
1100mm
Junction Box Junction Box
NO
1100mm
N/A
400mm
Square
800mm
Square
950mm
272mm
x
3
5
5
m
m
LAM 1200L-2
Power entry location
is the same for all
Lamont models.
5
1
0
7
5
2
5
0
H
2
0
2
5
0
A
l
l
-
T
h
r
e
a
d
r
o
d
s
a
r
e
s
u
p
p
l
i
e
d
f
o
r
e
x
t
r
a
s
u
p
p
o
r
t
.
LAMONT - LAM
Qasair Rangehoods Installation Instructions
33
Barclay
Technical Specification Sheet
BAR
Wall Mounted
Light Centres
Filter Qty
All-thread
Fixing Centres
Varies depending on
length of rangehood
Varies depending on
length of rangehood
Corner Type
Page 1 of 1
PowderKote
Available
Condari Pty Ltd.
Varies depending on
length of rangehood
YES
Varies depending on
length of rangehood
Nightlight
Light Qty
Varies depending on
length of rangehood
Varies depending on
length of rangehood
1800mm-2400mm
Model BAR 2400-3000L-2
900mm,1000mm,1200mm
Model
Body Width
LED Light
2
Junction Box
550mm
Motor Qty
1550
m
m
YES
CoolCool
2
Filter Size2400mm-3000mm
BAR 1800-2400L-2
900mm,1000mm,1200mm
Conversion
Top/Back Back/Top
Motor Box /
Flue Width
N/A
Square
Version: B 20/01/2015F
Junction Box
N/A
Square
BAR 1800-2400L-2
Varies depending on
length of rangehood
NO
N/A
BAR 2400-300L-2
NO
Maximum Height
(H =)
Electrical Connection
Minimum Height
(H =)
N/A
Varies depending on
length of rangehood
1550mm
550mm
5
1
0
H
2
0
2
5
0
7
5
2
5
0
Power entry location
is the same for all
Barclay models.
Motor Box can be
either L/H or R/H.
1
0
0
O
p
t
i
o
n
a
l
D
e
s
i
g
n
BARCLAY - BAR
Qasair Rangehoods Installation Instructions34
Motor Box /
Flue Width
Condari Pty Ltd. Page 1 of 2
Version: A 01/07/2014F
Body Width
Model
Motor Qty
Light Centres
Light Qty
Nightlight
LED Light
Filter Qty
Model
Filter Size
Conversion
Top/Back Back/Top
Electrical Connection
Minimum Height
(H =)
Maximum Height
(H =)
PowderKote
Available
All-thread
Fixing Centres
Corner Type
MAR 900L-1 MAR 1200L-2MAR 900L-2MAR 900L-1MAR 1200L-2MAR 900L-2
900mm
4
2
2
m
m
2
N/A
1
Cool
YES
2
422mm
x
2
7
2
m
m
NO
Junction Box
N/A
N/A
N/A
N/A
Square
900mm
N/A
2
Cool
YES
2
422mm
2
1200mm
N/A
2
Cool
YES
2
544mm
4
422mm
x
2
7
2
m
m
NO
Junction Box
N/A
N/A
N/A
N/A
Square
272mm
x
2
7
2
m
m
NO
Junction Box
N/A
N/A
N/A
N/A
Square
Martell
Technical Specification Sheet
MAR
Wall Mounted
Power entry location
is the same for all
Martell models.
5
1
0
5
0
0
1
1
0
2
0
2
0
3
0
0
1
1
0
1
4
8
7
0
0
MARTELL - MAR
Qasair Rangehoods Installation Instructions
35
Martell
Technical Specification Sheet
MAR
Wall Mounted
Model
Conversion
Top/Back Back/Top
Minimum Height
(H =)
Electrical Connection
Filter Size
Body Width
Motor Box /
Flue Width
Model
Maximum Height
(H =)
MAR 1500L-3
272mm
x
2
7
2
m
m
N/A
All-thread
Fixing Centres
Corner Type
Version: A 01/07/2014F
422mm
4
Condari Pty Ltd.
Square
N/A
N/A
Square
N/A
Motor Qty
Page 2 of 2
N/A
N/A
Nightlight
Light Qty
N/A
1500mm
MAR 1500L-3
816mm
5
LED Light
Light Centres
Filter Qty
Junction Box
NO
MAR 1800L-3
3
MAR 1800L-3
3
YES
2
Cool
4
N/ACool
YES
N/A
1800mm
422mm
x
2
7
2
m
m
NO
Junction Box
N/A
PowderKote
Available
Power entry location
is the same for all
Martell models.
1
4
8
1
1
0
3
0
0
2
0
2
0
1
1
0
5
0
0
5
1
0
7
0
0
MARTELL - MAR
Qasair Rangehoods Installation Instructions36
Majestic
Technical Specification Sheet
MAJ Wall Mounted
2
350mm
Minimum Height
(H =)
Light Centres
Light Qty
900mm
MAJ 900L-1
LED Light
Conversion
Top/Back Back/Top
Nightlight
3
Condari Pty Ltd.
Filter Qty
3
Motor Qty
Motor Box /
Flue Width
600mm
Version: B 29/11/2014F
Body Width
Model MAJ 900L-1
Page 1 of 2
Filter Size
272mm
x
2
7
2
m
m
NO
MAJ 900L-2
Square Square
600mm
MAJ 1000L-2
600mm
N/A
1150mm
Maximum Height
(H =)
PowderKote
Available
Corner Type
Electrical Connection
N/A
All-thread
Fixing Centres
1000mm
N/A
Cool
22
MAJ 900L-2
Cool
350mm
22
350mm
YES
Junction Box
NO
Junction Box
1150mm 1150mm
NO
N/A
Square
600mm 600mm
422mm
x
2
7
2
m
m
272mm
x
2
7
2
m
m
600mm
Junction Box
ModelMAJ 1000L-2
YESYES
1
N/A
Cool
N/A
900mm
2
H
3
0
0
5
0
0
Power entry location
is the same for all
Majestic models.
1
5
0
A
l
l
-
T
h
r
e
a
d
r
o
d
s
a
r
e
s
u
p
p
l
i
e
d
f
o
r
e
x
t
r
a
s
u
p
p
o
r
t
.
MAJESTIC - MAJ
Qasair Rangehoods Installation Instructions
37
Majestic
Technical Specification Sheet
MAJ Wall Mounted
272mm
x
2
7
2
m
m
MAJ 1500L-2
Conversion
Top/Back Back/Top
Filter Size
Model
1500mm
N/A
Page 2 of 2Condari Pty Ltd.
YES
Minimum Height
(H =)
PowderKote
Available
NO
MAJ 1500L-2
N/A
600mm
5
2
Cool
22
2
YES
Cool
1200mm
4
Motor Box /
Flue Width
Model
LED Light
Light Centres
Filter Qty
500mm
Maximum Height
(H =)
Electrical Connection
800mm
1150mm
N/A
Junction Box
Version: B 29/11/2014F
1150mm
Junction Box
600mm
All-thread
Fixing Centres
Corner Type
Square
1100mm
Square
N/A
600mm
272mm
x
2
7
2
m
m
NO
MAJ 1200L-2MAJ 1200L-2
Body Width
Nightlight
Motor Qty
Light Qty
Power entry location
is the same for all
Majestic models.
5
0
0
3
0
0
H
1
5
0
A
l
l
-
T
h
r
e
a
d
r
o
d
s
a
r
e
s
u
p
p
l
i
e
d
f
o
r
e
x
t
r
a
s
u
p
p
o
r
t
.
MAJESTIC - MAJ
Qasair Rangehoods Installation Instructions38
Fasano
Technical Specification Sheet
FAS
Wall Mounted
Light Centres
Filter Qty
All-thread
Fixing Centres
648mm
4
Corner Type
Page 1 of 1
PowderKote
Available
Condari Pty Ltd.
2
YES
510mm
Nightlight
Light Qty
3
2
900mm
Model FAS 1200L-2
N/A
Model
Body Width
LED Light
2
Junction Box
700mm
Motor Qty
1400
m
m
YES
CoolCool
2
Filter Size1200mm
FAS 900L-2
N/A
Conversion
Top/Back Back/Top
Motor Box /
Flue Width
300mm
x
5
0
0
m
m
Square
Version: C 20/01/2015F
Junction Box
300mm
x
8
0
0
m
m
Square
FAS 900L-2
272mm
x
3
5
5
m
m
NO
YES
FAS 1200L-2
NO
Maximum Height
(H =)
Electrical Connection
Minimum Height
(H =)
YES
272mm
x
3
5
5
m
m
1400mm
700mm
Power entry location
is the same for all
Fasano models.
5
1
0
2
5
0
2
5
0
7
5
5
0
3
6
0
H
All-Thread rods are supplied for extra support
.
FASANO - FAS
Qasair Rangehoods Installation Instructions
39
REMOTE SWITCHING SPECIFICATIONS
3 FAN (no lights)
1. Wiring to the appliance must comply with State and local regulations.
2. Switching is not provided with this unit. - The order was for the controls to be separate from the unit.
3. You may use any switching to connect the rangehood (e.g. Clipsal switches).
4. All fans must be controlled by at least one ON/OFF and one HI/LO switch.
(i.e. single or twin motor models).
5. Please refer to Wiring Diagram below for detailed wiring information.
DRAWING NUMBER
CIRCUIT DIAGRAM
DESIGNER
CHECKED
M. Malesevic REVISION
CONDARI PTY LTD
DATE
8 Argent Place, Ringwood VIC 3134
Ph: (03) 9873 5877 / Fx: (03) 9873 5748
REM SW 3 FAN
REMOTE SWITCH 3 FAN
A
22/08/2013
BROWN
BLUE
BLUE
BLACK
BROWN
M. Brewin
BLACK
BLUE
BLUE
BROWN BROWN
WHITE
GREEN
WHITE
GREEN
JUNCTION
BOXES
-------------------- CABLES TO REMOTE SWITCHES --------------------
NOTES:-
1. IT IS NECESSARY TO PROVIDE
AN ON/OFF AND A HIGH/LOW
SWITCH FOR EACH FAN.
2. THE WIRING FOR THE FANS ARE 4 CORE -
LOW SPEED - BROWN
HIGH SPEED - WHITE
NEUTRAL - BLUE
EARTH - GREEN
BROWN
BLUE
BROWN
BLACK
BLUE
WHITE
GREEN
JUNCTION
BOXES
www.condari.com.au
WIRING DIAGRAM
For further information, please contact Condari Pty Ltd
phone: 03 9482 7088 fax: 03 9482 7011
NOTE: This diagram is for reference only. A qualied elecrician must connect remote
switching to rangehood.
Reected in this drawing is the most common method of connecting the rangehood.
Be aware that Active voltage must NOT be applied to both the ‘White- High’ or
‘Brown-Low’ wires at the same time. This will cause the fan to fail.
ALL FANS MUST BE CONTROLLED
BY AT LEAST ONE ON/OFF AND
ONE HI/LO SWITCH.
Qasair Rangehoods Installation Instructions40
REMOTE SWITCHING SPECIFICATIONS
3 FAN, LED and NIGHTLIGHT
1. Wiring to the appliance must comply with State and local regulations.
2. Switching is not provided with this unit. - The order was for the controls to be separate from the unit.
3. You may use any switching to connect the rangehood (e.g. Clipsal switches).
4. All fans must be controlled by at least one ON/OFF and one HI/LO switch.
(i.e. single or twin motor models).
5. Please refer to Wiring Diagram below for detailed wiring information.
www.condari.com.au
WIRING DIAGRAM
For further information, please contact Condari Pty Ltd
phone: 03 9482 7088 fax: 03 9482 7011
NOTE: This diagram is for reference only. A qualied elecrician must connect remote
switching to rangehood.
Reected in this drawing is the most common method of connecting the rangehood.
Be aware that Active voltage must NOT be applied to both the ‘White- High’ or
‘Brown-Low’ wires at the same time. This will cause the fan to fail.
ALL FANS MUST BE CONTROLLED
BY AT LEAST ONE ON/OFF AND
ONE HI/LO SWITCH.
Qasair Rangehoods Installation Instructions
41
REMOTE SWITCHING SPECIFICATIONS
3 FAN with LED
1. Wiring to the appliance must comply with State and local regulations.
2. Switching is not provided with this unit. - The order was for the controls to be separate from the unit.
3. You may use any switching to connect the rangehood (e.g. Clipsal switches).
4. All fans must be controlled by at least one ON/OFF and one HI/LO switch.
(i.e. single or twin motor models).
5. Please refer to Wiring Diagram below for detailed wiring information.
AC1 AC2
LED
AC2
AC1
LED
BLUE
BLUE
BROWN
BLUE
BROWN
BLUE
BROWN
DRAWING NUMBER
CIRCUIT DIAGRAM
DESIGNER
CHECKED
M. Malesevic REVISION
CONDARI PTY LTD
DATE
8 Argent Place, Ringwood VIC 3134
Ph: (03) 9873 5877 / Fx: (03) 9873 5748
REM SW 3 FAN LED
REMOTE SWITCH 3 FAN LED
A
22/08/2013
BROWN
BLUE
BLUE
BLACK
BROWN
M. Brewin
BLACK
BLUE
BLUE
BROWN
BROWN
WHITE
GREEN
WHITE
GREEN
JUNCTION
BOXES
-------------------- CABLES TO REMOTE SWITCHES --------------------
NOTES:-
1. IT IS NECESSARY TO PROVIDE
AN ON/OFF AND A HIGH/LOW
SWITCH FOR EACH FAN.
2. THE WIRING FOR THE FANS ARE 4 CORE -
LOW SPEED - BROWN
HIGH SPEED - WHITE
NEUTRAL - BLUE
EARTH - GREEN
3. THE WIRING FOR THE LIGHTS IS 2 CORE -
ACTIVE - BROWN
NEUTRAL - BLUE
BROWN
BLUE
BROWN
BLUE
JUNCTION
BOXES
BLUE
BROWN
WHITE
GREEN
BLACK
BLUE
BROWN
JUNCTION
BOXES
www.condari.com.au
WIRING DIAGRAM
For further information, please contact Condari Pty Ltd
phone: 03 9482 7088 fax: 03 9482 7011
NOTE: This diagram is for reference only. A qualied elecrician must connect remote
switching to rangehood.
Reected in this drawing is the most common method of connecting the rangehood.
Be aware that Active voltage must NOT be applied to both the ‘White- High’ or
‘Brown-Low’ wires at the same time. This will cause the fan to fail.
ALL FANS MUST BE CONTROLLED BY
AT LEAST ONE ON/OFF AND ONE
HI/LO SWITCH.
Qasair Rangehoods Installation Instructions42
I/I: Inside to Inside Measurement
SINGLE MOTOR DUCTING
NOTE:
This Zinc Alume Strip is provided to join some duct pieces together.
It will be clearly shown on the drawing of the piece it is supplied with.
110. DD-1H L
Duct Director Single Motor Horizontal Left
102. HB-1
Horizontal Bend Single Motor 90º
101. DL-1 Single Motor Duct Length 1200mm
DL-1 CB Single Motor Duct
Length
1200mm Colourbond
105. BD/WV-H-1 SS
Back Draft Wall Vent Single Motor Horizontal
445M2 Stainless Steel
106. VB-1
Vertical Bend Single Motor 90º
104. BD/WV-H-1
Back Draft Wall Vent Single Motor Horizontal
See alternative Duct Piece No. 145
108. BD/WV-V-1
Back Draft Wall Vent Single Motor
Vertical
107. VB-1/45
Vertical Bend Single Motor 45º
109. BD/WV-V-1 SS
Back Draft Wall Vent Single Motor Vertical
445M2 Stainless Steel
103. HB-1/45
Horizontal Bend Single Motor 45º
101. DL-1 E
Single Motor Duct Length Extension
101. DL-1 A
Single Motor Duct Length 300mm
Qasair Rangehoods Installation Instructions
43
SINGLE MOTOR DUCTING
120. DR-200/90
200Ø Bend 90º
122. BD/WV-200Ø
Back Draft Wall Vent
123. CH-200
Chairman’s Hat 200Ø
124. CH-200 CB
Chairman’s Hat 200Ø Colourbond
125. BD/RC-1
Back Draft Roof Cowl Single Motor
121. BD-6/7/9-WV-R/R
Back Draft Wall Vent Rear Register Kit to
Suit 6/7/900H
112. TT-1
Twisted Transition Single Motor
113. DLE-DLE
Flue Joiner Single Motor
119. DR-200/45
200Ø Bend 45º
116. TR-1
Single Motor Transition DL-1 to 200Ø
117. DR-200
Duct Length 200Ø
118. DR-200 CB
Duct Length 200Ø Colourbond
115. CD-920 TO DL-1
Cavity Duct to DL-1
114. CD-920
Cavity Duct Extendible
111. DD-1H R
Duct Director Single Motor Horizontal
Right
Qasair Rangehoods Installation Instructions44
SINGLE MOTOR DUCTING
138. RCP 200 SS
Roof Cap 200Ø 445M2 Stainless Steel
137. WVC-6/7/9H-R/R
Wall Vent Cover to Suit Rear Register Kit
for 6/7/900H
133. WVC-V-1
Wall Vent Cover Single Motor Vertical
136. EV/DL-1
Eave Vent to Suit DL-1
132. WVC-H-1 SS
Wall Vent Cover Single Motor Horizontal
445M2 Stainless Steel
134. WVC-V-1 SS
Wall Vent Cover Single Motor Vertical
445M2 Stainless Steel
135. 6/7/900H-SC
Spiggot Cap to Suit 6/7/900H
130. CF 6/7/900H
Ceiling Flange to Suit 6/7/900H
131. WVC-H-1
Wall Vent Cover Single Motor Horizontal
See alternative Duct Piece No. 145
139. RC 200 SS
Roof Cowl 200Ø 445M2 Stainless Steel
140. RC 200
Roof Cowl 200Ø
127. BD/SQ-RC 200
Back Draft Roof Cowl Single Motor 200Ø
128. DLE-S/S CAP
Stainless Steel Flue Cap to Suit DLE
129. BD/M-1
Back Draft Damper Single Motor
126. BD/RC-1 CB
Back Draft Roof Cowl Single Motor
Colourbond
Qasair Rangehoods Installation Instructions
45
WALL VENT
144. FRWV-V-1 SS
Fire Rated Wall Vent Vertical
445M2 Stainless Steel
143. FRWV-H-1 SS
Fire Rated Wall Vent Horizontal
445M2 Stainless Steel
142. FRC 200 SS
Fire Rated 200Ø Roof Cowl
445M2 Stainless Steel
141. RC 1 SS
Roof Cowl Single Motor 445M2 Stainless Steel
WALL VENT
145. BD/WV/K-H-1
Back Draft Wall Vent & Cover Single Motor
Horizontal kit assembled as one piece
BDWVK-H-1
400
75
150
250
2
4
0
I
/
I
1
1
0
I
/
I
7
5
1
5
0
2
5
0
3
1
7
2
4
8
3
1
8
I
/
I
All the above ducting pieces
are all made in stainless
steel type 445M2 which
has a chromium content of
22% which is far greater
than marine grade stainless
steel and provides better
protection.
This is stated on the
description of each piece in
the ducting brochure.
ROOF COWLS, WALL VENTS
AND WALL VENT COVERS
WALL VENT
The wall vent covers have
stainless steel screening
type 316 and meets the
requirements for stainless
steel screening under the
Australian Standard.
AS 3959-2009 Construction
of Buildings in Bushfire
prone areas.
WALL VENT COVERS SPECIFICATIONS
FIRE RATED APPROVED
Qasair Rangehoods Installation Instructions46
I/I: Inside to Inside Measurement
TWIN MOTOR DUCTING
NOTE:
This Zinc Alume Strip is provided to join some duct
pieces together. It will be clearly shown on the drawing
of the piece it is supplied with.
212. DLE-2 TO DLE-2
Flue Joiner Twin Motor
210. BD/WV-V-2 SS
Back Draft Wall Vent Twin Motor Vertical
445M2 Stainlerss Steel
209. BD/WV-V-2
Back Draft Wall Vent Twin Motor Vertical
203. HB-2
Horizontal Bend Twin Motor 90º
208. VB-2/45
Vertical Bend Twin Motor 45º
207. VB-2
Vertical Bend Twin Motor 90º
206. BD/WV-H-2 SS
Back Draft Wall Vent Twin Motor Horizontal
445M2 Stainless Steel
205. BD/WV-H-2
Back Draft Wall Vent Twin Motor
Horizontal
204. HB-2/45
Horizontal Bend Twin Motor 45º
202. DL-2
Twin Motor Duct Length 1200mm
201. TMT
Twin Motor Transition
211. TT-2
Twisted Transition Twin Motor
Qasair Rangehoods Installation Instructions
47
TWIN MOTOR DUCTING
224. HB-250
Horizontal Bend 250SQ 90º
223. DL-250
Duct Length 250SQ
222. TMT-250
Twin Motor Transition to 250SQ
220. DL-2/250SQ
Twin Motor Transition DL-2 to 250SQ
221. TMT-250/300
Twin Motor Transition 250SQ to 300Ø
219. DR-300/90
300Ø Bend 90º
225. HB-250/45
Horizontal Bend 250SQ 45º
226. TMT-250/90 L
Duct Deflector 250SQ Left
227. TMT-250/90 R
Duct Deflector 250SQ Right
218. DR-300/45
300Ø Bend 45º
217. DR-300 CB
Duct Length 300Ø Colourbond
216. DR-300
Duct Length 300Ø
215. TR-2
Twin Motor Transition from DL-2 to 300Ø
214. TMT-300
Twin Motor Transition to 300Ø
213. BD-10/12/15-WV-R/R
Back Draft Wall Vent 10/12/1500H
Qasair Rangehoods Installation Instructions48
TWIN MOTOR DUCTING
232. CH-300
Chairman’s Hat 300Ø
233. CH-300 CB
Chairman’s Hat 300Ø Colourbond
234. BD/SQ-RC 300
Back Draft Roof Cowl 300Ø
236. DLE-2-S/S CAP
Stainless Steel Flue Cap to Suit DLE-2
237. CF 10/12/1500H
Ceiling Flange to Suit 10/12/1500H
235. BD/RC-250 SQ
Back Draft Roof Cowl 250SQ
239. CF 3F-1200-2
Ceiling Flange tp suit 3F 1200-2
240. CF 4F-900-2
Ceiling Flange to Suit 4F 900-2
238. CF 3F-900-2
Ceiling Flange to Suit 3F 900-2
230 BD/RC-2
Back Draft Roof Cowl Twin Motor
229. BD/WV-250 SQ SS
Back Draft Wall 250SQ 445M2 Stainless
Steel
231. BD/RC-2 CB
Back Draft Roof Cowl Twin Motor
Colourbond
242. WVC-H-2
Wall Vent Cover Twin Motor Horizontal
241. CF 4F-1200-2
Ceiling Flange to suit 4F 1200-2
228. BD/WV-250 SQ
Back Draft Wall Vent 250SQ
Qasair Rangehoods Installation Instructions
49
TWIN MOTOR DUCTING
244. WVC-V-2
Wall Vent Cover Twin Motor Vertical
245. WVC-V-2 SS
Wall Vent Cover Twin Motor Vertical
445M2 Stainless Steel
246. WVC-250 SQ
Wall Vent Cover 250SQ
250. DD-2H-L
Duct Director Twin Motor Horizontal Left
248. WVC-10/12/15H-R/R
Wall Vent Cover to suit 10/12/1500H
247. WVC-250 SQ SS
Wall Vent Cover 250SQ 445M2 Stainless
Steel
249. 10/12/15H-SC
Spiggot Cap to Suit 10/12/1500H
253. DD-2V-R
Duct Director Twin Motor Vertical Right
254. EV/DL-2
Eave Vent to Suit DL-2
256. BD/WV-300Ø
Back Draft Wall Vent
257. BD/WVC-SBS
Twin Motor Wall Vent Deflector
255. BD/M-250SQ
Back Draft Damper Twin Motor 250SQ
243.WVC-H-2 SS
Wall Vent Cover Twin Motor Horizontal
445M2 Stainless Steel
251. DD-2H-R
Duct Director Twin Motor Horizontal Right
252. DD-2V-L
Duct Director Twin Motor Vertical Left
Qasair Rangehoods Installation Instructions50
TWIN MOTOR DUCTING
FRBDWVK-H-2
9
5
2
4
0
I
/
I
1
1
0
I
/
I
75
400
150 210
250
EXTENDED
COMPRESSED
2
5
0
1
5
0
6
5
3
I
/
I
6
5
2
2
4
8
7
5
268. FRWV/K-H-2
Kit assembled as one piece. Fire rated Two
Single Motor Back Draft Wall Vent Horizontal
with telescopic length & cover
BDWVK-H-2
250
75
150 210
400
2
4
0
I
/
I
1
1
0
I
/
I
9
5
EXTENDED
COMPRESSED
6
5
2
2
4
8
6
5
3
I
/
I
2
5
0
7
5
1
5
0
267. BD/WV/K-H-2
Kit assembled as one piece. Two Single Motor
Back Draft Wall Vent Horizontal
with telescopic length & cover
261. RC 300 SS
Roof Cowl 300Ø 445M2 Stainless Steel
262. RC 2 SS
Roof Cowl Twin Motor 445M2 Stainless
Steel
258. CF 3F-1500-2
Ceiling Flange to Suit 3F 1500-2
259. RCP 300 SS
Roof Cap 300Ø 445M2 Stainless Steel
260. RV 300 SS
Roof Ventilation Cowl 300Ø 445M2
Stainless Steel
263. FRC 300 SS
Fire Rated Roof Cowl 300Ø
445M2 Stainless Steel
WALL VENT
265. FRWV-V-2 SS
Fire Rated Wall Vent Twin Motor Vertical
445M2 Stainless Steel
266. FRWV-250 SQ SS
Fire Rated Wall Vent Twin Motor 250SQ
445M2 Stainless Steel
WALL VENTWALL VENT
264. FRWV-H-2 SS
Fire Rated Wall Vent Twin Motor Horizontal
445M2 Stainless Steel
WALL VENTWALL VENT
All the above ducting pieces
are all made in stainless
steel type 445M2 which
has a chromium content of
22% which is far greater
than marine grade stainless
steel and provides better
protection.
This is stated on the
description of each piece in
the ducting brochure.
ROOF COWLS, WALL VENTS
AND WALL VENT COVERS
The wall vent covers have
stainless steel screening
type 316 and meets the
requirements for stainless
steel screening under the
Australian Standard.
AS 3959-2009 Construction
of Buildings in Bushfire
prone areas.
WALL VENT COVERS SPECIFICATIONS
FIRE RATED APPROVED
Qasair Rangehoods Installation Instructions
51
NOTE:
This Zinc Alume Strip is provided to join some duct pieces together.
It will be clearly shown on the drawing of the piece it is supplied with.
I/I: Inside to Inside Measurement
TRIPLE MOTOR DUCTING
306. VB-3/45
Vertical Bend Triple Motor 45º
305. VB-3
Vertical Bend Triple Motor 90º
304. HB-3/45
Horizontal Bend Triple Motor 45º
302. DL-3
Triple Motor Duct Length
303. HB-3
Horizontal Bend Triple Motor 90º
301. 3MT-DL-3
Three Motor Transition to DL-3
307. TT-3
Triple Motor Twisted Transition
308. TMT-400x200/350
Triple Motor Transition DL-3 to 350Ø
311. DR-350 CB
Duct Length 350Ø Colourbond
310. DR-350
Duct Length 350Ø
312. DR-350/45
350Ø Bend 45º
309. TR-3
Triple Motor Transition to 350Ø
Qasair Rangehoods Installation Instructions52
TRIPLE MOTOR DUCTING
324. WVC-H-3
Wall Vent Cover Triple Motor Horizontal
323. BD/WV-V-3 SS
Back Draft Wall Vent Triple Motor Vertical
445M2Stainless Steel
322. BD/WV-V-3
Back Draft Wall Vent Triple Motor Vertical
320. BD/WV-H-3
Back Draft Wall Vent Triple Motor Horizontal
321. BD/WV-H-3 SS
Back Draft Wall Vent Triple Motor Horizontal
445M2 Stainless Steel
319. CH-350 CB
Chairmans Hat 350Ø Colurbond
325.WVC-H-3 SS
Wall Vent Cover Triple Motor Horizontal
445M2 Stainless Steel
326. WVC-V-3
Wall Vent Cover Triple Motor Vertical
327. WVC-V-3 SS
Wall Vent Cover Triple Motor Vertical
445M2 Stainless Steel
317. BD/SQ-RC 350 SS
Back Draft Roof Cowl 350Ø
445M2 Stainless Steel
318. CH-350
Chairmans Hat 350Ø
316. BD/SQ-RC 350
Back Draft Roof Cowl Triple Motor 350SQ
313. DR-350/90
350Ø Bend 90º
314. BD/RC-3
Back Draft Roof Cowl Triple Motor
315. BD/RC-3 SS
Back Draft Roof Cowl Triple Motor
445M2 Stainless Steel
Qasair Rangehoods Installation Instructions
53
TRIPLE MOTOR DUCTING
329. DD-3V-R
Duct Director Triple Motor Vertical Right
328. DD-3V-L
Duct Director Triple Motor Vertical Left
330. BD/WV-350Ø
Back Draft Wall Vent
332. FRWV-V-3 SS
Fire Rated Wall Vent Triple Motor Vertical
WALL VENT
WALL VENT
331. FRWV-H-3 SS
Fire Rated Wall Vent Triple Motor
Horizontal
333. FRC 350 SS
Fire Rated Roof Cowl 350Ø 445M2
Stainless Steel
FRBDWVK-H-3
9
5
9
5
2
4
0
I
/
I
1
1
0
I
/
I
75
400
250
150 210
EXTENDED
COMPRESSED
9
8
7
2
4
8
9
8
8
I
/
I
2
5
0
1
5
0
7
5
335. FRWV/K-H-3
Kit assembled as one piece. Fire rated Three
Single Motor Back Draft Wall Vent Horizontal
with telescopic length & cover
BDWVK-H-3
9
5
9
5
2
4
0
I
/
I
1
1
0
I
/
I
250
75
150 210
400
EXTENDED
COMPRESSED
2
4
8
9
8
7
1
5
0
2
5
0
7
5
9
8
8
I
/
I
334. BD/WV/K-H-3
Kit assembled as one piece. Three Single
Motor Back Draft Wall Vent Horizontal
with telescopic length & cover
WALL VENT WALL VENT
All the above ducting pieces
are all made in stainless
steel type 445M2 which
has a chromium content of
22% which is far greater
than marine grade stainless
steel and provides better
protection.
This is stated on the
description of each piece in
the ducting brochure.
ROOF COWLS, WALL VENTS
AND WALL VENT COVERS
The wall vent covers have
stainless steel screening
type 316 and meets the
requirements for stainless
steel screening under the
Australian Standard.
AS 3959-2009 Construction
of Buildings in Bushfire
prone areas.
WALL VENT COVERS SPECIFICATIONS
FIRE RATED APPROVED
Qasair Rangehoods Installation Instructions54
3. FA 60L-1 T 4. FA 60L-1 T
5. FA 60L-1 T
6. FA 60L-1 T / FA 60L-1 B
INSTALLATION IDEAS
Condari recommends Qasair and Condor Rangehoods be installed using ducting that is:
• rigid
• non-ammable
• correctly sized
to ensure maximum air movement and minimum noise levels.
Ducting incorrectly with exible or smaller diameter ducting will dramatically reduce the air movement
and increase the noise level of the rangehood and will void the manufacturer’s warranty.
The Installation Ideas below will give you some guidelines on how to correctly duct your Qasair and
Condor Rangehood using Qasair and Condor ducting pieces.
FA 60L-1 T
FA 60L-1 B
Rangehood
FA 60L-1 T
Rangehood
FA 60L-1 T
Rangehood
FA 60L-1 T
Rangehood
Qasair Rangehoods Installation Instructions
55
7. FA 90L-2 T 8. FA 90L-2 T
9. FA 90L-2 T 10. FA 90L-2 B
11. FA 90L-2 T 12. FA 90L-2 T
FA 90L-2 T
Rangehood
FA 90L-2 T
Rangehood
FA 90L-2 T
Rangehood
FA 90L-2 T
Rangehood
FA 90L-2 T
Rangehood
FA 90L-2 B
Rangehood
Qasair Rangehoods Installation Instructions56
13. 600HL-1 T / 700HL-1 T / 900HL-1 T 14. 600HL-1 T
15. CON 60L-1 T 16. CON 80L-1 T
17. CON 60L-1 T 18. CON 80L-2 T
CON 80L-2 T RangehoodCON 60L-1 T Rangehood
CON 60L-1 T Rangehood
CON 80L-1 T Rangehood
600HL-1 T Rangehood
600HL-1 T / 700HL-1 T / 900HL-1 T
Rangehood
Qasair Rangehoods Installation Instructions
57
19. 1200HL-2 T 20. LIS 800L-2 T
21. LIS 1000L-2 T 22. 3F 900L-2 T / 1200L-2 T
23. LIS 500L-1 T 24. LIS 800L-1 T
LIS 800L-2 T
Rangehood
1200HL-2 T
Rangehood
LIS 1000L-2 T
Rangehood
3F 900L-2 T / 1200L-2 T
Rangehood
LIS 800L-1 T
Rangehood
LIS 500L-1 T
Rangehood
Qasair Rangehoods Installation Instructions58
25. CON 80L-1 T / LIS 1000-2 T 26. LIS 1200L-2 B
1. FA 60L-1 B2. FA 90L-1 T
FA-60L-1 B
Rangehood
FA-90L-1 T
Rangehood
LIS 1200L-2 B
Rangehood
LIS 1000L-2 T
Rangehood
CON 80L-1 T
Rangehood
Qasair Rangehoods Installation Instructions
59
FILTER CLEANING
OPERATION DETAILS
RANGEHOOD CLEANING
For the best results, please clean filters regularly.
Condari recommends cleaning filters once per month, or immediately after heavy use.
You can do this by hand washing in warm soapy water, or by placing filters in the top rack of the
dishwasher using a detergent of pH 8 or less.
Note: Washing the filters in the dishwasher may cause discolouration of the filters.
We recommend washing filters in the dishwasher without detergent or use one of the powder
detergent.
Ensure the filters are completely dry before placing them back.
Do not operate the rangehood without the filters installed.
Condari does not recommend the use of corrosive, caustic or acidic products, particulary industrial
or citric products.
Condari has experienced problems with many of the dishwashing detergents now on the market.
Particularly with the tablet type detergents as many come from overseas, which are made for a hard
water environment. We have found that these detergents have a deleterious effect on the filters and
the result is that the filters last for about 50 to 60 washes.
This is equivalent to about 5 to 6 years life.
Qasair Rangehoods are made from stainless steel, either type 304 or type 316.
* Type 304 is classied as 18/8 stainless steel
* Type 316 is classied as 18/10 stainless steel
This means that the stainless steel is made of 18% nickel and either 8% or 10% of chromium respectively.
Stainless steel gets its protective coating from the chromium oxidising in the air to form a protective surface
of chromium oxide. This can be attacked by different substances, such as salt water or sea air. The stainless
steel will start to show pit marks which are referred to in the industry as tea staining. This will happen to
marine grade stainless steel type 316 in the same way it will happen to stainless steel type 304, it will just
take longer to happen.
The way to overcome this is to clean the stainless steel with warm soapy water and then polish it with a cloth
so that the chromium will oxidise again.
When exposed to sea water or sea side conditions this is only a stop gap measure as the attack will start
again.
With stainless steel rangehoods exposed in Alfresco areas we recommend spraying the hood with vegetable
oil and rubbing it all over the rangehood, if it is going to be unused over a period of time.
Light ON and OFF
Fan Left Side ON and OFF
Right Side Fan/s ON and OFF
Light High and Low
Fan Left Side High and Low
Right Side Fan/s High and Low
Qasair Rangehoods Installation Instructions60
CONDARI PTY LTD APPLIANCE GUARANTEE
The benefits conferred by this warranty are in addition to all other rights and remedies in respect of the product
which the consumer has under the Competition and Consumer Act 2010 and similar state and territory laws.
Condari P/L in Melbourne (and by their agency in Country Areas and other States) warrants that the appliance
will be free from defects in materials and workmanship for a period of 36 months from the date of purchase of
the appliance to the consumer.
If there is a breach of this warranty, Condari will rectify, free of charge, at it’s nearest service centre or
authorised service agency any fault caused by faulty workmanship or material at the time of manufacture
occurring in the appliance within 36 months from the date of purchase of the appliance to the customer.
This warranty is conditional upon the appliance being used only for personal, domestic and household purposes
and installed and operated in accordance with QASAIR Instructions and does not apply to articles which by their
nature are consumable.
If a defect is caused by neglect, misuse, or failure to follow operating instructions where special precautions are
detailed for user attention then a charge shall be made for the service call.
For example:
With the filters the user is specifically requested:
• To clean filter regularly by handwashing or placing in a dishwasher at least once a month.
• To turn rangehood off after each use.
• Note: Warranty under filter cleaning on page 59
Where a claim is made under warranty, CONDARI reserves the right to determine whether or not the fault is
caused by faulty workmanship or material or that the part is defective.
The consumer shall be fully responsible for all expenses whatsoever incidental to the removal of parts from
the unit or to their replacement. Amongst other things, such responsibility shall extend to damaged walls, tiles,
fixtures and fittings whether or not the unit has been built into a cupboard and irrespective of the stage either of
its installation or the fitting of any other item whatsoever in its vicinity.
No other person, or firm or corporation is authorised by Condari to offer or give on its behalf any other greater
warranty than that given by Condari under this warranty.
Condari Pty Ltd provides to all QASAIR Rangehoods a 10 year motor replacement warranty. This is a change
over warranty.
The installation of the rangehood must comply with the information in this guide. Failure to follow the instructions
may result in loss of the warranty.
We do point out that incorrect installation such as the ducting being the incorrect size or the duct run being too
long will result in the motor failing and possible burning out.
The change over will be carried out by a authorized technician and will be charged at the rates applicable at
time of the change over.
Qasair Rangehoods Installation Instructions
61
EXCLUSIONS
There are some exclusions from the Condari Pty Ltd Guarantee. (on previous page)
CONDOR Rangehoods are designed to be used over all domestic barbecues available
in AUSTRALIA.
QASAIR Rangehoods are not to be used over barbecues approved for outdoor use only.
Outdoor barbecues will have a rating plate on them specifying that they are approved for outdoor use only and
also a mega joule rating per burner or a total mega joule rating.
In practice any barbecue or outdoor cooking appliance over 50 mega joule will need a specially made
rangehood with an air movement exceeding 2000 cubic meters per hour.
QASAIR have hoods to go over domestic cookers such as VIKING, WOLF and CAPITAL cooking appliances.
These brands have a mega joule rating of up to 95 mj and therefore special hoods are required for the
appliances.
CONDARI will manufacture special rangehoods to go over commercial cooking appliances situated in domestic
kitchens.
Once the heat output is over 50 mega joule a special rangehood is required.
Qasair Rangehoods Installation Instructions62
Date purchased
Purchased from
Model
Serial No
The purchaser must fill in the above information and keep this with the original purchase document.
This form must be produced if and when
a claim is made under this warranty.
QASAIR Rangehoods are made in Ringwood, Australia.
Tel: +61 3 9482 7088
Fax: +61 3 9482 7011
Email: [email protected]
STANDARD
WARRANTY
Pleae Note that the Warranty is from the date of installation and the service technician will need to see proof of
purchase so he can provide service under the guarantee.
If no proof of purchase then the service call will be charged at standard rates and if proof provided later,
reimbursement will be made.
Qasair Rangehoods Installation Instructions
63
Customer Name:
Model Number: Serial Number:
Purchased from:
Purchased Date: Installed Date:
Installer Name:
Installer Signature:
Condari Pty Ltd authorised installer stamp:
(This is required for validity of extended warranty)
EXTENDED
WARRANTY
Pleae note: The installation warranty does not cover the ageing process in a building or any problems due to
storm damage.
Condari Pty Ltd provides an extended warranty from 36 months to 72 months if installed by an authorised
Qasair installer and the below form is completed.
The authorised installer also offers a warranty on their workmanship for the same period of 72 months with a
guarantee that the installation is in compliance with
‘Qasair installation instructions’.
Qasair Rangehoods Installation Instructions64
NOTES
Qasair Rangehoods Installation Instructions
65
NOTES
Qasair Rangehoods Installation Instructions66
NOTES
Qasair Rangehoods Installation Instructions
67
NOTES
www.condari.com.au
DISTRIBUTED IN AUSTRALIA BY CONDARI PTY LTD
Tel: 1300 360 563
HEAD OFFICE
VIC Tel: 03 9482 7088 Fax: 03 9482 7011
Email: [email protected]
Website: www.condari.com.au
YOUR DISTRIBUTORS
QLD Tel: 07 3423 3503 Fax: 07 3282 9122 Email: salesqld@qasair.com.au
WA Tel: 08 9242 5387 Fax: 08 9201 0887 Email: saleswa@qasair.com.au
TAS Tel: 03 9482 7088 Fax: 03 9482 7011 Email: sales@qasair.com.au
New Zealand
Singapore
QASAIR RANGEHOODS MADE IN RINGWOOD 3134
CONDARI RESERVES THE RIGHT TO CHANGE SPECIFICATION WITHOUT NOTICE
rev. 150318
