All products are trademarks of Nostalgia Products Group, LLC.
Worldwide design & utility patented or patents pending.
© 2012 Nostalgia Products Group, LLC.
www.nostalgiaelectrics.com
(rev. 09/18/14)
2014
CCP600
Vintage Collection™
Old Fashioned Movie Time Popcorn Cart
Instructions and Recipes
ENGLISH
2
Make every day a party!
Visit www.nostalgiaelectrics.com for more fun products.
CONTENTS
IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
IMPORTANT SAFEGUARDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
PARTS & ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
HOW TO OPERATE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
HELPFUL TIPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
CLEANING & MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
RECIPES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
RETURNS & WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
SAFETY
Appliance Specications:
120 Volts, 60 Hz
820 Watts, ETL Approved
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and
on your appliance. Always read and obey all safety messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that
can kill or hurt you and others.
All safety messages will follow the safety alert symbol.
All safety messages will tell you what the potential hazard is, tell you how to reduce the
chance of injury, and tell you what can happen if the instructions are not followed.
ENGLISH
3
IMPORTANT PRECAUTIONS
1. NEVER immerse in water.
2. NEVER use near water.
3. NEVER use an abrasive sponge nor cloth.
4. NEVER use a scouring pad on the appliance.
5. NEVER leave appliance unattended while in use.
6. NEVER force Kettle in or out of the brackets as this may cause gears to
become misaligned and appliance will not operate properly.
7. Unplug unit from outlet when not in use and during cleaning.
8. DO NOT operate this appliance with a damaged cord or
plug, nor if the appliance ever malfunctions.
9. DO NOT clean any parts of this appliance in a dishwasher.
10. Keep out of reach of children.
11. This appliance is NOT A TOY.
12. Unsupervised young children and cognitively challenged
individuals should never operate this appliance.
13. Young children should be supervised while in proximity
of the appliance to ensure their safety.
IMPORTANT SAFEGUARDS
Basic safety precautions should always be followed when using
electrical appliances, including the following:
1. Read all instructions before operating this appliance.
2. Keep door of Main Unit closed while operating. Do not
touch Kettle while operating; it gets very HOT.
3. To protect against electrical shock do not immerse cord, plug or
any part of this appliance in water or other liquids.
4. Close supervision is necessary when any appliance is used near children.
5. Unplug from outlet when not in use, before removing parts and before cleaning.
6. DO NOT operate any appliance with a damaged cord or plug, nor if
the appliance has been damaged in any manner. Return the appliance
to the nearest repair shop for examination or repair.
7. The manufacturer does not recommend the use of accessory
attachments. Use of accessory attachments may cause injuries.
8. DO NOT use outdoors.
9. Position the appliance as close to the outlet as possible
to prevent injury due to tripping over cord.
10. DO NOT leave Kettle motor running once popping has ceased.
11. Extreme caution must be used when moving this appliance.
ENGLISH
4
12. DO NOT use the appliance for other than its intended use.
13. An appliance that is plugged into an outlet should not be left unattended.
14. Check Kettle for presence of foreign objects prior to use.
15. Make sure the Kettle is properly attached to brackets before operating
and that the motor plug is plugged into the Kettle.
16. A short power supply cord is provided to reduce the risk resulting
from becoming entangled or tripping over a long cord.
17. Longer detachable power supply cords can be used if care is exercised in their use.
18. The marked electrical rating of an extension cord should be at
least as great as the electrical rating of the appliance.
19. This appliance has a three-prong plug. To reduce the risk of electrical shock, this
plug is intended to t into a polarized outlet only one way. If plug does not t,
contact a qualied electrician. Do not attempt to modify the plug in any way.
20. CAUTION: The lightbulb inside of this unit will get hot. This bulb is
only for use with the popcorn cart. If the bulb gets damaged, it must
be replaced by a qualied person in order to avoid a hazard.
21. Do not attempt to service this appliance yourself, as opening or
removing covers may expose you to dangerous voltage or other
hazards. Refer all servicing to qualied service personnel.
SAVE THESE INSTRUCTIONS!
INTRODUCTION
Thank you for purchasing the OLD FASHIONED MOVIE TIME POPCORN CART, a product
in Nostalgia Electrics’ Vintage Series™. This 59” tall vendor-style popcorn cart will be the
hit of every party. It pops up to 24 cups of hot, fresh, kettle cooked popcorn per batch.
Providing a vintage look and feel, reminiscent of silent movie houses and carnivals
circa-early 1900s, the OLD FASHIONED MOVIE TIME POPCORN CART is designed for
both home and commercial use. It features a large, stainless steel kettle with a built-in
stirring system and kernel catcher to keep unpopped kernels out of each perfect batch.
There is a compartment in the base of the unit to store supplies, making it easy to
keep the cart well stocked and organized. The OLD FASHIONED MOVIE TIME POPCORN
CART has an easy-to-clean design. Its accessible height makes serving a snap.
ENGLISH
5
PARTS & ASSEMBLY
Hardware
#1 Screw (10mm) #2 Bolt (60mm) #3 Spring Washer #4 Flat Washer
Qty. 12 Qty. 2 Qty. 4 Qty. 10
#5 Flat Washer #6 Nut Cap
Qty. 12 Qty. 4
ENGLISH
6
Assembly
(A) Main Unit (B) Kernel Measuring (C) Storage (D) Oil Measuring
Cup Compartment Spoon (1 tbsp.)
(E) Push Handle (F) Axle Bolts (G) Wheel (H) Wrench
(I) Base Support (J) Cross Bar (K) Leg Assembly (L) Popcorn Scoop
ENGLISH
7
Assembly of Base Support
1. Push Handle (E) attaches onto the Storage Compartment (C)
using four #1 Screws and four #5 Flat Washers.
2. Insert Cross Bar (J) into the square inserts on the inside of Base Support (I) and secure
from below with two #1 Screws and two #5 Flat Washers. Insert the Leg Assembly
(K) into the square inserts between the ends of the Base Support (I) and fasten from
inside with two #2 Bolts, four #4 Flat Washers, two #3 Spring Washers, and two #6
Nut Caps. Also secure from above with two #1 Screws and two #5 Flat Washers.
3. Assemble Base Support (I) into the bottom of the Storage Compartment
(C) and secure with four #1 Screws and four #5 Flat Washers.
ENGLISH
8
Assembly of Wheels
1. Put #4 Flat Washer onto Axle Bolt (F) and insert into Base Support (I).
2. Put on #4 Flat Washer. Slide Wheel (G) onto Axle Bolt (F), then add a
second #4 Flat Washer, #3 Spring Washer and #6 Nut Cap.
3. Use Wrench (H) to tighten the #6 Nut Cap.
4. On the other side of Base Support (I), insert second Axle Bolt (F) with #4 Flat Washer, add #4
Flat Washer, second Wheel (G), another #4 Flat Washer, #3 Spring Washer and a #6 Nut Cap.
5. Use Wrench (H) to tighten the #6 Nut Cap.
Assembly of Main Unit
1. Place Main Unit (A) onto the top of the Storage Compartment (C).
2. Ensure that the two inserting pins at the bottom of the Main Unit (A) line up correctly
so that Main Unit (A) can be locked under the beam of the Storage Compartment (C).
(#6)
Nut
Cap
(#4)
Flat
Washer
(F)
Axle
Bolt
(G)
Wheel
(I)
Base
Support
(#4)
Flat
Washer
(#3)
Spring
Washer
ENGLISH
9
HOW TO OPERATE
Before rst use, clean the inside of the unit by wiping with a moist, non-abrasive
sponge, towel or cloth and then wipe with a non-abrasive dry towel. Wipe down the
inside of the Kettle and be sure it is properly placed in the brackets before starting.
1. First, nd a at surface near an electrical outlet before starting. Make sure your cord
is away from any water source. It is acceptable to use an extension cord if needed.
2. Gather your popcorn making supplies: popcorn, seasonings, bowls or bags for
holding the popcorn, cooking oil, Kernel Measuring Cup and Oil Measuring Spoon.
(Kernel Measuring Cup and Oil Measuring Spoon are included with your unit).
3. Make sure Kettle is properly secured in support brackets.
4. Make sure Kettle motor is fully plugged into the outlet located on the bottom
side of the kettle. NOTE: Kettle will not heat if plug is not fully inserted.
5. Plug in the appliance while switch is ipped to OFF position.
6. Turn appliance ON by ipping the switch on the top of the machine (see illustration above
for location of switches). Allow the appliance to run 3-5 minutes to heat up Kettle.
7. Once Kettle has heated, turn unit OFF before adding ingredients.
8. Use the Oil Measuring Spoon supplied with your OLD FASHIONED MOVIE TIME
POPCORN CART to add 3 tablespoons of your favorite popcorn cooking oil
to the Kettle. For every Measuring Cup full of kernels (6 oz.), add 3 spoonfuls
(3 tbsp.) of oil. For best results, light vegetable oil is recommended.
9. Add 6 oz. popcorn kernels to the Kettle using supplied Kernel Measuring Cup.
10. Close the door and turn unit ON. Turn the light switch to the ON
position to turn on the light and activate the Popcorn Warmer.
11. In no time at all, you will hear the popping begin. Fresh, hot popcorn will
begin to burst out of the ip lids on the Kettle - just like at the theater!
ON/OFF Light / Popcorn
Wamer Switch
Crank Handle
Stainless Steel Kettle
Popcorn
Warmer
ENGLISH
10
HELPFUL TIPS
SMOKING
If your OLD FASHIONED MOVIE TIME POPCORN CART begins to smoke during
cooking, it may be due to grease build up. In order to reduce smoking,
make sure that you clean the inside of the Kettle between uses.
CLEANING & MAINTENANCE
EASY CLEAN KETTLE
Wing nut
Kettle
Lid
1. Make sure appliance is unplugged before cleaning. Unplug the outer plug
to the outlet as well as the Kettle motor plug inside the Main Unit.
2. Unplug Kettle motor and remove Kettle from support brackets.
3. Take Kettle out of the Main Unit and remove Wing Nuts by twisting
counter-clockwise. Lift dual-hinged lid from Kettle.
4. Fill ²⁄
³
of Kettle with hot, soapy water and let sit for 15 – 20 minutes to cut the grease. (Time
may vary – use your own judgment depending on the amount of cleaning necessary.)
5. Empty water. If necessary, use the scrubber side of a
cleaning sponge to scrub inside of Kettle.
6. Use slightly damp, non-abrasive sponge, towel or cloth to wipe down the inside and
outside of Main Unit and dual-hinged lid, then wipe with a non-abrasive towel to dry.
7. Carefully rinse all parts and dry.
NOTE: To protect the motor plug from getting wet, never immerse the Kettle in any
liquid. Never place any parts in the dishwasher. Always wash by hand.
ENGLISH
11
RECIPES
The OLD FASHIONED MOVIE TIME POPCORN CART makes hot, fresh, theater style
popcorn anytime! Enjoy your freshly popped corn in a variety of ways:
• Regular theater style popcorn – add butter and salt.
• Add a pinch of sugar and salt to popcorn for a sweet kettle corn taste.
• Flavored popcorn – add seasoning from any gourmet popcorn seasoning kit.
• Try some of these fun recipes:
PARMESAN POPCORN
• 1 Gallon of
Popped Corn
• 1 Tsp. Garlic Powder
• 3 Green Onions,
finely chopped
• ½ Tsp. Cracked
Pepper
• 1 Tsp. Sea Salt
• 1 Cup Parmesan
Cheese, grated (more
or less to taste)
• 3 Tbsp. Olive
Oil, heated
Pop corn kernels using the OLD FASHIONED MOVIE
TIME POPCORN CART as directed on page 9.
Combine garlic powder, green onions, cracked
pepper, sea salt and parmesan cheese. Set aside.
In a large mixing bowl, drizzle hot olive oil over popcorn.
Toss until well coated.
Slowly add in dry ingredients while continuously
stirring popcorn until well coated.
You may also shake the dry ingredients over
popcorn in a large paper or muslin bag.
TRADITIONAL POPCORN BALLS
• ½ Cup Popped
Popcorn
• ½ Cup Corn Syrup
• ½ Cup Granulated
Sugar
• ½ Tsp. Salt
• 1 Stick of Butter,
softened
Pop corn kernels using the OLD FASHIONED MOVIE
TIME POPCORN CART as directed on page 9.
Mix corn syrup, sugar and salt together in pot and
dissolve over medium heat for about 3 minutes.
Add popcorn to pot, stirring and tossing consistently
until popcorn is evenly coated at low heat.
Remove from heat.
Use softened butter to form balls while
popcorn mixture is still warm.
Wrap individual balls in plastic wrap, tie
and store at room temperature.
ENGLISH
12
CHUNKY MONKEY
• 1 Gallon of
Popped Corn
• 1 (12-oz.) Bag
Semi-Sweet
Chocolate Chips
• 1 (12-oz.) Bag Peanut
Butter Morsels
• 1 (4.2-oz.) Bag
Banana Chips, broken
into small pieces
• 1 (11-oz.) Bag Peanuts
Pop corn kernels using the OLD FASHIONED MOVIE
TIME POPCORN CART as directed on page 9.
Melt chocolate chips and peanut butter morsels
over stove, as packaging recommends.
Line cookie sheet with wax paper.
Toss together popcorn and banana chips.
Spread popcorn and banana chip mixture
evenly over cookie sheet.
Drizzle melted chocolate and peanut butter
mixture over popcorn and banana chips.
Sprinkle peanuts over chocolate and peanut butter mixture.
Allow to cool.
When chocolate and peanut butter has hardened,
break up the Chunky Monkey into pieces.
Can be stored in plastic freezer bags.
POPCORN PEPPERMINT BARK
• 1 Gallon of
Popped Corn
• 1 (12-oz.) Bag
Semi-Sweet or Dark
Chocolate Chips
• 1¼ Cup Peppermint
Sticks, crushed
Pop corn kernels using the OLD FASHIONED MOVIE
TIME POPCORN CART as directed on page 9.
Melt chocolate chips over stove, as packaging recommends.
Line cookie sheet with wax paper.
Spread popcorn evenly over cookie sheet.
Drizzle melted chocolate over popcorn.
Sprinkle crushed peppermints over chocolate.
Allow to cool.
When chocolate has hardened, break up
Popcorn Peppermint Bark into pieces.
Can be stored in plastic freezer bags.
ENGLISH
13
RETURNS & WARRANTY
SHOULD YOUR UNIT NOT WORK OR IF DAMAGED WHEN YOU FIRST TAKE IT OUT
OF THE BOX, PLEASE RETURN IT TO THE PLACE OF PURCHASE IMMEDIATELY.
OLD FASHIONED MOVIE TIME POPCORN CART / CCP600
Should you have any questions, please contact us via email or at the
customer service number listed below between the hours of 8:00 AM
and 5:00 PM, Monday through Friday, Central Standard Time.
Distributed by:
Nostalgia Products Group LLC
1471 Partnership Dr.
Green Bay, WI 54304-5685
Customer Service
Phone: (920) 347-9122
Web: www.nostalgiaelectrics.com
Customer Service Inquiry
To submit a Customer Service inquiry, go to www.nostalgiaelectrics.com and
ll out the Customer Service Inquiry form and click the Submit button.
A representative will contact you as soon as possible.
This appliance is designed and built to provide many years of satisfactory performance
under normal household use. The distributor pledges to the original owner that
should there be any defects in material or workmanship during the rst 90 days of
purchase, we will repair or replace the unit at our option. Our pledge does not apply
to damages caused by shipping, mishandling or unit being dropped. A product
deemed defective either from manufacturing or being mishandled is up to the
distributor’s discretion. In order to obtain service under this warranty, please contact
Nostalgia Products Group, LLC at the telephone number listed above or by lling
out the Customer Service Inquiry Form located at www.nostalgiaelectrics.com.
This warranty does not apply to re-manufactured merchandise.
Please read these instructions carefully. Failure to comply with these instructions,
damages caused by improper replacement parts, abuse or misuse will void this
pledge to you and is being made in place of all other expressed warranties.
For more information, visit us online at www.nostalgiaelectrics.com.
Like us on Facebook at www.facebook.com/NostalgiaElectrics.
Follow our boards on Pinterest at www.pinterest.com/nostalgiaelctrx.
Tweet along with us on Twitter at www.twitter.com/NostalgiaElctrx.
