www.edgestar.com
V2.1-08112021
Beverage Refrigerator
BWC71SS
Owner’s Manual
2
Important Safety Information
Electrical Safety
Improper handling can cause serious damage to the EdgeStar beverage refrigerator and / or injury to
the user. This beverage refrigerator is designed for domestic indoor use only. Do not use the unit for
industrial or commercial use. Any other use may invalidate the warranty. Please review the ratings
label located on the rear panel of the unit for electrical and other technical data related to this unit. The
unit must be used in a properly grounded wall outlet.
Please read and follow the safety information listed below to reduce the risk of re, electric
shock, or injury.
• Do not exceed the power outlet ratings.
• It is recommended the beverage refrigerator be connected on its own circuit.
• The unit must be installed in accordance with state and local electrical codes.
• A standard electrical supply (115 V, 60Hz), that is properly grounded in accordance with the National
Electrical Code and local codes and ordinances is required.
• Use outlets that cannot be turned o by a switch or pull chain.
• Always turn the unit o and unplug it from the outlet when cleaning.
• Unplug the unit if it is not going to be used for an extended period of time.
• Do not operate the unit with a power plug missing the ground plug, a damaged cord, or a loose
socket.
• Be sure the beverage refrigerator is properly grounded.
• Avoid installation in high humidity environments such as bathrooms and non-acclimatized
basements. Excess moisture may create condensation on the door and impact the performance of
the refrigerator.
• Never plug or unplug the unit with wet hands.
• Do not bypass, cut, or remove the grounding plug.
• Do not use extension cords or power strips with this unit. You may need to contact your electrician
if it is necessary to use a longer cord or if you do not have a grounded outlet. Do not modify the
power cord’s length or share the outlet with other appliances.
• Do not start or stop the unit by switching the circuit’s power on and o.
• If the power cord is damaged, it must be replaced by the manufacturer or a qualied technician.
• Never repair the unit while it is plugged in.
• Immediately unplug the unit if it makes strange sounds, emits smells, or smoke comes out of it, and
contact customer service.
• Do not remove any part of the casing unless instructed to do so by an authorized technician.
• You should never attempt to repair the unit yourself. Contact customer service for service options if
the unit needs service.
DANGER: Flammable Refrigerant Used! When handling, moving, and using the refrigerator,
make sure to avoid either damaging the refrigerant tubing or increasing the risk of a leak.
!
3
Important Safety Information
General Safety
• To prevent injuries, use at least two people to move and install the beverage refrigerator.
• Install the beverage refrigerator in a well-ventilated area where the ambient temperature is above
50° F and below 90° F.
• The temperature range for this refrigerator is optimized for beverage storage. Perishable food items
may require a dierent storage environment.
• Do not place hot or warm items into the refrigerator before they cool down to room temperature.
• This unit is designed to be installed indoors, and protected from rain, sleet, snow, and / or moisture.
• This unit is not intended to be used by children.
• Children should be supervised to ensure that they do not play with this product.
• Never allow children to crawl inside the refrigerator. If you are disposing of the unit, remove the
door.
• Do not use this appliance near ammable gas or combustibles such as gasoline, benzene, or
thinner.
• Do not store explosive substances such as aerosol cans with ammable propellant in this
appliance.
• Do not place the unit near heat sources such as ovens, grills, or direct sunlight.
• Only use in an upright position on a at, level surface and provide proper ventilation.
• Do not pinch or kink the power supply line between the unit and cabinet.
• Do not leave any cleaning solutions in the unit.
• Do not use solvent-based cleaning agents or abrasive solutions to clean the unit as they may
damage the interior and exterior.
• Do not place any other appliances on top of the unit.
• Do not turn the unit upside down, on its side, or at an angle o level.
• If your model of beverage refrigerator is equipped with a lock, keep the keys away from children.
• Do not move the unit without emptying the contents and securing the door in a closed position.
• This appliance is not intended for use by persons (including children) with reduced physical,
sensory, or mental capabilities unless they are given supervision or instruction by a person
responsible for their safety.
• This appliance is meant for use in the household or similar settings.
• Keep all ventilation openings clear of obstruction.
• Do not use mechanical devices or other means to accelerate the defrosting process.
• Do not damage the refrigerant circuit.
• Do not use other appliances inside the refrigerator unless recommended by the manufacturer.
• If the power cord is damaged, it must be replaced by the manufacturer, its service agent, or a
similarly
!
DISPOSAL: This appliance may not be treated as regular household waste, it should be
taken to the appropriate waste collection
!
4
Table of Contents
Important Safety Information ..........................................................................................2
First-Time Operating Instructions ................................................................................... 5
Introduction .....................................................................................................................5
Parts Identication .......................................................................................................... 6
Installation ......................................................................................................................7
Unpacking the Beverage Refrigerator ..................................................................... 7
Types of Installation.................................................................................................7
Clearance Requirements.........................................................................................8
Electrical Requirements .......................................................................................... 9
Recommended Grounding Method ......................................................................... 9
Leveling the Beverage Refrigerator.........................................................................9
Reversing the Door Swing.......................................................................................10
Operation ........................................................................................................................11
Installation Checklist before Operation....................................................................11
Using the Temperature Control Panel ..................................................................... 11
Normal Sounds........................................................................................................12
Defrosting ................................................................................................................ 13
Preparing the Beverage Refrigerator for Storage.................................................... 13
Cleaning and Maintenance ............................................................................................. 13
Troubleshooting .............................................................................................................. 14
Specications .................................................................................................................16
EdgeStar Limited Warranty ............................................................................................ 17
5
First-Time Operating Instructions
Before use, make sure all packaging labels and materials are removed from the unit. Be sure to keep
track of all included parts and pieces before discarding the packaging materials. It is advised that you
keep the original box and packaging materials in case you ever need to move or ship the appliance in
the future.
Let the unit stand for at least 24 hours before you use it; this allows the cooling components time to
settle from transit. The instruction manual should be read before use.
Introduction
Thank you for purchasing this EdgeStar beverage refrigerator. We hope that this purchase will be
the beginning of a lasting and rewarding relationship between you and EdgeStar. We will provide the
customer support and exemplary products necessary to nurture that relationship.
This manual contains important information regarding the proper installation, use, and maintenance
of your beverage refrigerator. Following this manual will ensure that your product will work at its peak
performance and eciency.
Please save the original product packaging in case you need to safely transport your beverage
refrigerator.
For Your Records:
Please write down the model number and serial number below for future reference. Both numbers are
located on the ratings label on the back of your unit and are needed to obtain warranty service. You may
also want to staple your receipt to this manual as it is the proof of your purchase, and is also needed
for service under your warranty.
Model Number: ________________________________
Serial Number: ________________________________
Date of Purchase: ______________________________
For a more ecient experience, please do the following before contacting customer service:
• If you received a damaged product, immediately contact the retailer or dealer who sold the product.
• Read and follow this instruction manual carefully to help you install, use, and maintain your beverage
refrigerator.
• Read the troubleshooting section of this manual. It will help you diagnose and solve common issues.
• Visit us on the web at www.edgestar.com to register your product, download product guides, and
access additional troubleshooting resources and up-to-date information.
• For warranty service, customer service representatives are available at service@edgestar.com.
6
Parts Identication
Front View:
Rear View:
Note: Gather the model and serial number from the product label and write them down
before installing the beverage refrigerator.
!
Top Right Hinge
Shelf
Stainless Steel Door
Leveling Leg
Internal fan
Temperature Control Panel
Cabinet
Product Label
Power Cord
7
Installation
The beverage refrigerator should be installed in accordance with local electrical code requirements.
The beverage refrigerator should also be placed in a location that is strong enough to support its total
weight, keeping in mind that it will weigh substantially more when fully loaded than when empty. Before
you plug the beverage refrigerator into a power supply, be sure to let it stand upright for at least
24 hours to allow the compressor’s oils to settle.
Unpacking the Beverage Refrigerator
Warning: Use two or more people to move and install the beverage refrigerator. Failure to
do so can result in back or other injury. Carefully remove the packaging materials. Remove
any shipping tape and glue from your beverage refrigerator before use. Do not use sharp
instruments, rubbing alcohol, ammable uids, or abrasive cleaners to remove tape or
glue. These products can damage the surface of your beverage refrigerator.
!
Warning: Do not remove any safety, warning, or product information labels from your
beverage refrigerator.
!
Warning: DO NOT install the beverage refrigerator behind a closed cabinet door.
This beverage refrigerator has been designed for freestanding installation. There must be adequate
ventilation and access for service.
Freestanding Installation:
A freestanding installation will allow you to install the beverage refrigerator in almost any place you
desire. You must follow the stated instructions for electrical requirements and leveling the beverage
refrigerator.
Types of Installation
!
Note: The beverage refrigerator should be installed on a rm and level surface that will
be able to support the entire weight of a fully loaded unit. It is important for the beverage
refrigerator to be level in order to work properly. If needed, you can adjust the height of
the beverage refrigerator by rotating the feet. See the “Leveling the beverage refrigerator”
section.
Note: A standard electrical supply (115V AC only, 60 Hz), properly grounded in accordance
with National Electrical Code and local codes and ordinances, is required.
!
!
8
Notes:
• Choose a location that has ambient temperatures above 50° F and below 90° F. Operation
outside these temperatures may result in lowered eciency or cause other adverse eects.
• This unit MUST be installed in an area protected from the elements, e.g. wind, rain, water
spray or drips.
• The beverage refrigerator should not be located next to ovens, grills, or other heat sources.
• Do not kink or pinch the power supply cord between the beverage refrigerator and the
wall or cabinet.
!
Clearance Requirements
When installing the beverage refrigerator under a counter, follow the recommended spacing dimensions
shown.
To ensure proper ventilation, allow at least 5” of clearance at the back, 3” at the top, and 3” at the sides.
5”
3”
3
”
5”
3”
Top View: Side View:
9
ELECTRIC SHOCK HAZARD!
• Plug into a grounded 3-prong outlet.
• Never remove the grounding prong from the plug.
• Never use an adapter to bypass the grounding prong.
• DO NOT use an extension cord.
• Failure to follow these instructions can result in re, electrical shock, or death.
!
Electrical Requirements
Recommended Grounding Method
Before you move your Beverage Refrigerator into its nal location, it is important to make sure you have
the proper electrical connection:
A standard electrical supply (115 V, 60Hz), properly grounded in accordance with the National Electrical
Code and local codes and ordinances is required.
It is recommended that a separate circuit, serving only your beverage refrigerator, be provided. Use
receptacles that cannot be turned o by a switch or pull chain.
The fuse (or circuit breaker) size should be 15 Amps.
For your personal safety, this appliance must be grounded. It is equipped with a power supply cord that
has a 3-pronged grounding plug. To minimize possible shock hazard, the cord must be plugged into a
mating 3-pronged wall socket and grounded in accordance with the National Electrical Code and local
codes and ordinances. If a mating wall socket is not available, it is the personal responsibility of the
customer to have a properly grounded, 3-prong wall receptacle installed by a qualied electrician.
Leveling the Beverage Refrigerator
It is important for the beverage refrigerator to be level in order to work
properly. It can be raised or lowered by rotating the plastic sheaths around
each of the feet on the bottom of the machine. If you nd that the surface
is not level, rotate the feet until the beverage refrigerator becomes level.
You may need to make several adjustments to level it. We recommend
using a carpenter’s level to check the machine.
1. Place a carpenter’s level on top of the product to see if the beverage
refrigerator is level from front to back and side to side.
2. Adjust the height of the feet as follows:
Turn the leveling feet to the right to lower that side of the refrigerator.
Turn the leveling feet to the left to raise that side of the refrigerator.
up
down
Notes:
• Once you are ready to install the unit in a cabinet or directly on the oor, you must adjust
the feet to level the beverage refrigerator.
• The smaller leveling leg will go into the underside of the lower door hinge.
!
10
Warning: Before you begin, unplug the Refrigerator.
!
Reversing the Door Swing
To Remove the Door:
1. Using a athead screw driver carefully pry the top hinge cover o.
2. Using a Philips screwdriver, remove the screws and take o the top hinge. Keep the
parts together and set them aside.
3. Lift the door o the bottom hinge and set the door aside.
4. Remove the bottom hinge by removing the screws with a Philips head screwdriver
To Install the Door:
1. Using a athead screwdriver, remove the decorative plugs or cover from the opposite
cabinet top corner and from the door. Set the plugs or cover aside.
2. Install the bottom hinge at the opposite side corner and fasten the screws.
3. Position the door on the bottom hinge.
4. Align the door on the bottom hinge and install the top hinge.
5. Push the decorative plugs or cover into the corresponding holes.
Top Hinge
Hinge Cover
Screws
Cabinet
Door
11
Operation
Installation Checklist before Operation
Using the Temperature Control Panel
1. Have all packing materials and tape been removed from the interior and exterior of the beverage
refrigerator?
2. Have the installation instructions been followed, including connecting the machine to electricity?
And has proper grounding been installed for the beverage refrigerator?
3. Has the machine been leveled?
4. Is the beverage refrigerator in a site where the ambient temperature is between 50° F and 90° F all
year round?
5. Is there a clearance of at least 5” at the rear, 3” at the top, and 3” at the sides for proper air
circulation?
The beverage refrigerator has a temperature range from 38°F to 65°F and will display the set temperature.
Temp Down Button: Press to decrease the temperature by 1 degree.
Temp Up Button: Press to increase the temperature by 1 degree.
Light Button: Press to turn the interior lighting on or o.
Temp.
c
F
Power Button: Turns the unit on and o. (press and hold this button for
approximately 3 seconds)
The Celsius or Fahrenheit light will be lit depending on which temperature type is
being displayed. To switch between C and F. press and hold both buttons (▲/ ▼)
simultaneously for approximately 5 seconds.
i
12
Note: The beverage refrigerator is equipped with a temperature memory function. If power
is suddenly lost, the previously set temperature will be saved and the Refrigerator will
return to this setting once power is restored. Allow at least 24 hours before storing your
beverages to allow the setting temperature to be reached.
!
Caution: If you turned the unit o, please wait at least 5 minutes before turning it back on.
!
Normal Sounds
Your new beverage refrigerator may make noise during normal operation. Most of these sounds are
normal. Hard surfaces like the oor and walls can make sounds seem louder than they actually are.
The following describes several sounds you may hear and what may be making them:
• Rattling noises may come from the ow of the refrigerant or the water line. Items stored on top of the
beverage refrigerator can also make noises.
• The high eciency compressor may make a pulsating or high-pitched sound.
• Water running from the evaporator to the water bin may make a splashing sound.
• As each cycle ends, you may hear a gurgling sound due to the refrigerant owing in your beverage
refrigerator.
Warning:
• Do not touch the power plug when your hands are wet.
• Never unplug the unit by pulling on the plug.
!
13
Warning: Never attempt to remove frost with a sharp object!
!
Defrosting
Preparing the Beverage Refrigerator for Storage
Note that under most refrigerating settings, the unit will automatically defrost in most ambient conditions.
However, on colder settings, some frost may build up. Additionally, the more humid the ambient
conditions, the more frost may build up. Keep the door closed as much as possible and avoid opening
the door unnecessarily to minimize frost build-up. If frost is preventing the door from closing properly,
you may need to power the unit o until the frost melts. Use a soft absorbent towel to dry the unit.
If the beverage refrigerator will not be used for a long time, or is to be moved to another place, it will be
necessary to defrost the unit and dry the interior.
1. Disconnect the Refrigerator from the power supply by removing the power plug from the wall socket.
2. Leave the door open to allow for air circulation and to prevent mold, mildew, and unpleasant smells.
Caution: Store the unit out of reach from children. If you have children, you may want to
take precautions such as removing the door to prevent a child from being trapped inside.
!
Cleaning and Maintenance
Periodic cleaning and proper maintenance will ensure eciency, top performance, and long life.
The door and cabinet may be cleaned with a mild detergent or hand soap mixed with warm water.
Do not use solvent based or abrasive cleaners. Use a soft sponge and rinse with clean water. Wipe
with a soft clean towel to prevent water spotting. If the door panel is stainless steel, it can discolor
when exposed to chlorine gas and moisture. Clean stainless steel using a cloth dampened with a mild
detergent and warm water solution. Never use an abrasive or caustic cleaning agent.
The beverage refrigerator’s interior should be cleaned occasionally.
1. Disconnect power to the unit.
2. Open the door and remove the contents and shelves.
3. Wait until the unit defrosts.
4. With a clean cloth, wipe down the interior of the unit.
5. Reinsert the shelves and items.
6. Reconnect power to the unit.
Exterior Cleaning
Interior Cleaning
14
Troubleshooting
If the unit appears to be malfunctioning, read through the “Operation” section of this manual rst. If
the problem persists, check the Troubleshooting Guide below and on the following page. The problem
may be something that can easily be solved or explained.
Before Calling for Help:
Symptoms Possible Causes Solutions
The beverage refrigerator
turns on and o frequently.
The room temperature
is higher than the
recommended ambient
environment.
Run the refrigerator at the appropriate
ambient temperature.
The door is being opened
too often.
Minimize the number of times the door
is opened.
The door is not completely
closed.
Make sure the door is completely
closed.
The door gasket is not
sealing properly.
Make sure the door gasket is sealing
properly.
The refrigerator does
not have the suggested
ventilation.
Read and follow the “Installation
Clearance Requirements” section.
The beverage refrigerator
does not turn on.
There is a power failure. Ensure that the refrigerator is plugged
in and the power outlet has power.
The refrigerator is not
plugged in.
Plug the unit in to a power outlet that
has sucient amperage.
A house fuse has blown or
the circuit breaker is tripped.
Replace the broken fuse in your fuse
box or reset the breaker.
The beverage refrigerator
will not reach the desired
temperature.
The refrigerator is placed too
close to a heat source.
Keep the refrigerator away from direct
sunlight or other heat sources.
The refrigerator does not
have sucient ventilation.
Read and follow the “Installation
Clearance Requirements” section.
The door is opened too
frequently or for a long
period of time.
Close the door tightly and do not open
the door too frequently or for a long
period of time.
The beverage refrigerator is
making strange noises.
Certain sounds are normal. Read the “Normal Sounds” section.
The unit is not level or is
touching another appliance.
Check to make sure that the
refrigerator is level, and that it is not
in contact with another appliance or
furniture.
15
Symptoms Possible Causes Solutions
The body of the beverage
refrigerator is electried.
The unit is not grounded
properly.
Contact your local electrician to test
your electrical grounding system.
Frost is forming in the
beverage refrigerator.
The environment is humid. Manual defrosting is required; unplug
the unit to allow the frost to melt. If
frost builds up frequently, you can
move the unit to a location with a
warmer temperature, minimize the
number of times you open the door, or
check the door gasket for a good seal.
The ambient temperature is
too low.
The door gasket is not
installed properly.
The door is being opened
too frequently.
The door will not shut
properly.
The refrigerator is not level. Make sure the refrigerator is on a level
surface.
The door gasket is dirty. Clean the door gasket.
The door gasket is not
installed correctly.
Make sure the door gasket is correctly
installed.
The shelves are incorrectly
installed.
Install the shelves correctly.
16
Specications
Note: Technical data and performance information are provided for reference only.
Specications are subject to change. Check the rating label on the beverage refrigerator
for the most accurate information.
!
Product Type Beverage Refrigerator
Model BWC71SS
Voltage / Frequency AC 115V~60Hz
Amperage 1.3A
Color Black Cabinet; Stainless Steel Door
Refrigerant R600a
Storage Capacity 52 Cans*
Temperature Range 38°F - 65°F
Dimensions
(Height x Width x Depth )
20 ⁵/16” x 17 ³/
16
” x 18 ¹/2”
Net Weight 38 lbs
*Note: The beverage capacity of the cooler is 52 standard 12 oz. cans.
!
17
EdgeStar Limited Warranty
WHAT IS COVERED:
LABOR: For a period of NINETY (90) DAYS from the date of original purchase, labor will be performed free of charge at an authorized EdgeStar
repair facility. At its option, EdgeStar will repair the product with new or remanufactured parts, or exchange the defective product with a new,
refurbished, or remanufactured product. If a product is replaced, it will carry the remaining warranty of the original product. After the ninety (90)
day period, EdgeStar will no longer be responsible for labor charges incurred. All defective products and parts covered by this warranty will be
repaired or replaced on a mail-in basis to an EdgeStar authorized repair facility.
PARTS: For a period of ONE (1) YEAR from the date of original purchase, EdgeStar will supply new, rebuilt, or refurbished parts free of
charge. EdgeStar may request a defective part be returned in exchange for the replacement part. All replacement parts or products will be new,
remanufactured, or refurbished. All products and parts replaced by EdgeStar under warranty service become the property of EdgeStar.
This warranty applies to the original purchaser only, and only covers defects in workmanship experienced during operation of the product under
normal service, maintenance, and usage conditions. This warranty applies to the purchase and use of this product in residential settings within
the contiguous United States of America.
WHAT IS NOT COVERED- The following limitations apply to the coverage of this warranty. This warranty does not cover:
• Labor charges for installation, setup or training to use the product.
• Shipping damage, and any damage caused by improper packaging for shipment to an authorized service center, and any damaged caused
by improper voltage or any other misuse, including abnormal service, handling, or usage.
• Cosmetic damage such as scratches and dents.
• Normal wear and tear on parts or replacement of parts designed to be replaced, e.g. lters, cartridges, batteries.
• Service trips to deliver, pick-up, or repair, install the product, or to instruct in proper usage of the product.
• Damages or operating problems resulting from misuse, abuse, operation outside environmental specications, uses contrary to instructions
provided in the owner’s manual, accidents, acts of God, vermin, re, ood, improper installation, unauthorized service, maintenance negligence,
unauthorized installation or modication, or rental or commercial use.
• Labor, service transportation, and shipping charges incurred 91 days or more after the date of original purchase.
• The use of EdgeStar products in commercial or rental settings.
• Optional accessories, attachments, and appearance items.
• Products that have been modied to perform outside of specications without the prior written permission of EdgeStar.
• Products lost in shipment, or theft.
• Products sold AS IS or from an unauthorized reseller.
• Products that have had their serial numbers removed or defaced. Products with serial numbers that have been invalidated.
• Damage to personal property from use of product.
• Replacement of repair of household fuses, circuit breakers, wiring, or plumbing.
OBTAINING WARRANTY SERVICE: If you believe your product is defective, contact EdgeStar Customer Support for troubleshooting
assistance and warranty service at www.edgestar.com or call 1-866-319-5473. Before contacting Customer Support you are required to have
your model number, serial number, and proof of purchase available upon request. Once an EdgeStar authorized representative has conrmed
that your product is defective and eligible for warranty service, the product must be returned to an EdgeStar authorized repair facility. EdgeStar
is not responsible for damage resulting from shipper mishandling or improper packaging. Do not return a defective product to the place of
purchase. Products received without a return authorization number will be refused.
THIS WARRANTY IS IN LIEU OF ANY OTHER WARRANTY, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, ANY WARRANTY
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. TO THE EXTENT ANY IMPLIED WARRANTY IS REQUIRED
BY LAW, IT IS LIMITED IN DURATION TO THE EXPRESS WARRANTY PERIOD ABOVE. NEITHER THE MANUFACTURER NOR ITS
DISTRIBUTORS SHALL BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF
ANY NATURE, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR PROFITS, OR ANY OTHER DAMAGE WHETHER BASED IN
CONTRACT, TORT, OR OTHERWISE. IN NO EVENT AND UNDER NO CIRCUMSTANCE OF ANY TYPE OR KIND SHALL THE SELLER,
MANUFACTURER AND/OR DISTRIBUTOR BE LIABLE FOR ANY REASON, UNDER ANY THEORY, FOR MORE THAN THE BASIC COST
OF THE PRODUCT TO THE PURCHASER OR END USER. SOME STATES DO NOT ALLOW THE EXCLUSION OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES, SO THE ABOVE EXCLUSION MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL
RIGHTS. YOU MAY HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE.
One (1) Year Parts & Ninety (90) Days Labor
This product is warranted by EdgeStar and is subject to any conditions set forth as follows:
www.edgestar.com ©2021 EdgeStar
