Loading ...
Loading ...
Rev. E 03/23
3
Owner’s Manual | MA-870
Operation
This Axial Fan is designed to offer efficient air circulation and ventilation with its high and long-distance focused airflow.
It’s perfect for air circulation and ventilation in janitorial, sanitation jobs, water damage restoration and more.
To turn Axial Fan on, press the power button located on top of the Axial Fan.
Secure Operation Position
The Axial Fan features 360º rotation. Tilt the Axial Fan to desired angle and tighten stand knobs to secure the fan position.
To turn Axial Fan on, press the power button located on top of the Axial Fan.
Transportation
Transport the Axial Fan
using the handle on top
of the unit.
Wall Installation
Wood Structures:
Locate the wall or ceiling stud nearest to the desired Fan location.
Attach the fan to the stud using a 1/2” diameter x 3” long Lag
Screw and washer (not supplied). This lag screw must be
installed in the brackets’ center hole. Next, install on both sides
of the bracket center hole, 2 additional Lag Screws and washers
(not supplied) into drywall with appropriate anchors or wood studs.
NOTE: Always install the yoke to a minimum 2 x 4 studding.
Steel Structures:
Attach the fan using (qty. 3) 1/2” bolts of the appropriate length,
with flat washers, lock washers and a 1/2” nuts (not supplied).
Masonry Structures:
Attach using (qty. 3) 1/2” lag screws, with a lag shield of appropriate length (not supplied).
NOTE: In all cases, it is required that 3 screws and flat washers be used on the fan to assist
in smooth rotation and safety.
Stack Multiple Units
Stack the axial fans on top of each
other as shown.
WARNING
Do not stack more than three
units of this appliance.
Stacking function is not secure
during transportation.
Stand Installation
Place rubber gasket between
fan housing and bracket.
Align the hole in the rubber
gasket and bracket.
Thread the bracket screw
through the rubber gasket and
bracket into the fan housing.
Center Hole for Lag Bolt and Washer
Wall Stud Mounting
Loading ...
Loading ...
Loading ...