Hikvision IK-4142BH-MH/P User Manual

Loading ...

Network Video Recorder User Manual

defined virtual region.

Steps

1. Go to Configuration → Event → Smart Event → Intrusion.

2. Set Camera.

3. Turn on Enable.

4. Optional: Check Save VCA Picture to save the captured pictures of VCA detection.

5. Set the detection rules and detection areas.

1) Set Arming Area. Up to 4 arming areas are selectable.

2) Adjust Time Threshold and Sensitivity.

Sensitivity

The size of the object that can trigger the alarm. The higher the value is, the more easily

the detection alarm will be triggered. Its range is [1-100].

Time Threshold

Range [1s-10s], the threshold for the time of the object loitering in the region. When the

duration of the object in the defined detection area is longer than the set time, the alarm

will be triggered.

3) Optional: Set Target Detection as Human or Vehicle to discard alarms which are not

triggered by human body or vehicle.

Note

This function is only available for certain models.

4) Click Draw Area and draw a quadrilateral in the preview window by specifying four vertexes

of the detection region.

6. Set the arming schedule. Refer to Configure Arming Schedule for details.

7. Set the linkage actions. Refer to Configure Alarm Linkage Action for details.

8. Click Apply.

Region Entrance Detection

Region entrance detection function detects people, vehicles or other objects which enter a pre-

defined virtual region from the outside place, and some certain actions can be taken when the

alarm is triggered.