Loading ...
Loading ...
Loading ...
13
If a pan is placed on the induction hob, the main
screen also shows the following information:
∙ Pan position
∙ Pan size
∙ Power Level
Power Boost
The power boost is a function that temporarily boosts
the power to a cooking zone.
To activate the power boost:
1. Select the pan of your choice.
2. Select power level “B” or swipe to power level “B”.
The power boost is activated. The pan on the display
shows “B”.
4
After 10 minutes the power boost is
automatically switched off.
To deactivate the power boost.
1. Select the pan that uses the power boost.
2. Select another power level or swipe to another
power level.
The power boost is deactivated. The pan on the display
shows the selected power level.
Residual heat indicators
If the cook zone is switched off and the glass surface
is above 60°C , H will be displayed in the cook
zone display until the glass surface drops below
approximately 55°C.
This feature not only warns you against hot surfaces
but also indicates that there is residual heat which can
be used as temporary warm zone.
4
Note - The cook zone itself does not heat
up, but the ceramic glass does get hot
because of the hot pan conducting heat
back onto the hob glass.
Auto stand by
A cooking zone that has exceeded the maximum
operating time switches off automatically.
Power Level Maximum Operation
Time hours
Melting Function 2
Warming Function 2
Simmering function 2
1 10
1.5 10
2 5
2.5 5
3 5
3.5 5
4 4
4.5 4
5 3
5.5 3
6 2
6.5 2
7 2
7.5 2
8 2
Loading ...
Loading ...
Loading ...