Loading ...
Loading ...
Loading ...
Operation Guide 5522
E-59
Countdown Timer:
Measuring unit: 1/10 second
Countdown range: 60 minutes
Countdown start time setting range: 1 to 60 minutes (1-minute increments)
World Time: 48 cities (31 time zones)
Other: Daylight Saving Time/Standard Time; Home City/World Time City
switching
Alarms: 5 Daily alarms (with 1 snooze alarm); Hourly time signal
Illumination: LED (light-emitting diode); Selectable illumination duration
(approximately 1.5 seconds or 3 seconds)
Other: Button operation tone on/off; Moving the Hands to View the Digital Display
E-58
Specifications
Accuracy at normal temperature: ±15 seconds a month
Digital Timekeeping: Hour, minutes, seconds, p.m. (P), month, day, day of the
week
Time format: 12-hour and 24-hour
Calendar system: Full Auto-calendar pre-programmed from the year 2000 to 2099
Other: Home City code (can be assigned one of 48 city codes);
Standard Time/Daylight Saving Time (summer time)
Analog Timekeeping: Hour, minutes (hand moves every 20seconds)
Stopwatch:
Measuring unit: 1/100 second
Measuring capacity: 23:59' 59.99"
Measuring modes: Elapsed time, split time, two finishes, Direct timing start from
the Timekeeping Mode, Target Time Alarm
E-57
* Graphic display in each mode occurs as described below.
Mode Flashing
Timekeeping Appears and disappears in time with the seconds of
the current time.
Stopwatch Flashes in time with the minutes.
Countdown Timer Flashes in time with the minutes.
World Time Appears and disappears in time with the seconds of
the current time in the World Time zone.
E-56
Main Indicators
Number Name See
1
1
Graphic* E-57
2
2
Target Time operation in
progress
E-30
3
3
PM indicator E-17
4
4
Snooze alarm on indicator E-46
5
5
Alarm on indicator E-44
6
6
Hourly time signal on indicator E-46
7
7
DST indicator E-20, E-41
8
8
Hands shifted indicator E-14
2
1
7 8643 5
E-55
World Time Mode
■ The time for my World Time City is off in the World Time Mode.
This could be due to incorrect switching between standard time and daylight saving
time. See “To specify standard time or daylight saving time (DST) for a city” (page E-41)
for more information.
E-54
Troubleshooting
Hand Movement and Indications
■ The time indicated by the hands is different from the digital time.
This could indicate that the watch has been exposed to magnetism or strong
impact, which has caused problems with proper hand alignment. Adjust the watch’s
hand home position alignment (page E-49).
Time Setting
■ The current time setting is off by hours.
Your Home City setting may be wrong (page E-18). Check your Home City setting and
correct it, if necessary.
■ The current time setting is off by one hour.
You may need to change your Home City’s standard time/daylight saving time
(DST) setting. Use the procedure under “Adjusting the Digital Time and Date
Settings” (page E-21) to change the standard time/daylight saving time (DST) setting.
E-53
3. Press D to toggle the setting between KEY (ON) and MUTE (OFF).
4. After all the settings are the way you want, press A to exit the setting screen.
E-52
Button Operation Tone
You can turn the button operation tone on or off as
desired.
x Even if you turn off the button operation tone, the
Target Time Alarm, alarms, the Hourly Time Signal,
and other beepers all operate normally.
To turn the button operation tone on and off
1. In the Timekeeping Mode, hold down A until the
flashing SET Hold indicator disappears from the
display and the currently selected city code flashes
on the left side of the lower display.
2. Press C nine times to display the button operation
tone On/Off screen (page E-22).
The screen will show either KEY
or MUTE.
E-51
2. If the hour and minute hands are not at 12o’clock,
use D (+) and B (–) to adjust them until they are.
x Holding down either button moves the hands at
high speed.
3. Press A to return to the Timekeeping Mode.
Check to make sure that the time indicated by the
hands matches the time on the digital display. If the
times don’t match, perform the correction procedure
above again.
Hour hand and minute hand
E-50
1. In the Timekeeping Mode, hold down A for about five
seconds until 0:00 starts to flash. Release A after
0:00 flashes.
x This enters the hour and minute hand adjustment
mode.
Loading ...