Loading ...
Loading ...
Loading ...
Operation Guide 5522
E-39
Checking the Current Time in a Different Time Zone
You can use the World Time Mode to view the current
time in one of 31 time zones (48 cities) around the
globe. The city that is currently selected in the World
Time Mode is called the “World Time City”.
x The hour and minute hands indicate information for
the currently selected Home City.
x When you enter the World Time Mode, the currently
selected city code and city name (English) scroll once
across the digital display. After that, the city code
remains displayed.
x You can view the name (English) of your Home City
by pressing A.
World Time City hour and
minute
City code of World Time City
Second
E-38
To perform a countdown timer operation
D
D D D B
Start Stop (Resume) (Stop) Reset
Countdown in Progress
To stop the alarm
Press any button.
E-37
To configure the countdown timer
x If a countdown timer operation is in progress, press D
to pause it and then press B to reset the target time to
its start time.
x If a countdown timer operation is paused, press B to
reset the timer to its start time.
1. Hold down A until the flashing SET Hold indicator
disappears from the display and the minutes digits
start to flash. Release A after the digits start to flash.
2. Use D (+) and B (–) to change the minutes setting.
x Holding down either button scrolls at high speed.
3. After all the settings are the way you want, press A to
exit the setting screen.
E-36
Countdown Timer
The countdown timer can be set within a range of
one minute to 60minutes. An alarm sounds when the
countdown reaches zero.
To enter the Countdown Timer Mode
Use C to select the Countdown Timer Mode as shown
on page E-13.
Minutes Seconds
1/10 second
E-35
Note
x TGT flashes in the above operation even if the watch is in another mode.
To stop the alert beeper
Pressing any button while the alert beeper is sounding will stop it.
x Pressing D or B operates the elapsed time operation on page E-28.
To perform stopwatch timing without using the Target Time Alarm
Use step 7 under “To set a target time” to disable the target time alarm.
E-34
(3) Target time reached
x Beep for 10 seconds.
x Screen: Changes as shown in the figure.
x TGT becomes unlit.
(4) After target time is expired
x Screen: The top right indicator that indicates minutes flashes (at slow speed).
x Elapsed time is measured, with TGT remaining unlit.
x Resetting the elapsed stopwatch time automatically causes TGT to re-appear.
You can re-use the same target time, if you want.
E-33
(2) From target time half until target time is reached
x Screen: As shown in the figure, all of the part that
indicates minutes flashes.
x TGT flashes at high speed starting from one minute
before the target time.
E-32
x You can get an idea of time elapsed until the target time from changes in the
display.
(1) From start up to half of target time
x Screen: As shown in the figure, top right indicator
that indicates minutes flashes.
x TGT starts to flash.
E-31
7. Press D to toggle the target alarm between on ( displayed) and off (
displayed).
x The indicator TGT will be displayed in the Stopwatch Mode while the target
time is on.
8. After all the settings are the way you want, press A to exit the setting screen.
To use the target time alarm
1. Reset the stopwatch to all zeros and then press D.
This will cause TGT to flash on the display.
2. Now you can perform the same operations as those in the steps on page E-28.
(1) (2) (4)
(3)
Start
Target time
E-30
To set a target time
1. Reset the stopwatch to all zeros.
2. Hold down A until the flashing SET Hold indicator
disappears from the display and the hour digit
starts to flash. Release A after the hour digit starts
to flash.
3. Use D (+) and B (–) to change the hour setting.
x Holding down either button scrolls at high speed.
x For a target time of 24 hours, set 00hours
00minutes.
4. Press C to switch to the minutes setting.
5. Use D (+) and B (–) to change the minutes setting.
x Holding down either button scrolls at high speed.
6. Press C to display the target time alarm on/off
setting.
Hours
Target Time operation in
progress
Loading ...
Loading ...
Loading ...