Loading ...
Loading ...
Loading ...
Standard accessories
Important Safety Instructions ......................... 1 pc.
Attachment plate ×1
Bit ×1(Hex wrench,
screw size 6.35 mm
{1/4 inches} T20)
Grommet ×2
(of them, 1 for spare)
Attachment for the conduit x1
Fixing screw for attachment
plate (M4 x 8 mm
{5/16 inches}) ×5
(of them, 1 for spare) Rain wash coating label ×1
Template ×1 RJ45 cap ×1 Cable for easy kitting
*1
×1
*1 The cable for easy kitting is attached to the camera.
Other items that are needed (not included)
• Mounting screws
Installation method
Recommended
screw
*1
Minimum pull-out
strength
*2
Mount the camera on a gangbox/ junction box using
the attachment plate.
M4 × 16 mm
{5/8
inches} × 4pcs.*
3
196 N {44
lbf}
Directly mount the camera onto the installation surface
using the attachment plate.
Mount the camera using the exclusively designed mount bracket.
Refer to the operating instructions of each
bracket.
*1 Select screws according to the material of the location that the camera will be mounted to. In this
case, wood screws and nails should not be used.
*2 This value indicates the minimum pull-out strength required value per screw. For information about
the minimum pull-out strength, refer to our technical information website <Control No.: C0120>.
*3 The screw length is an example when installing the camera on a robust installation surface with a
thickness of 20 mm {25/32 inches} or more.
• Ethernet cable with RJ45 plug (category 5e or better, straight, all 4 pairs (8pins), less than 100m {328 feet})
• As necessary, audio input cable, audio output cable, alarm I/O cables, power supply cable
6
Loading ...
Loading ...
Loading ...