Loading ...
Loading ...
Loading ...
9 10
Description of “ ” button and indicators
Description of Remote Control Panel
Buttons and Indicators
Note
Product Description
On/Off
Direction Control button
Mode Settings button
Strong button
Return to Charge Mode
Button
Install two AAA batteries before use. In the vicinity of the charging dock, the machine may not be able to
recognize the commands from the remote control. If you do not use the remote control for a long time,
remove the batteries.
1 Turn on the power switch at the bottom of the machine. If the machine is on the ground and
working normally, the indicator will flash slowly in blue.
2 “ ” clean button, the buzzer beeps, and the indicator first flashes quickly in blue; if the
machine runs normally, the indicator stays blue, or else the machine resumes standby and
the indicator restores the original state;
3 In case of failure during operation, the indicator reacts according to different faults. See
Troubleshooting on P38 below;
4 When the battery is low, the indicator flashes quickly in red;
5 In charging state (when the machine is placed on the charging dock or connected with the
adapter), the indicator flashes slowly in red; when fully charged, the buzzer beeps 5 times,
the red indicator goes out, and the blue indicator turns on.
1 You can use the remote control like the remote control of the TV. Turn on the switch on the
bottom of the machine and press the “ ” button to control the machine with the buttons on
the remote control. (The machine enters sleep state if there is no operation in one minute;
you can press “ ” to wake it up. If there is no operation in 15 minutes, the machine power
turns off, and you need to press the “ ” button on the machine to turn it on)
2 : When the machine is in standby state, press to make it enter cleaning mode. Press
the direction buttons to control the direction in which the machine travels
3 : When the machine is in standby or cleaning state, press to make it enter return mode
and look for the charging dock.
4 : When the machine is in standby state, press to make it enter the cleaning state directly.
When the machine is in cleaning state, you can press to switch the cleaning mode. For
details, see P33-P34.
5 : Press on the remote control to enter strong cleaning mode. (Strong cleaning mode is
to increase the suction power in spot cleaning mode.)
Loading ...
Loading ...
Loading ...