Loading ...
Loading ...
Loading ...
Chapter 3 Hardware
NWA/WAC/WAX Series User’s Guide
51
Figure 22 WAC5302D-S LEDs
The following table describes the LEDs.
Table 17 WAC5302D-S LEDs
LED COLOR STATUS DESCRIPTION
PWR/SYS Amber Blinks amber for 1
second and green for 1
second alternatively.
The LED blinks amber and green alternatively when the
WAC is booting up.
Green
Green On The Zyxel Device is ready for use.
Slow Blinking (On for 1s,
Off for 1s)
The wireless module of the Zyxel Device is disabled or
failed.
Fast Blinking (On 50 ms,
Off 50 ms)
The Locator LED is on.
Red On There is system error and the Zyxel Device cannot boot
up, or the Zyxel Device suffered a system failure.
Fast Blinking (On for
50ms, Off for 50 ms)
The Zyxel Device is doing firmware upgrade.
Slow Blinking (Blink for 3
times, Off for 3s)
The Uplink interface is down.
Slow Blinking (Blink for 2
times, Off for 3s)
The Zyxel Device is managed by an AC and the uplink is
disconnected.
Management Green On The Zyxel Device is managed by a controller.
Slow Blinking (Blink for 3
times, Off for 3s)
The Zyxel Device is searching (discovery) for a controller.
Slow Blinking (On for 1s,
Off for 1s)
The Zyxel Device is using default wireless settings, or the
Zyxel Device is connected to the NCC but is unregistered
with the NCC.
Off The Zyxel Device is in standalone mode.
Loading ...
Loading ...
Loading ...