Loading ...
Loading ...
Loading ...
Chapter 29 Troubleshooting
NWA/WAC/WAX Series User’s Guide
247
Note: This procedure removes the current configuration.
1 Make sure the Power LED is on and not blinking.
2 Press the RESET button and hold it until the Power LED begins to blink. (This usually takes about ten
seconds.)
3 Release the RESET button, and wait for the Zyxel Device to restart.
You should be able to access the Zyxel Device in standalone mode using the default settings.
29.7 Getting More Troubleshooting Help
Search for support information for your model at www.zyxel.com for more troubleshooting suggestions.
Loading ...
Loading ...
Loading ...