Loading ...
Loading ...
Loading ...
PTZ camera (QNP-6320H/QNP-6250H)
22_ PTZ camera (QNP-6320H/QNP-6250H)
3. Plug the cable bushing of the network cable in the hole.
When plugging it in, press the whole bushing area evenly so that it is properly plugged in.
J
`
The length and width of the cable bushing are different. Check the shape and plug it in the right direction.
4. Install the bushing clip.
Let the arrow mark on the clip point in the direction of the safety wire hook, and click each side into place
one at a time.
5. After aligning the installation direction guides of the hanging mount, push the main cover upward and turn
it counterclockwise until it is secured.
6. Tightly fasten the 3 mounting screws on the top side of the mount.
TR30
Loading ...
Loading ...
Loading ...