Loading ...
Loading ...
Loading ...
Installation
English26
Flooring
For best performance, the Laundry Hub must be installed on a solid floor. Wood floors may need to be
reinforced to minimise vibration and/or unbalanced loads. Carpeting and soft tile surfaces do not resist
vibration well and may cause the Laundry Hub to move slightly during the spin cycle.
CAUTION
Do NOT install the Laundry Hub on a platform or a poorly supported structure.
Water temperature
Do not install the Laundry Hub in areas where water may freeze as the Laundry Hub always retains some
water in its water valves, pumps, and/or hoses. Frozen water left in the connection parts may cause damage
to belts, the pump, and other components of the Laundry Hub.
Washer requirements
Electrical supply and grounding
• Use an individual branch circuit specific to the Laundry Hub.
To ensure proper grounding, the Laundry Hub comes with a power cord featuring a three-prong grounding
plug for use in a properly installed and grounded outlet.
Check with a qualified electrician or service person if you are not sure about the grounding.
Do not modify the provided plug. If it does not fit the outlet, call a qualified electrician to install a suitable
outlet.
WARNING
• Do NOT use an extension cord.
• Use only the power cord that comes with the Laundry Hub.
• Do NOT connect the ground wire to plastic plumbing, gas lines, or hot water pipes.
• Improperly connected grounding conductors may cause electric shock.
• Do not remove or modify the grounding pin of power cord to reduce the risk of electric hazard.
• Please use the additional grounding wire provided with this appliance if there is no hole for earth pin in
power inlet socket.
• To prevent unnecessary risk of fire, electrical shock, or personal injury, all wiring and grounding must be
done in accordance with local codes, or in the absence of local codes, in accordance with the National
Electrical Code, ANSI/NFPA No. 70-Latest Revision (for the U.S.) or the Canadian Electrical Code CSA
C22.1 – Latest Revisions and local codes and ordinances. It is your responsibility to provide adequate
electrical service for your washer.
Untitled-1 26 2023-12-18() 5:49:24
Loading ...
Loading ...
Loading ...