Loading ...
Loading ...
Loading ...
14
REMOVING AND REPLA
CING
REFRIGERATOR DOORS
WARNING
Risk of electric shock!
Before removing top hinge cover
•
Shut off the water supply to the appliance.
• U nplug the appliance or switch off power from the
breaker or fuse panel.
To remove the left refrigerator door:
1.
Remove top hinge cover using a phillips screwdriver by
removing 5 screws.
2.
Remove the hinge grounding wire screw and pull the
two grounding wire connections away from the hinge.
Disconnect the three wire harnesses and the water
tube. Push in the small first ring on the connection
collar to remove the tube.
3.
Using a large phillips screwdriver, turn top hinge
fastener counterclockwise to remove the top hinge
plate.
CAUTION:
After the hinge is removed, the door can
fall down forward. Hold the door to prevent it from
falling.
4.
Lift the door from the middle hinge pin and remove
the door. Place the door, inside facing up, on a non-
scratch surface.
To remove the right refrigerator door:
1.
Remove top hinge cover using a phillips screwdriver by
removing 5 screws.
2.
Using a large phillips screwdriver, turn top hinge
fastener counterclockwise to remove the top hinge
plate.
CAUTION:
After the hinge is removed, the door can
fall down forward. Hold the door to prevent it from
falling.
3.
Lift the door from the middle hinge pin and remove
the door. Place the door, inside facing up, on a non-
scratch surface.
the appliance.
down.
appliance.
2. Mount the base plate.
tighten.
If the refrigerator doors are not
9
properly aligned:
WARNING
Risk of electric shock!
Before removing the top panel:
1. Shut off the water supply to the
appliance.
5. Move the hinge sideways to adjust
the refrigerator door.
REFRIGERATOR INSTALLATION
Push In
Loading ...
Loading ...
Loading ...