Loading ...
Loading ...
Loading ...
39
Verify Reversed Dryer Door
Operation
1. Test the door for freely swinging,
smooth operation and a secure latch
when closed.
2. Plug in the dryer and close the door.
Start a test cycle: the drum should
tumble until the door is pulled open or
the cycle is paused or canceled.
2. Reinsert the plastic hole plugs.
INSTALLATION
Reinstalling door Assembly
1. Rotate the door and hang the upper
hook on the back of the hinge in the
upper hole of the front panel.
2. Reinstall and tighten all four screws
removed earlier - two front screws first,
then the two side screws.
Reinstalling Latch and Hole Plugs
1. Install the door latch using the
previously removed screws.
7. Reinstall all eight screws using a #2
square bit driver.
8. Verify the gasket has not separated
from the metal ring. Go back to step 5
if the gasket has separated.
9. Reinstall the striker and previously
removed screws.
10. Reinstall the hinge cover.
Loading ...
Loading ...
Loading ...