Loading ...
Loading ...
Loading ...
7
5. Turn the camera clockwise until it snaps into the
installation plate.
Figure 2-20 Snap Camera into Installation Plate
6. Connect the power cord and video cable.
7. Power on the camera to check whether the image on
the live view is captured from the optimum angle. If
not, adjust the camera according to the figure below.
Rotation Position
[0° to 360°]
Pan Position
[0° to 360°]
Tilt Position
[0° to 75°]
Figure 2-21 3-Axis Adjustment
1). Rotate the enclosure to adjust the pan position [0°
to 360°].
2). Move the main body up and down to adjust the
tilt position [0° to 75°].
3). Rotate the main body to adjust the rotation
position [0° to 360°].
2.2.2 Ceiling Mounting with Junction Box/Inclined
Ceiling Mount
Before you start:
You need to purchase a junction box or inclined ceiling
mount in advance.
Ceiling mounting with junction box and inclined ceiling
mount are similar. Following steps take junction box as
an example.
Steps:
1. Paste the drill template for junction box to the place
where you want to install the camera.
2. (Optional) For cement ceiling, drill the screw holes
with a 5.5 mm drill and insert the supplied wall plugs.
Figure 2-22 Drill Template
3. (Optional) Drill the cable hole, when the cables are
routed through the wall.
4. Take apart the junction box.
5. Install the installation plate to the junction box cover
with three PM4 screws.
Loading ...
Loading ...
Loading ...