Snow Joe 24V-SS13.5-XR-SJB 24-Volt* IONMAX Cordless Snow Shovel Kit 13.5 Inch W5.0-Ah Battery and Charger Directional Control

24V-SS13.5-XR-SJB - English Manual - Page 8

For 24V-SS13.5-XR-SJB.

PDF File Manual, 16 pages, Read Online | Download pdf file

24V-SS13.5-XR-SJB photo
Loading ...
Loading ...
Loading ...
8
Unpacking
Carton Contents
Cordless snow shovel upper pole assembly
Cordless snow shovel lower pole assembly
• Auxiliary handle
24V* IONMAX lithium-ion battery
24V* IONMAX lithium-ion battery charger
Manual with registration card
1. Carefully remove the cordless snow shovel and check to
see that all of the above items are supplied.
2. Inspect the product carefully to make sure no breakage or
damage occurred during shipping. If you find damaged or
missing parts, DO NOT return the unit to the store. Please
call the Snow Joe
®
+ Sun Joe
®
customer service center at
1-866-SNOWJOE (1-866-766-9563).
NOTE: Do not discard the shipping carton and packaging
material until you are ready to use your new cordless snow
shovel. The packaging is made of recyclable materials.
Properly dispose of these materials in accordance with local
regulations.
IMPORTANT! The equipment and packaging material are
not toys. Do not let children play with plastic bags, foils or small
parts. These items can be swallowed and pose a suffocation risk!
Battery Pack Operation
The equipment is powered by a lithium-ion battery. The battery
pack is completely sealed and maintenance free.
mWARNING! Before first use, the battery requires at
least 2 hours 5 mins charge time to be fully charged. When the
battery is at low capacity, recharge for 2 hours 5 mins again
before resuming operation.
Battery Charge Level Indicator
The battery pack is equipped with a push button for checking
the charge level. Simply press the push button to read off the
battery charge level from the LEDs of the battery indicator:
All 3 level monitoring LEDs are lit: Battery charge level
is high.
2 level monitoring LEDs are lit: Battery charge level is
decreasing. Stop work as soon as possible.
1 level monitoring LED is lit: Battery is flat. Stop work
IMMEDIATELY and charge the battery. Otherwise the
battery’s service life will be greatly shortened.
NOTE: If the charge level button does not appear to be working,
connect the battery to the charger and charge
as needed.
NOTE: Immediately after using the battery pack, the charge level
button may display a lower charge than it will if checked a few
minutes later. The battery cells “recover” some of their charge
after resting.
Charger Operation
m
WARNING! Charge only 24V* IONMAX lithium-ion
battery packs with their compatible 24V* IONMAX lithium-ion
charger. Other types of batteries may cause personal injury
and damage.
To reduce the risk of electric shock, do not allow water to flow
into the charger's AC/DC plug.
When to Charge the IONMAX 24VBAT-XR
Lithium-Ion Battery
NOTE: The IONMAX 24VBAT-XR lithium-ion battery packs do not
develop a "memory" when charged after only a partial discharge.
Therefore, it is not necessary to run down the battery pack
before placing it into the charger.
Use the battery charge indicator lights to determine when to
charge your IONMAX 24VBAT-XR lithium-ion battery pack.
You can "top-off" your battery pack's charge before starting a
big job or after a long day of use.
Charging the Battery
1. Press the push lock buttons on the battery to pull the
battery pack out of the equipment (Fig. 1).
Charge level button
The battery is at 30% capacity
and requires charging
The battery is at 60% capacity
and requires charging soon
The battery is at full capacity
Light IndicatorsLights
Loading ...
Loading ...
Loading ...