FLUKE TI300+ 60HZ User Manual for the Fluke Ti300+ Thermal Imaging Camera, 320 x 240, -4 to 1202°F

Loading ...

Ti300 PRO, Ti300+, Ti400 PRO, Ti401 PRO, Ti450 PRO, Ti450 SF6, Ti480 PRO

Users Manual

Auto Capture

Start Capture

Select to capture and save an infrared image, or series of images

based on Auto Capture settings.

Interval

Sets the number of hours, minutes, or seconds between image

captures.

Note

The minimum interval available can be affected by the file type

and visible light camera settings. Some combinations create

larger file sizes that take longer to capture and save and create a

higher minimum interval compared to others.

Image Count

Sets a number of images to capture. Or, select Maximum Memory

to capture and save images until the chosen storage memory is full or

the battery runs out of power.

Manual Trigger

Select to immediately capture images when Start Capture is

selected.

Temp Trigger

Select to capture images when a value is above or below a set

temperature limit when Start Capture is selected.

Set Temp Trigger

With Temp Trigger selected, set the temperature and conditions to

trigger the auto capture of images.

Wireless

Bluetooth

Uses Bluetooth technology to connect the Imager to a device such as

a wireless headset. See Wireless Connectivity.

WiFi Hotspot

Uses the Imager to create a wireless Hotspot when no WiFi network

exists. See Wireless Connectivity.

WiFi Network

Connects the Imager to a WiFi network so you can sign into your

Fluke Connect account on the Imager. See Wireless Connectivity.

Table 12. Camera Menu (cont.)

Option Menu Option Description

1.888.610.7664 sales@GlobalTestSupply.com

Fluke-Direct.com

Loading ...

FLUKE TI300+ 60HZ Ti300+ Thermal Imaging Camera, 320 x 240, -4 to 1202°F